Operating experience of Xiaomi Mi A1. Xiaomi Mi A1 firmware Xiaomi mi a1 global firmware


But they are also regularly updated to new versions of the system. Updates usually arrive on smartphones over the air, but they are also published on the official forum, where you can download and flash them yourself.

The update for Mi A1 and A2 Mi comes in the form of firmware for the fastboot method, that is, in the form of an archive with the .tgz extension.

How to flash Xiaomi Mi A1 and A2 Mi?

First you need to unlock the bootloader.

This procedure is very similar to what is done to unlock smartphones with MIUI.

First way:

  • You need to go to the unlocking site and leave a request for unlocking there.
  • You need to download the unlocking program from the official forum.
  • After receiving permission to unlock, you need to connect the smartphone to the computer in fastboot mode, launch the program and follow its instructions.

Second way:

  • Enter the smartphone into fastboot (Volume down button and Power button long press);
  • Connect your smartphone to your computer;
  • Call the command console (In the search, enter “Command Prompt” and click on the application shortcut, or through the context menu, click on the “Open command window” item);
  • In the console, enter the command “fastboot oem unlock” and press Enter.

Firmware for A2 Mi and Mi A1 smartphones.

  • Download the Mi Flash Tool from the official forum;
  • Enter the smartphone into fastboot state;
  • Connect it to your computer;
  • Unpack the archive with the firmware (with the extension .tgz) to disk;
  • Launch Mi Flash Tool and press the Select button, specifying the path to the folder where you unpacked the firmware;
  • Click Refresh and see that your device is displayed in the list of devices (a set of letters and numbers);
  • In the bottom line, select the firmware method: Clean All - all data and files will be destroyed, Save User Data - only system files will be erased, user data will be saved (not recommended), Clean all and lock - all data and files will be erased, and the smartphone bootloader will be restored will be blocked as before the firmware.
  • Click the Flash button and wait. The process can take up to 10 minutes. Then the smartphone will reboot and the firmware will be installed. The first start after flashing can last up to 10 minutes, don’t worry.

What problems might there be?

1. I don’t receive an SMS about permission to unlock the bootloader.

If more than two days have passed, try sending the application again, or use the second method.

2. The device does not appear in the list in the Mi Flash Tool.

Check if you have specified the path to the folder with the firmware correctly. The smartphone battery is charged. Is it in fastboot state?

3. After flashing the firmware, the smartphone does not boot; only the Android One logo appears on the screen.

This is a case of bootloop - constant rebooting. We need to flash the smartphone again.

Make a backup in Settings-System-Backup. All data from your smartphone will be uploaded to your Google Drive.

Have fun with your A2 Mi and Mi A1 smartphones!

Google specialists, who created the software for Xiaomi Mi A1 MIUI 9, developed the gadget in such a way that this device became very fast, so updates take place much faster. The battery life of this smartphone has also become longer. If you lack the functionality that the stock firmware has, then you can simply install the latest update. Thanks to the presence of all this, the smartphone owner has new opportunities that bring only positive emotions. Let's see how the Xiaomi Mi A1 MIUI 9 firmware improves the performance of the smartphone?

If suddenly there is a problem with the installation, then you can use a special program that will allow you to make the necessary update.

In addition, it becomes possible not only to install new software, but also to avoid many troubles, for example, regular system errors.

Download and install drivers

Every PC owner strives to ensure that his machine has excellent contact with his smartphone. For this to happen, you need to take care of installing drivers. Check what program is on the computer, and based on this, install drivers that will improve performance as much as possible. Here everything depends on what Windows costs: 7, 8, 10. Based on this, the necessary option is selected.

  1. If you have seven, then you will have to restart the PC, and when it boots again, press the F8 key. You need to do this quickly three or four times. This will launch the BIOS. After this, you will see a number of commands that are additional in order to load the OS. In these very options, to carry out the download you need to enable “Disable mandatory driver signing”.
  2. If ten or eight is installed on your PC, then find on the keyboard and press the “Shift” key, then use the mouse to restart the computer with the desired button in the “Start”. Then follow the path “Diagnostics”, as well as “Advanced options”, and also “Boot options”, “Reboot”. After completing these steps, the computer will reboot. Then press F7 and disable the required signature verification.

Firmware for Mi A1 - how to download?

To do this, you need to find this program on the Internet and download it to your computer.

However, not everything is so simple, because in order to be able to use a smartphone in this regard, the bootloader must be unlocked.

Each mobile phone that runs on Android OS has a special bootloader, which provides the boot that is necessary for the computer system. This is usually blocked, because it is beneficial for manufacturers that you use the regular version of Android, which was developed specifically for this equipment.

To bypass the blocking, you can use special programs found on the Internet. You can download them to your personal computer, and then follow the link where you can submit a request to remove the blocking. After this, you can enter what is called Fastboot mode.

What do I need to do?

In order to switch the smartphone to this mode, you must first turn off the device, then press the keys at once that are responsible for activating and decreasing the volume. If you see a bunny wearing earflaps and a red star, then it means that you have achieved your goal.

After this, you can open the Mi Unlock application and connect the phone to the computer using a cable. Then log in to be able to bypass the blocking. Then unlock it, by the way, in this regard, you can always find instructions that will help with this.

Download and install the application

Next, you need to think about how to download the Xiaomi Mi A1 MIUI 9 firmware and install it. To do these steps, you first need to download and then unpack the archive, which contains the Mi Flash Tool you need.

After which, all this needs to be installed on your computer. Next, run the exe file. The further installation path is completed using the “Next” button. When the installation is completed, you need to confirm three times that the driver has been installed.

A request from the system will appear that is responsible for the security of the program, but do not pay attention. Reply anyway to allow the installation to continue. After the installation is complete, instructions will appear that will tell you about setting up the smartphone and accessing the internal memory.

After you carefully read these instructions, you need to click on “end”, more precisely there it will be “End”. Now let's look at how MIUI is installed on Mi A1.

Steps and actions to flash Xiaomi Mi A1 MIUI 9 firmware

So, in order to be able to flash your Mi A1, you need to do the following:

  • First you need to download the software version that is current today.
  • After that, turn off the phone and enter Fastboot mode. Next, connect your phone to your computer.
  • Open the archive, extract the ROM file to the root of drive C. Copy the path to this file;
  • Launch Mi Flash Tool. To do this, insert into the address line the path to the file that you unzipped. After that, click “refresh”. All this will allow you to complete the update. If the drivers were installed correctly, then Mi Flash will quickly find the smartphone.
  • Next you need to click “flash” in order for the new software to be installed on your mobile phone. The firmware process using Fastboot is completed after the scale turns green. After this, the gadget will reboot.
  • It is worth paying attention to the fact that the initial download process can last quite a long time. But there is no need to worry about this, because this is quite normal. Just wait patiently.

Results

As you can see, there is nothing complicated in this process. Perform all these actions one by one and you will achieve the desired results and goals that you are pursuing. Let everything work out quickly and efficiently, as you need. Also read on our website about.

. In essence, this is the same Mi5X, whose review, but... But still, there is a difference between them.

I don’t see the point in talking for a long time about the appearance of the smartphone, because Andrey has previously recorded a video for you with a detailed description of the design.

I’d rather express my impressions of the product and tell you what the difference is between Mi A1 and Mi5X, and whether it’s worth buying at least one of these two devices.

Iron

Technically, both smartphones have virtually no differences. Except for one thing - Xiaomi Mi A1 supports work in the 20th band, which is important for working in 4G networks.Many people were interested in the question: if you flash Mi5X with firmware from Mi A1, will it support band 20? I answer: “No, it won’t.” It is this moment that should make many pay attention to the Mi A1. Many, but not all. For those who do not use 4G, this should not be interesting at all. And for those Russians who don’t live in Moscow, it’s not much either.

In games, the situation has not changed either. Even heavy games can be played at medium settings without problems. At the same time, the heating of the case is insignificant.



Firmware

As you already know, the main thing you should pay attention to is the firmware.And here is the dilemma: pure Android or the proprietary interface from Xiaomi - MiUi 9. In practice, the significant difference will only be in the interface design, believe me... Yes, pure Android works much faster. But I can’t say that this difference will be noticeable in everyday use.


It’s also good that the A1 will be officially updated to version 8 of Android, which is worth waiting for on your smartphone. So, when choosing between mi 5X and Mi A1, you need to think carefully about whether you really need the features that the MiUi interface offers, such as picture-in-picture, display color temperature settings and other such things. If not, feel free to choose a pure android. If you still need it, then you can’t escape MiUi, choose Mi 5x.

Cameras

According to the cameras, these two smartphones are like two peas in a pod. For the money, the main camera of the Mi A1 takes excellent pictures. Even portrait mode can be used quite well.But the video is not very well recorded: the smartphone really lacks stabilization. And the front camera is mediocre. It’s strange that the more budget smartphone Redmi Note 5A Pro takes better pictures. But let the mysterious Xiaomi engineers answer this question better.I will pay off the debt for Andrey. He promised to demonstrate to you in a full review the operation of the camera with a proprietary application from Google, with the HDR + function. So that you too can install this application for yourself, Andrey made a separate video instruction.

Let's look at a couple of photos taken on Xiaomi Mi A1 and Meizu M6 Note, in which the HDR mode is implemented quite well.

Xiaomi Mi A1:



Meizu M6 Note:

Xiaomi Mi A1:



Meizu M6 Note:



Well, I think you can see the difference yourself. HDR+ is great as always. But, at the same time, you should know that the HDR mode will no longer work for you in the standard camera application, and the portrait mode will not work in the Google camera. So you'll have to use two camera apps. But an ordinary smartphone will become a quite suitable camera phone.

Battery

In terms of battery life, I didn’t notice any difference between Mi5X and Mi A1. It may be present in synthetic tests, but for everyday use, both smartphones need to be charged once a day. So in this regard, don’t expect a miracle from a pure android.


Sound

I was pleased with the sound in the headphones, despite the lack of any dedicated audio chips. The detail is fine and the volume level is also very good.

Summing up

To summarize, I want to say that the Mi A1 is the Xiaomi smartphone that you want to continue using, and not just test and change it to another. Yes, it has disadvantages: lack of NFC and lack of fast charging. But this is not a flagship, but a middle-class smartphone.

Of course, you can find an alternative to it. The same Redmi Note 4X or Meizu M6 Note.
But these smartphones will not be able to offer you pure Android and a guarantee that in the future they will receive an update to 8K. https://goo.gl/nJtVEQ

But don’t know how to flash Xiaomi via Fastboot? There is nothing complicated about this, you will need a PC or laptop, as well as straight hands and the ability to follow instructions.

Mi A1 firmware - instructions

Before you start flashing Xiaomi Mi A1 firmware via Fastboot, you should perform several preparatory steps. You should first charge the device so that the battery charge is 50% or more.

Please note that during the flashing process all data will be lost, so they should be copied first. After the preparation is completed, you can begin flashing the device.

Remember that you perform all of the above actions at your own peril and risk!

Step 1.

First of all, you need to download and install the latest version of Mi Flash Tool (cloud download link).

Step 2.

Download the firmware image for Mi A1 (link to download firmware from the official MiUI community, archive size 1.3 GB).

Step 3.

Turn off your smartphone. To enter Fastboot mode, hold down the power button and volume button.

Once Fastboot has loaded, connect your smartphone to your PC using a USB cable.

Step 4.

Open the pre-downloaded image archive and extract the ROM file with the firmware to the root of drive C.

Step 5.

Launch the Mi Flash Tool utility on your computer.

In the interface, select “select” to select the image with the firmware. After that, select “refresh” to refresh the list of devices connected to the PC and detect the Mi A1 smartphone.

Then select the bat file below.

Now one of three firmware options will be available:

  • Cleanall: All user data and settings will be deleted. After flashing the device, the device will be unlocked.
  • Saveuserdata: All user data and settings will be saved. The locking status of the device after flashing will change depending on its model.
  • Cleanallandlock: All user data and settings will be deleted. After flashing the device, the device will be locked.

Step 6.

That's all, now you can start flashing the firmware. To start the process, you need to select the “Flash” item.

After the scale turns green, the Mi A1 firmware via Fastboot will be completed and the device will automatically reboot. Don’t panic if it takes a long time to boot your device for the first time after flashing it; this is normal for Xiaomi.


2024 gtavrl.ru.