Many of the things we associated Windows with slowly disappear over the years as technology advances and we form new habits to accommodate. For example, I remember the days when you just had to press F8 repeatedly to boot into Safe Mode.

It was like this little secret- something like a life hack that you could teach a friend in right moment by phone. Those days are long gone, however, even if entering Safe Mode has become more confusing, it is also a hallmark of progress in the Windows boot sequence.

Windows 10 Safe Mode

In Safe Mode, Windows automatically excludes some programs and drivers that are not necessary to boot and normal operation Windows. And he takes only what is necessary minimum quantity. This way, the download process will be fast and safe.

In Windows 10, booting your computer into Safe Mode is a little different than before. Windows versions. Starting with versions 8 and 8.1, Microsoft changed the way everyone used to get into safe mode.

If previously we simply used the F8 keys or the Shift + F8 combination to enter Safe Mode, then in Windows 10 these old methods rarely work. But this does not mean that you do not have another way to enter Safe Mode in Windows 10. In this post, I will show you 4 ways to boot your Windows 10 computer into Safe Mode. Let's take a look.

#1 F8 or F8 + Shift

IN in this case, the oldest method is not the best. Pressing F8 or F8+Shift repeatedly during boot can bring back memories of your first Windows 95 or XP. But the truth is that these key combinations will rarely work in Windows 10.

Since Windows 8, Microsoft has been able to significantly reduce boot times and therefore large percentage modern computers too fast to register these keystrokes. Even if the method is still technically supported by the operating system, the system simply cannot react fast enough.

Of course, first of all you should try to use this very easy way. If everything went well, you will be directed to the Menu additional options boot, where you can select and launch safe mode.

Note: You must press the key quickly enough until the boot logo appears. The boot logo will look like a picture, which may be different for each user, depending on the equipment manufacturer.

#2 Special download options

The Custom Boot Options menu was introduced in Windows 8.1 and it provides a wide range of options for users who have problems with their computer. It also gave access to additional boot options, which is what we needed. Below are several ways to access the menu with special boot options:

• One of the easiest ways to boot into a menu with special boot options is a combination of Shift and the reboot button. To do this, press the button Shift and press reset button. This can be done in Start Menu, V login menu And other places, where there is a reboot button.
• Another way is to connect recovery disk. Immediately after connecting the drive, start the system. You will be asked to select a keyboard layout, after which you will be taken to a menu with specific boot options. Creating a recovery disk is very easy. Simply type "recovery drive" into the search field, plug in the flash drive, and follow the onscreen instructions.
• Finally, you can boot into a menu with special boot options, via Settings > Update & Security > Recovery. There, click the "Restart Now" button under the chapter Special options download and your computer will restart.

All three of these methods will take you to the same menu. There select Diagnostics > Extra options> Boot options. Then press the reboot button, after which the screen will show various options downloads Press F4, F5 or F6 to load one of available options safe mode.

#3 System configuration

The System Configuration menu provides the most quick method, By at least when you are already in Windows. Open the search field, enter msconfig.exe and press Enter. Then, in the tab, check the “Safe Mode” box. If you want to enter Safe Mode with advanced options, select the option Another shell, not minimal. Click OK and you will be prompted to reboot the system immediately.

If you need to do something before rebooting, then simply select the “Exit without rebooting” option and you can restart your PC after.

#4 Startup abort

The last method is a little harsh, but necessary in some cases. For example, if you cannot boot into the desktop, then of all the options that I described above, only one is guaranteed to work on Windows 10 - the recovery disk. Pressing F8 or F8 + Shift simply won't work on most modern computers, and unless you have a recovery disk, there seems to be no way to get into Safe Mode.

If this is your situation, then I want to reassure you that you can still get into safe mode. Do you remember when your computer repeatedly crashed and then displayed a message notifying you that Windows did not shut down properly or startup was aborted (like the screenshot below)?

You can do the same with your computer. Simply start your computer and abort the startup before or when the Windows logo appears. Do this three times and then allow your PC to start normally. Instead of booting to the desktop, your PC will ask you how to start the system, and Safe Mode will be among the available options.

In this article you will find several simple ways to enter safe mode in Windows 10 (in English terminology it is called Safe Mode). Most often, users do not understand how to boot into safe mode if . After all, the F8 key will most likely not work during boot. But first things first.

1. How to start Windows 10 safe mode using msconfig

• Right-click on the button Start.
• Select Execute:

• Enter the command msconfig.
• Click OK:

.

Check the box Safe mode.

Click OK:

• Restart your computer:

Attention! To boot your computer normally, you will need to run the msconfig, uncheck the box, press .

2. Enter Safe Mode using the SHIFT key

This method is useful if, when logging into account The computer freezes or a banner appears or something else.

• Press and hold the SHIFT key.
• Click on the power icon and select:

• Select an item Diagnostics:

• Extra options:

• Boot Options:

• Reboot:

• After a while you will see the following window. To enable safe mode, press the key 4 or F4:

The subsequent steps are identical to those described above.

How to enter safe mode if Windows 10 won't boot

If Windows 10 does not boot even to the welcome screen (where you can reboot via Shift), follow these steps:

1. Create a bootable USB flash drive using another computer using .

2. Boot from this flash drive ().

3. Select language:

5. Select Diagnostics:

6. Extra options:

7. Command line:

8. Enter

Bcdedit /set (default) safeboot minimal

9. Restart your computer. It will boot into safe mode.

Recovery normal mode boot call msconfig from safe mode:

uncheck the box Safe mode, press OK:

And after that, restart your computer. Windows 10 will now boot into normal mode.

What is safe mode in Windows 10 and how to get into it if the operating system does not boot? If you're having problems booting Windows 10 (or 8.x), you can't use the usual "lifeline" that Windows 7 provides - using the F8 key during computer startup to access additional boot options. In particular, in this way in the seventh version you can get into safe mode ( safe mode) and try to solve the problem regular means. For example, if the solution to the problem is to remove the driver or change system settings. The Shift+F8 keys, which in theory can be used when loading Windows 10 to get into the system recovery environment (and this is an analogue of the Seven boot options), are not so easy to use in practice. You will need to practice several times to catch that very moment of reduced system loading when the Shift+F8 keys can work.

Why is it needed?

Safe computer operating mode is a specific Windows status, designed to solve various problems.

In this case, only the most necessary devices and components to maintain the functionality of the OS are used. Safe mode means that you can work with administrator rights; it also allows you to delete files that the system or third-party software will not allow removal under normal conditions.

OS safe mode – environment used for uninstallation incorrectly installed drivers and undoing unsuccessfully applied system settings. For example, if you set a screen resolution that is not supported by the monitor, it will not always be possible to change it to one supported by the latter within a fully functioning system. So, there may simply be no image on the screen, and if there is no other monitor at hand that can display the image with the applied resolution, there is no other way to solve the problem than using safe mode. Instead of a video driver, the monitor uses the VGA standard, which is supported by all video cards designed for Windows devices.

Safe mode is one of the solutions to the problem of viruses penetrating the OS and blocking work antivirus programs. If no part is damaged by malware system registry, which is responsible for loading safe mode, you can try to run antivirus scanner, delete the startup file and/or virus process in the task manager, and also apply other actions to resuscitate the system.

Running system configuration section

Using the configuration section of a running system, you can get into the safe mode of Windows 10 by making some settings and rebooting. Right-click on the “Start” button and select the “Run” function.

In the field for entering commands we write:

Msconfig

After pressing Enter we will see the system configuration window. We are interested in the “Download” tab, here we check the “Safe Mode” checkbox.

By default, the system configuration provides the minimum type of safe mode, when startup programs do not start, there is no sound, the network is disabled, only basic drivers video devices, hard drive, mouse, keyboard and other devices necessary to maintain a minimum performance of the operating system.

You can install other types of Safe Mode in Windows 10. By selecting “Other shell”, safe mode will be without the usual graphical interface, but only with the command line. This may be relevant if explorer.exe fails – system service, which ensures the operation of the OS explorer.

Item "Recovery" Active Directory» provides for loading safe mode from graphical interface and a minimum number of active services, including the Active directories Directory. If you need to contact network resources, then in this case you need to select the “Network” item. It provides, accordingly, for the operation of the driver network card.

Having made your choice, click “Apply” at the bottom of the window and then “OK”.

After re Windows boot will start in safe mode.

Windows 10 boot setup process normal mode– reverse. In the system configuration section, the “Safe Mode” checkbox must be unchecked.

Shift key and reboot button for a running system

Another way to get into safe mode if Windows is in in working condition- This is to use a single press of the Shift key and the reboot button. Open the Start menu, press the shutdown button and, while holding down Shift key on the keyboard, select the option to restart the computer.

So we get to Wednesday Windows recovery 10. Here we first need the diagnostics section, then the additional parameters section.

All sorts of boot options will appear before us - by pressing the F4, F5 or F6 keys, you can get into the safe mode of the corresponding type.

Safe mode for a non-bootable system

If Windows does not start at all or, for example, a resolution that the monitor does not support is mistakenly applied, displaying a message about this on a dull black screen background, you can boot into safe mode and try to find a solution to the problem, as in the previous case, using the system recovery environment .

As mentioned above, pressing Shift+F8 while Windows is loading may not always work, so a more reliable way to get into the recovery environment is to boot from installation disk or from a file created earlier by standard system tools.

When booting from the latter, we find ourselves in the recovery environment immediately after selecting the language. If the computer is booted from the installation disk, click “Next” in the welcome window.

The next steps are “Diagnostics” and “Advanced options”.

In the window command line we write:

bcdedit /set (globalsettings) advancedoptions true

And press Enter.

The operation was completed successfully, close the command line and click continue in the action selection menu using Windows 10.

After which we will see a list of download options.

If in safe mode you can eliminate the reason that prevents booting, and you can avoid reinstalling the system, in the future the computer will always boot with a menu of boot options. It is very easy to fix this using the same command line, which we now open by selecting from the contents of the context menu on the “Start” button.

Enter the command:

bcdedit /deletevalue (globalsettings) advancedoptions

and press Enter.

That's it - now the computer will boot as usual, without any pre-boot states or menus.

Have a great day!

After upgrading to , many users ask how to start Windows 10 in Safe Mode. The thing is that it doesn't work in Windows 10 old way start safe mode. In Windows 10, you can't just select Safe Mode.

It is not clear why such a simple and familiar way to launch safe mode was removed. But you don't have to choose. We need to use what Microsoft offers us.

In this article we will describe three ways to start safe mode in the operating room. Windows system 10. The first two methods can be used in cases where Windows 10 is still loading. That is, you can boot and perform some actions within the system. The third method is for those cases when the system is so damaged that it refuses to boot in normal operation.

Starting Safe Mode Using MSCONFIG

If your computer still boots, then in a simple way To start Windows 10 in safe mode will be the System Configuration utility, also known as . To use this method, press the Windows + R key combination and enter the MSCONFIG command in the window that opens.

After executing this command, the System Configuration window should open. In this window, you need to go to the “Boot” tab and activate the “Safe Mode” function.

After this, close the “System Configuration” window by clicking on the “Ok” button and restart the computer. As a result of these simple manipulations, Windows 10 should start in safe mode. In order to disable starting in safe mode, you need to go to MSCONFIG again and disable this function.

Starting Safe Mode Using the Command Prompt

Another way Windows startup 10 in safe mode is . Open the Start menu and type search query"CMD" or "Command Line". Then click on “Command Line” right click mouse and select the “Run as administrator” menu item.

After this, “Command Prompt” will open in front of you with administrator rights. Now you need to run the command "" and restart your computer.

After the computer restarts, a menu will appear on the screen with a list of all possible modes Windows operation 10. With this menu you will be able to start Windows 10 in safe mode.

In order to disable the display of this menu, you need to go to the “Command Prompt” again with administrator rights and execute the command “”.

Starting Safe Mode Using the Windows 10 Disk

If Windows 10 does not boot, then you will not be able to use the methods described above to start safe mode. In this case, you will need a boot disk (or bootable flash drive) with Windows 10.

Boot from the boot disk. The first screen will ask you to select your language and other regional settings. Here we simply click on the “Next” button.

After this, a window will appear asking you to install operating system. In this window, you need to click on the “System Restore” button. This button is located at the very bottom of the window.

After this, go to the “Diagnostics” section.

Then open the “Advanced Settings” subsection.

Then open the command line.

After this, the “Command Prompt” window should appear on the screen. Here you need to enter the command that we already talked about above. Therefore, we enter the command “ bcdedit /set (globalsettings) advancedoptions true"and wait until a message appears about successful completion operations. Then just close the “Command Prompt”.

After closing the command line, click on the “Continue” button.

As in the previous method, disabling this menu is done using the command “ bcdedit /deletevalue (globalsettings) advancedoptions».

The developers of Windows 10 have provided for system recovery processes to take place in automatic mode, but they still retained the ability to enter safe mode. However, familiar to more earlier versions OS Windows method Login using the “F8” key no longer works in Windows 10.

How to activate a familiar function? What keys and buttons should I press when loading the OS to start in safe mode? Below is detailed description in various ways to boot Windows 10 in safe mode.

Enable Windows 10 to boot in safe mode via msconfig.

To do this you need:

1. Press the key combination “WIN” + “R”;
2. IN text area enter the command - “msconfig”;
3. Confirm by clicking “OK”;
4. Then in the menu that appears, open the “Download” tab;
5. Select the operating system with a single click of the left mouse button and check the box in the “Safe Mode” column;
6. Also in this window, the user can select OS boot modes; it is recommended to leave the “Minimal” checkbox by default;
7. Click “Ok”;
8. Ready. After restart Windows 10 should boot in safe mode.

Note: To start Windows in normal mode, you need to uncheck the “Safe Mode” box using the same instructions.

This may seem strange to experienced users, but it is very important not to confuse Safe Mode with and be aware of the differences.

Logging into Windows 10 in Safe Mode - Settings.

To restart Windows and open it in safe mode, you need to change the startup options. To do this you need:

1. Go to the Start menu;
2. Click “Options”;
3. Next, in the window that appears, go to the “Update and Security” tab;
4. Then in the menu that appears, open the “Recovery” tab;
5. Click the “Restart Now” button;
6. After that, click “Diagnostics”;
7. Click “Advanced options”;
8. Next, enter the “Download Options” menu;
9. Click “Reboot”;
10. Wait for the menu of additional options for starting the computer to appear on the monitor and, having highlighted the appropriate boot method, click on “Enter”;

Logging in safe mode allows you to solve many problems, such as when or you need to change tables, etc.

Reboot+Shift starts Windows 10 in safe mode.

The algorithm of actions consists of several sequential stages:

• Enter the “Shutdown” window through the “Start” button;
• Next, hold down “Shift” and click “Reboot”;
• Then using previous instructions restart the PC.

But all these methods work when you can log into Windows 10 and it starts up successfully. What should you do if problems, such as others, occur when logging in? Let's look below.

Login to Safe Mode if Windows 10 won't start at all.

If all the above methods did not help, then you need to use a removable installation media systems, boot disk or USB flash drive.

Algorithm of actions in this situation:

• Boot from a disk or flash drive by changing the startup settings in the BIOS;
• After downloading, select the “System Restore” section;
• Next, go to the “Diagnostics” section;
• Enter the “Additional parameters” subsection;
• Click “Command Line”;
• In the console that appears, type bcdedit /set (globalsettings) advancedoptions true
• Press the “Enter” and “Continue” keys;
• Wait for the additional startup options menu to appear on the monitor and select safe mode;

To restore the standard launch option, you will need to call context menu“Start” - “Command Prompt” and enter the command:

Bcdedit /deletevalue (globalsettings)advancedoptions

When you restart, Windows 10 will work normally.

Here are some simple ways to start Windows 10 in safe mode. If you have anything to add, leave comments below.