The Acer laptop freezes and does not respond. The laptop battery is connected, but is not charging: reasons, what to do, solutions for brands lenovo (lenovo), hp, msi, asus (asus), acer, dell

Useful tips

Why does my Acer laptop freeze? Does this symptom indicate a serious problem with the laptop computer or can the problem be resolved with simple programmatically? The answers to these questions, as well as qualified assistance You can get your laptop back up and running at our service center.

What to do if your Acer laptop freezes?

In a situation where the laptop constantly freezes and does not allow you to work comfortably, it is best to immediately contact the manager and call an experienced technician. But if this is not possible, you can perform some actions yourself:

check HDD laptop computer. If it is more than 90 percent full, the cause of the problem has been identified. Remove everything unnecessary files, or transfer them to another drive to free up space;
perform a hard reboot. To do this, you need to hold down the power button until complete shutdown device, as well as disconnect the laptop from the network and remove the battery;
close all programs you are not using currently. It is quite possible that some of them overload the RAM or processor;
check the system for viruses that can significantly slow down the laptop.

If all this does not help, then the reason most likely lies either in a serious failure of the operating system or in overheating of the laptop. In the first case, the problem is easy to fix - you just need to reinstall Windows and properly configure it to suit your needs. You won't be able to get rid of overheating that easily.

Overheating as the reason why an Acer laptop freezes

Sony laptops are equipped with a very effective cooling system. But even after some time it begins to become clogged with dust that penetrates into the body through the radiator grille. If you ignore the need to clean the device, which should be done at least once a year, the dust will turn into thick felt that reliably holds hot air inside the laptop.

It is because of this that the Acer laptop often freezes. The motherboard, processor, video card and other components react to increased temperatures by reducing performance, which can even lead to spontaneous shutdown of the device. To avoid such problems, we suggest using our services for cleaning laptops from dust and providing high-quality preventative maintenance.

If your laptop freezes, then the cause of this problem may be a number of factors. Usually it is possible to fix the problem at home, but in order for the laptop to work without failures, you first need to find the cause of the breakdown.

Causes of the problem

Possible reasons for a laptop freezing can be roughly divided into two categories:

Hardware – problems with hardware, for example, overheating of components.
Software - errors in Windows work, viral infection etc.

If the device freezes when loading Windows, then it is most likely a hardware failure. If the system starts up and works for some time, then you need to pay attention to the state operating system, although there may be exceptions, which are discussed below.

Stuck when turning on and off

If the laptop freezes completely when turned on, then you should look for the reason primarily in the physical condition of the components. What problems lead to this situation:

Problems with RAM sticks - it is unlikely that you will be able to fix them yourself; you will need to disassemble the laptop.
Malfunctions hard drive– you can check the disk status using bootable flash drive with the Victoria program.
Laptop contamination and components overheating.

If the laptop slows down at the system boot stage, but before that it turns on normally, then try starting Windows in safe mode. On Windows 7, you can select safe mode through the menu, which is called up by pressing the F8 key when you turn on the computer. If the system boots in safe mode, you need to clear the startup list - one or more programs are slowing down Windows startup normally.

On Windows 8 and Windows 10, the F8 key does not work, so you will have to wait until the system starts. To clear startup:

If without programs in Windows autostart loads normally, then simply do not allow applications to load along with the system. Open the startup list again and mark only those programs that are vital - antivirus, applications for managing the video card. All other applications can be launched manually.

Another unpleasant situation is that the laptop works fine, but when it finishes working it starts to slow down terribly and doesn’t turn off for a long time. This is usually caused by a program or process that the system cannot terminate. At turning off Windows 10, a message box always appears telling you which applications are still running. You can return to the system, launch the task manager, and kill stubborn processes manually.

At the same time, check the system with an antivirus - there may be processes that prevent the computer from shutting down normally or are somehow harming the system.

Freezing during operation

If the laptop freezes a few minutes after turning it on, then try to detect some systematicity in the occurrence of problems. For example, Windows freezes after launching a game or program - this means that the problem is in the software that you are trying to launch. Reinstall it or uninstall it since the laptop cannot work with it.

Another reason could be incompatible drivers. If the problem occurs after connecting new hardware and installing software, then you should stop using this hardware or look for other drivers. If, for example, the mouse or other equipment freezes, and not the entire system, then you should also pay attention to the drivers and physical state devices.

There are no such obvious indicators - you will have to do a little research self-diagnosis laptop. If you are wondering how to reboot your machine to begin diagnostics, the answer depends on whether the laptop is responsive to your requests. If you can open the Start menu and click Restart, then use this method to restart.

Is your laptop frozen and not responding at all? Then you will need knowledge on how to turn off a frozen device. Press and hold the power button until the screen goes dark. If this does not help, then unplug the laptop and remove the battery from it - this is a last resort.

After turning it on, first check your laptop using an antivirus. Use not only the installed antivirus software, but also free utility Dr.Web CureIT, downloaded from the official website of the developer. By the way, if you bet on old laptop modern powerful antivirus, then it will also slow down mercilessly due to lack of resources.

A full hard drive can also cause the system to slow down or freeze. Open Computer and see how much space is left on system partition. If the bar turns red, then you have dangerously full the disk. Try cleaning it off extra files and programs. Also, remove temporary data:

Unfortunately, sometimes the cause of a laptop freezing is not only such a trifle as temporary files. The reasons may also be hardware in nature. If your laptop turns on and runs for a bit, then freezes and won't turn on again, and then after a while it turns on again and runs for a while, then you are definitely dealing with overheating components. To eliminate this drawback, you need to disassemble the laptop, clean it of dust and check the cooling system.

Problems may arise in work hard disk, motherboard, RAM. You can independently check the temperature of components using programs like Speccy or run RAM and hard drive tests in MemTest and Victoria. But in such cases it is difficult to diagnose the problem yourself, so it is better to contact service center to avoid even more serious problems.

A laptop is a personal portable computing device. One of its advantages is the ability to work certain time without connecting to the mains. However common problem Users are faced with a situation where the laptop battery is connected, but is not charging. This becomes an obstacle to working with a portable device. It is possible to independently determine the reason why the laptop stopped charging and eliminate it.

Main reasons

Mostly charging problems are caused by:

Battery wear. Any charger has a certain service life or set quantity charging. In such a situation it is necessary to replace old battery to a new one. If the computer device is new, then remove the battery and put it back in place.
Problems with the power supply. When the battery is on, you should pay attention to the condition of the motherboard. It contains a microcircuit with electrical circuits and power distributors. If it is damaged, the computer device will not be able to charge.
Energy failure. To resolve the error, you need to check the cable connection and network adapter laptop.
Contamination or oxidation of ATB contacts. The presence of dust or acid causes poor connection to motherboard. The best solution In this situation, thorough cleaning of the contacts is necessary. Next you need to start the battery again. Additionally, you should test the charging connector.

What to do

There are several ways to troubleshoot if the laptop does not charge when turned on.

Reset settings in BIOS

If in computer device battery not detected, then the problem is in the BIOS. This system software is necessary for stable operation.

The steps to reset the BIOS settings are performed in the following order:

Disconnect the charging unit.
Remove the battery.
Turn off the laptop by holding the on/off button.
Wait a couple of minutes, connect the power supply to the computer, and at the same time connect to the mains. There is no need to insert the battery.
Start the laptop and open the BIOS using the keys: F2, F12, Del.
Reset settings to factory defaults and save.
Turn off, disconnect the battery, put the battery in its original place.
Connect the laptop to the charger and press the start button.

The described method will help solve the problem and charge the device.

Removing utilities

If the laptop is turned on and does not charge, the problem may lie in special factory utilities. These auxiliary computer programs are designed to perform specialized tasks for the operation of equipment and the functioning of the operating system.

The actions of the utilities are aimed at preserving the long-term operation of the battery. However, this may cause the device to not fully charge.

To find built-in utilities, perform a number of operations:

Open the Task Manager using the key combination Ctrl+Alt+Delete.
A list of running programs will open in the window that appears.
Select "Uninstall software".
Find a program with an icon that differs from the standard one and delete it.

If the laptop has factory utilities, the battery charging icon usually differs from the regular system icon.

Checking the power supply

In a situation where the battery is connected and the computer is not receiving power, you need to test the power supply. This problem easy to diagnose.

To check you will need to take several steps:

Turn off the device.
Remove the unit from the socket.
Remove the battery and connect the plug.
Then connect the unit directly to the network.
Turn on the computer.

Contact oxidation and circuit failure

Often charging does not occur due to faults in the power supply and motherboard due to non-working electrical diagrams and power source.

Non-working equipment needs to be replaced when the battery contacts are oxidized. This involves carrying out repair work or purchasing new components. To fix the problem, it is advisable to contact a service center.

The battery does not fully charge to 100%

Laptop users experience full or incomplete charging of the device when the battery is connected but there is 0 charge available or the built-in indicator does not reach 95, 100%.

Battery status

First of all, you should test the performance and condition of the battery.

For this purpose, the Battery Care utility is used, which displays the necessary operating indicators: rated/maximum power, percentage of battery wear. Increasing wear data indicates a faulty battery.

Program diagnostics

The computer may not see the battery due to installed program consuming a large number of energy. As a result, the laptop quickly discharges without having time to replenish the wasted energy reserve.

Diagnostics of programs is carried out according to step-by-step instructions:

Open the Task Manager using the keyboard shortcut Ctrl+Alt+Delete.
Run an analysis of the processor's performance in relation to running applications.

Based on the results of computer diagnostics, determine which program is wasting an impressive amount of energy.

Replacement

Replacing the battery on a laptop is necessary when long-term charging, little time battery life (fast consumption energy reserve), strong heating of the power source; failure to turn on the device without access to the power supply.

It is important to follow a number of rules:

Contact a repair service.
Battery testing by a specialist.

If unsuitable, the part is repaired or replaced with a new component. Battery repair involves replacing used cells and battery parts. After assessing the operation of the device, specialists can suggest restoration of the element.

Why won't my new battery charge?

Users are often interested in the question of how to charge new battery, if he does not replenish energy.

In this situation, there are 2 possible causes of the problem:

manufacturing defects;
Incorrect battery initialization.

To resume charging, several steps are taken:

Shut down the device.
Disconnect the power source from the network.
Disconnect the removable battery.
Press the power button and hold for a couple of seconds.
Install the battery in its original place.
Connect the power supply to the socket-connector.
Start the laptop.

Another option to resolve the problem is to disable charger, remove the battery, hold down the power key. Afterwards you need to connect the battery, then the charger. Do not turn on the computer for 15 minutes, then start it in normal mode.

Brand Solutions

An affordable way to fix lack of charging in laptops of any brand:

Disconnect all connected devices.
To finish work.
Disconnect the power cord.
Remove the battery and set it aside.

After that, press the on/off button and hold for 30 seconds. Then return the battery to its place and turn on the computer.

Lenovo (Lenovo)

Also effective method restoring Lenovo work:

Shut down the device.
Remove the battery.
Reconnect the power supply.
Start your computer.
Call the "Task Manager" command.
Open the "Batteries" tab.
Delete the line “Battery with acpi compatible microsoft control”.

There are several such points with the battery; you need to remove them all.

Turn off the laptop.
Disconnect the power source.
Insert the battery and connect the unit to the network.
Turn on the computer and evaluate the result.

If accumulator battery connected, but not charging, then it is advisable to find a manager that controls the battery modes. The utility displays 2 modes: “ Optimal time work" and " Best term battery service." Select the first one - as a result, charging will resume.

HP

Step-by-step instructions for setting up equipment:

Make sure the indicator shows green.
Check the cable for damage and kinks.
Test the adapter alternating current using UEFI Hardware Diagnostic tests.

The last point includes a number of actions:

With the computer turned on, press the F2 key a couple of times;
in the diagnostic window that appears, select the “Component check” section;
find the “Power” line and select AC adapter test;
run check;
follow the instructions provided.

If the "Passed" confirmation is displayed, there is no need to change the adapter. After this, test the operation of the battery (section “Checking the power supply”).

MSI

On MSI laptop Charging not working on Windows 10 is a common problem. Often users make calibration standard software, but the operation is unsuccessful.

The solution to the problem is to update the “Add battery charging voltage protect function” firmware. After downloading and installing the update, it will be written on the monitor that until fully charged 1 hour 30 minutes left - 60 percent charged. The developers came up with this algorithm in order to prevent battery wear.

ASUS (ASUS)

If Asus computer(x551m and so on) charges only when turned off; the problem can be fixed by replacing the USB connector and the charge controller. However, if this method does not help, then reballing is required (the procedure for rolling the processor).

Reballing is performed in a specialized computer center. DIY repair will deteriorate the condition of microscopic circuits.

ACER

A common problem among users is when the charger turns on and off during games. To solve the problem you need to install energy saving mode work. By saving energy, the load on the device is reduced.

DELL

To troubleshoot the bl1830 battery on Dell laptop, make sure the power adapter and battery are working properly.

Signs faulty equipment are given in the table:

Options for solving the above problems:

Checking the operation of the power adapter.
Charging the battery in BIOS mode with the laptop turned off.
Running Dell ePSA/PSA diagnostic testing.
Battery capacity analysis.
BIOS update.
Running the battery troubleshooter.
Uninstalling and reinstalling the Microsoft ACPI battery driver.
Check to see if the battery can be replaced.

24.10.2018

It is impossible to imagine our modern life without a laptop computer, how convenient and necessary it has become. We can use it at any time and in any place convenient for us. But problems also happen when Acer laptop won't turn on. It all depends on the fact that it is thin, delicate and transportable, but careless actions will only harm it.

If you have no idea why he beeps and refuses to work from the battery or directly from the power source, then contact the gsmmoscow service center. Our technicians will quickly and efficiently fix all problems. Causes breakdowns, as our experience shows, in most cases appear due to improper use and negligent attitude. To begin with, you can, if you wish, try to determine for yourself Why laptop doesn't work. Check if you are using the original power adapter that came with your Acer. It is also necessary to remove additional USB devices and drives. Now try to turn it on again if laptop Acer is working properly, then these tips will help.

You tried, but still Laptop won't turn on? Then, most likely, it is faulty and you should contact the service for professional help.

Reasons why your Acer laptop won't turn on.

Firstly, you must treat the mini-computer with care, because shocks, strong bangs, falls, and moisture can seriously damage the parts and the Acer laptop may simply fail completely. As a result, after such manipulations, Laptop won't turn on.

So, the video chip fails, which naturally needs to be replaced.

If the laptop simply does not charge, then the problem may be in the power supply, which will become clear after checking.

The north and south bridges are also replaced when they do not work.

There is one more elementary problem in Acer– This is a broken power button, it needs to be repaired in order to continue using it.

Due to a broken power connector, you will not be able to use the device unless it is repaired.

The laptop does not turn on through the contact group of the connector, which may be damaged; to resume its operation, you need to contact specialists to have everything restored.

Problems can also arise from the motherboard, which could be damaged.

So what if the lights don't light up, nothing works, then you should listen to advice about professional help, diagnostics and have it checked as quickly as possible.

Acer laptop won't turn on? Want to know how long the repair will take?

Your Laptop turned off and won't turn on, you have tried all the measures, then visit a specialist to diagnose possible problems. The diagnosis takes approximately one hour. You will find out for free, for example, why indicators do not light up.

If you are interested in knowing how long the repair will take, then this information is for you. Each type of parts replacement is complicated in its own way, and so is repair. The presence of the required spare part and the complexity of the model play an important role. If your laptop stopped turning on due to a video chip malfunction, then its usual replacement takes about 4 hours. The board repair you need can be done in 2 hours. If the light doesn't light up, and you know that the reason is the power connector, then we will replace it in about an hour. IN Acer Aspire For example, replacing the south and north bridges lasts from 4 hours.

The professionals at the ZhSMMOSC center will bring your Acer laptop computer back to life efficiently and reliably.

Laptop, just like everything else computer technology, may fail, but if it also does not load, then this can really shake your nerves.

I would advise, first of all, to make sure correct connection and device installation:

Is the battery installed in the laptop correctly?
is it charged?
Is the power supply corrected, is the power cord functional.

If everything is normal, but the device does not want to turn on, it is necessary to analyze what previously carried out actions with it could have caused it to fail: and mechanical damage. If this has not happened, then you need to observe how the computer behaves when starting up and work according to the situation.

Possible problems and solutions.

Below, you can see all the main reasons why a laptop may not boot, and also diagnose your laptop yourself. I hope the tips below help you.

System reinstallation required.

The computer seemed to start up, the lights came on, a splash screen appeared on the screen, but when the Windows operating system loaded, the laptop froze and rebooted. This situation is the most common. If this is related to the software part, then it is not at all difficult to cure it, I advise immediately

This can be done either from a boot disk or from a flash drive. But an equally common cause of freezing is a hard drive failure. In this case, you will need to buy new hard drive and install it. It's not at all difficult to do this. (Read how to do this)

Problems with BIOS.

The laptop starts up, the indicators light up, but after 1-2 seconds the device turns off. This is where it most likely happened physical breakdown, in this case, reinstalling Windows will not help here. Such symptoms indicate that the BIOS firmware has not been completed correctly. You can’t handle this yourself; it’s best to contact a service center, where a specialist using a programmer can completely restore the BIOS. Naturally, you can try and restore the BIOS yourself, but in the center they will install latest firmware for the required model.

Laptop hardware cleaning is required.

If you are sure that boot program- not damaged, which means the problem is in the motherboard or the microcircuit on it. There are many reasons that can be cited here: incorrect connection faulty device via USB, processor overheating, short circuit in bridges or power circuits, etc. I would like to suggest conducting and, at the same time, inspecting all microcircuits for their operability

Hardware faults.

If the laptop is turned on, but the monitor does not turn on, you need to try connecting to regular TV. If everything works, then the matrix needs to be replaced. If, when you turn it on to the monitor or TV, no picture is shown, then you need

Blue screen of death.

On the device - blue screen and nothing starts? This blue color is called the death monitor Bsod.

Although the name is scary, there are also various medicines here, but the main thing here is to find out why this happened? You can find out more. On my own, I can add that 90% of problems that cause damage to a laptop appear only due to the user’s fault. Remember one thing: you can replace the main devices, replace thermal paste, and clean the laptop yourself, but if you are not confident in your abilities, then take your friend to a service center or call a technician at home (if possible) so as not to completely break the device.

More detailed article “Laptop won’t boot. What to do?" located In the video below, you can see how to correctly diagnose a laptop if it does not boot. Good luck!

If you press the power button and the laptop does not boot, then this can be called an unpleasant moment. Situations in in this case can be different: the laptop does not boot (black screen and the startup process does not happen at all), the laptop turns on, but does not boot, or it boots, but the screen is black, and what to do in such cases can only be decided experienced specialist. First, let's try to figure it out a little on our own. Firstly, the laptop may not turn on at all, to understand this, just listen and look to see if the power indicators light up. Secondly, the device may show “signs of life”, that is, the indicators will light up, the noise of the fan will be heard, but the screen will still remain black. There may be many reasons why a laptop behaves this way, but there is no need to panic right away, since it won’t take much time to solve them at the Serty Service computer repair center and, as a rule, the repairs or maintenance required when such a problem occurs is relatively inexpensive. Question: “The laptop won’t boot, what should I do?” - no longer a problem!

Reasons why you may be seeing a black screen on your laptop

Basically, if a laptop does not turn on or its screen does not light up, the reasons lie in its hardware and require diagnostics at a service center. However, if the laptop does not react at all to pressing the power button, you can try removing and inserting the battery, try turning on the laptop without a battery using only the power supply. You should also pay attention to whether the battery charging indicator lights up when the power supply is connected; perhaps it is the one that has failed, and the battery is completely discharged.

The most common problems that require repair under service conditions and lead to the screen not lighting up include:

For relatively old laptops with a gas-discharge backlight lamp, both the lamp itself and the inverter powering it may fail;
Failed internal power controller;
Failure of the cables supplying power to the lamp or LED matrix;
BIOS firmware failure;
Problems with other laptop components that can be called more serious and expensive to repair, for example, failure of RAM or video card.

You will also not be able to start the laptop normally if it is infected with viruses or the operating system crashes, but in this case you should still see the BIOS loading process on the screen, and the problem is most likely of a software nature. You can check this, for example, by trying to boot your laptop from a flash drive or optical disk, on which it is recorded special version a system designed to test a computer and gain access to the disk when the main system does not boot.

How to solve the problem of a black screen on a laptop

If you cannot turn on your laptop at all, and you have tried removing the battery, turning it on from the power supply, and also checking the integrity of the cords and contacts, there is only one solution to the problem - take the device to a service center.

If the laptop simply does not boot and a black screen appears even as the system boots, you can try checking it for viruses by booting from a special disk or try reinstalling the system. However, if you do not have experience in performing such restoration work, it will be easier and faster to solve the problem by contacting qualified Serty Service specialists.

Sometimes, when clients come to us for service, they say that laptop Acer Aspire 5560 stopped turning on And is not downloading, however, these are different situations and can mean different breakdowns. Windows cannot start, or there may be no initialization at all. Let's give an example: if the Acer Aspire 5560 laptop does not have mains power and the battery does not charge, this means various malfunctions, although these concepts are often confused. Let's identify the main laptop malfunctions and their symptoms.

Acer Aspire 5560 laptop won't turn on

The laptop does not respond to the pressed start key, i.e., the fan does not start spinning, the indicators do not light up. When the battery charge light is turned off, it may either light up or be turned off. This fact It is worth mentioning when describing the malfunction. There can be many reasons for this behavior:

broken firmware or missing BIOS firmware
, and the battery is faulty or removed. If, when you press the power button, the battery charge indicator lights up about 3 times, but the laptop does not start, these are symptoms of a low battery and lack of charging
the problem is internal power supply on the motherboard. There can be a bunch of variations here, short or battery, burnt out power chip, or standby mode
in a laptop or power supply
short circuit in the south or north bridges, for example due to a USB breakdown

No initialization

When there is no initialization, the following symptoms are meant: when you press the power button, the fan starts to rotate, hum, the fan starts to work and does not stop, it rotates constantly at high speeds, the power lights and the NumLock key come on, and so on, but do not go out, no further loading occurs. , the monitor does not light up. Options with indicators are possible, but the reaction of the cooler remains the same, no picture, no light on the hard drive indicator. This defect should not be confused with a missing image on the matrix. So, the reasons:

erased BIOS chip
no processor or RAM inserted

Reboot or shutdown during BIOS startup

Not to be confused with restarts when turning on Windows. Here it is difficult to clearly describe the behavior of the laptop, it is necessary, but the possible reasons are as follows:

Southbridge overheating, as a rule, due to a short circuit in it. Most often occurs due to a breakdown via USB
CPU overheating, due to a radiator grille clogged with dust or a loose fit of the radiator, this behavior is observed 1 time and 20 times, as a rule, accompanied by high fan speeds and usually different shutdown times
No power supply from the power supply, there is no contact on the power connector, the laptop tries to start from the battery, but since it is discharged, it immediately goes out
problems with bios

Can't boot from hard drive

Not to be confused with no Windows boot. Note that during this defect, unlike the previous ones, it is almost always possible to enter bios. Symptoms indicating this malfunction are also different. Anything is possible hang on bios splash screen, can constantly repeat attempts to start with network card, simply issue black screen with cursor or say that the disk is not a system one. In this case, the reason is: or. The first option is much more common, and there can be many reasons for the behavior of the hard drive: starting from problems with the connection connector, stuck heads, broken blocks, due to the fact that the disk is not formatted or is not partitioned. Naturally, the solution methods are also different.

Windows does not start, laptop restarts when system starts

Restarting is most often due to system damage, sometimes simply due to Windows failure. Often easier rearrange Windows than trying to fix it.

No image on LCD monitor on Acer Aspire 5560 laptop

Oddly enough, sometimes the problems are quite banal, and it’s impossible to call them problems with the matrix. But it is very often needed. The most common among them:

broke or sunk monitor off button when closing the top cover.
problem with inverter laptop screen
The backlight lamp is faulty
problems with video card, can be diagnosed by connecting external monitor, if possible. In case of breakdown, it is necessary.
the cables are faulty

No power from charging in Acer Aspire 5560 laptop

Such a breakdown may be a special case of a defect" laptop won't turn on". In this case, in the laptop Battery won't charge, But Acer Aspire 5560 laptop it may work, but from the battery, in this case, Windows will say this, the battery will gradually discharge. Causes:

problems with the power connector or charging the laptop
problems with the charge controller

Laptop Acer Aspire 5560 does not charge

Indicates that power is supplied from the network. The operating system displays the presence of power from the network, but the charge icon has disappeared. This defect does not mean that you necessarily have battery is broken, but this can also happen. Why could this happen:

battery is faulty
problems with indoor unit nutrition
lack of charging power

Does not start from a charging battery or the battery is not working

Here it is necessary to clearly understand that won't turn on on battery means that when there is no charger, the Acer Aspire 5560 laptop does not start, this cannot mean that the laptop runs for no more than 5 seconds, then turns off.

Most often the battery is broken, in this case the battery most often does not recharge
problem with the internal power supply

Software problems with Acer Aspire 5560 laptop

Based on the symptoms of laptop malfunctions, they can be divided into software, hardware and mixed. According to statistics software repair laptops are needed in 2 cases out of 10. Other cases are either only hardware damage to laptops, or software. Symptoms software faults- program freezes, various error messages appearing, viruses. The system and programs may not load at all, reboot, freeze, etc. In general, among software typical faults laptops - littered and Windows viruses. And in almost 90% of cases, the cause of software failures is the person himself. Visiting sites with suspicious content, launching suspicious files and programs, surfing the Internet without an antivirus and the absence of even minimal preventive work with the operating system - this is enough to short term the laptop is broken.

Correcting software problems involves treating viruses, restoring Windows functionality, or completely reinstalling it while preserving data.

Physical damage to the laptop

Hardware faults can be divided into two types - mechanical and electronic. Mechanical breakdowns laptop is physical damage caused by the user, such as spilled coffee, soda, water, liquids, alcoholic beverages, tea, etc., laptop falling from high, hitting the laptop, damage to the display or keyboard by foreign objects, damage to the power connector and broken wires of the external power supply.

Not to mention spilling water, which can burn anything in a laptop; most often in laptops, the monitor and keyboard buttons are damaged. The matrix is broken when the lid is turned unsuccessfully or when the lid is closed when there are foreign objects on the keyboard, for example, a mouse, keys, flash drives, pencils, pens. But the scourge of the keyboard is animals, or those trying to clean the keyboard at home.

The drive does not read cds

Failure of a laptop DVD can sometimes be corrected by cleaning the laser head, but most often it can be eliminated.

Blade of the south bridge, north bridge or video chip

Acer Aspire 5560 laptop screen failure

To avoid going to a service center, do not drink or place tea near your laptop. It is not recommended to eat while using a laptop. If the problem has already occurred, do not disassemble the case under any circumstances. This may result in liquid leakage onto the laptop boards or damage to the cable. Careful use will avoid problems with damage to the keyboard and individual buttons.

Sometimes there is such a problem that your laptop stops working and you cannot understand what is the reason. Well, this is quite unpleasant. Especially if your laptop serves as a workstation. In this article we will tell you what troubles could happen to your laptop.

Different problems may concern two areas: hardware And software. Hardware problems are when any part of the laptop fails. Software problems- these are problems that affect the software part of the system. For example, incorrect setting BIOS, OS or utilities.

First, you need to understand which area your problem falls into. For example, if your laptop won't even start, then the problem is definitely a hardware issue. However, if your unit can get to the BIOS or even before the operating system starts, then there is a possibility that the problem is of a software nature.

Here we need to perform a power test. Connect the power supply to the laptop and be sure to check your outlet. There should be a small diode on your device, which indicates that it is connected to the network or the battery is starting to charge.

It is possible that the problem lies in the power supply, damaged connectors or wires. Check this entire system thoroughly. In order to prevent various breakdowns, try to first power up the laptop and then plug it into a power outlet.

However, if you are convinced and sure that the problem is not in your power supply, then perhaps it is in the batteries. Reconnect the battery. You can also try turning it off external devices. After that, turn on your laptop and gradually turn on the disabled things. This will make it possible to determine what the problem is.

Loud noise from the cooler, but the screen shows no signs of life

There is a possibility that your monitor's backlight has simply stopped working. Try activating it with a key combination Fn+F2. If it doesn’t help, then you can add another monitor to the laptop. Using it, you can determine whether the problem is a non-working screen.

Another possible problem is the video card. Quite often we forget to do such basic things as cleaning our laptop. If you are a fairly inexperienced user and have only recently begun to get acquainted with such a thing as a laptop, then know that it needs to be cleaned regularly. Also be sure to monitor the temperature.

There are, of course, more serious problems. For example, problems with the central processor, RAM, BIOS, etc.

Starts up, displays a splash screen or displays a message and freezes

The root of this problem is most likely the BIOS, or more precisely, its settings. Try to set the settings to default. This function in different BIOSes it can be located in different places, but its name usually looks something like this - Load BIOS Defaults.

It is also possible that when loading the system you saw the message “Press F1 to continue”. This problem usually occurs when the battery sits on the motherboard (not main battery), is installed wrong time or the BIOS settings are lost. To change the battery, you must contact a service center.

Another problem may be with the hard drive. Define correct work Winchester perhaps by its sound. When starting up, the hard drive makes a couple of crackling noises, but when everything is not in order with it, there are many more crackling noises and everything freezes.

There is also a problem with RAM. If possible, disconnect the RAM and clean its contacts. If you have more than one strip, then try disabling one of them.

Constant reboots or shutdowns

Most likely this is a hardware problem. Most likely there is a short circuit that overheats the south bridge. In most cases, this occurs due to a breakdown via USB.

As mentioned above, cleaning your laptop is a must. Due to the high level of dust, your CPU can get really hot. In this case, you may hear a loud hum from the cooler and experience constant reboots.

Cannot start from boot disk

With this error, you may receive messages like ". Try removing the flash drive from the laptop, remove the disk from the drive and reboot. If this does not help, you can try reinstalling the operating system. Well, if this does not solve the problem, then you will have to take your “friend” to the service center.

Found a typo? Select the text and press Ctrl + Enter