Glass does not stick to iPhone 7. If you doubt your capabilities, we advise you to consult with our specialists in advance using the contact phone number or the specified email address

All tips

iPhone 7 Plus and iPhone 8 Plus have big screen, which means it will have more scuffs and scratches. Therefore, you should think about buying a good tempered safety glass. If you are looking protective glass on iPhone 7 Plus or iPhone 8 Plus, check out my list of the best protective glasses for iPhone 8 Plus and 7 Plus below.

Nillkin Screen Protector 3D

Designed specifically for iPhone 7 Plus and iPhone 8 Plus (and iPhone 6s Plus), Nillkin 3D glass screen protector is 3D Touch compatible, so pressure won't cause cracks or bubbles. These are real strained glass, but it is designed so that if it breaks, its pieces remain harmless, i.e. it won't damage your screen or cut your hands.

This glass protector is coated with an oleophobic coating that repels oil from your hands, leaving your screen clean and free of your fingerprints.

Nillkin 3D protective glass is very transparent, so after applying it it is almost invisible. IN included a microfiber cloth, a degreasing cloth, a sticker for removing dust particles, and a sticker for easy installation glass

Protective glass Red Line Tempered Glass

Red Line is proud of its "world's thinnest" protective glass for phones. The thickness of their glass is 0.2-0.3 mm, so the sensitivity of pressing force is not lost at all and it is even unnoticeable that this glass is there.

Red Line Tempered Glass is ideal for people who also use an iPhone 7 Plus case as it leaves a slight margin around the edges.

With hydrophobic and oleophobic coating, this screen protector will always be clean without you having to carry a microfiber cloth with you.

The kit includes two protective glasses and a guarantee against bubbles and cracks; Red Line promises to replace the glass for free.

uBear Nano Full Cover Premium Glass

Another toughened glass screen protector, this time from uBear. Its protective glass is almost as thin as the previous one, 0.3 mm, and uBear promises 99% transparency, so that after the sticker it should not be visible on the screen.

This protective glass completely covers the flat part of the iPhone 7 Plus screen, leaving a small space around the edges. Without a case, you may notice a ring around the screen where the protective glass does not cover. This is a fairly common "halo effect" today, as most phones have beveled edges around the edges.

uBear Nano Full Cover Premium Glass comes with a lifetime warranty, so if bubbles start to appear, just let uBear know and get it. free replacement.

Safety glass NILLKIN

I personally used NILLKIN protective glass, although it was on an iPhone 6, but the glass lasted three years. Nillkin 3D CP+ is really ballistic glass, it is made from 5 layers of Japanese Asahi glass, the same company makes windshields for Mitsubishi.

NILLKIN has a lifetime warranty, and the company's website says that the warranty applies even if you get confused during the decal and apply it incorrectly, you will receive a free replacement.

It's important to note again that the iPhone 7 Plus has curved edges, so these protective films I will only cover a flat surface to prevent blistering and peeling. With Nillkin 3D, you get superior transparency, unobstructed pressure sensitivity, and 3D Touch compatibility.

Baseus 3D Arc Tempered Glass

One of the best manufacturers Protective glass for screens is also considered by the company Baseus. If you do not want to glue the film, but want glass, you should pay attention to this manufacturer. Its safety glass is made from a single layer, which combines all the qualities of laminated safety glass.

Baseus 3D are classified as "smart films" as they easily stick to the screen of the iPhone 7 Plus and have the ability to self-install when removed small scratches as if no one was there.

Like any protective glass, Baseus 3D has guarantee period, so if you are not satisfied with the quality, please let Baseus know.

Deppa Tempered Glass

Tempered Deppa glass is completely transparent and barely noticeable on the iPhone 7 Plus screen. It's 3D Touch compatible, so you won't lose touch or access to amazing sensory functions. It is scratch-resistant and if it breaks, it will not scratch the screen, since when broken, the edges of the glass are blunt.

Includes protective glass, microfiber cloth, degreasing cloth, sticker for removing dust particles, sticker for easy glass installation. The glass costs 909 rubles.

What glass do you use to protect the screen of your iPhone 8 Plus?

Would you like to recommend a protective glass that you yourself use on your iPhone 8 Plus or 7 Plus? Write about it in the comments below!

To extend the life of the new iPhone 7, it would be quite advisable to equip its screen with additional protection - special-purpose glass. This service can be obtained at any mobile phone store (regardless of whether you bought the device there) or service center, but for money. You can do this yourself for free, and for this we have prepared for you an instructional article on how to glue a protective glass on an iPhone 7.

We will try to determine step by step what you need to do to accurately fit the glass, so that your iPhone screen will subsequently retain both aesthetic and tactile characteristics.

Preparing your phone display

In addition to the glass itself, any protective glass kit should include the following set of accessories:

alcohol wipe
microfiber cloth
“absorber” - a sticker for collecting small particles of dust and dirt from the display
additional stickers for fixing the glass on the iPhone case (optional).

You will have to take advantage of all this. First wipe the screen with a textile cloth, then with an alcohol wipe, then wipe it again and very thoroughly with a textile cloth.

* Important!
After using the alcohol wipe, carefully inspect the screen for streaks. Some masters do not use napkins specific manufacturers to avoid their occurrence. If you do identify stains, try to neutralize them with microfiber.

Glass installation

Before sticking 7, remove the shipping sticker from the glass, holding it parallel to the completely clean phone screen. You must remember that not a single speck of dust should fall on the glass after removing the sticker from it.
The glass sticker on the iPhone 7 is carried out in the same way as the glass sticker on other iPhone models- by aligning the glass holes according to those placed on the device Home button and outlets.

* Important!
You must choose the optimal method of placing glass on the screen yourself. You can simply lower the glass and press it in the center with your finger through a textile napkin, then removing air bubbles to the edges, or you can start at the top or bottom of the device, moving to the opposite edge.

Checking the screen

Now you should carefully check the front part of the screen under the glass to see if there is any air or small particles of dirt there. If there are any, use the remaining absorbers and a special mini-spatula (if provided in the package) to eliminate them - collect the dust with small stickers, first pry the glass, and expel the air with a spatula. Microscopic air bubbles should disappear on their own after 2-3 days of using the smartphone with glass.

If you managed to perfectly glue the protective glass onto your iPhone 7 and you didn’t find a single microscopic bubble or speck of dust underneath, we sincerely congratulate you. If you couldn’t cope, or you want to trust our specialists, but have not decided to equip your device yourself, they will be happy to help you.

 Dmitry Marishin

In this lesson we will tell and show how to properly install protective tempered glass oniPhone of any model.

Protective glasses demonstrate superiority compared to conventional films. They have a scratch-resistant hard coating, higher light transmittance and a smoother surface.

There are various studies on the effectiveness of glass protection panels, which all boil down to the fact that they can actually protect your iPhone screen from damage! Of course, glass is not a guarantee of absolute safety from strong impacts, but it can really save you money if your phone falls on hard surfaces. Remember, it is always faster and cheaper to replace the protective screen than the display of the device itself.

So, how to stick a screen protector on an iPhone, professionally, without any air bubbles left in the middle? Watch our video tutorial and read the instructions.

Installing a protective glass on iPhone

Typically, accessories supplied as standard are sufficient to glue the glass correctly:

Name	Qty	Description
Wet wipe		The cloth is impregnated with a special alcohol cleaning liquid and packed in a sealed bag. Used to clean the screen surface from sweat and other contaminants.
Microfiber		Special dry cloth. Used after using a damp cloth to wipe and polish the screen surface.
Stickers		Adhesive tape. Helps to apply the protector evenly.
Glass		Protective glass.

First step.

Without removing the film from the protector, place it on the iPhone. Thus, you will make sure that the accessory fits the smartphone and feel with your hands how it is correctly aligned.

Second step.

Using a damp cleaning cloth, wipe thoroughly iPhone display for basic cleaning. Take your time as the surface needs to be perfectly clean.

Third step.

Using a dry microfiber cleaning cloth, thoroughly clean the surface to remove any remaining dirt and dust particles, as well as remove any liquid that may remain after completing step two of the instructions. As a result, the display surface must be clean and perfectly dry.

Fourth step.

Remove the film from the back of the protector and slowly apply it to the iPhone display. Align the edges of the screen protector and carefully place it on the phone screen. Then inspect all edges and surfaces. If you notice an area that has not been properly attached and bubbles are visible, use a dry cloth to gently push the air towards the edges of the screen.

If you have not yet chosen a protective glass for your iPhone, then we suggest you get acquainted with our catalog.

We are confident that you will easily find the ideal protection for your smartphone.

If you have any questions, or want to get more detailed advice, write to us on social networks, or call:

Our phone number: +7 978 773 77 77

Many people may drop their phone during use and carry it in their bag, where, in addition to the phone, there are also sharp objects - for example, keys.

Therefore, it is not surprising that after several months of use, scratches appear on the surface, and in some cases, chips and cracks.

However, using modern technologies, you can achieve an extension of the life of the device. Great solution is the purchase and gluing of protective glass.

Visually, it strongly resembles a film designed to solve similar problems.

But such glass is completely transparent and flexible, and due to its increased density it is considered more durable and reliable.

Price protective screen for a phone is an order of magnitude higher compared to film, but the additional money spent justifies the stated price.

If it is present, the likelihood of the screen suffering from damage is reduced to virtually zero.

Why do you need protective glass?

Read also:Without moisture and dust: TOP-20 protected smartphones ip68

Before you stick a protective glass on your smartphone, let's first get acquainted with its main features.

The main advantages are as follows:

increased resistance to scratches and damage. Checking this is quite simple - you can easily rub the surface with scissors or a knife. The face covering will not receive any marks;
absorption of impact energy. Even if the phone falls with the display down, its front part will not be damaged. Only cracks in the protective glass will remain on the surface. The structure of the material from which it is made prevents the appearance of splinters;
reliable fixation. Compared to gluing film, safety glass is easy to glue at home, even if the owner does not have the relevant experience. A special adhesive composition guarantees a strong fixation on the front of the screen. Thus, getting rid of the protective glass will not be easy, which cannot be said about ordinary film, which can be torn off even with a smartphone case.

The use of protective glass is also characterized by a number of disadvantages:

the device will become heavy and bulky;
the cost of protective glass is an order of magnitude higher compared to film;
Extreme care is required during the installation process.

The average display thickness varies from 0.2 to 0.3 mm. The product has 5 base layers:

oleophobic coating . It is responsible for the comfortable sliding of the user’s fingers across the display, and if fingerprints appear, they can be wiped off with a regular cloth. In addition, the task of the oleophobic coating is to provide comprehensive protection against moisture penetration;
protective covering . Its purpose is to maintain the integrity of the screen and prevent cracks/scratches;
anti-reflective coating . Another important layer that prevents dull marks from appearing on the display when using the phone in the sun;
containment layer . If a situation arises where the user is still able to break the display, the containment layer will prevent the appearance of fragments;
silicone layer . Fixed on the display surface.

How to glue glass on iPhone

Read also:TOP 11 Best Chinese smartphones | Current rating 2019

If you want to check out the correct sequence steps when gluing protective glass on the iPhone 6 and 7 series, you must remember that for almost all devices the algorithm of work is the same.

Depending on the name of the glass manufacturer, the contents in the box may vary significantly. As a rule, the kit contains not only glass, but also a microfiber cloth.

In some cases, an alcohol wipe is also present. If, for example, certain materials are not available, you can use alternative means at hand.

So how to properly stick protective glass on a smartphone? The instructions are as follows.

1 If your phone already has old film or glass, you first need to get rid of the coating.

To do this, first remove the cover and then pick up the cover by the edge.

Before performing the procedure, be sure to clean your hands so that you do not leave greasy fingerprints on the surface of the glass during the work process.

If you install them and stick the protective glass on your smartphone, you will see marks every time you use the phone.

2 Prepare your work area in advance.

It can be any flat surface - a table, stool, etc.

To prevent dust and stains from appearing during the process of gluing the protective surface, we strongly recommend turning on bright light in the room.

3 The next step is preparing the screen. Using cotton pads or an alcohol wipe, thoroughly wipe the surface of the display.

After that, take a microfiber cloth and wipe the screen so that no traces of alcohol, dirt, stains, etc. remain on its surface.

Checking for defects is very simple - just bring the phone screen closer to the light source and check the cleanliness of the coating.

If for one reason or another you cannot completely get rid of dust particles, you should try to collect them using ordinary tape.

Place the sticky side of it on the screen and pull sharply.

Please note that this must be done quickly, since if the tape is slowly peeled off, traces of glue may remain on the surface of the display.

Once the tape is removed, wipe the display again with a dry cloth.

4 Each piece of protective glass includes two films.

First, get rid of the bottom film from the adhesive side.

Offer a protective cover for your display.

Please note that you can only hold it by the edges. Otherwise, marks will remain on the surface.

Align and carefully glue the glass along all edges. Be sure to fit it to the speaker and home button.

Then slowly release the glass - it will begin to stick to the display on its own.

Practice shows that not every person can perfectly glue a new protective glass the first time, since air bubbles may remain under it.

In this case, you can get rid of them with a dry cloth. Just press it on the display towards the edges.

After this, all the air goes outside.

If there is dust under the glass, you need to bend it on the required side and get rid of the dust with tape. Then press the protective glass back onto your smartphone's display.

Now, having read the correct instructions for gluing protective glass on the iPhone 5, 6 and 7 series, you will have the opportunity to further save on services service center and independently provide comprehensive screen protection.

We suggest watching video instructions from specialists who talk in detail about how to perform all the steps correctly.

How to stick a protective glass on an iPhone screen

How to properly stick protective glass on a smartphone at home? Instructions for regular and 3D glass

Gluing glass with 3D rounding

Read also:TOP 10 Best budget smartphones with optimal price-quality ratio up to 15,000 rubles. | Review of current models in 2019

If you recently purchased a new iPhone, we strongly recommend that you protect it from screen damage, including chips, scratches, and so on.

This is quite easy to do. We bring to your attention an overview of special protective glass with 3D curves.

These products are designed to provide comprehensive protection to the screen surface from damage resulting from severe impact or contact with sharp objects.

The average layer thickness is only 0.23 millimeters, but thanks to the use of a polymer structure, the smartphone can easily cope with strong impacts.

During production, materials are used that are capable of creating a special barrier that quickly cracks, absorbing impact energy, but at the same time guaranteeing high-quality protection for the screen as a whole.

Compared to conventional glass, 3D curved products offer the following advantages:

Presence of soft edges. Manufacturers use special PET materials to make the edges of the protective surface. This allows you to achieve high-quality and reliable fixation, and the edges will not crumble or crack. This is not only a convenient, but also a safe solution, since the soft edges will not scratch the owner’s hand when, for example, he takes the phone out of his pocket;
3D wrap effect. If, in the case of ordinary glass, only the straight part of the display is covered, gluing glass with 3D curves guarantees comprehensive protection of the entire display of the device. Thus, the extreme curved surfaces will be reliably protected;
Increased level of hardness. Despite the small thickness, the production material has a hardness of 9H. Today, this is one of the few models that fully meets this indicator;
Minimum thickness. Using ordinary Chinese glass makes the phone more difficult to use. Branded products always have a thickness of just under a quarter of a millimeter, but this is quite enough for the device to receive high-quality and durable protection throughout long period time.

To protect the iPhone 7 screen from various cracks, scratches and chips, experts recommend sticking on a special protective glass. It will also help protect mobile device from mechanical damage during the fall.

In addition, it is very simple to purchase and stick protective glass on an iPhone 7 instead of a damaged one, rather than doing a similar procedure with a smartphone screen.

Let's figure out how to properly stick a protective glass on an iPhone 7.

Preparatory stage

Before you start directly gluing the protective glass on the iPhone 7, you need to carry out preparatory work. It includes two stages:

Cleaning the screen directly mobile phone- you need to carefully examine the front surface of this device. Existing areas of contamination should be removed. For these purposes, use a piece of microfiber cloth or special cleaning wipes. household appliances(they are treated with an alcohol solution to get rid of various stains).
If you use an alcohol wipe, then make sure that there are no wet marks left on the screen from its use.
Dust removal - use the blue absorber for small dust particles. It has an adhesive base, thanks to which you can remove even dust particles that are invisible at first glance. By alternately sticking and peeling it onto the iPhone 7 screen, you will achieve a perfectly clean surface.

Glass gluing process

When cleaning of the device is completed, you can begin directly gluing the glass.

You need to pick up the protective glass and remove the pre-installation surface. The protective film must be removed exactly at the moment when the glass is installed. Because otherwise, dust particles may fall on its surface.

The glass holes should be aligned with the sensors and the “Home” button on the mobile device.

You need to start the process of gluing the protective glass either from the top or from the bottom (whichever is convenient for you). When gluing glass, make sure that there are no air bubbles underneath it, as they can be very difficult to get rid of.

When the protective glass is glued to iPhone screen 7, you need to carefully inspect the mobile device again. If no air bubbles or dust particles appear between the screen and the protective glass, then you have successfully completed the task and can use your smartphone.