Error 9006 in itunes when updating ios. Troubleshooting Iphone Recovery

There is no perfection in the world - so even excellent "apple" technology can also work incorrectly under certain circumstances. Our guide to the most common mistakes in iTunes that happen in the process on iPhone, iPad or iPod Touch - at your service!

In contact with

Network errors

Rooms: 17, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200

The following notifications may appear on the screen:

"While loading software An error has occurred".
"The device is not supported for the requested build".

What is the reason: Problems connecting the PC or Mac to the update server or the device itself.

What to do:

- . Instructions for Windows, instructions for Mac -.
- Temporarily disable or uninstall your antivirus software.

Conflict with antivirus

Rooms: Errors: 2, 4, 6, 9, 1611, 9006.

What does A: Antivirus software prevents iTunes from connecting to the update server or iPhone / iPad / iPod.

What to do:

- Check your antivirus and other security software settings. Make sure they don't interfere with iTunes. The easiest way to do this is to temporarily turn off and remove the software (some will have to be additionally removed through registry cleaners like CCleaner).

Problems with the computer's USB, cable, Lightning connector on the device

Rooms: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014.

Screen message: "invalid response".

What to do:

Make sure you're not having problems connecting via USB (try other USB ports and a different cable). Remove all third-party batteries and cases, use an Apple branded cable to connect to the PC through another USB port(but DO NOT connect through ports such as those on a keyboard or monitor), try connecting on another computer. Connect your iPhone or iPad to your PC via USB, then unplug the cable from your computer, plug it back in. Does not help? Disconnect the cable from your iOS device, and then connect your smartphone or tablet again. Turn off virtualization software (such as Parallels or VMware) if installed. Finally, sometimes a simple reboot helps - both the computer and the iOS device, as well as disconnecting all peripherals from the PC (printers, etc. You don’t need to turn off the mouse and keyboard). It might be worth checking to see if the latest version of iTunes is installed on your computer and updating it if necessary. If on iPhone screen or iPad you see the inscription Connect to iTunes, the device must be restarted and restored.

See the tips above for checking security software.

Hardware issues

Rooms: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 53, 56, 1002, 1004, 1011, 1012, 1014, 1667, 1669.

What to do:

— See tips above for checking security software;
- 2 times restore iPhone or iPad - with the condition that you do it with a 100% working cable, PC and Internet access;
- contact service center.

Software issues on the device

Number: 1015.

Screen message: "Unable to find the required resource."

What does: The software is outdated or modified.

Causes: iTunes is "ancient" / iPhone or iPad is in beta new firmware iOS / trying to install more early version iOS (for example, iOS 8 to a device with iOS 9) / unauthorized modification detected (firmware hacking).

What to do:

- Use the current IPSW firmware file (can be downloaded).

Have you recently received an "error 9006" alert while using iTunes and haven't been able to resolve the issue?

There can be many reasons for the error to occur: “There was a problem downloading the iPhone software. Happened Unknown error(9006)".

There are several ways to solve this problem. In this article, we will tell you about error 9006 on iPhone and provide step by step solutions Problems. Read on and find out how to overcome iTunes error 9006 in four different ways.

The error appears if you use old version iTunes or trying to update or restore the firmware of your iPhone using iTunes, you may receive error 9006. It will say something like “There was a problem downloading the iPhone software. An unknown error has occurred (9006)." This usually indicates a software update (or download) failure for the iPhone you are using.

In most cases, error 9006 in iTunes occurs when the application is unable to contact the Apple server. There may be a problem with your network connection or the Apple server may be busy. To complete the software update process, iTunes requires an appropriate IPSW file associated with your device. When it fails to download this file, it displays error 9006 in iTunes.

This can also happen if you are using an older version of iTunes that is no longer supported by your device. There could be several reasons for getting iPhone error 9006. Now that you know its cause, let's go ahead and find out how to resolve it.

How to fix error 9006 when updating in iTunes?

As already said, one of the main reasons for getting error 9006 is using an older version of iTunes. Most likely, the version of iTunes you are using no longer supports updates to your device, so you can try to resolve error 9006 by updating iTunes.

If you are using iTunes on a Mac, just go to top panel menu and choose iTunes > Check for Updates.

Windows users can go to Help > Check for Updates to check for the latest update related to iTunes. A pop-up message will appear about latest version iTunes. Just agree to it and follow the instructions on the screen to install it.

Fix error 9006 by restarting your device

If you are already using updated version iTunes, there is a possibility that there may be a problem with your device. It can be solved by simply restarting it. This can be done by clicking power button(wake/sleep). After the window pops up, click on "Shutdown". Wait a few seconds before turning on the device.

If your phone cannot turn off, you need to force restart it. If you are using iPhone 6 or older devices, you can reset it by pressing the Home and Power buttons at the same time (hold for about ten seconds). Keep pressing both buttons until the screen goes black. Release them as soon as you receive Apple logo on the screen.

iPhone 7, iPhone 7 Plus owners need to simultaneously hold down the "Power" and "Volume Down" buttons until the screen goes black.

For iPhone 8, iPhone 8 Plus, and iPhone X, quickly press volume up, then volume down, then hold the power button until the Apple logo appears.

How to bypass error 9006 using an IPSW file

Basically, we get error 9006 in iTunes whenever the system cannot load the IPSW file from Apple server. To fix this, you can manually upload the files. IPSW is original file iOS system update, which you can use to update your device with iTunes. To fix iPhone error 9006 with an IPSW file, run the following actions:

1. First, download the appropriate IPSW file for your device. Make sure you download desired file for your device model.

2. Secondly, now that your device is connected to the iOS system, launch iTunes and go to the "Summary" section.

3. Here you can see "Restore" and "Update" buttons. If you are using Mac then hold Option key(Alt) and command key by clicking the corresponding button. For Windows, this can be done by holding Shift key.

4. This will open the file browser, from which you can select the IPSW file you have recently uploaded. This will allow iTunes to update or restore your device without any issues.

Also read:

The video shows the steps in detail:

HOW TO FIX ITUNES ERROR 9006

How To Fix iTunes Error 9006 iPhone

How to Fix iTunes Error (9006) Easy Steps

How to fix error 9006 in iTunes without losing data?

One of better ways fix error 9006 is to use . It is an extremely effective and easy to use tool that can solve many other issues related to iOS devices such as: reboot loop, black screen, iTunes error 4013, error 14, etc. One of the best things about the app is that it can fix error 9006 without causing data loss on your device.

Part of the dr.fone toolkit is compatible with all leading iOS versions all major devices such as iPhone, iPad and iPod Touch. To use dr.fone – Repair, just follow these steps:

1. Download the app from the official website and install it on your Windows or Mac. On the welcome screen, select an option « Repair » .

When recovering iPhone iTunes sometimes gives an unknown error with a number, without fixing which it is impossible to continue working with mobile device. Depending on the number of the failure that failed to restore iPhone, there are different ways to resolve the problem.

Error classification

Service Apple support on special page The site divides failures by numbers into several categories. However, you will not find some codes. For example, there is no number 52 on the support page, because iTunes does not fail with such a code. Error 47 is also not listed, although some users complain that due to a failure with this number, they cannot restore their iPhone.

If you encounter problem 47, then there may be several reasons for its appearance:

1. Failure of the microcircuit of the modem part.
2. Failure of the modem processor.
3. Liquid ingress into the modem part.

As you can see, error 47 is related to a hardware problem. Therefore, if you encounter failure 47 when restoring your iPhone, take your mobile device to a service center. Even the master does not immediately determine the exact cause problem number 47 appears, so it's best not to risk trying to repair it yourself.

Communication errors (1671, 3004, 3014, 3194)

If during recovery iPhone iTunes displays a message with the numbers 1671, 3004, 3014, 3194, or 9006, then you are dealing with problems that prevent your computer from connecting to an Apple server or mobile device. In the case of problems 3004, 3014 3194, 9006, the first thing to try is restarting the computer. If this does not help, close the applications that are running in background, leaving only iTunes. Disable your firewall and antivirus. Since failures with numbers 3004, 3014 3194, 9006 occur due to the inability to establish a connection with the server, disabling the firewall will help remove the firewall.

If these methods do not help to get rid of failures 3004, 3014 3194, 9006, then try the following methods:

The extra entry will end with gs.apple.com. If you find one, delete it immediately and save host file. After edit hosts crash messages 3004, 3014 3194, 9006 should no longer appear when restoring an iPhone. If problems with numbers 3004, 3014 3194, 9006 appear when restoring iPhone to Mac computer, then open hosts through the terminal using the command "sudo nano /private/etc/hosts".

If iTunes gives an error 3194 when the recovery line is 2/3 filled, then with a high degree of probability you are experiencing a hardware problem - damage to the modem or iPhone's power module.

If you cannot restore your device due to a problem with the modem, please contact the service center for help, as you will not be able to fix the problem yourself.

Errors 14 and 4005

iPhone restore failures 14 and 4005 usually occur when there are problems with connecting the device via USB. Error 14 indicates that during the recovery process, iTunes detected a violation of the integrity of the firmware file. Fault 4005 usually indicates that there is some kind of cable or port problem on the computer.

To fix error 14 or 4005:

• Use the original iPhone cable.
• Connect the device to a different port. Try to use the connectors that are on the rear panel system block, then you will give less chance of errors like 14 and 4005.
• Connect iPhone to another computer.

If error 14 or 4005 persists, try putting your phone in DFU mode before restoring. If that doesn't fix crash 14 or 4005, download the firmware manually and select the desired ipsw file by holding down the Shift key while pressing the "Repair" button.

Errors numbered 14 and 4005 appear when trying to update the firmware by jumping through the version (for example, from iOS 7 directly to iOS 9). To avoid trouble 14 or 4005, select suitable version firmware.

Error 21

Failure number 21 occurs when the device is incorrectly entered into DFU mode. To eliminate the cause of error 21, use programs like redsn0w to transfer the phone to DFU.

Especially often, owners of iPhones, on which the jailbreak procedure was carried out, encounter failure 21. In addition, failure 21 may occur due to the fact that the battery is not fully charged. Accordingly, in order to fix the problem with number 21, you need to put the smartphone on charge.

Over the past few years, Apple has released all sorts of updates for its own devices. However, to take full advantage free versions software by installing them on own iPhone- it's not too much simple task. Mobile devices, in most cases, during the update, can inform the user about the problem that has arisen, and then it will become much more difficult to deal with the disaster than before. Naturally, failures of various kinds that occurred during the restoration or updating of the device are a serious nuisance, however, no one is immune from them.

This article will talk about Error 9006, which pops up in iTunes in the process of updating the device - iPhone (iPhone). Often this problem in iTunes appears if the developers third party applications provided not too much for use quality content. Perhaps even updates from the developers had flaws, due to which a significant problem arose during the update.

Symptoms of an iTunes Error 9006

The very first signs by which you can make sure that error 9006 is present will be a problem with running the iTunes utility on your computer. There may also be a problem with the input official store applications - App Store (iTunes Store). Some people also complain that they couldn't even create backups, perform the synchronization process and perform many of the manipulations they need related to the device - iPhone.

The first way to fix the problem

In particular, an ordinary correct update can help fix problems that appeared on the iPhone (including fixing error 9006). However, in order to correctly perform all the actions, you must follow the tips below:

• Put on the computer correct date, as well as the current time;
• Find out if there are administrator rights on the computer while updating the device;
• to the most current version for today;
• Update Windows components;
• Update the software responsible for security;
• If there is a need, reconfigure this software (antivirus);
• On certain time switch off antivirus program and repeat the update process;

Error 9006 may also appear due to the fact that a special entry is added to the registry, which is called TcpWindowSIze. It is she who changes the packet size in operating system and this serves as a conflict, due to which error 9006 occurs in iTunes.

The second way to fix the problem

If the actions performed did not give a result and it was not possible to cope with the problem, then you must perform the following steps:

• Check if the connected network has access to ports such as: 80 and 443;
• Make sure that access to update resources has not been blocked Windows Defender or any other security utilities;
• Delete the .ispw file and try updating again;
• Run the update process using another computer (laptop).

Did you receive an "error 9006" prompt when using iTunes and can't seem to resolve the issue?

Don't worry! You have come to the right place. There can be many reasons for getting the error message “There was a problem downloading the iPhone software. An unknown error has occurred (9006).". Fortunately, there are several ways to solve this too. In this informative post, we will make you familiar with the iPhone error 9006 and provide step-by-step solutions to fix the problem as well. Read on and find out how to overcome iTunes error 9006 in four different ways.

Part 1: What is iTunes Error 9006 or iPhone Error 9006?

If you are using an older version of iTunes or are trying to update or restore an iPhone from iTunes then you will get error message 9006. It would state something like “There was a problem downloading the software for the iPhone. An unknown error has occurred (9006)." This usually depicts a software update (or download) failure for the connected iPhone.

In most cases, iTunes error 9006 occurs when iTunes is unable to communicate with the Apple server. There might be a problem with network connection or Apple's server can be busy as well. To complete the software update process, iTunes requires an appropriate IPSW file associated with the device. When it fails to download this file, it displays iTunes error 9006.

This can also happen if you are using the old iTunes version not supported by your device anymore. There could be several reasons for getting iPhone error 9006. Now that you know its cause, let's go ahead and find out how to solve it.

Part 2: How to Fix iTunes Error 9006 with No Data Loss?

One of the best ways to fix error 9006 is to use dr.fone - Repair. It is an extremely effective and easy to use tool that can solve many other issues related to iOS devices such as reboot loop, black screen, iTunes error 4013, error 14, and more. One of the best things about the app is that it can fix iPhone error 9006 without causing data loss on the device.

Part of the dr.fone toolkit, it is compatible with any major firmware version and all major devices such as iPhone, iPad and iPod Touch. To use dr.fone - Repair, just follow these steps:

1. Download the application from the official website and install it on Windows or Mac. On the welcome screen, select the "Repair" option.

2. Now connect your iPhone to the system and wait for it to recognize it. Once this is done, click on the "Start" button.

3. In addition, you must make sure that your phone is in DFU mode(Device Firmware Update). This can be done by simply following the instructions on the screen.

4. To make sure the app can fix iTunes error 9006, provide the correct details regarding your device model, software updates, etc. Click on the "Download" button to get the new firmware update.

5. It may take some time for the app to download the update. You will know about it from the indicator on the screen.

6. Once this is done, the tool will automatically start repairing the device. Sit back and relax as it would fix iTunes error 9006.

7. Eventually, your device will restart in normal mode. If you are not satisfied with the results, simply click on the "Try Again" button to repeat the process.

Part 3: Fix iTunes Error 9006 while updating iTunes

As noted, one of the main reasons for getting error 9006 is using an older version of iTunes. Chances are that the version of iTunes you are using cannot be supported anymore to update your device. So, you can just try to solve iTunes error 9006 by updating it.

If you are using iTunes on Mac then just go to top line menu and select iTunes > Check for updates options. Windows users, can go to Help > Check for Updates for the same feature. This will check for Latest updates associated with iTunes.

A popup message will be regarding the latest version of iTunes available. Just agree with it and follow the on-screen instructions to install it.

Part 4: Fix error 9006 after device reboot

If you are already using an updated version of iTunes, then chances are that there may be a problem with your device. Luckily, it can be fixed with a simple restart. This can be done by pressing the power button (wake/sleep). After power control, just slide the screen to turn off the device. Wait a few seconds before it restarts.

In case your phone is unable to turn off, then you need to force restart it. If you are using an iPhone 6 or older generation device, then it can be restarted by pressing the Home and Power buttons at the same time (for about ten seconds). Keep pressing both buttons until the screen turns off. Release them as soon as you get the logo Apple on the screen.

The same exercise can be followed for iPhone 7 and iPhone 7 Plus. The only difference is that instead of home buttons and power, you need to press the power and volume down button at the same time and wait until the screen goes dark.

Part 5: Bypass iPhone error 9006 using IPSW file

Mostly, we get iTunes error 9006 when the system cannot download the IPSW file from the Apple server. To fix this, you can manually upload the files. IPSW is a raw update file iOS systems which can be used to update your device using iTunes. To fix iPhone error 9006 with an IPSW file, follow these steps.

1. First, download the appropriate IPSW file for your device from . Make sure you are downloading correct file for your device model.

2. Now, after connecting your iOS device to the system, launch iTunes and visit its summary section.

3. Here you can see the "Restore" "Update" buttons. If you are using a Mac, then hold down the Option (Alt) and control keys while clicking on the appropriate button. For Windows, the same can be done by holding down the Shift key and clicking on one of the buttons.

4. A file browser will open in which you can select the IPSW file you have recently uploaded. This will allow iTunes updates or restore your device without any problems.

After following these steps, you should be able to easily fix error 9006 on your device. Go ahead and follow the above mentioned steps to fix iPhone error 9006. Though if you want to resolve iTunes error 9006 without data loss, then just give dr.fone iOS System Recovery try. This will fix all major problems on your iOS device without erasing data.