Netgear N300 Wi-Fi router review: description, characteristics and reviews from owners. Detailed instructions for setting up Netgear N300

New generation routers are becoming more and more complex in design, while becoming, at the same time, easier to use and configure, so an article on how to configure a NETGEAR router using the example of the NETGEAR N300 model will be useful to many. Today, even an ordinary user is able to create a wired or radio connection to the Internet, holding in his hands step-by-step algorithm actions.

Preliminary preparation of devices

To start connecting the n300 router to the Internet, you need to perform a number of preliminary operations:

• Connect the power supply to the rear panel and turn on the device;
• Insert the WAN cable and connect the PC using a second switch cable (inserted into one of the five dedicated ports);
• Press the power button, which is moved to the front panel for this model.

After these manipulations, the indicator lights should indicate that the device is turned on in one of the ports and the power cord is connected to the router, which means: you can proceed to software configuration.

It starts with setting automatic IP acquisition and DNS addresses router. To do this, we need to get into the settings panel of the wired and wireless network adapter. The algorithm for Windows 7 and 8 is as follows:

• Cry right click mouse by icon network connection in the right corner of the monitor;
• Open the Control Center and select adapter settings settings in the side menu;
• Right click – properties of the current cable connection;
• In the window that opens, look for the line of settings for the fourth version of the Internet protocol, open the properties (by clicking on the button a little lower);
• The settings selectors for both items in the new window must be set to automatic;
• Save the settings and close the open windows.

Setting up the modem

To get to the router’s web configurator area and connect to the Internet, you need to address bar any browser enter the following ip – 192.168.1.1

To enter the settings, open your browser and enter the address: HTTP://192.168.1.1

Then in the form that appears, enter the login “admin” and password “password”. Click on Ok and get to the main settings menu. A special feature of the Netgear n300 model is that the instructions for setting up the connection will differ for different Internet providers. And the first difference is the presence of dynamic or static IP.

If your provider (and most of them) works with dynamic ip addresses(that is, you are assigned new address for each new session), then the setup should proceed as follows:

• In the menu on the left, select Internet;
• We refuse to enter information when connecting to the Internet;
• In the name account and we don’t specify anything about the domain;
• We indicate automatic acquisition of IP addresses and DNS servers;
• In the event that the provider does not work with binding to MAC addresses, leave this settings item with the default value and set “the address of this PC” otherwise;
• Save the changes and check the connection is working.

If your supplier uses a connection using the PPPoE protocol, for example, like Rostelecom or DOM.RU, setup is carried out as follows:

• Open the Internet menu item;
• In the first selector we set the value to “Yes”;
• Next, select the connection type “PPPoE”;
• Below we indicate the authorization data that the provider provided to us in the contract;
• The network connection mode must be constant, so “Always on”;
• Just like in the previous case, we select automatic installation addresses;
• If your provider is Dom.ru (it uses binding to MAC addresses), set the selector to use your computer’s address in the last setting item;
• We save the results and open any site to check.

If your provider uses an L2TP connection, as is the case if your operator is Beeline, the instructions above will change as follows:

• Instead of PPoE, select the connection type for your router - L2TP;
• We manually enter the server address of the Internet provider (for Beeline this is tp.internet.beeline.ru).

Otherwise, we use the same settings (without binding to the MAC address of your device). We check the automatic receipt of IP and save the changes. After that wired network The Netgear n300 router should work.

Wi-Fi setup

In order to connect wifi network On the n300 model, follow these steps:

• Open the item from the menu on the left “Wi-Fi network”;
• A new window opens: in the line with the name, set the name for your wireless connection;
• Channel selection can be left automatic, or you can set your own value if there are many other wireless networks around;
• The connection mode should pass up to 300 Mbit/s;
• In the security settings, select the last selector (the most advanced encryption type);
• In the area for specifying the password, enter our key, which should contain numbers and letters (preferably in different case);
• We apply the changes and try to log into a website via wifi.

How to update the firmware?

To ensure that the router can be connected to the Internet without problems in the future, you need to install latest version Software, that is, reflash the device. This is done in several stages:

• The first step is to go to the manufacturer’s official website and download the latest firmware version, for example jwnr2000v2;
• We disconnect the device’s Internet cable, but leave the one that connects it to the computer;
• Go to the device settings menu, click on the firmware number in the page header;
• Select the update file on your computer by clicking the Browse button;
• We load, wait until the router reboots and we can go into the settings again;
• Download the configuration file from the official website or from disk;
• Select the “Manage settings” item in the router menu, then “Restore settings”;
• Loading from a computer required file and wait for it to install.

Then try going to the settings page again, and then insert the WAN cable (Internet) and log into any website. If everything works, congratulations! You managed to connect the Internet to your Netgear router yourself.

If something goes wrong, you can return the settings to factory settings. For this purpose, there is a Reset button, holding which you need to wait 10-15 seconds. Then we release it and wait for the n300 to start. After this, you can try setting up the Internet again and updating the firmware.

Found a typo? Select the text and press Ctrl + Enter

New generation routers are becoming more and more complex in design, while becoming, at the same time, easier to use and configure, so an article on how to configure a NETGEAR router using the example of the NETGEAR N300 model will be useful to many. Today, even an ordinary user is able to create a wired or radio connection to the Internet, having in his hands a step-by-step algorithm of actions.

Preliminary preparation of devices

To start connecting the n300 router to the Internet, you need to perform a number of preliminary operations:

• Connect the power supply to the rear panel and turn on the device;
• Insert the WAN cable and connect the PC using a second switch cable (inserted into one of the five dedicated ports);
• Press the power button, which is moved to the front panel for this model.

After these manipulations, the indicator lights should indicate that the device is turned on in one of the ports and the power cord is connected to the router, which means: you can proceed to software configuration.

It begins with setting the router to automatically obtain IP and DNS addresses. To do this, we need to get into the settings panel of the wired and wireless network adapter. The algorithm for Windows 7 and 8 is as follows:

• Right-click on the network connection icon in the right corner of the monitor;
• Open the Control Center and select adapter settings settings in the side menu;
• Right click – properties of the current cable connection;
• In the window that opens, look for the line of settings for the fourth version of the Internet protocol, open the properties (by clicking on the button a little lower);
• The settings selectors for both items in the new window must be set to automatic;
• Save the settings and close the open windows.

Setting up the modem

To get to the router’s web configurator area and connect to the Internet, you need to enter the following ip in the address bar of any browser - 192.168.1.1

To enter the settings, open your browser and enter the address: HTTP://192.168.1.1

Then in the form that appears, enter the login “admin” and password “password”. Click on Ok and get to the main settings menu. A special feature of the Netgear n300 model is that the instructions for setting up the connection will differ for different Internet providers. And the first difference is the presence of dynamic or static IP.

If your provider (and most of them) work with dynamic IP addresses (that is, you are assigned a new address for each new session), then the setup should proceed as follows:

• In the menu on the left, select Internet;
• We refuse to enter information when connecting to the Internet;
• We do not indicate anything in the account and domain name;
• We indicate automatic acquisition of IP addresses and DNS servers;
• In the event that the provider does not work with binding to MAC addresses, leave this settings item with the default value and set “the address of this PC” otherwise;
• Save the changes and check the connection is working.

If your supplier uses a connection using the PPPoE protocol, for example, like Rostelecom or DOM.RU, setup is carried out as follows:

• Open the Internet menu item;
• In the first selector we set the value to “Yes”;
• Next, select the connection type “PPPoE”;
• Below we indicate the authorization data that the provider provided to us in the contract;
• The network connection mode must be constant, so “Always on”;
• Just as in the previous case, we select automatic installation of addresses;
• If your provider is Dom.ru (it uses binding to MAC addresses), set the selector to use your computer’s address in the last setting item;
• We save the results and open any site to check.

If your provider uses an L2TP connection, as is the case if your operator is Beeline, the instructions above will change as follows:

• Instead of PPoE, select the connection type for your router - L2TP;
• We manually enter the server address of the Internet provider (for Beeline this is tp.internet.beeline.ru).

Otherwise, we use the same settings (without binding to the MAC address of your device). We check the automatic receipt of IP and save the changes. After this, the wired network of the Netgear n300 router should work.

Wi-Fi setup

In order to connect a wifi network on the n300 model, follow these steps:

• Open the item from the menu on the left “Wi-Fi network”;
• A new window opens: in the line with the name, set the name for your wireless connection;
• Channel selection can be left automatic, or you can set your own value if there are many other wireless networks around;
• The connection mode should pass up to 300 Mbit/s;
• In the security settings, select the last selector (the most advanced encryption type);
• In the area for specifying the password, enter our key, which should contain numbers and letters (preferably in different case);
• We apply the changes and try to log into a website via wifi.

How to update the firmware?

To ensure that the router can be connected to the Internet without problems in the future, you need to install the latest version of the software, that is, reflash the device. This is done in several stages:

• The first step is to go to the manufacturer’s official website and download the latest firmware version, for example jwnr2000v2;
• We disconnect the device’s Internet cable, but leave the one that connects it to the computer;
• Go to the device settings menu, click on the firmware number in the page header;
• Select the update file on your computer by clicking the Browse button;
• We load, wait until the router reboots and we can go into the settings again;
• Download the configuration file from the official website or from disk;
• Select the “Manage settings” item in the router menu, then “Restore settings”;
• Download the required file from your computer and wait for it to install.

Then try going to the settings page again, and then insert the WAN cable (Internet) and log into any website. If everything works, congratulations! You managed to connect the Internet to your Netgear router yourself.

If something goes wrong, you can return the settings to factory settings. To do this, there is a Reset button on the back panel of the device, which you need to hold and wait for 10-15 seconds. Then we release it and wait for the n300 to start. After this, you can try setting up the Internet again and updating the firmware.

Found a typo? Select the text and press Ctrl + Enter

Netgear routers are still rare in the post-Soviet expanses, but they have managed to establish themselves as reliable devices. Most of the routers from this manufacturer that are on our market belong to the budget and mid-budget classes. One of the most popular are the N300 series routers - the configuration of these devices will be discussed further.

First of all, it’s worth clarifying important point– index N300 is not a model number or designation model range. This index indicates maximum speed adapter built into the router Wi-Fi standard 802.11n. Accordingly, there are more than a dozen gadgets with this index. The interfaces of these devices are almost the same, so the example below can be successfully used to configure all possible variations of the model.

Before starting the configuration, the router must be properly prepared. This stage includes the following actions:

After these manipulations, we move on to configuring the Netgear N300.

Configuring N300 family routers

To open the settings interface, launch any modern Internet browser, enter the address 192.168.1.1 and go to it. If the address you entered is not correct, try routerlogin.com or routerlogin.net. The login combination will be admin as the login and password as the password. You can find the exact information for your model at back side housings.


will appear before you home page router web interface - you can start configuring.

Internet setup

Routers of this model range support the entire main range of connections - from PPPoE to PPTP. We'll show you the settings for each option. Settings are located in points "Settings" — "Basic settings".


On the latest options firmware, known as NetGear genie, these parameters are located in the section “Add. settings", tabs "Settings" — "Internet Settings".


Location and name required options identical on both firmwares.

The PPPoE connection on the NetGear N300 is configured as follows:

The PPPoE connection is configured.

A connection using the specified protocol is a VPN connection, so the procedure is slightly different from PPPoE.

Note! Some older NetGear N300 variants do not support L2TP connection, a firmware update may be required!

PPTP, the second VPN connection option, is configured as follows:

Dynamic IP

In the CIS countries, the type of connection using a dynamic address is gaining popularity. On Netgear N300 routers it is configured like this:

Static IP

The procedure for configuring a router for connecting via static IP is almost the same as for dynamic address.

As you can see, setting up both static and dynamic addresses is incredibly simple.

Wi-Fi setup

For the wireless connection to work properly on the router in question, you need to make a number of settings. The necessary parameters are located in "Installation" — "Wireless Settings".


On Netgear genie firmware, the options are located at “Add. settings" — "Settings" — « Wi-Fi setup networks".

To configure a wireless connection, you need to do the following:

If all the settings are entered correctly, a Wi-Fi connection with the previously selected name will appear.

WPS

Netgear N300 routers support the option "Wi-Fi Protected Setup» , abbreviated as WPS, which allows you to connect to a wireless network at the touch of a button special button on the router. More details You will find information about this function and its configuration in the corresponding material.

This concludes our Netgear N300 router configuration guide. As you can see, the procedure is very simple and does not require any specific skills from the end user.

In order to get to the router’s web interface, you need to open your Internet browser and type 192. 168.1.1 in the address bar. In the window that appears, enter “admin” as the username and “password” as the password.

When you log in, the software update check page appears.

After updating, if required, you will be taken to the installation wizard. If before current moment the router has not been configured or is in the factory settings state, you will see the settings wizard page. There are two installation options to choose from. We will look at setting all the necessary parameters manually

When asked by the wizard, select " No. I want to configure the router myself." and press " Next>".

Changing the factory password

For security reasons, it is recommended to change the factory password. To do this, go to the menu " Set password" and specify the default password as the password, that is, " password", and as the new password your desired password. And click on the button " Apply". After applying the new settings, you must log in to the system again by entering your New Password .

Setting up an Internet connection

Depending on your provider and its settings, you must select one or another connection mode. Let's consider each of them in order.

Setting up a connection in DHCP mode (dynamic IP)

The first mode is DHCP mode, which automatically receives network settings from the provider. In this case, you must select “No” to the question “Do I need to enter connection information when connecting to the Internet?” and specify “Obtain dynamically from the Internet service provider” for the “Internet IP address” field (this field is not visible in the figure) and “Obtain automatically from the Internet service provider” for the “DNS server address (domain name server)” field. If the provider uses MAC address binding, and you are setting up a router from a PC that was previously connected to the Internet, then for the “Router MAC address” field, specify the “Use computer MAC address” option. If the provider does not have a MAC address binding, then leave the default option - the “Use default MAC address” option. And click the "Apply" button.

After applying the settings, we can successfully use the Internet.

Setting up a connection in static IP mode

The second mode is static or in another way fixed settings, which are usually specified in the contract concluded with your provider. For settings this mode Similarly, we answer “No” to the question “Do I need to enter connection information when connecting to the Internet?” and specify the “Use static IP address” option in the “Internet IP address” field. Next, you need to enter the settings that your provider provided to you. For example, IP address: 10.0.0.100; IP subnet mask: 255.255.255.0; Gateway IP: 10.0.0.1. In the DNS server address (domain name server) field, indicate “Use these DNS servers" and enter: the IP address of the main DNS and the IP address of the secondary DNS, if we have one, for example: 10.0.0.1. Similar to the setup case in the first mode, we select to use the computer’s MAC address if the provider uses MAC address binding. Or we leave it to use the default MAC address if there is no binding. Then click the "Apply" button.

Configuring PPtP (VPN) while automatically obtaining a local IP address (DHCP)

This is a type of VPN connection. To configure it, you must select “Yes” to the question “Do you need to enter connection information when connecting to the Internet?” and select “PPTP” from the drop-down list of Internet service providers. If you want the router to always remain connected to the Internet, select as connection mode "Always on". Otherwise, you can set an inactivity interval in minutes, after which the router will automatically disconnect from the Internet. Or you can select completely manual connection via the web interface.

The "PPTP" protocol requires not only a mandatory username and password, and the VPN server address for connection, but is also divided into two variants common in Russia. Their difference is in how the settings for connecting to local network provider: dynamically via DHCP protocol or are set statically by the user. In both cases, you must first indicate your login in the “Username” field and your Internet password in the “Password” field. Then you need to specify the server address in the "Server Address" field. The server address can be in the form of an IP address, for example, 10.0.0.138 or in the form of a domain name, for example, vpn.internet.beeline.ru.

Setting up PPtP (VPN) with a static local IP address

If you have access to the provider's local resources, you need to configure Extra options connections. If they are obtained automatically or the provider did not provide them to you, then usually you do not need to enter anything additional! If you have data indicating the IP address, subnet mask, gateway and DNS servers, then you must enter them in the appropriate fields: “My IP address”, “Subnet mask”, “Gateway IP address” and “Main DNS ", " Additional DNS" (some fields are not visible in the figure). If the provider uses MAC address binding, also select the "Use computer MAC address" option. Then click the "Apply" button.

Setting up a PPPoE connection

The "PPPoE" connection mode is completely similar in its settings to the previous modes. We fill in the fields “User name” and “Password” (we take the data in the agreement with the provider), “Service name” - enter any name for the future connection. “Internet IP address” - put a dot on “Get a dynamic one from your Internet service provider.”

After selecting the mode of the required Internet connection and the appropriate settings, the router should automatically connect to the Internet. You can verify this by going to the “Router Status” menu and clicking the “Connection Status” button.

Setting up an L2TP connection

1. Connection type - L2TP
2. Username and Password- login and password from the contract
3. Connection mode- Always on
4. Server address- enter the IP address or name of the VPN server according to the contract
5. DNS server IP address- receive automatically from the provider
6. Router MAC address- use default address
7. The remaining parameters can be left unchanged. Click Apply.

Setting up Wi-Fi on the router

To configure wireless network security, you need to go to the "Wireless Connection Settings" menu. Here you can set your own network name, which will be visible to wireless Wi-Fi devices. Leave the region as "Russia". Number wireless channel It is also recommended to leave it unchanged in the “auto” mode. You also need to set the connection mode and security parameters. As a connection mode, it is recommended to use the maximum possible mode, if you have appropriate wireless adapters that support new standards with operating speeds of up to 150 or 300 Mbit/s. Otherwise, it is enough to specify a mode of up to 54 Mbit/s. It is recommended to use the most modern security modes, for example, WPA2-PSK with encryption, as it gives maximum performance and network protection. After selecting this mode, you must set a password phrase that will be used to connect all wireless wi-fi devices to the router. Try to use a difficult phrase and write it down! Using combinations like "qwerty" or "1234567" can be hacked by attackers in a matter of seconds. After entering the passphrase, click the "Apply" button and connect your wireless devices, PC to router using given key security.

Forwarding and port forwarding

Let's go to Additionally - Port Forwarding/Port Initiation.

Click Add own service . Service name- Name created service Service type- select the protocol you need External start/stop port And Internal start/end port- port range Server IP address - network address device to which the request will be redirected Click Apply.

The secret to the success of any router in the markets of our country is quite clear: low cost and a large set useful functions. The future owner doesn't need anything more. Thanks to these two significant criteria, the new Netgear N300 managed to be on the same shelf with similar D-Link devices, TP-Link, ASUS and others famous brands, which produces products for organizing wireless networks at home and in small offices.

The best router for home

The Netgear N300 WNR2200 is designed for the most ordinary users who need a router to organize a local network with Wi-Fi support and cable connections. Affordable price (1100 rubles) and great functionality make this device very attractive on the market

In addition to a wireless access point and a four-port hub, the router is equipped with one USB port that supports work with many well-known devices:

• 3G/4G modems (any device certified in Russia will work without problems);
• printers (the built-in print server can detect any printer, even an old one);
• An external drive or USB drive can be used as file storage (the device’s hardware support for torrents opens up new possibilities for the owner).

The router supports encryption of the wireless communication channel and also protects all connected devices via Wi-Fi from hacking. hacker attacks. Built-in Internet traffic monitoring provides reports on the connections of all devices on the local network, and intelligent system protection independently blocks suspicious resources and devices.

Equipment and appearance of an inexpensive device

The manufacturer's standard equipment will clearly appeal to the future owner: Netgear N300 router, setup instructions, patch cord, power supply, USB extension cord and stand for easy installation. Delights all owners, judging by their positive feedback, a small extension cord for connecting USB devices, because this is not an ordinary cord that users are used to seeing in everyday life. The connector for connecting devices is made in the form of a platform, which has considerable dimensions and weight, allowing it to hold the device on the surface where the owner wishes to place it (very convenient for connecting wireless modems).

Externally, the router resembles any similar budget-class device - an ordinary box that does not stand out in any way from its competitors. Is there too many ventilation holes on the sides and bottom of the router, which contribute to excellent cooling? internal components. As you might expect, an inexpensive router does not have external antennas.

Ease of setup

Setting up the Netgear N300 is quite simple if you follow all the steps strictly according to the instructions. Standard access from any browser at 192.168.1.1 with the introduction of login (admin) and password (password), will move the owner to the management menu wireless point access. The main thing here is not to get confused and remember one truth: there are not many settings themselves, but the manufacturer has provided them detailed description in the form of interactive tips, so it seems that managing the router will not be so easy.

Market leader in multifunctional routers

But the Netgear N300 JWNR2000 model is designed to satisfy all demanding users when creating a high-speed local network at home or in a small office. The manufacturer has equipped the device with wireless wireless Wi-Fi adapter to Ethernet, which allows you to connect stationary devices to the network, be it Personal Computer or plasma panel. If there are several devices, the user can purchase the same module in the store. Quite an interesting implementation if it is not possible to lay cables throughout the room.

The main disadvantage of this adapter is the absence for wired connections, but, as the owners assure in their reviews, just one connector looks poor. But, as the manufacturer assures, wireless interfaces will soon supplant the technologies of the last century. Do not forget that similar routers are limited in speed (100 megabits per second) for wired interfaces, and Wi-Fi transfers data three times faster.

All-In-One Features

The Netgear N300 router of the JWNR2000 series boasts fair data transfer at a speed of 300 megabits per second, because for this the manufacturer has implemented a hardware-level system that can build independent tunnels with connecting devices that are guaranteed to transmit data. to Ethernet uses directional radio antenna technology, allowing the signal to pass through several reinforced concrete walls with the slightest loss.

Built-in torrent client, USB hub (with print server support), many protective systems And firewalls, data encryption, guest WPS connections and many others modern technologies make the new product very attractive in market A affordable price(3000 rubles), clearly contribute to purchasing power in the domestic market.

Difficulty in setting up

Many owners are interested in the process of managing such a complex system, so you need to understand the Netgear N300 and the wireless adapter included in the kit. The instructions describe in detail the user's steps for the correct operation; they are no different from other devices from this manufacturer. Same interactive menu with lots of tips and intuitive interface. However, there is no word in the instructions about connecting the adapter.

Judging by the reviews of the owners, many took the easiest route: finding a WPS button on the adapter, they created a secure connection via the guest channel. The scheme works, but only when restart computer, both devices need to be synchronized again. Professionals recommend doing it differently: after connecting the adapter to your computer and finding a wireless network, you need to authorize via Wi-Fi, as is done on a laptop or phone. Having written down the MAC address of the connected computer (or TV), go to the router settings and in the table trusted devices(there is such a menu) set full privileges to the desired MAC address.

Portable devices

On the market, the buyer can come across another device from the well-known manufacturer Netgear Wireless N300 Trek. It is recommended for travelers and businessmen who are used to working without unnecessary wires. Portable device It is powered by a built-in battery, which can be charged even from a laptop. The convenience of the device in miniature sizes - after connecting to a wired local network in a hotel, the router independently creates Wi-Fi network in room. Naturally, before this the device must be configured. The instructions, available in any language, will help any user do this step by step - just two menu items can be configured in a few minutes.

As the owners note in their reviews, the portable router lacks support for a 3G/4G modem, because a repeater with such functionality would be much more useful when traveling, when you need to connect not only a laptop, but also other devices to the Internet mobile devices. Perhaps in the future the manufacturer will pay attention to user reviews and release a finished product.

Problems and their solutions

Many experts draw users' attention to timely update Firmware for Netgear N300 devices. As it turns out, there are many routers on the domestic market that have old version software that hackers managed to hack. For example, all modifications with firmware having the first serial number, have problems with unauthorized login: after introducing incorrect password access to the setup menu several times, the router provides administrator rights. The problem is solved by flashing the device. To do this, while on the router control panel, you need to go to the “Update” menu and install the latest software from the manufacturer's website (the Internet must be connected to the router).

The second problem that owners have to deal with is the ventilation system. Plastic grilles easily allow dust to pass through, which, settling on the boards, leads to overheating. You need to either clean the router once a year, or install it on a table and not on the floor.