Error 3503 when restoring iPhone 5s solution. Why did this happen? Effective treatment method

Quality product! Super smooth and reliable! Your iPhone. Since its launch in June 2007, every new iPhone has brought positive influence on brand quality. iPhone proves that nothing is perfect and your precious device can be killed by iTunes error 3014 (unknown error 3014/3194/4013/14/3004).

Apple tends to update iOS frequently. Within a few weeks, sometimes days, a new one comes out iOS update. But, when you have already started updating your iPhone, something went wrong and error 3014 occurs. When your computer tries to connect to Apple servers, and an error occurs.

Why did this happen?

Error 3014 in iTunes usually occurs when a restore or update goes wrong. Most often this happens during an update. To put it bluntly, “DO NOT panic.” This annoying error 3014 can be easily removed. Here are seven solutions you can try.

How to fix error 3014 in iTunes?

Solution 1: Correct the "hosts" file

This is a little difficult for a non-experienced user, but we will introduce step by step instructions. If you haven't done something like this before, be sure to make a restore point on your system.

Step 1 Open Notepad. Then “Create and open a file” and go to the path “C:\Windows\System32\drivers\etc”. (You can just paste this path).

Find the "hosts" file.

You should see a “hosts” file, but there are two of them, which one should you open? You need to open the first file using notepad.

Right click on the required file, and select open with, then select notepad.

When it opens it should look something like this:

Don't change anything

Step 2 You need to add a line to the end of the "hosts" file.

74.208.10.249 gs.apple.com

Save the HOSTS file and then try this: Open your browser and go to If you did this step correctly, it will take you to the Cydia site.

Step 3(Only do this step if your site is not showing up. Otherwise, go back to step 2)

Find the following lines in your HOSTS file and remove them:

74.208.10.249 gs.apple.com

127.0.0.1 gs.apple.com

Once you are done removing these lines, save your hosts file, open your browser and go to the page. It should redirect you to the Apple website.

After you complete these simple steps, open iTunes and continue the recovery process, it should finish without error 3014.

Solution 2: Update iTunes

It's very simple. If you are not sure, just check the iTunes version, which will let you know that you have the latest version of iTunes installed on your computer. This is pretty obvious, but it's best to make sure you have everything up to date.

You may have seen this happen with other software. From the Help menu you can request "updates" to check.

Solution 3: Check your PC settings

Remember, this is the connection between your computer and Apple servers? It may seem stupid, but the reason why error 3014 occurs may be that your computer and Apple are unable to establish connections due to timing. Make sure the date, time, and time zone are correct.

Synchronize time!

Hope the picture helps!

Solution 4: Update your OS

No matter what operating system you have: a Windows PC or an Apple Mac, you should make sure that you have the latest updates.

Solution 5: Check your security software

Many articles have written about the antivirus problem. It blocks the connection in iTunes.

We don't know what antivirus/firewall you have. The example below is for Windows built-in firewall. The firewall stops all third-party connections. This may be the reason why communication with Apple is broken.

Make sure you have the latest version of your antivirus installed software.

Update your antivirus

If you have the latest version of the antivirus installed (or you don’t have one), then disable both the antivirus and the Windows browser.

Windows System and Security.

Don't forget to turn it back on!

Solution 6: Are you connected to the Internet?

This can happen if you are connected to a shared Wi-Fi. You must ensure that your internet connection is stable. Obviously, this is an important factor for good communication with Apple servers. Make sure nothing else is running so that iTunes can make full use of your network.

Sometimes when restoring an iPad, users encounter an unknown error that prevents them from completing the procedure correctly. The following numbers may appear in the failure message: 1, 3194, 3004, 4005, 4014, 4013. Knowing the number, you can quickly diagnose the cause of the problem and find ways to fix it. Below are the most common errors that occur when restoring an iPad and how to resolve them.

Error 3194

Failure number 3194 is one of the most common errors when restoring an iPad and iPhone, the appearance of which is due to the fact that the device does not receive a response from the Apple server. The causes of failure 3194 can be divided into two categories:

So that you understand how to diagnose the cause, let's look at the procedure for restoring the iPad.

1. iTunes downloads the firmware file.
2. The downloaded file is unpacked.
3. The device is put into Recovery Mode, preparing for recovery.
4. It starts checking for updates and signing the firmware with an individual SHSH hash for each device.
5. The recovery process starts.

If problem 3194 occurs during the first four stages of recovery, then it is software in nature and can be fairly easily fixed. If error message 3194 appears in the final phase, then the specific cause must be looked for in the hardware of the device. Usually this is a modem failure or a power problem.

If the iPad was in recovery mode when the crash message appeared, you can return to normal state you will have to use the TinyUmbrella utility.

After exiting the device from Recovery Mode, you can begin to eliminate the error that prevented you from performing iPad recovery.

Troubleshooting Crash 3194

If you discover that the failure is hardware in nature, then do not try to fix the error yourself. Contact the service center so that specialists can diagnose the exact cause. If problem 3194 is software in nature, then you can fix it yourself.

Make sure you have the latest version of iTunes installed on your computer. Uninstall the program and download the latest version from the official Apple website.

The next step is verification hosts file. As a result of certain actions (for example, running the TinyUmbrella utility on the computer), entries are made in the hosts file that block sending requests to Apple servers.

Save the changes to the hosts file and be sure to restart your computer for the configuration to take effect. If an unknown error occurs when you try to restore your iPad to Mac computer, then do the following:

1. Launch Finder. Select Programs – Utilities.
2. Open Terminal. Run the command “sudo nano /private/etc/hosts”.
3. Enter the password that is used when logging in.

In the Terminal window you will see the contents of the hosts file. Using the arrow keys on your keyboard, navigate down to the entry that contains the address "gs.apple.com". Add an ignore sign “#” and a space before the entry. Don't forget to save the file and restart your computer.

If after editing the hosts file you still cannot restore your iPad, check your antivirus and firewall.

If iTunes and Bonjour are not in the list, click "Allow another application" and specify the path to the programs' executable files. If this does not help, disable the computer’s protection during recovery or exclude the router by connecting the Internet cable directly to the computer’s network card.

Error 3004

The unknown error 3004 that appears when restoring an iPad via iTunes has the same roots as failure 3194. The cause of the problem lies in the operation of the antivirus and firewall that blocks access to Apple servers. To fix error 3004, try the following:

To make IE the default browser, right-click its shortcut and open properties. Go to the "Programs" tab and click "Default".

If this does not help resolve issue 3004, then try additionally disabling Windows firewall. Other reasons for error 3004 include:

• Using unlicensed software (for example, a pirated build of Windows).
• Infecting your computer with viruses.

To rule out these factors, try restoring your iPad on another computer that has been previously scanned by an antivirus.

Errors 4005, 4014,4013

Error messages with numbers 4005, 4014, 4013 appear in two cases:

• The connection between iPad and computer is interrupted.
• iTunes can't start recovery.

In addition to numbers 4005, 4014, 4013, error message 9 may be displayed. All these problems have the same causes:

• The iPad loses connection with the computer due to incorrect operation of the USB port or cable.
• iTunes is damaged and not all necessary components are installed.
• The computer is infected with viruses.

Knowing the reasons for the occurrence of failures 4005, 4014, 4013, it is not difficult to figure out what measures should be taken to resolve the problem. The first step is to check your computer for viruses. Use both the installed antivirus and portable utilities Dr.Web CureIt! and Kaspersky Virus Removal Tool.

Make sure the cable is not damaged and the USB port on your computer is working. Connect another device to this port to make sure there are no problems with the connector. Check the cable: there should be no kinks or breaks on it. Use original Apple accessories to prevent errors due to incompatibility.

In some cases, to resolve errors 4005, 4014, 4013, you need to completely remove iTunes from your computer and then reinstall the application to work with Apple equipment. For complete removal applications and clear the registry of iTunes-related entries, use the Uninstall Tool or another powerful uninstaller. To troubleshoot 4014.4013, in addition to iTunes, you need to remove other components related to recognition and operation from your computer Apple devices. The current version of iTunes should be downloaded from the official Apple website to avoid the possibility of downloading an incomplete or damaged package.

Another way to fix failures with numbers 4005, 4014, 4013 is to install operating system updates. This doesn't always help, but it's better to keep the system up to date, so try it, unless, of course, you have a pirated build.

To resolve issue 4005, 4014, 4013, Apple Support also advises that you force restart your iPad. To perform a forced reboot, hold down the Sleep/Wake and Home buttons for 10 seconds. Release the buttons when the Apple logo appears on the screen. After booting your device, try restoring it again. Errors 4005, 4014, 4013 should no longer prevent the operation from completing.

Report content

Copyright infringement Spam Incorrect content Broken links

Send

Almost every user iTunes I encountered that the program refused to perform any action and showed a pop-up window with the number of the error that had occurred...

What do these iTunes errors mean and how to solve the problems that arise - more on that below...

Reason for error 1: The iTunes version is too old or the firmware does not match the device.

Solution to error 1: Update iTunes to the latest version, download the firmware again (make sure you download the software version for the desired device).

Reason for error 2: The downloaded firmware is not packaged correctly.

Solution to error 2: Most likely, you are trying to install custom firmware (not the original build). Just download the original firmware, or use third party software for installing custom firmware.

Reason for error 3: This error user can observe upon completion iPhone firmware, iPad, which may indicate a faulty modem inside the device.

Solution to error 3: In fact, the error is similar to error -1, and if the latter is corrected by the recovery mode, then error No. 3 can only be resolved in a service center by replacing the modem.

Reason for error 5: The firmware is not installed in the mode for which it was intended. (DFU Mode/Recovery Mode).

Solution to error 5:

Reason for error 6: Error installing the firmware due to a damaged Boot/Recovery logo (occurs when installing custom firmware). Solution to error 6: Download the original firmware, or try installing it in different modes(DFU Mode/Recovery Mode).

Reason for error 8: iTunes cannot install the firmware because it is not suitable for this device (for example, installing firmware from an iPod Touch on an iPhone).

Solution to error 8: Download the original firmware for your device model.

Reason for error 9: Kernel Panic. Critical kernel error. Analogue blue Windows screen. This may occur if data transmission via the cable is interrupted during installation. Or when using poorly assembled custom firmware.

Solution to error 9: Check the USB port and connector on your iPhone/iPad/iPod Touch.

Reason for error 10: LLB (Low Level Bootloader) was not detected in the firmware, installation is impossible.

Solution to error 10: Rebuild the custom firmware or use the original one.

Reason for error 11: Some files were not found in the firmware.

Solution to error 11: Rebuild the custom firmware or use the original one.

Reason for error 13: The cable or USB port is damaged. Or you are trying to install the beta version of iOS from Windows.

Solution to error 13: Change USB and cable. Disabling USB 2.0 in the BIOS may also help.

Reason for error 14: The firmware file is corrupted. Either there is a problem with the cable or USB port.

Solution to error 14: Disable your antivirus. Change USB and cable. Try the original firmware.

Reason for error 17: An attempt to update non-original firmware (custom).

Solution to error 17: In this case, you need to restore the device from DFU or Recovery Mode.

Reason for error 20: The device is in Recovery Mode.

Solution to error 20: In this case, you must enter DFU Mode.

Reason for error 26: Errors when assembling the firmware.

Solution to error 26: Upload another firmware.

Reason for error 27 and 29: An iTunes error that occurs in older versions of the program.

Solution to errors 27 and 29: Update iTunes to the latest version.

Reason for error 28: Malfunction of the 30-pin/Lightning cable or connector in the device.

Solution to error 28: Repair at a service center or replacement of the 30-pin/Lightning cable.

Reason for error 34: There is not enough space to install the software (on your hard drive).

Solution to error 34: Free up some space to install the software (on the drive where iTunes is installed).

Reason for error 35: Incorrect folder permissions (the problem occurs on Mac OS).

Solution to error 35: In terminal.app enter:
sudo chmod -R 700 /Users//Music/iTunes/iTunes Media
, where is the username.

Reason for error 39: An error occurs when syncing photos.

Solution to error 39: Several of your photos are causing this error, you need to find them using the exclusion from synchronization method.

Reason for error 40, 306, 10054: Problems connecting to the server.

Solution to error 40, 306, 10054: It is necessary to disable anti-virus software, proxies, and clear the browser cache.

Reason for error 54: Occurs when transferring purchases from your device to iTunes.

Solution to error 54: There are a number of things you can try:

• iTunes > Store > Authorize This Computer
• Delete C:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes\SC Info
• Exclude music from synchronization by deleting the folder (then you can return the folder to its place)

Reason for error 414: Content is intended for persons over 17 years of age.

Solution to error 414: Agree to these rules or change your date of birth in your account settings.

Reason for error 1004: Temporary Apple server problems.

Solution to error 1004: Flash later.

Reason for error 1008: Apple ID has invalid characters.

Solution to error 1008: To prevent this error from occurring, you must only use your Apple ID letters and numbers.

Reason for error 1011, 1012: Problem iPhone modem/iPad.

Solution to error 1011, 1012: Hardware problem, requires repair.

Reason for error 1013, 1014, 1015: When checking the firmware after updating, a mismatch error occurred.

Solution to error 1013, 1014, 1015: You need to download the TinyUmbrella utility. In it, use the Kick Device Out of Recovery function.

Reason for error 1050: Apple activation servers are temporarily unavailable.

Solution to error 1050: Activate the device after some time.

Reason for error 1394: The device's operating system files are corrupted.

Solution to error 1394: Restore the device or try to jailbreak again if the error appeared after it.

Reason for error 14**: Cable transmission error.

Solution to error 14**: Either the firmware file is broken (you need to download another one), or the usb cable is broken.

Reason for error 1600, 1611: An error occurs when installing custom firmware via DFU mode.

Solution to error 1600, 1611: Try installing via Recovery Mode.

Reason for error 1609:

Solution to error 1609:

Reason for error 1619: iTunes is too old for your device.

Solution to error 1619: Update iTunes to the latest version.

Reason for error 1644: The firmware file is accessed third party programs.

Solution to error 1644: Restart your computer, turn off antiviruses if you are not working with the firmware file yourself.

Cause of error 2001: The error occurs on Mac OS. Driver problem.

Solution for error 2001: Update Mac OS.

Cause of error 2002: Third-party processes work with iTunes, thereby blocking access.

Solution for error 2002: If it is not an antivirus, then restart your computer.

Cause of error 2003: Problems with USB port.

Solution for error 2003: Use a different USB port.

Cause of error 2005: Problems with the data cable.

Solution for error 2005: Use a different data cable.

Cause of error 2502 and 2503: Installer errors due to limited access to temporary files. Found on Windows 8.

Solution to errors 2502 and 2503: The problem is solved by adding full access to the user to the C:\Windows\Temp folder. This is done as follows:

• right-click on the folder C:\Windows\Temp;
• follow the path “Properties – Security – Change” and select your user;
• Check the box next to “Full access”, then you need to save the changes.

Reason for error 3000, 3004, 3999: Error accessing Apple server.

Solution to error 3000, 3004, 3999: Access is blocked by some program. For example, antivirus. Disable them, reboot.

Reason for error 3001, 5103, -42110: iTunes can't load the video due to hashing errors.

Solution to error 3001, 5103, -42110: Update iTunes
Delete the SC Info folder:

• Win7 – C:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes
• Vista – C:\Program Data\Apple Computer\iTunes
• Mac OS – /users/Shared/SC Info

Reason for error 3002, 3194: There are no hashes stored on the server. (Apple or Saurika).

Solution to error 3002, 3194: Update to a stable firmware version. Remove the line: 74.208.105.171 gs.apple.com from the hosts file in:

• Win – C:\Windows\System32\drivers\etc\hosts
• Mac OS – /etc/hosts

Turn off antiviruses, try restoring via shift. An error may also occur when trying to rollback to previous version iOS. Recently, downgrading is not possible, calmly update to the latest version of iOS. A complex error, the explanations for which were highlighted in a separate article -.

Reason for error 3123: Problems authorizing your computer in iTunes.

Reason for error 3195: Error getting SHSH.

Solution to error 3195: Try updating the firmware again.

Reason for error 5002: Payment refusal.

Solution to error 5002: Look for errors in the completed bank card information.

Reason for error 8008, -50, -5000, -42023: The firmware download session has expired.

Solution to error 8008, -50, -5000, -42023: Delete the Downloads folder from your iTunes Media folder.

Cause of error 8248: The problem occurs if plugins for iTunes are installed that are incompatible with new versions of the program.

Solution to error 8248: Remove iTunes plugins. It often happens that the problem is in the Memonitor.exe process, close it.

Cause of error 9006: Something is blocking the firmware download.

Solution to error 9006: Download the firmware from another location, or solve the problem with antivirus software.

Cause of error 9807: Something is blocking the verification of signatures and certificates.

Solution to error 9807: Solve the problem with antiviruses.

Reason for error 11222: Access blocked.

Solution to error 11222: Disable your firewall and antivirus.

Reason for error 13014, 13136, 13213: Something is interfering with iTunes.

Solution to error 13014, 13136, 13213: Update iTunes, restart your computer, turn off your antivirus software. The problem should go away.

Reason for error 13001: The media library file is corrupted.

Solution to error 13001: Delete your iTunes library files.

Reason for error 20000: The error may occur when using a non-standard Windows theme.

Solution to error 20000: Install the default Windows theme.

Reason for error -39: iTunes can't download music from iTunes Store.

Solution to error -39:

Reason for error -50: There were problems connecting to the itunes.apple.com server.

Solution to error -50: Update iTunes. Relog your account. Turn off your antivirus software.

Reason for error -3259: The connection timeout has been exceeded.

Solution to error -3259: Update iTunes. Check your internet connection. Delete unfinished downloads, logging out/signing into your iTunes account may help. If that doesn't help, try restarting your computer.

Reason for error -9800, -9812, -9815, -9814: The time and date in the system are not set correctly.

Solution to error -9800, -9812, -9815, -9814: Set the correct date and time in the system settings.

Reason for error 0xE8000022: iOS files are damaged.

Solution to error 0xE8000022: Restore the firmware.

Reason for error 0xE8000001, 0xE8000050:

Solution to error 0xE8000001, 0xE8000050: Reinstall the AppSync tweak from Cydia.

Reason for error 0xE8008001: The problem occurs when installing applications on a jailbroken device.

Solution to error 0xE8008001: Install the AppSync tweak from Cydia.

Reason for error 0xE8000013: Synchronization error.

Solution to error 0xE8000013: Resync your device.

Reason for error 0xE8000065: Error in the operating system.

Solution to error 0xE8000065: Restart your computer, use a different USB port. If it doesn’t help, then the problem is in iTunes and you will need to restore the firmware.

If you have not found an answer to your question or something has not worked out for you, and there is no suitable solution in the comments below, ask a question through our

Error 3503 iTunes began to appear on Apple mobile devices from the end of September 2017. A similar problem manifests itself when you try to update this application - the device goes into the “Recovery mode” state, the message “error 3503 iphone” or its equivalent appears on the screen, and does not respond to the owner’s actions.

Naturally, it’s unpleasant when a person who bought himself a smartphone or tablet for a fairly significant amount of money cannot use the planned capabilities and all the rich functionality of such equipment. Therefore, it is necessary to understand - iTunes error 3503: how to fix?

What is needed to correct the situation

Some people who experienced an unknown error 3503 on their mobile device immediately rushed to write to technical support.

The answer discouraged them, since it represented a certain form of official reply:

1. Try moving your SIM card to a different model.
2. Try connecting to a PC, if that doesn't work, find a second computer and try it on it.

That is, real instructions no solution was provided to resolve this problem, and the development company offered to wait for an indefinite period of time while its specialists dealt with the situation.

Naturally, most users of such technology are clearly not satisfied with this answer. Fortunately, a solution exists in a situation where the iPhone could not be restored - error 3503.

To do this you will need: a problematic gadget, a personal computer and access to the Internet.

Effective treatment method

So, what to do when an error occurs when restoring iPhone 3503? The first option involves performing the following manipulations:

1. Go to the Network, search, download and install the special 3uTools application.
2. After completing the installation process, the program must be updated by clicking on the “Check Update” button.
3. On mobile device Press and hold the power and home buttons at the same time.
4. Wait for the company logo to appear and release the power button.
5. As soon as the picture on the screen changes, remove your finger from the second button.
6. Steps 3,4 and 5 should be carried out with the 3uTools program already running and connected to a PC.
7. Using a wedge on the “Flash” button, start downloading and installation problematic application through this software.
8. Wait for the started process to complete. Then follow the recommendations from the updated mobile technology.

As an alternative, you can use several more similar tools, which also involve the active use of a PC and switching the mobile phone to DFU mode, as was described in previous instructions:

• Recover iPhone (Error 3503) using iMyFone iOS

Naturally, this software should initially be found, downloaded and installed. After running the tool:

1. Go to standard mode, accessible from the main screen.
2. Transfer the problematic equipment to DFU using the method described above.
3. Start installing the new firmware - the program will automatically detect the connected mobile phone or tablet.
4. After completing the installation procedure, click on “Start correction”.

A few minutes will pass and the message about this error should disappear from the screen.

1. Corrections using iTunes funds
2. Once again, switch the connected iPhone to the computer into DFU mode.
3. Activate the launch of the iTunes application on PC.
4. The program will analyze all connections and detect the connected gadget. Select it.
5. Go to “Summary” and click on “Restore”.

After an automatic restart of the mobile equipment, the conflict situation should be eliminated.

Some other possible solutions you can try are:

1. Make sure your Internet connection is reliable.
2. Perform iTunes updates until the most current version.
3. Try to install the problematic update after disabling the “Find My iPad / iPhone” option.

The last treatment option can be implemented by going to the settings menu, where you must first go to “iCloud”, and then move the permission slider to the inactive state for the required function. After confirming this action, you can try to start the previously interrupted procedure again.

windowserror.ru

error 3503

This is my second video on how to solve the iphone Error 3503 this is the real fix for it, Just keep reading the comments you can share your ideas as well!

Iphone SE Error 3503 What should I do to make it work? The solution is here - https://youtu.be/Y586xggzrs4.

Apple community link for issue Discussions: https://discussions.apple.com/thread/7768437?start=0&tstart=0 Get "IPSW" from Here: https://ipsw.me/# Get ...

Error 3503, iPhone firmware, iPhone recovery, itunes error 3503, 3503 error.

This is a simple and tested fix for the new iTunes error while restoring or updating in windows, It is solved in Mac, but windows not!

how to solve C 3501 3502 3503 3504 3505 3506 in konica minolta 6500 6501 6000 7000 how to solve C 3501 3502 3503 3504 3505 3506 3507 errors in ...

unlock icloud, icloud, remover icloud, unlock service, iphone icloud unlock, icloud lock, removal unlock icloud, iphone 6 icloud unlock tool, icloud bypass, bypass ...

How to Fix iTunes Error 3503 IOS 11 and Restore Step-1: Turn Off "Find My IPhone" Step-2: Install "3uTools" and Update to 2.16 or newer Version. Download...

This video is to tell how to fix iTunes error 3503.

How to Fix iTunes Error 3503 & Error 9 IOS 11 2K17 How to Fix iTunes Error 3503 IOS 11 and Restore Step-1: Turn Off "Find My IPhone" Step-2: Install...

kesin çözüm test edilmiştir...

Download tool IPHONE (gratis tanpa password) IPHONE tool: https://goo.gl/AQ75qV ikuti panduan video cara mendownload semua file di atas ...

How to Resolve iOS update and restore errors in iTunes This is a simple and tested fix for the new iTunes error while restoring or updating in windows, It is solved ...

fix error 6 iphone iOS 11, How to restore iphone iOS 10.3.3, fix error 6 iphone ios 11, fix error 12, 24, 3503 and all error on iphone when you update faill ios ...

Descargar gratis Tunescare ➣ https://goo.gl/7FO51X Cómo solucionar cualquier error de iTunes al restaurar con Tunescare para Windows . Crea...

https://www.facebook.com/kimyi.Service.

How to fix iTunes unkown error 9/2001 on restore How to fix iTunes unkown error 9/2001 on restore error2001.

See the slides to check the steps to fix iphone could not be restored error 3503 by dialing iPhone technical support phone number +1 866-964-8169 to iPhone ...

Konica Minolta BizHub 6500.

Konica-Minolta bizhub 350, Develop ineo 250 reset fuser error code C3452.. Error code C3452 this problem is Fusing Warm-Up Failure.

This video shows you how to use a freeware TunesCare to fix iTunes restore error code 3014/3104/3504. Once finished, you can continue to restore iOS with ...

iTunes error 3194 fix for Window 10 and MAC computer There are two ways to fix iTunes error 3194, one is by editing Host file in your computer. You need to go...

bizhub, PRESS, c6500how to clear error c2454 very easy steps.

Best Way to Fix iTunes Error 3194 for iOS 11 and iOS 10 iPhone/iPad/iPod Hindi urdu Tutorials keyword fix 3194 error to downgrade iphone, fix 3194 error while ...

Had to reset a Iphone 8 plus, it was producing error code 9 i was using known good lightning cables, tried multiple USB ports (2 & 3) also tried on another ...

Dear friends a warm welcome to my Chanel here i am describing about how to solve c 2801 2802 2803 2804 error in konica minolta c 6500 6501 5500 6000 ...

is video main appko iphone x , iphone 8 ,iphone 8 plus , update/retore ke time pe anne wale error 9 ka salution btaya giya hai.

Teknisi Irepair ABA sedang melakukan proses pengerjaan servis iPhone. Our official website: https://www.irepairaba.co.id Video kami persingkat dan percepat ...

Dear friends a warm welcome to my Chanel here i am describing about how to solve C 3102 error in konica minolta 6500 6501 5500 5501 6000 7000 please do ...

I didn’t even know that the Sweet Life 2 device gives so much money! Check it out for yourself. Please register...

bad parts cause 4013 error or random message ...

Here I am Describing about how to solve C 4521 error in Konica Minolta, C 4521 error in Konica Minolta is very easy and customer can solve the issue how to ...

como configurar wifi repeater n - repetidor 300mbps amplificador wireless spotify mod offline ativador windows 7 kmspico minecraft versao 0.13.0 iptv globo hd driver samsung np370e4k windows 7 como mudar a letra do celular como hackear o wifi do vizinho modo download lg e470f pack carros brasileiros gta sa

debojj.net

iPhone error codes part two. Possible Solution

Let's proceed to the second part of our collection of iphone errors and analyze errors from 414 - 20008 and try to find a solution to these iphone errors.

Error 414

You do not have the right to upload content rated 17+ to your device.

Solution: Correct the age information in your iTunes account(menu "Store-View my account")

Error 1002

An error occurred while copying firmware files to the device.

Solution: Start the flashing procedure again

Error 1004

Apple servers were unable to send SHSH hashes for the device

Solution: Try flashing later

View my account")

Error 1011, 1012

iPhone/iPad modem does not respond

Solution: Try rebooting your device. If the error persists, there may be a hardware problem.

Error 1050

Apple activation servers are unavailable

Solution: Try activating your device later

Error 1140

Can't sync photos from iPhoto

Solution: From the context menu of the iPhoto library file, select Show Package Contents and empty the iPod Photo Cache folder

Error 1394

System files are damaged as a result of an unsuccessful jailbreak

Solution: Restore the firmware and jailbreak again

Error 1413-1428

Problems with data transfer via USB cable

Solution: Check the integrity of the cable and the functionality of the USB port

Error 1608

iTunes components are damaged

Solution: iTunes Reinstallation Required

Error 1609

iTunes version is too old to work with your device

Solution: Update iTunes to the latest version

Error 2001

Mac OS X drivers block access to device

Solution: Update Mac OS X to the latest version

Error 2002

Others are blocking iTunes access to your device system processes

Solution: Close all other programs, turn off the antivirus, restart your computer

Error 3123

iTunes can't rent videos

Error 3195

The received SHSH hash is corrupted

Solution: Try starting flashing again

Error 3200

The custom firmware lacks the required images

Solution: Download another custom firmware or create it yourself again

Error 4000

Conflict with other USB devices

Solution: Try disconnecting all other USB devices from the computer except the keyboard, mouse and the USB gadget being flashed

Errors 4005, 4013

Critical error during update/restore

Solution: Try restoring the device in DFU mode (Home+Power for 10 seconds, then Home for another 10 seconds). It is advisable to try a different USB cable.

Error 4014

The firmware file cannot be uploaded to the device

Solution: Try flashing on another computer and/or with a different cable

Error 20008

Error 0xE800003D

iTunes conflicts with TinyUmbrella utility

Solution: Update TinyUmbrella and restart your computer

Error 0xE800003D

iPhone or iPad can't access carrier settings files

Solution: Correct access rights (if the gadget is jailbroken), remove all custom operator bundles, or, as a last resort, restore the firmware

Error 0xE8000065

Error when trying to install custom firmware

Solution: As a rule, the error occurs when working with firmware created in sn0wbreeze. Restart your computer, try flashing again, if unsuccessful, create the firmware again

www.mobileoc.ru

iPhone error codes part one. Possible Solution

Hi all! Often, when performing various operations, the iPhone appears unknown errors. We have collected the most common iphone error codes and offer possible solutions to iphone errors

Error 1

This error may appear if you decide to flash your iPhone with the wrong firmware version!

Solution: Make sure that this firmware fits iPhone. If you are sure that it is up to date, then simply update iTunes to the latest version.

Error 2

This error is very rare, because it appears when updating iPhones of previous generations to unofficial firmware with hackactivation and an ASR patch.

Solution: Find a different firmware.

Error 3

The modem reports a fault

Solution: Most likely, only contacting an authorized service center will help.

Error 4

iTunes can't connect to Apple service servers

Solution: Check if third-party programs are blocking access to albert.apple.com, photos.apple.com or phobos.apple.com servers

Errors 5, 6,

The firmware cannot be installed either because the boot logos are damaged, or because the device is entered into the wrong service mode (for example, the firmware is intended for DFU Mode, and you are trying to recover via Recovery Mode)

Solution: Enter the device into DFU Mode, if it doesn’t help, download another firmware

Errors 6, 10

This error occurs when installing unofficial firmware with boot recovery logos different from the standard ones.

Solution: Reflash the iPhone using another unofficial firmware without custom boot recovery logos, or use a proven custom (unofficial) firmware.

Error 8

The firmware is suitable for the iTunes version, but not suitable for the device (for example, it is for the wrong generation of the device)

Solution: Download the firmware version that matches your device model

Error 9

Kernel Panic - this error is similar to the “blue screen of death” in Windows computers. It means that there was a failure in the kernel of the iOS system.

Solution: Practically does not occur when using standard firmware. If you are using unofficial firmware, then you need to look for a new one.

Error 10

It may appear when using unofficial firmware. If you encounter such an error, it means that it is missing LLB (Low Level Bootloader), which is responsible for booting the system.

Solution: Download new custom firmware.

Error 11

The firmware is missing a number of files needed for downloading

Solution: Download another custom firmware or rebuild it yourself

Error 13

Problem with the USB cable or 30-pin connector or attempt to install beta version of iOS from Windows

Solution: Change the cable or USB port. Disable USB 2.0 in BIOS

Error 14

During the flashing, a violation of the integrity of the firmware file was detected

Solution: Disable the firewall and antivirus, try changing the cable or USB port, try a different firmware

Error 17

Attempting to update from one custom firmware to another custom firmware

Solution: Before flashing the firmware, enter the device into Recovery Mode or DFU Mode

Error 18

iOS device media library damaged

Solution: It is highly likely that a flashing will be required

Error 20

Instead of DFU Mode, the device is in Recovery Mode

Solution: Enter the device into DFU Mode

Error 21

DFU mode error when jailbreaking

Solution: Enter the device into DFU Mode via Pwnage Tool, sn0wbreeze or redsn0w

Error 23

Solution: If the error repeats on other firmware, then the problem is hardware in nature

Error 26

NOR is not suitable for this firmware version.

Solution: Simply download another firmware file from a trusted source.

Error 27

Cyclic recovery error in iTunes versions 8 and 9b) Attempt iOS installations from iPhone 3GS to iPhone 3G

Solution: Update iTunes to at least version 10

Errors 27, 29

iTunes gets stuck in a loop when trying to restore firmware

Solution: Update iTunes to version 10

Error 28

Most likely the problem is with the iPhone's 30-pin connector.

Solution: This error can only be resolved by going to a service center.

Error 39

This error occurs when problems arise with a photo album or Internet access.

Solution: Create a new photo album, also update iTunes to the latest version and disable firewalls and antiviruses on your computer.

Error 47

There is a hardware problem with the U601_RF chip, which stores the IMEI. Additional signs: in the information “About this device” there is no data in the “IMEI” and “Modem firmware” fields.

Solution: Take the device to a service center to replace the U601_RF chip.

Error 54

Occurs when it is impossible to copy the application from the phone. Often appears when copying cracked applications or when copying licensed applications to a computer that is authorized in iTunes

• Initially, you need to authorize your computer in the iTunes Store. To do this, open the “Store” tab then “Authorize Computer”
• If it doesn’t help, then you need to go to the “Settings” “Synchronization” “Reset synchronization history” tabs, and then delete the folder located at C: Documents and Settings/All Users/Application Data/Apple Computer/iTunesSC/Info. After this, authorize the computer again.
• And one more solution. You need to go to the folder with your media library, then move the “Music” folder to another location. Synchronize your iPhone with iTunes, then return the “Music” folder to its original place and synchronize again. And the most difficult method. For advanced users only:
• Open Cydia and download SwapTunes. This tweak allows you to sync your iPhone with multiple media libraries;
• Launch SwapTunes;
• Open iFile and go to var/mobile/media/;
• Find the iTunes_Contrlol2 folder and remove the number 2 from the name;
• The iTunes Control folder should only be deleted after it has been created new folder
• Now you can remove SwapTunes and sync your phone with iTunes.