Flashing Samsung Galaxy S. How to flash a Samsung phone: flashing methods

Useful tips

Articles and Lifehacks

Many people have probably wondered about how to reflash samsung phone without contacting the service center (or asking how?). This can be done at home, for example, using a special program. It is strongly recommended to back up all files, or better yet, move them from your mobile device to your computer. These could be contacts, messages, topics, photos, videos or music. After clearing your phone of these files, you should reset all settings and reboot it. Once you are sure that everything is done correctly, you can begin preparing for flashing.

Preparing to flash a Samsung phone

First, the user will need USB drivers and high-quality firmware for his Samsung phone model. You can find the required firmware on special websites or forums. After downloading it, you can proceed to downloading special software. A pretty good program is MultiLoader. Before downloading this software, you need to make sure that its version is the latest.

Another useful tip is to remove all programs from your PC that are somehow related to Samsung, or even better, install a new operating system.

So, how to reflash a Samsung phone using the MultiLoader program?

Flashing a Samsung phone

After installing the MultiLoader program, you should launch it and select “BRCM2133”. Next, check the following boxes: “Boot”
→ directory “bootfiles”, “Factory FS”, “Rsrc1”, “Full Download”, “Amss” → file “apps_compresset.bin”.

After this, the user switches to the “Download” mode by holding down the lock, volume and phone on/off buttons for 3-5 seconds. The message “Download” that appears indicates that the operation was successful. Then the owner of the mobile phone connects it to the computer using a USB cable. After the PC detects the device, “com15 ready” appears at the bottom of the program indicating the model. The user clicks the “Download” button and waits 2-3 minutes. Once the operation is complete, he disconnects the USB cable and reboots the phone - preferably several times.

If the mobile device starts in English, you must perform “Preconfiguration” by typing the combination “*#6984125*#” → “Pre-configuration” and entering the password “*#73561*#”. After this, you need to select your country of residence and wait for the reboot. As soon as the device is ready again, enter the configuration “*2767*3855#”, which will help to completely reset the settings. Flashing is complete. It's very simple and you don't need to call

Today we will talk about how to flash different versions of Android Samsung and what programs are required for this.

Firmware reinstallation (system reinstallation) of Samsung smartphones is almost no different from flashing devices from other manufacturers. The only difference is that you need to use the right tools.

Firmware for Samsung Galaxy S7, S6 and Samsung A

To reinstall Android on Samsung of these models, you will need:

USB driver "Samsung USB Driver" (Download);
flashing program - Odin (Download);
the firmware itself (its versions for different device models can be found on the company’s official website).

Now let's move on directly to how to flash Android Samsung new models. Once everything is downloaded, you will need to unpack them. First of all, you need to install the driver. It is needed so that the computer can identify the phone. When this is done, you will need to go to the folder in which Odin was unpacked and run the executable file with administrator rights.

A program window will open, in which there will be four items on the right with the ability to select files. You need to click on each button and select the required file. They should be arranged in the following order:

for BL – BL…..tar.md5;
for AP – AP….tar.md5;
for CP – CP….tar.md5;
for CSC – CSC….tar.md5.

On the left side of the screen there are checkboxes called Auto Reboot and F.Reset Time. They are installed by default, but it is better to make sure that the appropriate options are enabled.

That's it, the program is configured. Now you need to prepare your smartphone and connect it to your computer. To do this, you will first need to put the phone into firmware mode. On Samsung, this is done by simultaneously pressing and holding three keys at once: “Power”, “Home” and “Volume Down”. You need to hold the buttons until a yellow triangle appears on the display. When it appears, release the three previously held keys and click on “Volume Up”.

The phone is ready and all that remains is to connect it to the computer via a USB cable. It may take some time before the PC detects the device. When this happens, a blue “COM” will appear in the top left corner. That's it, you can click on Start, after which the firmware process will begin. Upon completion of the system reinstallation, the phone will reboot (if the Auto Reboot option was previously selected), and the message Finish will be displayed in the firmware program.

How to flash Samsung Galaxy S3

Despite the fact that the Samsung Galaxy S3 is already a very old device, it still enjoys some popularity. The S3 is sort of the iPhone 5 of the Samsung world. This is not surprising, because these devices came out almost at the same time. Since this smartphone is quite old, the procedure for flashing this Android firmware will be slightly different.

To install the firmware you will need a program called MultiLoader (Download), firmware and USB driver. Before reinstalling the system using the specified software, you need to make sure that there are no other Samsung applications on your computer. If they are present, then they must be uninstalled.

Once MultiLoader is unpacked and the USB driver is installed, you will need to run the specified program. In it you need to select the item BRCM2133, and then check the following checkboxes: Rsrc1, Factory FS and Full Download, and then specify the paths to the firmware files: for Boot - specify the Bootfiles directory, which is located in the folder where the firmware was unpacked, and for Amss - a file called apps_compresset.bin.

Photo: Flashing Android Samsung

Now that the program is configured, you need to prepare the phone itself. To do this, you need to simultaneously hold down the “Power”, “Home” and “Volume Down” keys on it. After about 3 seconds, the message Download will appear on the screen, meaning that the phone is ready to receive files, and therefore it can be connected to the PC via USB.

Photo: Flashing Samsung Galaxy S3

If everything was done correctly before, then a few seconds after connecting the phone, MultiLoader will display the message com15 ready Samsung Galaxy S3. Now you just need to click on Download and wait for the process to complete, which takes approximately 2-3 minutes. When it completes, you will need to disconnect the USB and turn on the phone.

As you can see, the answers to how to flash Android Samsung are quite simple. But despite this, in the absence of experience it is still easy to make a mistake. In order not to turn your phone into a “brick”, it is better to make a backup copy of your smartphone, from which you can restore if troubles arise during the process of reinstalling the system.

Dear readers! If you have any questions or comments on the topic of the article, please leave them below.

Odin will be a very useful tool that will allow owners of Samsung branded products to flash their devices. The following will provide detailed instructions for flashing firmware via Odin. It is worth noting that the program was developed by professionals, so you don’t have to worry about the quality of the final result. Firmware via Odin is very simple and does not require users to have deep knowledge in certain aspects of Android devices.

Similar about Odin

The application was developed for Windows OS. After downloading the program, you get the opportunity to flash your Samsung phone or tablet. Once upon a time, Koreans used the utility only as professional software, introducing updates for their devices. Fortunately, its files were leaked onto the Internet, allowing every Samsung fan to use it. You can download the application on many fan sites dedicated to the Korean manufacturer or Android devices in general. have long ceased to be dangerous for your devices. However, not all users dare to take such radical measures, getting rid of stock ones and going free of pirated programs. It is worth noting that updating Samsung firmware via Odin will open up new capabilities of your device that are not available in stock solutions.

This is where a dilemma arises, because many people establish a certain identity that looks like this: flashing = big risk = loss of warranty on the device. But all these are just myths based on long-standing stereotypes. Nowadays there is simply an insane number of owners of Samsung devices in the world, so a measure was taken to create software that would be suitable only for these devices and only in a high-quality form. It was Odin that became such an application, “flying in” from the world of Scandinavian mythology. And here you can be 100% sure that you will definitely not harm your phone or tablet by using this program.

Program versions

In order for the firmware to be successfully installed via Odin, there are a number of different versions of the program, each of which is designed for a particular Samsung device. The main file extensions include the following: .bin, .tar and .md5. By the way, the most stable versions are 1.85, 3.07 and 3.10.6. Next, we will indicate how the Samsung firmware should be installed through Odin, and also talk about the main options of the program.

Program options

So that you don’t get lost in the Odin program, let’s take a brief tour of the main options:

Auto Reboot - if this option is checked, your device will automatically reboot after successful completion of the firmware;
Re-Partition - allows you to redistribute the file system according to factory presets (RFS);
F. Reset Time - function allows you to reset the counter of previous firmware;
PIT - if the Re-Partition function was checked in the second one, you will need to specify the path to the .pit file, which will make it possible to redistribute the device’s file system;
CSC - designed to open a file that contains data specific to certain states and operators;
PDA - the option is necessary to select the necessary files with firmware;
Phone - allows you to select the modem file that is needed for the firmware process.

You need to be extremely careful when using the Odin program. This is especially true for the Re-Partition function, because if you do not have a .pit file, then it is better not to check the box next to this option. Finally, it is worth remembering that the software is intended only for Samsung devices. Flashing other brands of phones via Odin can lead to unpleasant consequences. As alternatives, you can use FlashTools or KDZ Updater.

Preparing for the firmware process

In order for Samsung firmware via Odin to be successful, you need to complete several preparatory steps. The algorithm of actions will be as follows:

First of all, you need to download and install USB drivers for your device. If you wish, you can use Samsung Kies, when installed, the drivers will be installed automatically.
Then you need to make sure that the device has backup copies of important files that will be lost after the firmware is updated. It is advisable to create backups on an external memory card or computer.
Next, we charge the phone/tablet to 100% (or at least 80%), so that the power does not go out during the firmware process.
In the settings, enable the “USB Debugging” option, which is available in the “For Developers” section. Make sure that the Samsung Keis application is not running. Otherwise, disable it through Device Manager.

It is worth noting that when installing official firmware via Odin, the chance of damaging the device is extremely low. Of course, if you follow all the instructions. Nevertheless, all actions are performed at your own peril and risk, so if you are not sure of the final result, it is better to take your device to a service center. Next, let's move on to the firmware process itself.

Firmware process

As an example, we will describe how firmware should be installed via Odin. The algorithm is as follows:

First of all, download the official firmware for your device to your computer.
Next, enable download mode on the device. As a rule, in Samsung devices it is launched by pressing the following key combination: Power (Turn on/off the device) + Volume Down (volume down key). Then confirm the action by pressing the Volume Up button. Be sure to press the keys at the same time.
Next, launch the Odin program on the PC and make sure that the Auto Reboot and Reset Time options are checked. This is extremely important.
We connect the phone or tablet to the PC using a USB cable. After detecting your device, the program will change the color of one of the ID:COM windows.
Next, press the PDA button located in the Odin program interface and select the .tar or .md5 file.
Click on START, after which the firmware process starts. Disconnecting your device from the PC during installation is strictly prohibited.
Once your device has successfully completed the firmware process, it will automatically reboot. At this stage, you can remove the cable from the PC and start using the device. As you can see, everything is very simple.

This instruction for flashing firmware via Odin is the most common. If you adhere to all points, success awaits you!

Creating Root access to Samsung Galaxy Note 2 phones

If you need to open the “superuser” mode, then the Odin and SF-Autoroot programs can help with this. So, we follow this algorithm of actions:

Download SF-Autoroot for a specific phone model, which can be found in the “About phone” settings menu item. The files themselves can be easily found on the Internet. If you cannot find a file for a particular model, it is better to leave everything in stock mode, because other actions can harm the device.
Download Odin and install USB drivers for your phone.
Turn off the Galaxy Note 2 and put it into download mode. It turns on by simultaneously pressing 3 buttons: Volume Down + Home + Power. Then, to confirm the actions, press Volume Up and connect the device to the PC.
In Odin, click on the PDA button, where we select the required file with the extension tar.md5. Then check the boxes next to the Auto Reboot and F. Reset Time options. Make sure that no other functions are checked.
Click "Start" and wait for the installation to complete.

As you can see, flashing firmware via Odin is not the only advantage of this program. If you do everything wisely and according to the instructions, the application will be an excellent help for owners of Samsung devices.

First rule, flash only with a charged battery on the smartphone and uninterrupted power supply on the computer.
Second rule, do not pull out the USB cable while flashing Android firmware.
Third rule, The USB cable must be original and undamaged. Lately, it has been very important to use exactly the USB cord that came with the phone, since using non-original ones can break the device!
Fourth rule, the path to the firmware should not contain Russian-language folders ( C:folderwrong, C: or С:samsung - Right).

There are firmwares

Single-file— consist of one firmware file;

Two-Three-Four-Five-file(multi-file) - consist of more than one file (firmware from service centers);

Firmwares have extension * . tar or * . tar.md5

Preparing for firmware

Download the official Samsung firmware
Install the driver on your PC
Download and extract the ODIN program
Complete, original USB cord

Where to download Samsung Firmware

Or use a special utility that quickly downloads Samsung firmware to your computer - Samfirm instructions.

Firmware SER - Russia and CIS
Firmware SEK - Ukraine and CIS

Other regions - CSC

Albania:
A.L.B.

Algeria:
ALG
A.L.R.

Argentina:
ANC
ARO
CTI
UFN
PSN

Aruba:
ARU

Australia:
OPP
O.P.S.
VAU
XSA
TEL
HUT

Austria:
AOM
DRE
MAX
MOB
MOK
ONE
TRG
ATO

Baltika:
SEB

Belarus:
MTB
VEL

Belgium:
B.A.E.
B.S.E.
PRO
XEB
Bosnia-Herzegovina:
BHO
BHT
TEB

Brazil:
BTA
BTM
TMR
ZTA
ZVV
ZTO
ZTM

Bulgaria:
CMF
GBL
MTE
MTL
OMX
PLX
VVT

Canada:
R.G.S.
BMC
TLS

Chile:
CHB
CHE
CHL
CHT
China:
CUH
INT
TEC
TIY
CMC
CHN
M00

Colombia:
COB
COL
COM
COO

Cyprus:
C.Y.V.

Egypt:
EGY

Finland:
ELS
SAU
NEE

France:
OFR
AUC
BOG
COR
DIX
FTM
NRJ
ORC
ORF
SFR
UNI
VGF
XEF

Germany:
DBT
DTM
DUT
EPL
MAN
MBC
VD2
VIA
XEG

Greece:
AOC
COS
EUR
GER
TGR
VGR
C.Y.O.

Romania:
PAN
VDH
WST
TMO
XEH
TMH

India:
HFC
HYA
INA
IND
INU
IMS
REL
TAT
INS

Israel:
CEL
PCL
PTR

Italy:
GOM
HUI
ITV
OMN
TIM
VOM
WIN
XET
F.W.B.

Kazakhstan:
EST
KCL
KMB
KZK
SKZ

Korea:
SKT
KOR

Mongolia:
MPC

Netherlands:
BEN
MMO
ONL
QIC
TFT
TNL
VDF
VDP
XEN
KPN

New Zealand:
VNZ
TNZ
NZC

Norway:
TEN
NEE

Pakistan:
WDC
PAK

Poland:
ERA
IDE
PLS
PRT
XEO

Romania:
CNX
HAT
ORO
COA

Russia:
AZC
BLN
EMT
ERS
GEO
MTV
SER
SNT

Singapore:
BGD
XSO
XSP

Slovenia:
MOT
SIM

Slovakia:
GTL
IRD
TMS
ORS

South Africa:
XFA
XFC
XFM
XFV
XFE

Spain:
AMN
EUS
FOP
XEC
ATL

Sweden:
BAU
BCN
BME
BSG
BTH
COV
HTS
SEN
TET
TLA
XEE
VDS
TNO

Switzerland:
AUT
ORG
MOZ
SUN
SWC

Taiwan:
TWM
BRI
TCC
TCI
C.W.T.

Thailand:
CAT
THE
THL
THO
T.H.S.

Tanzania:
SOL

Tunisia:
ABS
RNG

Türkiye:
BAS
KVK
TUR
TLP
TRC

Ukraine:
KVR
SEK
UMC

SOUTH AFRICA:
M.I.D.
ARB
XSG
AFR
ITO

Great Britain:
BTC
O2I
O2U
ORA
TMU
T.S.C.
VOD
XEU
VIR
H3G
CPW

USA:
AWS
DOB
TMB
C.L.W.

Uzbekistan:
UZB

Vinizuela:
VMT

Vietnam:
XXV
PHU
XEV
DNA
FPT
SPT
TLC
VTC
VTL

[collapse]

After installing the drivers and downloading the firmware, you need to put Samsung into firmware mode (bootloader or download):

For flagship smartphones (S8, S9, S10)

To do this, turn off the device and perform the following steps:

For smartphones and tablets it looks like this:

Turn off smartphone/tablet and press the “Volume Down” + “Central button” + “On/Off” button

we get to this menu, release the buttons and press the “Volume Up” button

For older smartphones (before mid-2011):

If you can’t switch to Download mode

[collapse]

2. Connect Android to your PC and wait until the drivers are installed.

3. Launch Odin, a window should appear in the upper left corner indicating that the device is connected:

4. Add firmware files to the Odin program

Now let's move on to the firmware process, or more precisely how to configure everything correctly so that it works!

When updating the firmware, it is possible to lose programs and their data (but not melodies, pictures, etc.)

Firmware

Single-file Samsung firmware and multi-file firmware are flashed differently!

If the firmware is Single-file

We insert the firmware into AP or PDA field (press the button)

If the firmware is Multi-file

do not change anything and do not check the boxes in the left corner (unless required):

5. After selecting the firmware files, click the button START, and Android which will last from 2 to 5 minutes. After which a message will appear PASS or RESET, the firmware is installed and the smartphone will reboot (you can disconnect the Samsung from the PC).

This completes the firmware. Good luck with your sewing!

Samsung won't boot after flashing firmware?

Video Instructions for firmware
Samsung smartphone via ODIN

Errors that may occur during the firmware process

During the process of flashing Samsung smartphones and tablets, various errors may occur:

Can't see the device
The process is stuck
Failure during firmware update
Unexpected break
Error when starting device update

Firmware for kernels (boot.img, zImage), recovery files and modems

How to flash a modem?

If you are told to flash the modem, then this means that you need modem file paste into field Phone and flash it.

How to flash the kernel or Recovery?

If you are flashing a third-party kernel or Recovery and you have Android 5.X.X and higher preinstalled, then you need to make certain changes to the Android settings:

Flashing the kernel, kernel or CWM means that you need to insert the file into the AP or PDA field and flash it.

Possible problems when installing Recovery

If suddenly, after flashing a custom recovery, you see that the recovery remains standard, then these instructions will be useful to you:

In ODIN, uncheck AUTO REBOOT
Flash custom Recovery
Turn off Android device
(if Samsung just started to boot, then repeat procedure 1-4)
Apply patch (root rights)

How to create a TAR file with IMG
to Samsung smartphone

Read more articles and instructions in the section Articles and Android Hacks or Android firmware. Stay with the site Android +1, it will be even more interesting further!

We continue the topic of experimenting with my new phone. From the experience of using routers and other equipment, I have developed a strong habit - first of all, update their “brains”. The thing is that from the moment the device leaves the factory until it falls into your hands, more than one month may pass, and during this time its firmware could undergo significant changes and open up wider possibilities for use for the user. And today we will clearly check how to flash a Samsung phone on Android 4.4 and how safe is it to do it yourself?

Ways to flash a Samsung phone on Android 4.4

There are several ways to flash an Android phone. The first is directly from him through the system. My Samsung was running Android 4.4, and if you go to Settings > Phone Information > Software Update, you can configure it to automatically check for new firmware for your model. To do this, check the “Auto-update” box. I also recommend activating the “Wi-Fi Only” option; in this case, the presence of a new version will be checked only when the phone is connected to a wireless network, otherwise your mobile traffic will constantly be wasted through the cellular operator, which is fraught with loss of money.

The scan can be started manually by clicking on “Update”.

Flashing a Samsung phone on Android, like any other, can only be started with a 100% charged battery

However, this option for updating the Samsung Galaxy firmware is not entirely convenient and can fail in the middle, as happened to me. Therefore, I recommend performing this task using a special program installed on a computer and with a phone connected to it via a USB cable.

There are also variations here - you can do it using the official Samsung Kies program, or you can use the popular Odin or its equivalent. In the latter case, it is possible to use both official firmware for Samsung phones on Android, and from third-party developers, which are often more convenient and open up wider possibilities for the phone, but it will not be covered by the factory warranty. Therefore, it is recommended to install third-party firmware only after the warranty period has expired.

How to officially flash a Samsung phone on Android?

So, let's start figuring out how to flash Android using the Samsung update as an example, and turn to the Samsung Kies program, which can be downloaded here. By the way, it was created by analogy with Apple's iTunes and with its help you can completely synchronize your phone with your PC - contacts, files, music, etc.

Before you start updating the Samsung firmware to a new Android, it is recommended to make a backup copy using your phone or via Kies to avoid possible data loss

First we install the program. At the same time, drivers for all kinds of devices from this company will be added to the computer, including yours. We launch it, connect the phone to the computer via USB and wait until it is recognized.
Next, after a window opens with all the basic data about your phone, select “Firmware update” and if it is available, this will be reported in an additional window that opens.

Click the “Update” button, agree to the rules and confirm our desire. And we wait for the end.. Do not touch the phone during this time and under no circumstances disconnect it from the cable from the computer. By the way, I don’t recommend leaving for a long time either, since your antivirus or firewall may crash a couple of times, in which you will need to allow Kies to perform its functions. Also disable the antivirus on the mobile phone itself, otherwise it will not allow the system to update.

As a result, we get this and confirm the end of the software update.

Updating Android Firmware on Samsung Phone via Odin

Now let's turn to the “gray” firmware. I suggest you watch the step-by-step video first, and then we’ll continue.

First of all, you need to put the phone into download mode (“Downloading”), which is done by simultaneously pressing the key combination “Home”, “Power” and “Volume minus” (or “Volume plus” depending on the model). If done correctly, the Android logo and an inscription about boot mode will appear on the screen.

Next, download and install the Odin MultiDownloader program (you can easily find it on any thematic site or Google it in a search engine) - this is a professional program intended for service centers, so you don’t have to be scared, if you do everything correctly in it, then nothing bad will happen to your phone.

And you will also need the firmware files that you downloaded from the official website or any third-party firmware support forum. As a rule, there are four of them - PDA, the main firmware file; PHONE, which is responsible for working with the cellular operator’s network; CSC - phone settings; and PIT - service information storage. Make sure they are all included in the set. However, there are also single-file versions, in which case it will need to be imported in place of the main one - PDA.

If you are working on a computer with Windows 7 or higher installed, then this will be enough. If you have XP, then you will also have to install the Kies program that we have already disassembled, which will install drivers for your Android phone on Windows, or separately the drivers themselves - Samsung USB Driver for Mobile Phones. On the same site you can also select firewood specifically for your model and version of the computer OS.

Now you must first of all kill all Kies processes if you installed and launched it. To do this, press the key combination Ctrl+Alt+Del on your computer and look for processes that have the word “Kies” in their names. And we complete them. Then we launch Odin - our smartphone is already in download mode - connect it via a USB cable and press the “Volume Up” button (in relation to the Samsung Galaxy S2).

Now you can start updating the software.

In the Odin program, one (first) ID:COM section should be displayed in yellow (there are several of them for simultaneous work with several phones). In the program, check the boxes for “Re-Partition”, “Autoreboot” and “F.Reset Time”.

Now press the “Start” button and wait for the process to complete until the process graph reaches the end, lights up green and the word “Pass” appears.

After this, the phone will reboot and start working on the new software version. Additionally, you can use the *#1234# command to check the current version. You can also completely clear all data using the service code *2767*3855#.

This completes the firmware for a Samsung phone based on Android OS, thank you all for your attention!