Can't see the iPhone network. Network disappears on iPhone

Twitter

So, today we will try to figure out why the iPhone does not connect to the network. The thing is that this problem is not so rare. And users are very interested in its solution. In fact, everything is not so serious and scary. Often you can solve the problem yourself without outside help. What options are available in our case?

Network failure

If the iPhone 4 does not receive the network (like any other gadget), it is likely that the reason for this was a problem with the cellular operator. That is, it is he who is experiencing a failure. Accordingly, all subscribers will not be able to use the connection.

Fortunately, this is a temporary phenomenon. As soon as the operator corrects the problems, the connection will be restored. You can either wait a little or use a SIM card from another company.

SIM card malfunction

Is your iPhone not connecting to the network? There are a lot of options for the development of events. The next point that should not be overlooked is the malfunction of the SIM card. This kind of problem rarely occurs, but it does happen.

Remove the SIM card from the device, then insert it into another gadget. Still no network? Then all you have to do is change the SIM card. After all, it is precisely this that is the main source of our current problem. It’s not a very serious phenomenon, but detecting it can be problematic. SIM cards rarely become inoperative, and it is difficult to think that this particular problem happened to you.

On this possible options developments do not end there. So, the iPhone can't connect to the network? What to do in this situation?

date and time

For example, make sure that the date on the device is correct. Don't forget about time either! It's hard to imagine, but modern gadgets Communication problems can arise for incredible reasons.

It turned out that the date is not true? Then change it yourself in the settings to the one that takes place on this moment. Of course, set the clock to the required value too. Sometimes it is better to do this using a Wi-Fi network and synchronization.

As practice shows, most often this is what helps solve the problem of the iPhone not picking up the network. Therefore, before sounding the alarm, it is necessary to first exclude this problem. After all, otherwise you may never find out what the matter really is.

Location

iPhone 4 can't connect to the network? This phenomenon is often observed not only among the owners of this gadget. People with regular smartphones sometimes also complain about constant search network device. What could be causing this?

For example, your location. Remember, the connection itself is not caught everywhere. And that's why she can disappear. If you are in the subway, elevator or underground parking, no matter how hard you try, you will not be able to make a call. Only in rare cases. Also, the device is not capable of catching a network in the forest and places remote from civilization.

So, the iPhone does not connect to the network. What should I do to correct the situation? You can simply change your location. Move to an area where the net usually catches well. You'll have to wait a few minutes. Look at the result - did everything work out? If not, you need to look for the reason elsewhere. If so, then be more careful about where you are. Mobile communications are not available everywhere.

Blocking by card

iPhone is a device that requires special rules to be followed when using it. Therefore, you should not be surprised at some network failures. It is likely that you still have factory settings. And the smartphone is initially locked to one SIM card, and the mobile device will only work with SIM cards from one specific operator.

This means that if you receive a message from your iPhone 5: “No network,” it’s time for you to change the factory settings. It is advisable to use the appropriate service at service centers for this. Otherwise, you can turn your iPhone into a non-functional gadget. After collecting the factory settings, as a rule, the network appears. Moreover, you will be able to work with all operators mobile communications no problem.

Viruses

On your iPhone search does the network happen all the time? Try to analyze your previous actions. If the connection previously worked normally, but then suddenly began to malfunction, it means that something went wrong.

For example, your device was infected with viruses. This is also a common case that is not often taken into account by users. Infection of any system disables the gadget. And on an iPhone this can be expressed through a complete loss of the network or its constant failures.

Of course, to correct the situation, it is necessary to treat the device. This can be done independently using special antiviruses. You can also go to service centers for help. In any case, if you cure the gadget, it will start working at full capacity without interruption.

Gadget malfunction

iPhone can't connect to the network? If you have considered all the possible scenarios, all that remains is to complain about the malfunction of the device. Lack of network can occur like regular smartphones, and for fakes. All that remains is to exchange the iPhone for a new one. Or send it in for repair. Fortunately, the described iPhone malfunction is not as common as it seems.

We hope you now understand all the common causes of our problem today. Try not to panic if the network on your iPhone is lost. In order not to spend a long time looking for the cause of this phenomenon, you can immediately take the gadget to service center. This will help in as soon as possible restore the functionality of the smartphone.

If you are faced with a problem where there is no network on your iPhone 6, we know how to help in this situation! Apple technology has long been famous for its products, but, unfortunately, no matter how branded the equipment is, it is also prone to malfunctions, often due to the fault of the owner of the device. Quite often, users contact us who have problems with the network on iPhone 6. We know why this happens and we know how to fix this problem.

Instructions: There are several reasons for network problems on the iPhone 6, and accordingly there are several different options its elimination. Below we will look at the main reasons.

The antenna is faulty. If so, it needs to be replaced.
Perhaps the radio path (a number of microcircuits) has failed. This part may break due to voltage surges or mechanical damage.
Also, it is worth paying attention to the transmitter power amplifier. If it fails, we can replace it.
It is possible that the modem processor (chip) has failed; replacing it will solve the problem.
Often the problem is caused by a faulty range switch.
A problem with the board may cause network problems.

Result: If the first option can be done independently, at home, then the 2nd, 3rd, 4th, 5th or 6th options, without a specialist, are unlikely to be successfully resolved.

We offer you two main options for solving this problem, the choice is yours.

Repair in service Apple Center Telemama

DIY repair

Our advantages

We use only original spare parts from the manufacturer.
Price. We buy all the spare parts that we use in our work directly, from factories, and wholesale. As a result, this gives us the opportunity to set the lowest possible markups and tariffs.
Time for repairs. For replacing displays, speakers, connectors, etc. we will need approximately 20 minutes. If diagnostics are needed, it will take an additional 20 minutes to carry it out.
A 1 year warranty is provided for any type of service.

If the iPhone 6 has completely or partially lost its functionality due to the network being lost, we know what needs to be done to get the device working smoothly again. The problem with the network on the iPhone 6 is in the category of complex ones, so we recommend that you do not try to fix the device yourself, but contact a specialist. Our Telemama service center employees are always ready to help you. If you are unable to come to us, we offer courier services for your convenience.

In our service center, diagnostics of any equipment are carried out completely free of charge. After the full list of repairs and their cost is announced to the client, our engineers begin repairing the device. We are confident in the excellent results of our work, since in the work process we use exclusively original components. We confirm each result of our work by issuing a guarantee valid for 1 year.

You can pick up the repaired gadget in person or ask our courier to do so. In any case, the repaired device will be under warranty for another year. After your first service with us, you and your friends will be able to receive discounts in the future. To do this, you need to provide the number of your previous order.

Our service center specializes in repairs mobile technology, we have many years of experience, so we know what to do if this or that problem occurs.

In the shortest possible time, your phone will once again delight you with its functionality. Our prices for Repair iPhone 6 you will definitely like, all of them are listed in the price list.

In order for the iPhone 6 to work properly, it is worth diagnosing it from time to time; using this procedure, you can prevent the occurrence of malfunctions. We carry out diagnostics free of charge.

Our regular customers are served with special discounts. Our service center constantly holds various promotions, thanks to which you can repair your gadget at cost. Take advantage of our services - you won't regret it!

In use iPhone gadgets there are some nuances, so if you are faced with the fact that the phone does not find the operator’s signal, do not panic - this can happen to anyone. There are many reasons why the iPhone does not see the network, they relate to the device settings or external faults. Let's look at why problems occur and what you need to do to fix them.

The problem with communication on iPhone is not isolated, but there are quick solutions

First of all, just try to reboot the device - perhaps there was a slight glitch in the system.

If this does not help, turn to the iPhone settings. Why is there no connection with the operator? In most cases, the problem with finding a network occurs due to incorrect settings time zone and time. To check this, follow these steps:

Go to the settings menu and turn on Wi-Fi.
Return to main settings, select the Date and time menu.
Here you will see the line “Automatic” - this function allows the device to independently determine the time zone and time. Place the button in active position or, if the line is enabled, turn it off and then on again.
Wait about a minute, restart your phone.

Sometimes the device does not receive a signal due to the fact that the operator does not provide its services in a certain region. To check if this is actually the case, go to the menu with operating modes and select the “Airplane mode” option - turn it on, wait a few seconds. Then turn it off - after these steps the network will reboot, after which the iPhone will search for a signal.

If there are no changes, let's check your provider's settings. To do this you need to do the following:

Open your iPhone's settings, Operator.
Make sure it is installed automatic detection settings.

Search for updates

Your iPhone may not receive a signal because you haven't set Latest updates for the system - they are necessary for correct operation gadget. Go to the “About this device” item if you see that there are new ones for iPhone system files, connect to the Internet and start the update process.

Note. If for one reason or another you are unable to connect to the Internet from your phone, connect it to your computer, go to iTunes, search for updates and install them.

Malfunctions after factory unlocking

Why is there no network after activating my iPhone? If after factory unlocking the device does not receive a signal, this means that it sees the card itself, you just need to fix the problem in the parameters.

To do this, reset the settings - insert the SIM card, go to Basic settings, Reset and select the “Reset network settings” option.

Problems with finding a signal arise when the iPhone is activated using the SAMPrefs or Redsnow programs. If the unlocking was successful, but there is still no connection, you need to reset the smartphone settings, which is done in the following way:

Insert the SIM card and connect it to your computer, open iTunes.
Make a backup, then click on the restore option.
After the restoration is complete, you will be asked to restore your iPhone from an existing backup or recognize it as a new device - select the second option.
After the activation procedure, the phone will search for a network and connect to it.

Note. If the iPhone is still programmed to work with AT&T, it will not pick up the signal from Russian providers in any case. It is necessary to unlock using the IMEI number - for this it is best to contact a specialist.

Other reasons for lack of network

The iPhone may not receive a signal due to external problems with a card or the mobile equipment itself. This happens in the following cases:

If the SIM card was cut incorrectly, the phone may not recognize it correctly - contact your service provider directly and order correct map for iPhone.
IN mobile device There are problems with the antenna - in such a situation, you need to contact a specialist and have the device repaired.

If you insert another SIM card and it catches the network, the problem concerns a specific operator - it has blocked the card you want to use. This happens for the following reasons:

The connection is inactive because you do not have funds in your account or you have not met other conditions for the provision of communication services.
The card is blocked using the IMEY code. In this case, contact the service center to activate it.

There are situations when the iPhone stops seeing the cellular network. In some cases, you can determine the cause and fix the problem yourself, without the help of specialists.

Network problems

It happens that after reinstallation, reset or update iOS device begins to catch the net poorly or stops doing so completely. A similar problem appears not only due to breakdowns in the system part, but also due to faults in the physical component of the phone. Problems with the network will be indicated by a message on the left top corner notification panel - “No network” or No Service.

In the upper right corner of the screen you can see a message stating that there is no network

If the problem lies in the system part of the iPhone, then most likely you can fix it yourself, but if the SIM card itself or one of the parts responsible for communication is damaged, you will have to contact special services for repairing Apple equipment.

How to fix the problem

First of all, you need to make sure that where you are, other devices with SIM cards from the same mobile operator are receiving communications. You may just be out of coverage. It is also worth leaving places where the signal may be muffled by a dense ceiling, walls or special devices.

If there is a signal on other devices, then you should follow the instructions below, which may return the network to you.

Time change

The reason for the signal loss may be incorrect time and date settings. Errors can occur even if the minutes do not match, so it is recommended to set the time reconciliation mode to automatic:

Checking airplane mode

First, make sure airplane mode is turned off. Its status can be seen in the panel quick access. Secondly, if it was turned off, turn it on for 15 seconds, and then turn it off again. These actions will reboot the SIM card and possibly return the network to it.

Turn airplane mode on and off

Data reset and update

While in the device settings, select the “General” section, and in it the “Reset” subsection. Open the “Reset” section
Reset your network settings. Resetting network settings
Return to the main settings and click on the “About this device” button. Automatic diagnostics will be carried out to check for cellular updates. If they are found, you will be prompted to install them, confirm the action and wait for the process to complete. Go to the “About this device” section
Return to the device settings and select the “Cellular” item, and in it the “Cellular Data” sub-item.
Open the “Cellular Communications” section
Fill in all empty fields. Data for them can be obtained from the official website of your mobile operator. Entering cellular data

Physical check

If the above steps did not help, then you need to check the SIM card. Pull it out and see if it will work in another iPhone. If the network is not found there, then the SIM card will have to be replaced. This can be done at the nearest service of your mobile operator.

Checking if the SIM card works

If the SIM card works in another device, then there are two options left: either some part of the phone is damaged and it needs to be taken to service, or there are errors in the firmware that prevent the SIM card from working, and you will have to perform a restoration.

How to restore your device

If you have an iCloud or iTunes backup, you can reset your device without losing any data. Otherwise all personal information And installed applications will be irretrievably lost, so make sure you have a backup copy in advance. After that, connect to Wi-Fi networks, go to the main settings of the device, then to the “Reset” subsection and select the “Reset content and settings” function. Go through the reset procedure, after it is completed it will begin initial setup device, at one of the steps of which you can specify from which backup you want to restore your device.

Resetting content and settings

Video: what to do if iPhone does not receive a signal

How to avoid similar problems in the future

To avoid losing your network in the future, do not change the device and SIM card settings unless you are sure exactly how to do it correctly. You should not frequently insert or remove the SIM card, this can damage it. Also don't forget to update backup copy, stored in iTunes or iCloud, so that in the event of damage to the system part of the device, you can restore information without loss.

If your iPhone doesn't have network reception, check to see if you're in coverage. After that, change the date and time settings, use the Airplane mode feature, and reset your network settings. If this does not help, reset the settings and content of the device, and then take it to a service center.

During operation, it happens that the iPhone does not catch the network. Situations when the iPhone does not see the network may be related to the device settings and external faults.

Reasons for network loss on iPhone

The reasons why the iPhone 5 has poor network reception may be the following factors:

the presence of external problems with the card, for example, its incorrect cutting;
there is a problem with the antenna on the iPhone;
there are no funds in the account;
card blocking;
a common reason why the iPhone 5 does not see the network is incorrect set times and date;
bad weather conditions;
blocking by communication adapter;
the formation of some problems with the device itself.

If the above problems occur, it is possible to solve them yourself, without contacting your telecom operator.

Troubleshooting

If the iPhone 5s does not connect to the network, you can try rebooting the device. If there are no results, you should perform the following steps:

1. Go to the setup operation and turn on Wi-Fi.

2. The date and time must be selected (function - “Basic parameters”).

3. Activate the function - “Automatic”. If it has already been activated, turn it off and on again.

4. Wait about a minute and reboot the device.

Perhaps the operator is located in a remote area and is not able to provide quality services. To eliminate this situation, you should enter the operating mode and select the “Airplane Mode” function, then wait 5 - 10 seconds and turn off the device. Upon completion of these operations, the iPhone will begin searching for the network. Sometimes you will need to install a system update. To do this, you will need to go to the section - “About this device”, where there are new system files, and then connect to the Internet, while simultaneously starting the update process.

Very often, the iPhone does not see the network or there is no network in the iPhone 5, due to malfunctions after unlocking. To correct this situation, you will need to completely reset the settings. You will need to attach a card with the choice of the option - “Reset network settings”. Problems with the network in the iPhone 5, as well as in the iPhone 4s, iPhone 6, may occur when activated using the SAMPrefs and Redsnow systems. If the unlocking process is successful, but there is still no network on the iPhone, you need to reset the settings. Then you will need to insert the card and connect to the computer, with simultaneous connection to iTunes. Make a backup and click on the function - “Recovery” and select the section - “Recognize as a new device”.

Using a third-party iPhone

What to do if the IOS firmware has been updated and during the process of replacing the card, it happens that the iPhone 5, iPhone 4 and iPhone 6 do not catch the network and show no network on the screen? A simple solution in this situation is to create Wi-Fi using third-party iPhone, with connecting it to the Internet and distributing a wireless communication option.

The procedure to follow if the iPhone does not see the network using another device:

go to the iPhone settings section and select “Cellular”, then the data transfer function;
should be written to the APN field indicator (modem mode). It is possible to find out the settings data from technical support from operators;
Usernames and passwords can be left blank;
Having returned to communication, visit - “Modem mode”, activating it;
Upon completion of the actions taken, the section “Modem Mode” should appear, when activated, the device will “give” the Internet.

If unavailable this method, all that remains is to carry out the process iOS firmware, while simultaneously downloading the firmware file and connecting the smartphone to the computer where iTunes is installed. In the application, select the function “Restore”. This will delete personal data.

Sometimes the reason why the 5 ES or iPhone 4 does not catch the network well may be that the card tray is very dirty. In this regard, it is desirable. thoroughly clean the tray from accumulated dirt and moisture. It often happens that after flashing the iPhone 3gs, it does not see the network or says no network. In such cases, you will need to visit a service center, since, most often, this is caused by the device being blocked by the adapter.

In the process of blocking for cellular communication, when the phone does not support other cards, you should contact a service center, where they will offer unlocking using the IMEI code. Then you can use other cards. During these activities, you will be able to select suitable operator by visiting the main page of the resource. If the operator names are unfamiliar, you can use IMEI - check network logos and order this service, with a careful study of the proposals provided. If the iPhone is blocked by operators and blocked by ICloud, you will need to unblock ICloud (in this case, the iPhone should not be on blacklists). After this, order the service from a suitable operator. If there is a problem with the iPhone 5 not receiving the network due to problems with the hardware, most likely it will be necessary to visit a service center to repair this equipment.

If the question arises - “why doesn’t the iPhone connect to the network?”, you should first determine the cause of this problem in order to choose the most correct method of troubleshooting.

Here are the common causes of network and signal problems on iPhone.
If your iPhone doesn't pick up Wi-Fi, this will help you.

1. Weak signal

Sometimes buildings do not transmit a cellular network signal well due to the nature of their construction or their location. If you urgently need to make a call, try finding a network in another location.

2. Problems with the SIM card

Does iPhone see a SIM card? If not, it will help you.

3. GSM signal jammers

Some institutions may operate so-called “jammers” - jammers that suppress cell phone signals.

4. You are out of range of the operator

If, for example, you bought a SIM card regional operator and arrived in Moscow, your SIM card will switch to one of three popular operators.
If this switching does not occur and there is no operator icon or signal indicator, try rebooting the phone.
You can independently select an operator from the list. Go to Settings→Operator, disable the “Automatic” option, the list of operators will load.
If this doesn't help, buy a local SIM card.

4. The phone was brought from abroad

An iPhone purchased in another country may be locked to a specific operator. For example, an iPhone from America will only work with AT&T.

5. Reboot required

6. Network settings need to be reset

Open Settings → General, click “Reset network settings”.

7. Phone dropped or exposed to moisture

If you dropped your iPhone and it stopped receiving the network, it is most likely damaged GSM module. A fall could result in more serious damage, such as damage to the motherboard. Moisture that gets into the phone case is also destructive. The exact cause of the problem can be determined by sending your iPhone for diagnostics. At the Macsouls service center, diagnostics will be done free of charge and in 15 minutes.

8. Software glitch

A system failure could cause that iPhone Doesn't catch well on the net. If after diagnostics it turns out that the reason is an iOS failure, we will do a flashing. Flashing an iPhone of any model (iPhone 3G/3GS, iPhone 4/4S, iPhone 5/5S/5C) will take no more than 25 minutes.

In the world of Apple phones from Apple, not everything is as smooth as the manufacturer portrays. The “No network” error on iPhone is one of the most unpleasant phenomena. Moreover, it appeared on the iPhone 4, then on the iPhone 5 and 5S. And the sixth version did not escape this trouble either.
There are three cases in which this error can appear.

1 The phone was brought to Russia unofficially and locked to a specific operator.
Many who bought an iPhone on EBay or other foreign exchanges encountered this. Due to this, the price of the device is significantly lower. But such a phone will not work without unlocking and will give out this one iPhone error"No network". There is only one way out in this situation - take it to a specialist and pay for unblocking. You can't think of anything else.

2. Software failure of the smartphone.
This also happens - it’s still Chinese, even though it has the Apple nameplate. First, reboot your phone. If it still doesn’t find the network, then try going into the settings and moving the “Airplane mode” slider back and forth several times:

As funny as it may seem, sometimes it works.

If you have just updated the firmware or reflashed your iPhone, and then the “No network” message appears, then very often the reason is that the time and date were set incorrectly. To change it, connect your phone to an Internet connection. After that, go to Settings >>> General >>> Date and time:

There you need to find the slider automatically and put it active mode. If it is already turned on, turn it off and on again. After this, reboot the device.

The reason for the “No network” error appearing on the iPhone may be a settings failure. cellular network. Try resetting them to factory settings. To do this we go to Settings >>> General >>> Reset:

Click on the “Reset network settings” button. The phone will display this confirmation:

Click on “Reset settings”, after which you need to reboot and check whether the network appears.

If all else fails, try updating your iPhone via iTunes. If you have a backup, try rolling back to it.

3. The last one is a hardware problem with the phone.
Most often - with an antenna. Or a radio module. If the “No network” error on your iPhone appeared after you got it wet or dropped it, then most likely this is what led to the problem. There is only one way out - going to a service center. I’ll say right away that repairs are usually not cheap, so be prepared for financial expenses.

iPhone 7 users may encounter the following issue: bad reception cellular signal. Moreover, communication often fails at the most inopportune moment. The first step is usually to determine the signal cutoff frequency and check the operation of the SIM card.

By the way: poor network reception is the second most popular call to service centers (after glass replacement).

You can send your iPhone 7 for repair to any of the branches of our service center and the technicians will quickly fix any problem in the operation of your smartphone.

Note! If a SIM card does not work in an iPhone 7, but connects to an old Nokia, such a SIM card is still considered faulty. To prevent frequent disconnections from the network, it is recommended to replace ten-year-old Beeline or MTS SIM cards with the latest models (which can be done at any operator office absolutely free).

Diagnosing the problem why iPhone 7 does not catch the network

Phone out of range. For example, after going on a trip or moving to another city, you discovered that your iPhone 7 does not receive the network. Reboot your phone - an available carrier will connect to automatic mode. If this does not help, then try going to “Settings”, select “Operator” and turn off automatic operator selection. If there is no result in this case, then all that remains is to buy a SIM card from an operator operating in a given city.
The phone has been flooded or dropped. The accumulation of moisture inside the phone often causes corrosion of the board. If dropped, important components on the motherboard can also be damaged. Such repairs are considered quite complex: a whole set of microcircuits, switches, amplifiers, receivers and other elements that fail both together and separately are responsible for the operation of the phone. To determine the location of the problem, you need to ring the modem's power circuit and check all working elements. Next, the faulty parts are soldered off and new ones are installed. The best solution here is to take the device to a service center.
iPhone 7 does not connect to the network due to a software glitch. If the signal is bad or complete absence networks are caused by system malfunctions, then diagnostics are needed to correct such a problem. iOS crash requires flashing the phone, which can be done in the service (in about 20 minutes).
Network suppression. The signal is jammed by walls made of iron, brick or concrete, as well as in elevators and basements. Sometimes they are installed in buildings special systems to suppress networks that create interference. In any of these situations, the easiest way to solve the problem is to just go outside.
iPhone 7 was imported from another country. The network is not caught due to the fact that the phone is programmed to interact with by a certain operator communications. To unlock such an iPhone, it is better to contact the appropriate services.
The signal reception antenna is faulty. If you see “No network” on your iPhone screen, then the problem may be a faulty antenna. TO motherboard the antenna is attached using coaxial cable and a special connector - when mechanical influences she may jump out of the nest. The service center will return the antenna with a small amount of sealant added. As a result, the iPhone, which did not see the network, starts working like new.

Lack of network on iPhone 7 is often fixed simple reset settings. Go to “Settings”, select “General”, “Reset” and click on “Reset network settings”.

For many iPhone users The problem of network disconnection often arises, which leads many to panic and gives no rest.

You need to reboot your smartphone using a deep reboot, for which you will need to click on Home key simultaneously with the “Shutdown” key. The phone's operation may improve due to a complete reset of all network parameters and updating them, but if this does not happen, you can try several other methods.

Causes and actions when identifying a problem

You need to carefully remove the SIM card and make sure the contacts are completely clean. They can be blown off with compressed air.

Another reason for this problem may be that many buyers of these phones, without thinking at all about the consequences, can damage the SIM card contacts when cutting it. This procedure must be carried out with the help of a specialist in an authorized store.

Another way to restore connection on iPhone is to connect to Wi-Fi and install correct date and time, which can be quickly done in the settings menu. You can try turning airplane mode on and off a couple of times, which can often help you out.

Fixing the problem with factory unlocking

Most common cause errors can occur when unlocking using the Ultrasnow program or updating the firmware to iPad versions. This is not at all related to the hardware, since the “no network” error means that the smartphone has accepted the SIM card, but there are obstacles to receiving communication in the network itself. program structure.

One of the most popular and correct solutions to the problem is resetting network settings through general settings. You can also try to delete information, which may damage the existing program code.

Error when activating/deactivating iPhone 4s using Ultrasnow or SAMPRefs applications

To solve this problem, you will need to insert your SIM card and connect it to your computer with iTunes. Next, when iTunes detects the phone, you need to make a backup and click “Restore”. After the recovery process is complete, two functions will be available to you:

Restoring from backup.
Use your iPhone like a new phone.

If none of the methods help

The main thing is that if none of the above procedures helped you, you will have to contact the service center, since the loss of communication is quite serious and complex problem, which must be left to real specialists to solve.

After all, quite often connection problems arise due to a broken antenna. In this case, for models 4, 4s and 5s you need to contact official center, in which they can quickly and efficiently replace this same antenna.

It is not worth giving your smartphone to third parties, since the IPhone does not connect to the network due to incorrect operation of the internal amplifier. This problem rarely arose in the 4s, however, in the first batch of the five it was present at almost every step, which partly led to a decrease in the popularity of the models.

Many Internet services offer network restoration services for iPhone 4s and more. later versions via IMEI number. If you unlock your smartphone using this method, you can use SIM cards from any operator on it.

If the mobile operator is blocked in the iPhone 4s, 5s, 6, 6s, then you will have to unlock iCloud, which can also be ordered on these resources, and only then purchase the unlock service from the mobile operator.

Also, if you are interested in games on iOS or Android, you can search for them on QGamer.ru.