Installation drivers for Windows were not found. The required driver for the floppy drive was not found

Useful tips

Programmers are known to be lazy people, like most people. When a program is developed, exceptional situations must be worked out, for example, a file is accidentally deleted/damaged, there is no access to the Internet, the mouse, keyboard, encoding are broken, new devices, connectors, Friday the 13th... whatever.

And for each case, programmers need to write a window or in some other way notify the user that something went unplanned, and also make sure that the error is correctly understood by the user (But we already have problems explaining to users programmers).

We all understand perfectly well that such an activity is very tedious and you can make a mistake; you can simply not take into account the probability of the coincidence of several events or the emergence of new devices.

This is the kind of mistake, if you can call it a mistake, that the developers of the Windows 7 installation process made.

What did they do and what did they forget?

They created an incorrect message for the user about what happened wrong. Instead of writing a message saying that there is no necessary driver for the device from which you are trying to install operating system Windows. The one who wrote the driver error message thought that everyone would install Windows 7 only with optical disk. But what about the ability to install from a USB flash drive? But what about those users who install from a card reader and others? external devices? What's the result? And in the end this is what:

Driver not found error optical disks when installing windows 7 from a flash drive

But, starting with Windows 8.1, the developers corrected themselves and this error window was slightly redone.

not found required driver for optical drive in windows 8.1 and windows 10

But again, in what form should this driver be? And where can I get it?

If during installation of Windows 7 and most likely in more later versions, you encounter such a message during installation, then here’s what you need to analyze first:

From what device is coming installation. Possible options CD\DVD, Flash, USB-HDD ( External HDD via USB)
If this USB device, then in which USB port it is included. Possible options . or USB 3.0. (More details about USB 2.0\3.0 connectors below.)

What is the difference between USB 2.0/3.0?

To distinguish these two USB connectors, just look at the picture below. We emphasize that USB 3.0 is usually highlighted in blue, in contrast to the white USB 2.0.

Visual USB difference 2.0 from USB 3.0

If your laptop or computer does not have USB 2.0 connectors (and if there are any, installation flash drive it is better to insert into them), and all of the available ones are USB connectors 3.0, then you need to download the driver for the latter, since at the time the operating system was released Windows systems 7 there was no driver support in the installation image.

To download required driver First you need a motherboard. After that, go to the drivers section on the manufacturer’s official website, find your board there and download the USB 3.0 driver and you may need the ACHI driver. (hard drive controller).

Selecting the official website of the motherboard to download the necessary drivers

You can, of course, try to download the latest one Windows version 7 s latest updates, perhaps they added support for USB 3.0 drivers to the installation image itself.

Do you have a driver? What should I do?

If you managed to find the drivers, then you need to unpack them, write them to any flash drive, insert them into USB and indicate them in the “Load driver” window using the browse button. But here, too, it may not be possible without adventure. You will most likely first be pleased with this message:

Error loading driver during windows installation

Then click “OK” and then click the “Repeat search” button.

Note USB drivers 3.0 when installing windows

What to do if all of the above does not help?

If the above does not help, then you can:

Try using a different device for installation, try burning to another disk (It is recommended to use DVD-R, CD-R and it is better not to use rewritable RW disks to install Windows at all), write installation files from the image at minimum speed.
When installing from a flash drive, try inserting it into all USB connectors. It's very likely that one of them will work.
Check the integrity of the installation image, download again, take another image.
Use verified operating system images. It is recommended to use official images downloaded from official sources.
Format the flash drive according to the Windows installation recommendations.
Use another program to write the image to the drive (For example, Novicorp WinToFlash or )
For those who install the operating system via DVD drive or CD disk, in some cases cleaning the disk drive laser helps.
You can try Ahci/IDE modes
If you have a laptop manufactured in 2016 or later and you are trying to install Windows 7 on it, then most likely you will not be able to do this in any of the ways described above, simply because it is optimized to work only with Windows 10 and most likely the version.

Good day my dear readers!

I recently decided to install an operating system from scratch and ran into a problem that left me confused. For some reason, when installing windows 7 requires a driver.

First actions

If you encounter such a problem, do not despair, I will tell you what to do. First, let me explain why this could happen. Almost all users use distributions that they downloaded from the network and burned onto a flash drive or disk themselves. No one can guarantee that the downloading of files took place without incident. Maybe some part was not downloaded, and now Windows is asking for drivers for optical drive. Plus, perhaps the disk image itself was damaged or infected with a virus (you can check the image for viruses using the same Comodo Internet Security). You can't know that, right?

The first thing to do is to find another image with the distribution and burn it again to removable media. It is also important to be sure that your storage device is in full working order. Otherwise, you can suffer like this for more than one hour. Try changing the USB port when connecting a flash drive. Maybe it got loose and started to malfunction.

If this does not help, move on to the next step.

Errors due to components

While you are trying to install an operating system from other distributions, pay attention to which device drivers your computer requires. For example, if the system needs software for hard drive, and every time, it is quite possible that the problem is in the BIOS or in the hard drive connection.

If the OS requires a driver for the drive during installation, then it is quite possible that the BIOS settings have also gone wrong. It happens that, if handled carelessly, the SATA cable that powers the components from the motherboard shorts. Because of this, the BIOS settings become confused and require adjustment.

In order to enter its settings, you must immediately hold down one or more keys after restarting the laptop. Depending on the laptop model, the necessary buttons. I will give a sign that will help you find these keys.

If everything is done correctly, a sign like this will appear.

Next, in the section with hard drives, find your device and change its priority to Disable or None. There are two types of hard drives - SATA and IDE. If you don’t know which model you have, check both HDD tabs in the BIOS. Reboot and reverse the changes. Then restart the PC again and try installing the system again. If the PC again requires a driver for the hard drive, then the problem is hardware.

The same goes for your drive. Only in BIOS you no longer disable the hard drive, but the drive.

Solving hardware problems

If everything described above does not help, then you will have to disassemble your car. By and large, there are no problems with this on laptops. Turned it over, untwisted it, assembled it. But I will describe everything step by step.

Initially, you turn off the PC, unplug the power cable and remove the battery. Necessarily! Otherwise, you can burn all the components, since the battery contains a charge, and it can lead to short circuit! You need to solve the problem with the drivers, and not buy a new computer.

Then, you need to unscrew all the bolts, but do not lose them. Remove the panel and part of the housing. You will see almost the same picture as in the image below.

Myself HDD is located right here.

It needs to be disconnected and reconnected, but first remove the fasteners, otherwise they will prevent you from doing this. Just slide it to the side, pull it out, and blow out the contacts just in case. It will be better if you wipe them with a regular pen eraser. Then reconnect the device. Also install the mount. Just in case, you can watch a video online showing how this is done.

If the system required a driver for the floppy drive, then you need to remove your drive accordingly. Then you collect everything, restart the PC and try to install the system again.

If everything went well, the system was installed without errors, then the first thing to do is install the drivers for Wi-Fi. You will need to go online and download a program to diagnose your hard drive. For example, HDD Regenerator for Windows. Download you can here. Install the software and carry out full check. The program itself will tell you what to do and what condition your device is in.

If all indicators are normal, then you need to update the drivers for the HDD itself. Where can I download them? The best place is on the manufacturer's website. If this is difficult, use the utility Driver Booster Free. You can download it from here. Run the scan and it will do everything itself necessary actions. All that remains is to restart the laptop. Thus, the problem with driver errors is completely resolved.

Always handle your laptop carefully. Do not drop or hit it, especially in the hard drive area. This is a fragile component that can be easily damaged. In it, the reading head is located a hair's breadth away from the magnetic dies. If they get scratched, you'll have to buy a new device!

Conclusion

I have given you all the methods that will help you solve this kind of error problem. In most cases, it arises precisely because broken file system image or bootloader program errors. This problem does not occur with licensed operating system disks. It can often be found in distribution builds. I don’t recommend you install these.

Home-grown programmers can stick whatever they want in there, but you will have to suffer. Read user comments before downloading. If the distribution is broken, those who have already tried it will write about it.

With this I say goodbye to you, my dear readers. Share the link to the article with your friends on in social networks and subscribe to blog updates! I wish you no problems with your computers! See you again in my articles!

An error when it says “the required media driver was not found during installation” can be misleading not only inexperienced users, since the text of the message does not clearly indicate the type of problem. The article will help shed light on the cause of the problem and possible ways its elimination.

You should be a little happy, since usually such an error occurs as a result of minor problems, sometimes failure, but only of the media itself. HDD itself or SSD drive doesn't have a problem.

Causes of the problem

There are several key options that cause the “required driver not found” error to appear. Windows media 7".

Lack of USB 0 support;
Crooked content recording or any system problems;
The media itself is faulty.

All problems exist, but they are very easily eliminated. Perhaps by looking at the key list of failures, you can immediately pay attention to the correct item, otherwise you should alternately perform diagnosis and subsequent solution.

USB 3.0 standard is not supported

Despite the abundance of USB 3.0, this was not always the case. It is in Windows 7 that there is built-in support of this format Not yet. In fact, this is what becomes the problem, so you can easily change the connector of the connected flash drive to 2.0 and the problem will disappear. You can usually tell by the color of the connector.

There is a more severe type of failure when there are simply no ports with the old format on the laptop. That is everything USB ports 3.0 and they are simply unable to properly handle a Windows 7 installation. There are a few basic methods you can use here to get your drive to handle correctly again.

The first and easiest option for recreating 3.0 support is to simply load the drivers onto the drive and specify the path to them. You should download the appropriate drivers from the manufacturer's website; they may be included with the chipset. Then add working files to the drive, this should be a folder or several files like inf, sys, etc. If you have the exe version, you must first install it, and then find it and write it to the drive. After recording, when an error appears, simply specify the path to the partition on the device;
The next current method is to change the BIOS settings. Thus on program level You can replace USB 0 with 2.0. This option may not work if you have USB 3.1. You should go to UEFI by pressing Del or F10. Now look for the “System configuration” tab at the top. Now you need to change the “USB 3.0 configuration...” parameter to the “Disabled” position;

Another option is to add USB 0 support to Windows distribution. This method quite complex and requires skills in the software environment. Due to its difficult availability, we will not consider this option; as an alternative, you can simply download Windows image 7 immediately with this function;
If it is not important for you to install Windows 7, then you can download the Windows 8 distribution kit, which is styled like version 7, there will be practically no obvious difference.

I think the error Windows installation did not find the required media driver specifically for this reason should be resolved fully.

System failures when recording the system

be exposed similar problem Absolutely any drive can do it, and therefore so can the user. Usually the problem is at some stage of recording or creating a Windows distribution.

IN general malfunction most often manifests itself at 3 levels:

Broken, incorrect system image;
The recording program has failed;
Outdated information on the drive;

Here Windows error 10 the required media driver was not found is considered from the perspective of the assumption that the drive itself is working.

To fix the problem, you should first advise downloading images from the official Microsoft website. Since often unmastered people with their repacks make a lot of noise and change critically important parameters system, which leads to failures, it is better to trust the official developer. It is also possible that there was simply a problem loading Windows files.

Next, if you created a disk or flash drive when UltraISO help, then it is better to change the program. A worthy representative, although less functional, is WinSetupFromUSB. It requires you to specify several basic parameters for recording and the action will be performed independently.

Sometimes, for unknown reasons, when a disk has been lying around for a long time, it may have problems reading it, even though there is no external damage. A failure can also occur when burning is not completely completed or the disk has some problems. It's better to use another disk or flash drive.

Equipment is faulty

The last obvious problem is when the flash drive, external screw or disk is simply faulty. At the same time, on other devices, they are sometimes processed correctly. Discs especially suffer from such vibrations. Obviously, you can determine the serviceability of the equipment if you replace it with something else and record the installation distribution again.

Another common cause is the drive, since it is already becoming obsolete and most of them have not been used for years, it is obvious that its technical condition. Over time, the laser becomes less sensitive and can cause various problems.

Sometimes the flash drive itself can cause problems, because it also fails. You can try to bring it back to life using programs like Flash Drive Recovery.

Using all the presented methods in turn, you can get rid of the annoying problem and calmly install a new operating system, without wasting extra effort and nerves.

If you still have questions on the topic “What to do if Windows installation there was an error “The required media driver was not found?”, then you can ask them in the comments

if(function_exists("the_ratings")) ( the_ratings(); ) ?>

Many PC users are accustomed to reinstalling the operating system themselves, be it Windows 7, 8 or 10. Of course, during the installation process from a flash drive or disk, all sorts of problems arise. Today we will talk about the problem "Device drivers not found".

Why does the error occur?

Since Windows release 7 technologies have managed to move ahead. In many modern computers and laptops contain equipment for which there are no drivers in standard assemblies installation image. Most often, the user sees a message about a lack of drivers for the hard drive and optical drive.

The most common cause of the problem is the presence of an interface USB 3.0. Since the image does not contain drivers for it, the system informs the user that the equipment cannot operate stably, and therefore continue with the installation.

Ways to solve the problem

So, a few simple tips to eliminate the error.

As a rule, the above tips help solve the “Device drivers not found” problem in the vast majority of cases. But what if they didn't help?

Change the software for recording the image

Experience shows that the problem sometimes occurs when writing to a flash drive. specific program. Try using another utility to create boot disk. We can recommend you the following products:

Please note that we recommend downloading software from the developer’s websites in order to avoid all sorts of problems and file corruption. This recommendation also applies to the driver for 3.0. To download it, visit the website of the laptop or motherboard manufacturer.

Integrating drivers using special programs

If you have not previously created assemblies yourself, we recommend using the application vLite. This utility, among other things, allows you not only to integrate any drivers, but also to supplement the original Windows image own software. Of course, there are many analogues, so you can choose something else.

For creating bootable flash drive With the drivers we need, we will need an operating system image and a driver for the equipment. In the utility menu, you will need to specify the path to the image, and when selecting operations, the path to the unpacked driver. If we're talking about about vLite, then after assigning events, the step-by-step assembly of the bootable flash drive begins: first the image is recorded, and then integration occurs. Upon completion of the procedure, we get the desired result. Here's a small one Video instruction, which is in a foreign language, but if you are PC friendly, you will understand.

There are more complex ways driver integration, but they are more suitable for an advanced user, for example, using distribution higher OS versions.