Why won't programs load on Windows 10? How to run a program of interest as an administrator
There are often times when you try to play old game, but it doesn’t start. Or, on the contrary, you want to try out new software, you download and install the latest version, and in response there is silence or an error.
And it also happens that it’s quite working application stops working out of the blue, although there were no signs of trouble.
Why programs won't start on Windows 10 and how to fix it
If you start listing everything possible reasons, for which one or another application does not start or gives an error, then even a day is not enough to sort everything out. It just so happens that the more complex the system, the more it contains additional components for applications to run, the more errors can occur while programs are running.
In any case, if certain problems arise on your computer, you need to start “prevention” by searching for viruses in file system. For greater productivity, use not just one antivirus, but two or three defender programs: it will be very unpleasant if you miss some modern analogue of the “Jerusalem” virus or something worse. If threats to your computer have been detected and infected files have been cleaned, the applications must be reinstalled.
Windows 10 may throw an error when trying to access certain files and folders. For example, if there are two accounts on one computer, and when installing the application (some have such a setting) it was indicated that it is available only to one of them, then the program will not be available to the other user.
During installation, some applications provide a choice of who will have access to the program after installation
Also, some applications may well run with administrator rights. To do this, select “Run as administrator” from the context menu.
From the context menu, select "Run as administrator"
What to do when applications from the “Store” do not launch
Often programs installed from the Store stop running. The exact cause of this problem is unknown, but the solution is always the same. You need to clear the cache of the Store and the application itself:
Reinstallation and re-registration of Store applications
You can solve the problem with an application whose installation was incorrect by uninstalling it and then installing it from scratch:
You can also solve the problem by re-registering applications, created in order to fix possible problems with the rights to interact between the program and the OS. This method re-enters application data into the registry.
Why games won't launch and how to fix it
Often, games do not launch on Windows 10 for the same reasons that programs do not launch. At their core, games are the next stage in the development of applications - they are still a set of numbers and commands, but with a more developed graphical interface.
Installer Damage
One of the most common reasons is file corruption during installation of the game on the console. For example, if the installation is from a disk, it is quite possible that it is scratched, and this makes some sectors unreadable. If the installation is done virtually from a disk image, there can be two reasons:
- damage to files that are written to the disk image;
- installing game files on bad sectors Winchester.
In the first case, only another version of the game, recorded on another medium or disk image, can help you.
You will have to tinker with the second one, since the hard drive requires treatment:
Incompatibility with Windows 10
Despite the fact that the system adopted most of its operating parameters from Windows 8, compatibility problems (especially in the early stages of release) arise very often. To solve the problem, programmers added to the standard context menu a separate item that starts the compatibility troubleshooting service:
Video: how to run a program in compatibility mode in Windows 10
Blocking the launch of the installer or installed program by antivirus
Often, when using “pirated” versions of games, their downloading is blocked by the antivirus.
Often the reason for this is the lack of a license and, according to the antivirus, strange interference of game files in the work operating system. It is worth noting that in this case the possibility of infection with a virus is small, but not excluded. So think twice before solving this problem, perhaps you should turn to a more certified source for the game you like.
To solve the problem, you need to add the game folder to the trusted environment for the antivirus (or disable it while starting the game), and during the scan the defender will bypass the folder you specified, and all files that are inside will not be subject to “inspection” and treatment.
Outdated or damaged drivers
Constantly monitor the relevance and performance of your drivers (primarily video controllers and video adapters):
For automatic installation drivers is required for Windows Update to be enabled. To do this, open the Run window by pressing Win + R. Enter the command services.msc. Find the Windows Update service in the list and double-click on it. In the window that opens, click the “Run” button.
Video: How to enable or disable Windows Update in Windows 10
Lack of administrator rights
Rarely, but there are still cases when administrator rights are required to run the game. Most often, this need arises when working with applications that use some system files.
Video: how to create an administrator account in Windows 10
Problems with DirectX
Problems with DirectX rarely occur in Windows 10, but if they do appear, they are usually caused by damaged dll libraries. Also, your hardware with this driver may not support DirectX update up to version 12. First of all, you need to use the DirectX online installer:
- Find the DirectX installer on the Microsoft website and download it.
- Run the downloaded file and, using the wizard’s prompts for installing libraries (you must click the “Next” button), install available version DirectX.
For installation latest version DirectX make sure your video card driver does not need to be updated.
Video: how to find out the DirectX version and update it
Lack of required version of Microsoft Visual C++ and .NetFramtwork
The DirectX problem is not the only one that is related to insufficient equipment software.
Products Microsoft Visual C++ and .NetFramtwork are a kind of plugin base for applications and games. The main environment for their application is development program code, but at the same time they act as a debugger between the application (game) and the OS, which makes these services necessary for the functioning of graphic games.
Similarly with DirectX, these components are either downloaded automatically during an OS update or from the Microsoft website. Installation takes place in automatic mode: You just need to run the downloaded files and click “Next”.
Invalid path to executable file
One of the most simple problems. The shortcut that ended up on the desktop as a result of installation has the wrong path to the file that launches the game. The problem could be caused by software error or because you yourself changed the letter of the name hard drive. In this case, all shortcut paths will be “broken”, because directories with the paths specified in the shortcuts will not exist. The solution is simple:
Insufficiently powerful hardware
The end consumer cannot keep up with all the gaming innovations in terms of the power of his computer. The graphical characteristics of games, internal physics and the abundance of elements are growing literally by the hour. With each new game Graphics capabilities are improving exponentially. Accordingly, computers and laptops, which for several years now cannot realize themselves when running some extremely challenging games. To avoid getting into such a situation, you should get acquainted with technical requirements even before downloading. Knowing whether the game will run on your device will save you time and effort.
If any application does not launch for you, do not panic. It is possible that this misunderstanding can be resolved with the help of the above instructions and tips, after which you can safely continue to use the program or game.
Windows 10 looks good in the background previous versions The OS is from Microsoft, but some glitches still appear in its operation, forcing users to look for a solution on the Internet. One of these problems is that Windows 10 applications do not work. Those programs that are downloaded from the Store and are located in the Start menu in the section with a tiled interface refuse to start or turn off on their own.
Application re-registration
If you actively use applications from Windows Store, and their incorrect operation causes you inconvenience, then re-registering programs, which is performed through PowerShell, will help solve the problem.
If the search doesn't work, look for the PowerShell shortcut in the C:\Windows\System32 folder. Right-click and select run as administrator.
After entering the command, re-registration of applications will begin. You need to wait for it to finish, close PowerShell and restart your computer.
If after restarting the system the applications do not start working correctly, try a more advanced option:
- Remove the programs you need.
- Using the command given above, reinstall the applications.
The same steps can be performed using the FixWin10 utility. On the "Windows 10" tab in this free program There is an item “Windows Store apps not opening Re-register all apps”. 
Click the “Fix” button next to this item to fix the error automatically.
The same thing will happen as with using PowerShell. Restart your computer after re-registering the applications and check if they start working.
Another way is to run the Windows Diagnostic Tool:
- Open Control Panel and set the display mode to Large Icons.
- Find the Troubleshooting section.
- From the menu on the left, select View All Categories.
- Run application diagnostics from the Store.
The system will check the Store for errors and try to fix them on its own, so you don't have to do anything.
Windows Store doesn't work
Sometimes people refuse to work individual applications, A all Windows Store. You can fix the problem through PowerShell using the above command, or through the Registry Editor.
Attention: making changes to the registry may affect system performance. Manually create a restore point before editing entries.
So, let's launch the store through the registry:
- Press Win+R and run the command “regedit”.
- Open the HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\SystemEventsBroker branch and set the “Start” parameter to “2”.
- Go to the HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\TimeBroker branch and set the “Start” parameter to “3”.
Close Registry Editor, restart your computer and check if the Store starts working Windows applications.
mysettings.ru
Windows 10: Applications not working
Users of Windows 10 OS periodically encounter the fact that “tiled” applications do not work, do not start, or open and immediately close. Wherein, this problem appears on its own, without any reason. However, there are options to correct this defect.
Reset Windows 10 app
In the August update of Windows 10, an option was added to restore the functionality of applications (if they do not work certain applications, and not all at once). Now, in the application settings you can clear its data (cache).
1. Go to Settings -> System -> Applications and Features.
2. In the list of applications, click on the non-working application, and then -> on the item Extra options.
3. Reset the application, as well as the storage (note that the credentials stored in the application can also be reset).
After the reset, you can check the functionality of the application.
Reinstalling and re-registering Windows 10 applications
One of the best measures that works for the majority of users in this situation is to re-register Windows 10 Store applications. This can be done by PowerShell help.
First of all, you need to run Windows PowerShell as an administrator. To do this you can Windows search 10 start typing “PowerShell”, and then right-click on the application and select run as Administrator. If the search does not work, then: go to the folder C: Windows System32 WindowsPowerShell v1.0, right-click on Powershell.exe, select run as administrator.
Copy and enter into the PowerShell window next command And press Enter:
Get-AppXPackage | Foreach (Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)AppXManifest.xml")
You need to wait until the command completes (do not pay attention to the significant number of red errors). Close PowerShell and restart the PC. Checking the functionality of Windows 10 applications.
If this option did not work, then there is a second, more advanced method:
1. Remove those applications whose launch is critical for you
2. Reinstall them
Resetting the Windows Store Cache
Try resetting the Windows 10 app store cache. To do this, press the Win+R key combination, then in the Run window that appears, enter wsreset.exe and press Enter.
After finishing, launch the applications again (if it doesn’t work right away, restart your computer).
Integrity check system files
IN command line, which is launched as an administrator (launched through the menu using the Win+X keys), you need to run the sfc /scannow command and, if no problems are identified, then another one:
Dism /Online /Cleanup-Image /RestoreHealth
It may be that problems with launching applications can be fixed using this method.
Additional options fix application launch
There is also additional ways fix the problem if the above options did not help:
- Switch the date and time zone to be automatically determined or vice versa (there are cases when this helps).
- Programs that disable tracking features in Windows 10 may also affect the performance of applications.
- In the task scheduler, you need to go to the scheduler library in Microsoft - Windows - WS. Manually run both tasks from this section. After a few minutes, you can check that applications are running.
- Control Panel -> Troubleshoot -> View All Categories -> Windows Store Apps. This will launch the tool automatic elimination errors.
- Worth checking out the following services: Client License Service, AppX Deployment Service, Tile Data Model Server. All of them must be included.
- Use system restore points.
a0x.ru
Can't open Windows 10 app
PC users often encounter a problem when Windows 10 applications do not work. There are many reasons for this. Therefore, it is impossible to single out just one. The only thing worth noting is the presence of a notification on a blue background, which indicates that the software cannot be opened due to the use of a guest account or another user, not an administrator. In any case, you can solve the problem when you cannot open an application on Windows 10. To do this, you should try the following methods.
Read also: Error: Default app reset in Windows 10
Ways to launch applications on Windows 10
If, when you try to open an application in Windows 10, a notification appears on a blue background that the selected software could not be launched, you should try the following methods.
Method No. 1. Disabling UAC
Often account control Windows records 10 does not allow to run standard applications. That's why this function It's worth turning it off for a while. To do this we do the following:
- Right-click on the Start icon and select Control Panel.
- In the new window we find the “User Accounts” section.
- Here we click on the link “Change User Account Control Settings”.
- IN open window drag the slider to the “Never notify” position, thus disabling UAC.
- After rebooting the system, check if the program is working.
Method No. 2. Resetting the application
If you were unable to launch an application from Metro Tiles, that is, a program that was downloaded from the Microsoft Store, the solution to the problem is as follows:
- Click “Start”, “Settings” and select the “System” section.
- In the new window, select “Applications and Features” from the menu on the left. Select, for example, “Store”. Click on the “Advanced options” link.
- A new window will open. Click on the “Reset” button.
- After the application is reset, we check whether the remaining programs downloaded from the Store and the service itself will open.
Method No. 3. Resetting the Store Cache
You can reset the Store cache in a few clicks. Press “Win + R” and enter (or copy) “wsreset.exe”.
The console will launch. The cache will be cleared.
Method No. 4. Reinstallation and registration of programs
You can re-register your application using the PowerShell console. To do this, do the following:
- Launch "Task Manager". Click “File”, “ New task" and enter "PowerShell" (it is better to run as Administrator through the search bar).
- The console will open. Enter "".
- We are waiting for registration to complete. If this does not help, you should use Settings to remove the non-working program and install it again.
Method No. 5. Checking the system for damaged files
If the integrity of the system Windows files 10 is broken, you should launch the command line with Administrator rights and enter “sfc /scannow”.
It also wouldn’t hurt to run the command “Dism /Online /Cleanup-Image /RestoreHealth”.
If running these commands does not help solve the problem, you should perform a system restore or run FixIt.
To learn how to solve the problem when an application does not start on Windows 10, watch the video:
SoftikBox.com
Windows 10 Store not working
- 1 Standard programs
- 2 Clearing the cache
- 3 Command line
Windows 10 is still a raw operating system. That is, of course, it was released, but problems will be caught as users use it. Therefore, some applications partially do not start or do not work at all. This is due to the fact that they are going regular updates systems that optimize Windows 10 for normal operation. So, typical mistake Today there is a situation where the store, which is an innovation from Windows 10, does not work. To fix this problem, there are several methods:
- The first is to go standard programs Windows 10
- The second is to write lines on the command line with code, correcting errors at the programmer level.
Standard programs
So for Windows start 10 suggests that we do all the work ourselves. That is, you need to run the Application Troubleshooter.
This program automatically finds and fixes errors that sometimes prevent applications from launching. If the store is working, but periodic errors occur, then the issue may be that the account was entered incorrectly. You can try to reset your password:
- Go to special page Reset password from Microsoft.
- Select one of the proposed options that is most similar to current situation.
- Determine how the Windows 10 password will be reset.
Clearing the cache
It is also useful to clear the cache if the Windows 10 account is running. This is useful for every application. To do this, you need:
- Click on the Search button.
- Enter in the Execute field and select this element in search of.
- Write wsreset.exe in the field that opens and then click OK.
See also: Launch BIOS Windows 10
Usually, after clearing the cache, the store works.
Command line
You should first try registering apps from the store again if any of them don't work. To do this, open PowerShell as administrator
and write the command:
Get-AppXPackage | Foreach (Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)\AppXManifest.xml")
When performing this application an error may occur, it should be ignored as it is related to procedures new registration. Close PowerShell and check if the store is working.
If the store itself does not work, you can try to register it again. Open a command prompt with administrator rights (usually in the CMD search). We write the following command there:
Once everything is done, you can close the command line and check if the store is working. It should be remembered that such registration can be used again if no other applications are launched. You can see a list of everything installed by opening PowerShell. Next you need to enter the code:
After this command will be executed, at work Windows desktop 10 a file called AllApps.html will appear. It contains all the applications that are installed on the system.
All these actions taken should help solve the problem.
(Visited 8,854 times, 4 visits today)
windowsprofi.ru
Store apps don't work or freeze on Windows 10
Home Windows Store apps don't work or freeze on Windows 10
In this article, we will try to solve the most common problems associated with the Windows application store.
Programs from the Windows App Store do not want to work properly or do not start at all
If you encounter various problems related to pre-installed applications from the Windows Store, then to solve it you need to re-register them in the system. Open PowerShell with administrator account rights and run the following command:
Get-AppXPackage | Foreach (Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)\AppXManifest.xml")
Please note that at runtime given command, sometimes various messages may appear related to a package registration error. Most likely this will be due to the fact that the application is already running and cannot be registered again. But you don’t have to pay attention to such messages at all. Once the process is complete, you can close PowerShell.
Problems with the Windows 10 App Store
Whenever various errors, incorrect operation, associated with the Store, or even it does not want to start, then we re-register it in the system in the same way.
Open a command prompt window with administrator rights and copy the following command there:
PowerShell -ExecutionPolicy Unrestricted -Command "& ($manifest = (Get-AppxPackage Microsoft.WindowsStore).InstallLocation + '\AppxManifest.xml' ; Add-AppxPackage -DisableDevelopmentMode -Register $manifest)"
We perform it, and after completing this procedure, close the terminal window and check the operation of the Store again. You can also re-register any application installed from the Store. In order to determine what programs are installed on your computer, you can get a list of Store applications by running the following command in PowerShell:
Get-AppxPackage | ConvertTo-Html | Set-Content "$Env:userprofile\Desktop\AllApps.html"
After completing it, a file named AllApps will appear on the Desktop and html extension. It will contain all the information on all programs that were installed through the Store.
We use the diagnostic package - a utility to fix problems with applications Windows Store
If the above steps do not correct the situation with problematic applications, then in this case you can use a special diagnostic Fix utility or work around emerging issue 67758. Download to your computer this utility and launch it. Next you will need to do not complex instructions Error Troubleshooter to help you find the problem.
If you suddenly have questions or something doesn’t work out, describe the problem that has arisen in the comments to the article, and we will definitely try to help you.
Users of Windows 10 OS periodically encounter the fact that “tiled” applications do not work, do not start, or open and immediately close. At the same time, this problem appears on its own, without any reason. However, there are options to correct this defect.
Reset Windows 10 app
In the August update to Windows 10, an option was added to restore the functionality of applications (if certain applications do not work, and not all at once). Now, in the application settings you can clear its data (cache).
1. Go to Settings -> System -> Applications and Features.
2. In the list of applications, click on the non-working application, and then -> on the Additional options item.
3. Reset the application, as well as the storage (note that the credentials stored in the application can also be reset).
After the reset, you can check the functionality of the application.
Reinstalling and re-registering Windows 10 applications
One of the best measures that works for the majority of users in this situation is to re-register Windows 10 Store applications. This can be done using PowerShell.
First of all, you need to run Windows PowerShell as an administrator. To do this, you can start typing “PowerShell” in the Windows 10 search, and then right-click on the application and select run as Administrator. If the search does not work, then: go to the folder C:\Windows\System32\WindowsPowerShell\v1.0, right-click on Powershell.exe, select run as administrator.
In the PowerShell window, copy and enter the following command and press Enter:
Get-AppXPackage | Foreach (Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)\AppXManifest.xml")
You need to wait until the command completes (do not pay attention to the significant number of red errors). Close PowerShell and restart the PC. Checking the functionality of Windows 10 applications.
If this option did not work, then there is a second, more advanced method:
1. Remove those applications whose launch is critical for you
2. Reinstall them
Resetting the Windows Store Cache
Try resetting the Windows 10 app store cache. To do this, press the Win+R key combination, then in the Run window that appears, enter wsreset.exe and press Enter.
After finishing, launch the applications again (if it doesn’t work right away, restart your computer).
Checking the integrity of system files
In the command line, which is launched as an administrator (launched through the menu using the Win+X keys), you need to run the sfc /scannow command and, if no problems are identified, then another one:
Dism /Online /Cleanup-Image /RestoreHealth
It may be that problems with launching applications can be fixed using this method.
Additional options to fix application launching
There are also additional ways to fix the problem if the above options did not help:
- Switch the date and time zone to be automatically determined or vice versa (there are cases when this helps).
- Programs that disable tracking features in Windows 10 may also affect the performance of applications.
- In the task scheduler, you need to go to the scheduler library in Microsoft - Windows - WS. Manually run both tasks from this section. After a few minutes, you can check that applications are running.
- Control Panel -> Troubleshoot -> View All Categories -> Windows Store Apps. This will launch the automatic error resolution tool.
- The following services are worth checking out: Client License Service, AppX Deployment Service, Tile Data Model Server. All of them must be included.
- Use system restore points.
GD Star Rating
a WordPress rating system
Users of Windows 10 OS periodically encounter the fact that “tiled” applications do not work, do not start, or open and immediately close. At the same time, this problem appears on its own, without any reason. However, there are options to correct this defect.
Reset Windows 10 app
In the August update to Windows 10, an option was added to restore the functionality of applications (if certain applications do not work, and not all at once). Now, in the application settings you can clear its data (cache).
1. Go to Settings -> System -> Applications and Features.
2. In the list of applications, click on the non-working application, and then -> on the Additional options item.
3. Reset the application, as well as the storage (note that the credentials stored in the application can also be reset).
After the reset, you can check the functionality of the application.
Reinstalling and re-registering Windows 10 applications
One of the best measures that works for the majority of users in this situation is to re-register Windows 10 Store applications. This can be done using PowerShell.
First of all, you need to run Windows PowerShell as an administrator. To do this, you can start typing “PowerShell” in the Windows 10 search, and then right-click on the application and select run as Administrator. If the search does not work, then: go to the folder C: Windows System32 WindowsPowerShell v1.0, right-click on Powershell.exe, select run as administrator.
In the PowerShell window, copy and enter the following command and press Enter:
Get-AppXPackage | Foreach (Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)AppXManifest.xml")
You need to wait until the command completes (do not pay attention to the significant number of red errors). Close PowerShell and restart the PC. Checking the functionality of Windows 10 applications.
If this option did not work, then there is a second, more advanced method:
1. Remove those applications whose launch is critical for you
2. Reinstall them
Resetting the Windows Store Cache
Try resetting the Windows 10 app store cache. To do this, press the Win+R key combination, then in the Run window that appears, enter wsreset.exe and press Enter.
After finishing, launch the applications again (if it doesn’t work right away, restart your computer).
Checking the integrity of system files
In the command line, which is launched as an administrator (launched through the menu using the Win+X keys), you need to run the sfc /scannow command and, if no problems are identified, then another one:
Dism /Online /Cleanup-Image /RestoreHealth
It may be that problems with launching applications can be fixed using this method.
Additional options to fix application launching
There are also additional ways to fix the problem if the above options did not help:
- Switch the date and time zone to be automatically determined or vice versa (there are cases when this helps).
- Programs that disable tracking features in Windows 10 may also affect the performance of applications.
- In the task scheduler, you need to go to the scheduler library in Microsoft - Windows - WS. Manually run both tasks from this section. After a few minutes, you can check that applications are running.
- Control Panel -> Troubleshoot -> View All Categories -> Windows Store Apps. This will launch the automatic error resolution tool.
- The following services are worth checking out: Client License Service, AppX Deployment Service, Tile Data Model Server. All of them must be included.
- Use system restore points.
Windows 8 and 10 have several built-in apps as well as special store from Microsoft, where you can download other applications. However, they may not always work properly. In addition, certain devices may also not function correctly. Windows elements, For example, "Start" and search the system.
Fixing applications not working correctly in Windows 10
There are several ways to get it back up and running system applications and applications from the Microsoft Store. Most often, each method is suitable only for a certain situation. For example, if your cache is clogged, you do not need to register with the Microsoft Store again.
It is also worth considering that some applications may not work correctly due to the fact that you have disabled “surveillance” in Windows 10. Try turning it back on. If this does not help, then proceed to the methods below.
Method 1: Clear cache
Over time, the application accumulates certain data, which sometimes causes malfunctions in its operation. In one of Windows updates from 2016 it became possible to delete the application cache system means, and not with the help third party programs, like CCleaner.
Instructions for clearing the system application cache are as follows:
If this does not help, then you can additionally reset the cache of the Windows Store itself. To do this, it is recommended to use these instructions:
Method 2: Create a new entry in MS Store
The essence of the method is to create a new account in the Windows Application Store by entering special teams. It is worth considering that this method carries certain risks, so it is quite possible that instead of the current problem, you may have others. Based on this, this method is best used when there are no more options left.
The instructions for it look like this:
Method 3: Time and date settings
The essence of this method is to make the system determine the date and time automatically or, conversely, disable this determination. However, you should understand that this method helps very rarely.
You can do it as follows:
Method 4: Reset all settings
This method is one of the most radical and involves full reset custom settings Windows 10 to factory. In this case, your personal (most of them) will remain intact, but all the changes that you made to the operating system settings will be reset.
The instructions look like this:
Method 5: Finding and fixing Windows errors
There are many ways to check Windows for various errors, as well as eliminate them later. However, within the framework of this article, we will consider a proven method with launching system utility SFC or System File Checker. It is built into the system by default, and can be launched via "Command line".
Instructions for troubleshooting using SFC in Windows 10 are as follows:
You can also use another standard utility, built into Windows - DISM. It allows you to find more errors and also corrects them much faster and more correctly. Called in a similar way with SFC, here are the instructions:
Method 6: Add a new local account
Sometimes it happens that due to failures in the local account Applications from the Windows Store may not function properly. To fix this, it may be enough to simply register a new account (local). However, you should understand that problems with applications on your main local recording You can't get rid of it this way.
Instructions for creating a new account in Windows 10 are as follows:
Method 7: Rollback to a restore point
If you have a previously created restore point, then you can roll back your system to the state it was in when you created this point. In this case, your data will not be affected, and the applications and programs installed on the computer will not be affected.