Non-standard ways to turn off iPhone. Activating Assistive Touch

Facebook

At least once, but every iPhone owner or any other iOS device encountered software glitches when the device stops responding to touching the screen and pressing mechanical buttons controls (Home and Power). What to do if iPhone freezes and refuses to obey basic commands? In today's instructions we will introduce you, dear readers, to 3 methods how to restart iPhone from any condition.

To begin with, let's assume that your iPhone is running in normal mode, he responds correctly to touch touch screen, obediently responds to commands using the “Home” and “Power” buttons and you need to restart the iPhone in normal mode.

How to restart iPhone in normal mode?

Press and hold the button turn off iPhone (aka “Power”) until the large “” buttons appear Turn off" and "Cancel";

Touch iPhone screen on the left side of the red button " Turn off» (slide to power off) and, without lifting your finger from the surface of the screen, swipe the button to its right border. This gesture is called " Swipe"(from the English Swipe - to carry out without taking it off). The iPhone will begin to turn off.
Wait until the device screen goes completely dark and briefly press the “Power” button. The company logo will appear on the display Apple and the iPhone will start booting normally.

Force restart iPhone

Depending on the model, the method forced reboot will vary.

All iPhones released before iPhone 7

For iPhone 6, 6 plus, 6s, 6s plus, 5, 5S, 5C, SE, 4S and all previously released ones, you need to press the Home and Power button:

Press and hold the Home and Power buttons at the same time for 10 Seconds(approximately). iPhone display will go out completely.

Release both buttons. If after this the screen does not appear Apple logo, briefly press the power button. The iPhone will start booting normally.

iPhone 7 and later

On iPhones that were released after the iPhone 7, the Home button was made touch-sensitive. If the iOS operating system is frozen, then it will not respond to pressing the sensor. They made another way to perform an emergency reboot:

Press the Power button and Volume Down button at the same time. Don't let go and hold for about 6 seconds.

The iPhone will reboot. The Apple logo will appear. Then it will boot normally

The method allows you to force restart your iPhone or iPad when a software glitch occurs. We advise you to use this procedure in case of emergency, and if you can get by with the remaining 2 methods, use them. Leave this one as a last resort.

Third and final method reboot iPhone effective only when normal operation iOS device when touchscreen responds to touch and the device performs the necessary operations, but the power button is damaged or not working.

How to reboot iPhone without a button?

Manage mobile devices from Apple and iPhone in particular, Can And without mechanical control buttons. The creators took into account, although high, but still limited resource mechanical controls and in case the touch display of your iPhone has outlived the control buttons, the operations for which the “mechanics” were responsible can be performed using gestures.

To activate full control iPhone using touch, you need to enable the " Assistive Touch«. This function allows you to flexibly configure device control using gestures and completely replaces mechanical control buttons.

Activating Assistive Touch

Go to Settings -> Basic -> Universal access ;

Scroll to the bottom of the Accessibility Settings page and under Interaction select paragraph " Assistive Touch«;

In the next settings window, move the activation slider opposite “ Assistive Touch" to position " Included"(colored in green color). A translucent button will appear on the iPhone screen.

Touch the iPhone touch screen within this button (this gesture is called “Tap”). A window will appear on the screen with available opportunities Assistive Touch.

Video instruction “How to enable Assistive Touch in iOS”

Turn off iPhone using Assistive Touch

As part of this instruction, we will get acquainted with the method of turning off an iOS device without using the “Power” button using the Assistive Touch function.

« Tap" on icon menu Assistive Touch;

In the menu for this function " tap» by icon « Apparatus", and then long tap(touch the screen of the device and do not lift your finger) by " Screen lock» wait for the buttons to appear « Switch off" and "Cancel";

And then everything is the same as when turning off the iPhone in normal mode, do “ swipe right» by the button « Switch off". The device will begin to turn off;
How same him then turn on if the shutdown button is faulty? Just connect iPhone to computer using USB cable and it will turn on in normal mode.

Video instruction “How to restart an iPhone without a button”

A few words in conclusion

The methods described above allow you to completely turn off or restart your iPhone or iPad from any state, in normal mode, if the iPhone is frozen or the Power button is faulty. Last method using the Assistive Touch function allows you to configure the control of your iOS device with maximum flexibility using gestures, with one “BUT”, Touchpad should be in good working order and the device should function in normal mode; Assistive Touch does not work on a frozen iPhone.

If you, dear users, have any questions or difficulties in controlling or setting up your touch iPhone control or iPad, contact us in the comments and we will try to help you as quickly as possible. Are you using Assistive Touch? And How?

All fans of Apple products are well aware of how to manage popular gadgets. IN normal situation the user holds down the Sleep button, waits for the red slider to appear, and turns off the mobile device. But how to turn off your iPhone if something goes wrong?

If the display mobile device refuses to respond to user actions, you need to find out how to turn off iPhone 5 without a sensor. Fortunately, this is quite possible and does not require significant effort. The best way out of the situation would be a forced reboot.

This operation is possible even when the buttons do not respond to normal pressing. It is absolutely safe and does not lead to an attack negative consequences. A forced reboot will in no way harm the gadget and will not entail deleting user content from the device’s memory.

Place your fingers on each of the two buttons - Home and Sleep.
Press them and hold them for 10 or 15 seconds.
Wait for the company logo to appear.
When the device restarts, you can turn off your iPhone as usual.

How to turn off iPhone 4, 5 and 6 if the screen does not work?

If the power button does not work, you can turn off the iPhone either yourself or with the help of specially trained persons. To take the steps necessary in such a situation, you will need Personal Computer or laptop. In the event that you do not have the ability to use a personal device or do not risk acting on your own, and it was not possible to solve the problem using the above instructions, you can contact the following places.

You have the right to visit any retail outlet that is part of the AppleStore network. Retail store employees can tell you how to turn off your iPhone 6 if the screen isn't working and other controls aren't responding to your touch. In addition, they will be able to illustrate each step by performing hands-on activities.
Another possible variant– this is a visit to the manufacturer’s service representative. To find out the location of the location closest to you, you should visit locate.apple.com and select the “Service” section. An interactive search will allow you to find an authorized representative and disable your iPhone using their services.

How to turn off iPhone if the power button does not work?

Now we move on to the option that assumes independent use technical means And software. After completing all the steps described at the beginning of the article, you may encounter that the device continues to freeze. If a forced reboot does not solve the user's problem, a more time-consuming method must be used.

Connect your iPhone to your computer using a USB cable.
Launch iTunes.
Reboot your mobile device in forced mode.
When the Apple logo appears, continue to hold the buttons.
Wait for recovery mode to activate.
You will see a notification on your computer screen prompting you to update or restore your system software. Click the "Update" button.
iTunes will then reinstall iOS and you can turn off your iPhone.

Every owner of a smartphone or other iOS device, at least once, has encountered a device failure when it does not respond to touch. On iPhone work 5 can be influenced by many different factors, but in most cases the problem can be solved by simply restarting the smart device.

How to turn off iPhone 5 if it's frozen

In a situation where the sensor is working, to bring the smartphone to life, it must be turned off. To do this, you need to hold down the lock, then slide your finger across the screen to confirm the action. It happens that the sensor freezes. To simply turn off the device, you need to simultaneously press both the power and “Home” buttons for 3-4 seconds, after which the iPhone 5 will turn off without restarting. To turn on the device, you must press the phone lock again.

Sometimes problems occur not only with the sensor, but also the keys stop responding to commands. How to restart iPhone 5 or turn it off completely if neither one nor the other works? In this situation, there is only one thing left to do - wait. complete discharge device When the phone turns off on its own, you should immediately connect it to charger, and then turn it on again. If the proposed methods did not help, and the iPhone 5 does not turn off, then take the device to service center.

How to restart iPhone 5

After purchasing a long-awaited device, the owners enjoy the opportunity to work for a long time smart device using multiple applications and programs simultaneously. But nothing is perfect, so when the moment comes that the phone cannot cope with numerous commands, the user begins to panic. Don’t despair and look for the nearest service center to ask how to force restart your iPhone. Try to solve the problem yourself in several ways.

Normal reboot of iPhone 5 using a button combination

Sometimes, to bring the device back to life, you need to restart it. How to restart an iPhone 5 that is functioning normally?

hold down “Power” until the “Cancel” and “Turn Off” commands appear;
touch the screen in the left border of the “Turn off” key;
Without looking up from the sensor surface, move your finger to its right side;
wait complete shutdown device, then briefly press “Power”;
the display will show the Apple logo and then start a new iPhone download 5.

Force reboot

How to completely restart an iPhone if the sensor is not responding? To do this, simultaneously hold down the “Home” and power keys for 5-7 seconds. The display will go dark. Then release the mechanical control. When the manufacturer's logo (apple) appears on the screen, briefly press “Power”. The phone should start working normally. Remember that the last option is forced restart iPhone 5, which can lead to a software failure. Use this procedure only in the most extreme cases.

Sometimes disassembling the case helps bring your smartphone back to life. This can be done using a screwdriver, which should be used to unscrew the mounting bolts at the bottom of the mobile phone. The goal is the battery, which needs to be removed and then put back in again. This method is suitable for phones that have already expired guarantee period. If the warranty is still valid, you cannot open the case yourself.

How to restart iPhone without lock button

All of the above methods are carried out using mechanical control. However, if a mechanical breakdown occurs, how to restart or how to turn on the iPhone without the lock button? The creators of the iPhone 5 took into account the limited resource of mechanical control, so when the sensor is working, it is quite possible to control the smartphone. How to restart iPhone 5 without locking? To activate phone control without mechanics, you must enable the Assistive Touch function. It allows you to customize device control using gestures.

Soft reset It doesn’t justify itself, because you can’t use a smartphone for a long time without proper controls. If you know the answer to how to restart an iPhone without top button or with a black screen, you can do this several times, and then you still have to contact the service center. Specialists will open the device, replace the lock/power key, reassemble it and return it in working condition.

How to use Assistive Touch

This function can be used not only by phone owners who are interested in how to reboot iPhone 5 without mechanical control, but also by people with disabilities. If a person finds it difficult to use mechanics or standard gestures, but it is more convenient to press in a certain place on the screen, he can activate Assistive Touch:

go to the options “Settings” - “General” - “Universal access”;
activate “Assistive Touch” by moving the slider to the “Enable” position;
click the one that appears software option;
select the “Device” function, go to key management;
in the menu, press and hold “Screen lock”;
By analogy with a simple restart, move the “Turn off” button to the right;
if the device requires a password, enter it;
To turn on a smartphone with a faulty lock, you need to connect it with a USB cable to the computer.

Video: how to restart an iPhone

Of course, the American company Apple designs, manufactures and markets mobile phones excellent devices that justify their cost due to the appropriate technical characteristics and optimized operating system. It is only due to its devices that the company can be said to stand out from its competitors. However, these devices do not last forever. And any device can suddenly fail, and then work as if nothing had happened.

One of the most pressing questions asked by users on many forums dedicated to the works of the “bitten apple” was the question of how to turn off the iPhone if the button does not work.

Causes and consequences

Many users who ask if a button does not work do not even try to first understand what the causes of the malfunction are. And almost all owners of devices running operating systems face this problem. iOS systems. Sooner or later, but this, unfortunately, happens in the life of each of the devices. The “Power” button (as well as the “Home” key) fails as a result of a software failure and stops responding to basic commands dictated, if you can call it that, by the user.

Currently, through joint efforts, we have been able to develop three methods that will help restart your device if a similar problem occurs.

Method 1: When the device is working stably

Let's assume that the device is working stably. This is the most simple situation, which may be. Everything reacts stably, touches are perceived, commands programmed on the “Power” button are executed. At the same time, there are no problems with the operation of the “Home” key. So, just hold down the first indicated button and wait for the words “Turn off” or “Cancel” to appear. Next, touch the left side of the strip called “Turn off” (it is colored red). Then, without lifting your finger from the screen, we swipe across the screen. After the strip is removed, the device itself will turn off and its screen will go dark. Press and hold the power button again for a few moments. You will be able to notice the company logo, after which your device will continue to boot as normal. Now let's look at the question of how to turn off an iPhone if the button doesn't work.

Method 2: The software crashed

How to turn off an iPhone if the button does not work? In this case, you will have to use the so-called forced reboot method. In this case, the device may not respond at all to touches on the sensor, and not just to commands sent through soft keys. To force reboot your device, you will need to simultaneously press power and main screen. We keep them in active state within ten seconds. The device will turn off. After this, release the keys. If the logo does not appear immediately, then proceed according to the second part of the previous method, that is, press the key again. It should be noted that this method should be left as a last resort and under no circumstances should it be used regularly.

Now you know how to turn off an iPhone without a button, although this method is only suitable for emergency cases when the software malfunctions.

Method 3: special programs

Users who ask what to do if the iPhone button does not work are unlikely to realize the existence special programs, which will be very useful for the device as a whole. They make it possible to control devices without mechanical keys. The creators of the program understood better than anyone that the resources of buttons are large, but not unlimited. Actually, this led to the creation of software. One example of this is the Assistive Touch function. Activating it will automatically give full access To touch control iPhone. The function allows you to very, very subtly, one might say, flexibly configure gesture control.

Thus, soon (after you get used to the new principles) you will abandon mechanical elements in favor of sensory methods of manipulation.