Asus laptop safe mode. #3 System configuration

Youtube

Question from a user

Hello.

Tell me, I can’t log in safe mode on my HP laptop.

Windows 10 OS is installed. I tried the F8 button - it doesn’t work, I tried to create bootable USB flash drive- but the laptop does not start from it. Tell me, is there a 100% working method?

Michael.

Good day!

In general, in case of various problems with Windows, it is often necessary to load it into safe mode . For example, your OS has stopped loading, a black screen appears in front of you, a critical error has appeared, a driver conflict, etc.

But it’s not always possible to enter it (like the user who asked the question) - often the computer/laptop simply does not respond to your pressing the F8 button (previously this was the basic button for calling up the boot selection menu).

In this article I will look at several ways that you can enter safe mode in different versions Windows.

If Windows boots

Method number 1 - using msconfig

To change the download type - open system configuration : to do this, press the Win+R button combination, then in the line "Open" enter the command msconfig and press Enter.

Next, open the tab, and check the box next to the item "Safe mode" . By the way, please note that there are several boot options: minimal, another shell, with network support, etc.

Save the settings and restart your PC or laptop. Windows should start in safe mode. To get Windows to start booting again normal mode- use the reverse procedure (uncheck the box

The method also works in Windows 8 and Windows 10. Just hold Shift key and restart the computer using the button in the START menu (in Windows 8 - on the desktop).

Next, the computer will begin to reboot and a window should appear in front of you asking you to select one of the action options: in our case, select "Troubleshooting" , then in "Diagnostics" choose "Additional parameters"(see photo below).

Then you need to open the section .

And restart your computer.

Actually, after the reboot, you will be offered several options for safe mode: with loading of network drivers, with command line support. Selection buttons: F4, F5, F6.

Method number 3 - using F8 (for Windows 8)

In general, according to the developers of Windows 8 OS, you can enter safe mode using the same “old” key F8 (on parts of PCs/laptops - Sfift+F8 ). But the problem is that Windows 8 OS boots faster than older OSes. Because of this, the user simply does not have time to press the key in time.

Especially if you have a modern PC with an SSD drive and UEFI instead of BIOS. On older PCs with HDD and classic BIOS, you can press the F8 key, and this method works quite well!

If Windows won't boot

If, instead of the usual desktop, you see a black screen or the appearance of some critical errors, or the PC immediately freezes and becomes “dead” as soon as the desktop appears and you do not have time to activate another type of boot, then you need to have a bootable CD|DVD disk , or a USB flash drive.

If you don’t have a flash drive, I’ll provide a link to the current article just below. If your flash drive was not recorded ahead of time, and you do not have a second working PC, you will have to turn to a neighbor/friend for help ☻.

Large instructions for creation bootable flash drives For Windows installations XP, 7, 8, 10 (UEFI and Legacy) -

Next you need to boot from this media. To do this, you need to go in and configure the appropriate BIOS image, or call the BOOT menu (note: boot menu with media selection) . These topics are extensive and I will not dwell on them in this article; below I will provide links to my instructions.

How to enter BIOS on a computer/laptop -

Hotkeys for logging in BIOS menu, Boot Menu, recovery from a hidden partition -

How to configure the BIOS to boot from a flash drive or disk (CD/DVD/USB) -

Then follow the following path: Select action/Diagnostics/ Extra options/Command line .

Then you need to enter the command: bcdedit /set (default) safeboot minimal and press Enter. Then close command line and press "Continue". The computer should boot into safe mode - mission accomplished...

Note! If you need to boot Windows in Safe Mode with Networking ( Safe Mode with Networking) - use the command:
bcdedit /set (default) safeboot network

On Windows 7

Also relevant for Windows XP

In Windows 7, to open the menu with boot options - just after turning on the computer/laptop press several times in succession F8 key- until you see the additional options screen Windows boot(example below).

If the F8 key does not work for you, or for “unknown” reasons you still cannot log in, you can resort to one method. Wait until Windows starts loading and at this moment press the reboot button on the system unit - RESET (on laptops you need to hold down the power button for 5-10 seconds).

As a result, the PC will restart, and you will see the Safe Mode menu (it appears automatically). But in general, use this method to enter without. mode - not recommended (to avoid additional problems ☻).

On a laptop

In general, the laptop enters safe mode in the same way as described above (use the method depending on your Windows OS).

Asus laptops: the recommendations above are relevant (F8 or Shift+F8).

Acer laptops: everything above is relevant. True, there are some models (old) where there was a rather unusual method: Ctrl+F9.

Lenovo laptops : As a rule, when loading, just press the F8 button (for Windows 7). If you have Windows 8, 10 - use the option with the command msconfig.

HP laptops (entry into non-mode not from Windows environment)

If the options suggested above do not work, try the following:

Turn on the laptop;
Immediately press the Esc button until the startup menu opens;
Press the F11 key (system recovery begins);
Next, start Windows in safe mode (similar to method 2 at the beginning of this article).

Important!

Please note that on laptops function keys F1-F12 can be disabled in BIOS (or they can be used by simultaneously pressing the Fn key (F-key)) . It's about about HotKey Mode (and others like it). This is why sometimes on laptops it is impossible to enter safe mode in Windows 7 by pressing the F8 button.

Settings Laptop BIOS in pictures -

Thanks in advance for additions.

Best wishes!

While using laptops from different manufacturers Users often encounter various problems and errors. Safe Mode allows you to boot only necessary components or restore previous state systems. The article will discuss how to start a Lenovo laptop in safe mode.

How to enable safe mode?

On different operating systems, the process of entering the boot mode selection menu is different, so it would be appropriate to list all the methods.

Windows 7, XP.

When you turn on the Lenovo laptop system, you need to press the “F8” key. Next, a special menu should appear on the screen. You can select any of the proposed modes and start downloading.

Windows 8, 10.

When you turn on the system, you must press the “F8” button or use the “Shift + F8” combination. A menu will appear on the screen with a choice of download options. This option should be used only if there are problems with the computer and you cannot get to the desktop of your Lenovo laptop.

Another way is to use the msconfig utility. You need to go to its interface and select the “Download” tab. Next, in the “Download Options” field, you need to check the items “ Secure Boot" and "Minimum". After saving the changes to the settings, a window will appear prompting you to reboot. Lenovo laptop. It is worth noting that the system will always start in safe mode, so after fixing problems with the system, you must disable the option in msconfig.

On Windows 10, the F8 key method does not work. You need to use the msconfig utility.

Results

It is not difficult to enable safe mode on a laptop, so you can launch it at any time and try to fix errors in the device.

Experienced PC users know about such a Windows option as “Safe Mode”. It is necessary in modern operating systems, because the latter are by no means infallible. Mistakes happen, and sometimes it’s not possible to correct them in working order. With XP and 7 everything was more or less clear. But with version 10, everything has become much more complicated. The standard safe mode entry has been disabled. Now this is not so easy to do. It is unclear what caused this decision by the developers. But the fact is undeniable that the seventh version was much clearer than the newfangled “ten”. However, even in the times of XP they said so. So, most likely, users will get used to this “miracle”. So how to log in safely Windows mode 10? Let's talk to them about this.

What is "safe mode"?

Safe mode is a way to boot the system with only the most important drivers. That is, only those components that are necessary for minimal system functionality will be loaded. No additional codecs, flash or other unnecessary nonsense. This mode is used to correct operating system errors, return to early state using system restore. Also, some viruses can only be removed in this way. Therefore, everyone needs to know how to enter safe mode in Windows 10.

Sometimes this OS condition requires an "accounting" fix or a local conversion. Naturally, to carry out this procedure you need access to the Internet. And here the “Safe Mode with loading network drivers” option will help. Tens users need to choose this option, because to fix account It won't work without the Internet. And this brings us back to the question of how to enter safe mode

How to log in if the OS is starting?

Eat various options by loading "tens" in safe mode, if everything works fine. The simplest one is to click on “Shutdown” in “Start” while holding down “Shift”. You will then be prompted to select a download type. All you have to do is choose the one you need. Also try "returning" the mode launch when pressing F8. You just need to enter the required text in the commander line. How to enter Windows 10 safe mode via command line? More on this below.

There is another option. Enter "Options" and then - A lot of unnecessary text will appear with the available options. Among others, there will be the items “Restart the computer in safe mode” and “Restart the computer in safe mode with network driver support.” Select the one you need this moment, and reboot the PC or laptop.

You can try another procedure like this. Go to “Start”, select “Run”, enter “msconfig” (without quotes). A dialog will appear with a “Download” tab. Among a fair number of items there will be “Boot Options” and “Safe Mode” with a bunch of options. This is what needs to be ticked. And then just restart your PC.

Using the command line

Go to “Start”, select “Command Line” and enter the text in Commander: “bcdedit /set (default) bootmenupolicy legacy” (without quotes). Then reboot the machine and press F8. The Windows Start Options window will appear. Here we select "Safe Mode". Will they be needed? network drivers- decide for yourself. This is one of the answers to the question of how to enter safe mode

The most important decisions are usually made through the commander. various problems. But in the “ten” it is best to use Windows Power Shell - a console borrowed from the Linux OS family. This tool allows you to run commands as an administrator and is much faster than the standard commander. And it is clearer to those who have at least once used Ubuntu or Mint. The command line method works on any Microsoft operating system (except XP). The company from Redmond did something adequate. Honor and praise to her!

What to do if the OS does not start?

There is only one way here. There is no way to launch Windows in Safe Mode. Therefore, you need a flash drive with the Tens distribution kit. When loading the installer, you can pull off a trick with the commander and force Windows to boot from the HDD in safe mode. You just need to find the inscription “System Restore” in the installer’s welcome window. A commander will appear there, into which we enter the text we are already familiar with (without quotes). Now reboot your PC or laptop. This is one of the answers to the question of how to enter Windows 10 safe mode through BIOS.

Many people believe that if the operating system does not want to work, then the easiest way is to reinstall the OS. On the one hand, this is so - clean system always works faster. But on the other hand, frequent reinstallations operating system- certain death for hard drive. Not to mention the fact that there is a lot of time to kill full customization systems. This does not include the time required to install it. Therefore, it is easier to solve all problems that can be fixed using Safe Mode.

ASUS laptops

There are some nuances here. The fact is that ASUS laptops have a unique entrance to the boot menu (selecting media at boot). Before performing actions with the commander in the "tens" installer, you need to force the laptop to boot from the drive with the distribution kit. To do this, just hold Tab at startup and select desired type downloads. How to log into safe mode in Windows 10? ASUS is the same PC. That is, the method with the commander from the “tens” installer also works.

In general, Asus laptop manufacturers have their own concept of convenience and ergonomics. That is why the engineers deviated from the standard canons and assigned some crazy keys for low-level laptop control. Therefore, before trying to change the BIOS settings, you need to read the instructions very carefully. Otherwise, your “correct and standard” actions can lead to very sad consequences.

Acer laptops

The most problematic in this regard is the E5-731 laptop. In order to get into the boot menu of this laptop, you need to do a number of operations. First you need to press Enter to get into the laptop BIOS. Then go to the "Boot priority" tab and select our flash drive with the "tens" installer. Now be sure to reboot the device. The laptop will boot from the drive, not from the HDD. How to enter Windows 10 safe mode in Acer E5-731? Using the commander in the installer. Exactly the same as in the previous examples.

With the Acers, everything is somehow unclear. This method of getting to drives with distributions was used in ancient times. system units with processors from AMD and why manufacturers decided to choose this particular method is unknown. But in this situation, after manipulating the commander, you will have to return to the BIOS again and set the priority to starting from the HDD. And this is completely inconvenient.

Lenovo laptops

How to enter Windows 10 safe mode through the BIOS of Lenovo laptops? It's easiest here. When starting the device, just press the F12 button and the media selection menu will appear. Select the flash drive and boot. And then we proceed according to the already known scenario with the command line and the right command. Laptops from Lenovo are the simplest in this regard. Chinese company clearly knows a lot about ergonomics.

In general, Lenovo laptops are in no way inferior to more famous brands in terms of quality and layout of control elements. And in the case of Windows 10, they behave more adequately than other models. There is even an interesting option with Safe Mode for those who use UEFI. Just press Delete at startup and launch options will appear. Well, what's not to love?

Conclusion

Of course, entering safe mode in Windows 7 was much easier. But it’s also in the top ten. It’s just that the developers made it less accessible. But with the help certain commands or actions, it is quite possible to load the operating system in this mode. And after that, you can correct errors in drivers, the operating system itself and its components. The main thing is to do everything clearly according to the instructions. Then there will be no problems.

If none of the above methods helped fix system errors, that is, at least two ways. The first is to reinstall the entire operating system. This advice is not without common sense, since fresh Windows always works better and faster. If you don’t know how to install, or you don’t have free time, then there is only one way out - take your laptop or PC to a professional workshop. They will do everything quickly and painlessly. But it will cost money.

In Windows 7, there are two ways to get into safe mode:
1) Entering Windows 7 safe mode at system startup.
2) Entering Safe Mode from the Windows 7 environment (from a running OS by changing the boot in System Configuration).

Entering Windows7 safe mode at system startup.

Turn on the computer and while the system is loading, press the F8 key several times; if the welcome window appears (Windows 7 logo), it means you did not have time to press the F8 key, in this case you need to wait for the system to boot and turn off the computer again and when loading, press again F8 key. When trying to get into safe mode, you need to consider:
- On some keyboards, the function keys F1–F12 are always disabled by default. To turn them on, you need to press special key(usually Fn) and while holding it press the F8 key.
- If your computer has two or more operating systems, use the arrow keys to select the one you want, then press Enter key.
- To use the arrow keys on numeric keypad Num Lock mode must be disabled.
In the window Additional options downloads select " Safe mode" and press the key " Enter».

After a few seconds, the system will boot into safe mode.

Entering Safe Mode from Windows 7.

Press the button " Start" and write in the search bar msconfig and press the " Enter»

In the window that opens system configuration, go to the “” tab and check the “ Safe mode" and select " Minimum».
For reference:
Safe Mode: Minimum- Loading GUI Windows OS user ( Windows Explorer) in safe mode with only the most important running system services. Network components disabled.
Safe Mode: Another Shell- Boot Windows command line in safe mode, running only the most important system services. Network components and GUI are disabled.
Safe Mode: Recovery Active Directory - Loading GUI Windows user in safe mode with only the most important system services and services running Active directories Directory.
Safe Mode: Network- Boots the Windows GUI in safe mode, running only the most important system services. Network components are enabled.
Without GUI - While loading Windows screen no greeting is displayed.
Download log - All information regarding the boot process is saved in the file %SystemRoot%Ntbtlog.txt.
Basic video- Boots Windows GUI in minimal VGA mode. In this mode they load standard drivers VGA instead of display drivers that match your computer's video hardware.
OS information - Displays the names of loaded drivers during system boot.
Make these boot options permanent - Changes made to system settings are not tracked. You can change the settings later using System Setup, but only manually. If this option is selected, you will not be able to roll back changes by selecting Normal Startup on the General tab.

After this, you will be prompted to restart your computer to enter Windows 7 safe mode. If you want to boot into safe mode now, click "", if you want to do this later, select " Exit without reboot"And the next time you reboot or turn on your computer/laptop, automatically boot into safe mode.

The next time you boot Windows 7, the system will boot into Safe Mode.

In order not to boot into safe mode, you need to go into the system configuration again and uncheck the previously checked boxes.

Being a special type of computer diagnostics, safe mode involves starting the operating system with the exclusion of virtually all unnecessary components. This mode very common during recovery user computer after the occurrence of certain breakdowns and malfunctions of various nature. Problems with the system occur quite often, so proper knowledge of the procedure for starting safe mode will be a significant advantage for the computer owner.

How to start Windows 7 safe mode

There are two commonly used options for opening safe mode in Windows 7. The first involves logging in during system startup, the second is enabled while it is running. The first option will work even in cases of serious computer malfunctions, because the need for full loading There is no OS, the user enters safe mode and carries out the required repair and recovery operations. Required condition The second option will be a running and active OS, so this method is not applicable in all situations, let’s look at how to start Windows 7 safe mode:

When the computer is turned on, you should restart it (if the PC is turned off, you need to turn it on).
Before the operating system starts, data about BIOS version, it is at this moment that you need to press the F8 key several times (pressing more than two or three times is recommended).
A screen will open with a window for selecting additional OS boot options.
Using the arrow keys, select the “Safe Mode” section and press the “Enter” button.

When, instead of a special window with a choice of system startup options, the message “Windows 7” appears, indicating a normal OS boot, the user should try to enter security mode again. It should be noted that the F1-F12 keys may have been disabled previously, in which case the F8 button should be pressed while holding the Fn key (often happens on laptops).

Consider the option of launching during the active OS environment:

With the OS running, press the key combination “Win+R” and enter the query “msconfig”.

The above settings will present the user with an interface in which it will be prompted to restart the PC. The computer owner can enter safe mode by clicking “Restart”. If you select “Exit without rebooting,” the required mode will be entered after turning off/on the PC or after its first restart.

1. Features of Windows 10, how to enter safe mode?

The innovative modification of Windows 10 did not include the outdated method of opening safe mode by using the F8 key. There are three ways to activate it, the first pair of which are used during OS boot. The latter option involves the system refusing to start in the user’s usual operating mode.

Starting safe mode using the "msconfig" configuration:

Safe mode can also be started using the command line:

If your PC refuses to boot, you can activate safe mode as follows:

You must have a boot disk or flash drive with Windows 10.
Download from of this disk or flash drives, choose required language interface and other parameters.
In the window that appears, which will prompt you to install the OS, you need to press the “System Restore” button located at the bottom of the window.
Go to the “Diagnostics” section and in the “Advanced options” subsection, launch the command line.
In the window that opens, enter “bcdedit /set (globalsettings) advancedoptions true.”
Wait for a message that the operation was successful and deactivate the command line, then click “Continue”.
After rebooting the PC, a menu will be displayed with available modes work, select “Safe Mode”. (It can be disabled using the command “bcdedit /deletevalue (globalsettings)advancedoptions”).

2. Windows 8, how to enter safe mode in order to correctly troubleshoot problems?

Specifics Windows interface 8, suggests a method that is not the most common for launching safe mode compared to other systems. Let's look at the main options for entering this mode.

The first option is to enter using the F8 button.

However similar method may not work on all modifications of computers, its sequence is as follows:

How to start Windows 8 safe mode by changing boot options?

The method is considered quite effective; the following series of actions are used to implement it:

Press the “Win+R” key combination and enter the “msconfig” command.
Go to the section called "Download". In the “Boot Options” item, check the box next to “Safe Mode”.
Place the selector next to the “Minimum” entry, and then click “OK.”
A window opens in which the user needs to confirm restarting the OS.
After rebooting, Safe Mode will become active. After solving and troubleshooting, it is important to uncheck the previously selected “Safe Mode” option in the boot settings.

Another common way to activate Safe Mode in Windows 8 involves the following steps:

Using bootable media.

Of course, including the possibility of a complete failure of the operating system, there is the option of entering safe mode using boot disk or flash drives:

Insert the bootable USB flash drive into the PC and run from it.
Select date, time and other parameters.
In the installation window that appears, click on “System Restore”.
Go to “Diagnostics” and select the section called “Advanced Settings”.
In the “Command Prompt” section, enter the task “bcdedit /set (globalsettings) advancedoptions true”, then press “Enter”.
Close the Command Prompt, and then click Continue.
After rebooting the OS, press the F4 button in the window that opens.
Login in safe mode. To window with possible options system startup did not appear after each subsequent shutdown/on or restart of the PC, you must enter the following into the command line: “bcdedit /deletevalue (globalsettings) advancedoptions”.

3. How to enter safe mode in Windows XP?

Considering the version of Windows XP, which is outdated but still relevant for many users, let’s consider the process of launching safe mode on it:

How to start Windows XP safe mode from the system? In some cases, this option may be an alternative to the above. Consider the sequence: