Setting up a Wi-Fi connection. Configuring your own Wi-Fi settings

Even if you have an agreement with a provider to gain access to the network, without correct settings The router will not be able to experience all the advantages of the service. Therefore, below we will describe in detail how the ZyXel Keenetic 4G is connected and configured.

Settings ZyXel Keenetic 4G in Windows

This router can work with various operators communications, including popular companies InterCom, MTS, Yota, Megafon, BeeLine and others. Service in some areas will require special firmware, which you can obtain by consulting with technical specialists. When the device is completely ready, connect it to the computer and network:

If the instructions for the device are available, be sure to familiarize yourself with its contents. We connect the router to an outlet, antenna cable place it in a USB connector, and connect any of their LAN ports with a yellow cable to network card system unit our PC (or the corresponding laptop socket).

• open “Start” and go to “Control Panel” -> “Network Connections”;
• select “Connect via local network”;
• go to “Properties”;
• Click on “Internet Protocol (TCP/IP)”, a new window will open;
• leave marks in the form of dots opposite the two selection options: “Obtain an IP address automatically” + “Obtain DNS”;
• in all open windows Click “Ok” to save the changes.

Configuring the Zyxel Keenetic 4G router via the web interface

The functions of the router itself are available to the user through a web interface, which can be easily opened from a browser. To do this, enter 192.168.1.1 in the address bar and specify the login\password – admin\admin (the passcode can be 1234 or another specified in the documentation). Next, we will be greeted by a page that will notify that the Internet has not yet been configured:

• at the very bottom of the window, click on the “web configurator” button;
• select “cancel” to set a new login and password;
• go to the USB tab;
• Click on the “Technology” link in the “Modems” section;
• in the new window, leave the “Enable” and “Use to access the Internet” checkboxes;
• select the current telecom operator and access point;
• click “Apply”.

If everything is done correctly and the router has started to distribute Internet access, the icon depicting a globe at the bottom will light up green.

How to set up a ZyXel Keenetic 4G router if you can’t connect

After carrying out the manipulations described above, our devices should work as usual and assign an IP address to the computer. You can check this in “Local Area Network Connections”. If there is a “DHCP assigned/enabled” mark here, then the router has successfully assigned an internal address to the PC (for example, 192.168.1.23). If this does not happen, most likely the problem is with the DHCP client. The reasons for this can be completely different; it’s easier to enter the appropriate values ​​in manual mode. To do this, in the window from the first paragraph of the article (Internet connection->”Properties”->TCP\IP) you need to uncheck the items automatic receipt and enter IP – 192.168.1.101, subnet mask – 255.255.255.0, gateway – 192.168.1.1, DNS – 192.168.1.1. We save the data and reboot if necessary.

To dot all the settings ZyXel modem Keenetic 4G, watch the video with review and comments:

This article will focus on the Zyxel Keenetic 4G router. It is necessary to work with the Internet such as 3G and 4G. Thanks to it, you can easily combine several computers into one network. Further let's talk about the intricacies of connection given device, about its settings, firmware and the like.

Appearance

This the model is very similar to its predecessors. The surface of the router is made of glossy plastic . He white. On the sides the manufacturer used gray shades. On the front panel you can see indicators that have been replenished with additional 4G. Due to the fact that the device has compact dimensions, it has only 3 ports. Ventilation is carried out using grilles. They can be seen on the side panels.

What is needed to connect?

In order to connect the device, you need use a router, power supply, antennas For signal catcher, patch cord, extension cord and instructions. IN the kit also includes a compact - a disk that contains everything necessary software. In order to connect and configure Wi-Fi Zyxel Keenetic 4G router, should observe the following instructions .

Connection instructions

Needs to be connected to the device antenna, connect it to the network, as well as to the Internet provider. Necessary insert the adapter into net , and the cable providing the signal is connect to the computer. Antenna should be raised. Router needed install either on a table or on a wall . For the latter option there is a special mount. Thanks to the USB extension cable that comes with the kit, you can install modem this way to The quality of the internet received was the best. So that the device did not interrupt its work in emergency mode, you need to make sure that side panels completely free , are not covered by anything. Then the device will be fully ventilated.

Wizard setup

How to setup router Zyxel Keenetic 4G 3? The process will the same as with any other modification.

If the consumer has no experience with setting router, then you need to start it withInstallation Wizards. To fully provide for yourself stable internet, need to run device with factory options . The connection should be established in automatic mode. This will avoid long reading the instructions and trying to understand device . For that to launch the Wizard, necessary use the disk which comes included. It has software. He will offer the consumer necessary instructions. Below we will consider configuration via a web browser, which is an alternative method.

Setting up via browser

How to Zyxel Keenetic 4G via browser? To do this you need to open the software. Needed in address bar Enter the name of the manufacturer's website. "Quick Setup" will open. If a dialog box appears in which it says that the Internet cable is not connected, then you need to install it in a special connector. It is highlighted in blue. After this, the browser should click “Next”. The system will immediately start checking the received signal. Users will see the following window, in which they must enter the address MAC type. If the provider does not use them, then you need to select the item that corresponds to this operating mode. After this, you should move on to manipulating the IP address. Settings this parameter must be set to automatic. If the provider uses a static IP address, you should select manual acquisition. After this, you must enter all the data that the supplier indicates in the documentation. Next a dialog box will appear. You must enter your login and password. They are set by the provider. After this, you should select the connection protocol, and you can immediately complete the process.

Use as a repeater

Wi-Fi repeater is a device that helps broadcast the received signal over a large area. How use this device in this mode? To, you must follow the instructions. Need to go to 192.168.1.1 in your browser. After this, you should go to the Wi-Fi client and select network overview. You must select a network from the list , to which it will be carried out connection . Last step is choice key for received signal. It's about about the password. After that remains just reboot device .

Working with Wi-Fi

To operate the device as wireless point access, necessary go to the “Internet” section. This is done in the control panel. Further need to open Wi-Fi menu. In the “Operating mode” tab need to create wireless network. For this should be pressed to the “Access Point” section. Right here need to be asked the name of the network, as well as the level of protection. You must select the maximum one from the drop-down list. This is followed by come up with a password. Next you need to click “Apply”, and now you can use an access point.

Firmware

Many consumers advise immediately updating the device after purchasing it firmware . You should switch to the official one website , where you need to download the installation file . In such a situation, the question arises: “How to configure the Zyxel Keenetic 4G III router?The instructions are below, they are the same for all modifications.

Need to come in to the web interface, to the “System and Configuration” tab. It's downloaded there a new version firmware. Further let's go in to the firmware file. A dialog box will open. window , in which there will be window "Control". Here you must specify path to the downloaded firmware. Further should be pressed "Replace". The update process will begin and necessary wait for it to finish. The power cannot be turned off; the installation must be completed completely. Otherwise device may break.

Setting up for Rostelecom

In the reviews you can stumble upon something that is sometimes not clear how configure settings for certain providers. Let's consider the necessary changes to the options For Rostelecom. Should choose connection type PPPoE. How to do it?

Need to come in in the “Internet” menu, section “ Connections " Next you need find the IP address settings , there will be an item “Without addresses " If the contract with the provider contains a specific list of data servers like DNS, then you need to fill in the fields. If used dynamic type servers , then the column should be left empty. The same applies to filtering by MAC address . If the provider assumes them application, you must click “Use address from computer”. If the device , through which the connection is made, will work with the Internet, then necessary in the dialog box that appears, indicate address local network. Further you need to apply the settings and save them.

Now you need to change authorization parameters. Need to open the "Internet" menu. For that to use a specific type of protocol, necessary check the box next to the desired function. To do this, you need to specify the authentication method after . Respectively, should enter your login and password. In the access protocol, select Service and Hub Name Can leave blank. If the provider this information is provided, then you need to fill out this field (optional). Next, you need to enter the login and password used by the supplier and apply the changes.

Now none of our readers will have the question: “How to set up a Zyxel Keenetic 4G router»?

Do you often use the Internet at home? It seems the question is completely out of place, modern man It is almost impossible to imagine without a smartphone connected to the network. However, at home, you want high speed, allowing you to download large files, while spending minimal amount time. Routers come to the rescue and today we have ZyXEL review Keenetic 4G III, which will provide your home fast Internet and will protect users from unwanted content. Let's take a closer look at this device.

ZyXEL Keenetic 4G III review

Contents of delivery

The device comes in a compact blue and white package on which you can find all the necessary information. At the time of writing the review, the average cost of the ZyXEL Keenetic 4G III, according to the YandexMarket service, was approximately 2,000 rubles. Package Included:

• Router ZyXEL Keenetic 4G III
• Power adapter
• Operation book
• Warranty card

I was pleased that all necessary information, which an inexperienced user may need, is detailed on the box itself.

Characteristics

• Processor - MT7628N 575/580 MHz
• Standard wireless communication- 802.11n, frequency 2.4 GHz
• MIMO support
• Max. speed wireless connection- 300 Mbit/s
• Information security - WEP, WPA, WPA2, 802.1x
• Switch - 2xLAN
• Port speed - 100 Mbit/s
• Repeater mode
• Quantity USB connectors 2.0 Type A - 1
• Guest network
• IPv6 support
• Firewall
• DHCP server
• Dynamic DNS support
• VPN pass through support
• VPN tunnel support
• PPTP support
• L2TP support
• IPSec support
• Quantity external antennas- 2 x 5 dBi
• Web interface
• Telnet support
• Volume random access memory- 64 MB
• Flash memory capacity - 8 MB
• Possibility of connecting 3G/WiMAX/LTE modem
• IEEE 802.1q (VLAN) support
• Flash memory
• Dimensions (WxHxD) - 140x30x110 mm
• Weight - 170 g

Appearance

ZyXEL Keenetic 4G III has a compact size and is made of black plastic. The build quality is pleasantly pleasing.

On the front panel of the device there are four illuminated symbols that indicate the status and mode ZyXEL works Keenetic 4G III.

On the top edge of the Internet center there is a button Wi-Fi control(WPS/on/off). Here you can also see information about the capabilities of the ZyXEL Keenetic 4G III.

On the bottom edge of the device there are two rubber feet and two clips for hanging on the wall. In the center there is all the necessary information about ZyXEL setup Keenetic 4G III.

On the back panel of the ZyXEL Keenetic 4G III there are all the connectors necessary for operation: Internet, Home Network, USB, Reset, power. All connectors are labeled and highlighted in a separate color, which allows you to avoid mistakes even by the most inexperienced users.

On the side edges there are ventilation holes in a pixelated design. Direction-adjustable antennas are also installed here.

Generally speaking, the ZyXEL Keenetic 4G III has a nice design that will fit into the interior of any workspace.

Settings and functionality

ZyXEL Keenetic 4G III operates on the basis of an energy-efficient Mediatek processor MT7628N (575 MHz) in tandem with operating system NDMS 2. This processor I have already managed to show my good side.

In addition, it should be noted that the device can be controlled and configured using a free mobile application, which allows even the most inexperienced users to quickly and easily configure the ZyXEL Keenetic 4G III

The mobile application allows you to remotely control the ZyXEL Keenetic 4G III and configure all the necessary parameters.

The router setup menu is divided into many tabs, which makes it possible to approach all settings more carefully.

The mobile application allows you to quickly set up the Internet, which greatly simplifies most tasks.

ZyXEL Keenetic 4G III also supports USB modems, which allows you to use this router in your office. This feature allows you to minimize Internet costs while maintaining the same speed.

Speed ​​tests

Transmission speed LAN data shows better results than LAN-WAN. However, despite this, it remains very high and will be sufficient to work in the networks of our providers. The speed is approximately 150 Mbit/s. Considering that most providers do not provide users with Internet speeds above 100 Mbps, ZyXEL Keenetic 4G III will be the ideal solution for your home.

Results for ZyXEL Keenetic 4G III

To summarize, it should be said that high speed connections will allow you not to think about anything. An excellent security system that can protect your children from various banners with obscene content, thanks to the " Safe Internet", which allows for separate filtering of connected devices. The ability to control the ZyXEL Keenetic 4G III using a mobile application opens up new opportunities for users. In addition, it should be noted that you can automatically restart the USB modem if it freezes. You can install new updates also using a mobile application and do it remotely. All this for a low cost. The choice is yours, we can only show and tell.

Keenetic 4G is a router designed to create an Internet connection using 3G and 4G networks. It allows you to combine single network several computers or other devices located within the coverage area of ​​a particular cellular operator.

In this article we will look at all the intricacies of connecting this router for each of the popular providers, talk about its configuration, firmware and others important points that the user may encounter while working.

Appearance

As we look at the model as a whole, it is very similar to its predecessors. The top of the case is made of white glossy plastic, which turns into gray on the sides. On the front panel there is standard set indicators, which were replenished with one more – “4G”.

The dimensions of the device are compact, so it only has 3 Ethernet ports (for WAN and LAN). The router is ventilated using grilles located on the side panels.

Connection

Let's start connecting. First, let's look at the configuration of this model. It includes:

To connect and install Zyxel Keenetic 4G, do the following:

Attention! When installing the router, make sure that the side panels are not blocked by other household items to ensure proper ventilation of the device.

Setup via Wizard

Let's start setting up the ZyxelKeenetic 4G router through the wizard. It allows you to start the device with factory settings and establish a connection automatically, without spending a lot of time reading instructions and trying to delve into technical details.

To start it, just insert the disk that comes with the device into the drive and follow simple instructions. An alternative this method is quick setup via a web browser, which we will look at below.

Configuration via browser

Let's move on to setting up our connection:

Attention! When using a static IP address, you must select to obtain it manually and enter all the necessary data, which can be found in the documentation from the provider or obtained from the service technical support.

1. enter the login and password received from the provider;
2. Next, you need to select a connection protocol - it will depend on the service provider ( detailed information about connection for each of the popular providers, see below);
3. we complete the process.

Video: Review of 3G/4G router ZyXEL Keenetic 4G

Setting parameters for providers

Let's look at connecting and setting up the Zyxel Keenetic 4G router for each of the popular providers. In each specific case, this process is slightly different.

Remember! In different regions, the same provider can use various protocols connections, so check this information before you start setting up the connection. The protocol type is usually specified in the documentation issued by the service provider. You can also contact technical support with this question.

Rostelecom

For the Rostelecom network we will need to establish a PPPoE connection.

This is done as follows:

Now you need to configure authorization parameters:

Beeline

To configure the Internet center to work with the Beeline network, we will need to understand the L2TP connection type.

To configure its parameters, do the following:

1. go to the “Internet”, “Connection” menu;
2. in the “Configuring IP parameters” column, set manual or automatic;

Attention! For manual type settings, you will need to specify the IP address, main gateway, DNS server addresses and network mask. All this data is provided by the provider in the connection documentation or can be clarified by technical support. Also, if you want to specify DNS server addresses manually, uncheck the box next to the option to automatically obtain them and enter the data manually.

1. when using filtering by MAC addresses, go to the “Use MAC address” column;
2. select “From a computer” and the current IP (by selecting the option “The entered address can be entered manually”);
3. click “Apply”.

Megaphone

If you use the services of the Megafon network, the connection will look like this:

1. open the “Internet” menu and select the appropriate item;
2. we set the use of the 802.1x protocol if your provider uses it (you can find out this information from the documentation or from technical support);
3. type of authorization using login and password;
4. specify the current IP address or PPTP domain name as the server address;
5. enter your login information (username and password) and save the changes.

Video: WiFi router Zyxel Keenetic 4G

How to set up a Zyxel Keenetic 4g router for Yota

This router model is a certified participant in the “ Yota Ready", which means that to get started you just need to connect the modem to the router. So:

• connect the modem for automatic connection to 4G Internet;
• launch the browser and copy “192.168.1.1” into the address bar;
• We indicate the username and password, after which we get to the main menu and get to work.

4G: plug and play

How to set up 4G for other providers? It's also very simple:

Repeater mode

Wi-Fi repeater is special device, which helps to broadcast the signal further, that is, to increase its coverage area. How to turn our router into such a device?

Let's describe this procedure step by step:

After this, all devices connected to the router will have access to this connection.

The local network

When connecting the router via a local network, we go through the following steps:

WiFi

To set up wifi, we need:

Firmware

Do you need to update your device firmware? To do this, you will need to download the firmware file from the official website and then install it.

This is done like this:

Attention! During the firmware update, do not turn off the power, wait until the installation is completed and the device reboots.

Reset

Next, we will tell you how to reset this router. The need for this arises when errors and failures appear that interfere normal operation devices. Restoring the router to its factory settings is not difficult at all.

For this purpose, there is a “Reset” button, which must be pressed for a few seconds. The router will reboot, and all its settings will return to the factory default settings.

Important! When you restore the default settings, all changes you made while working with the router will be reset. You should resort to this procedure only as a last resort, when other ways to solve the problem do not help.

ZyXEL KEENETIC 4G II is an excellent router from a well-known manufacturer. It stands out as beautiful technical characteristics, interesting design, as well as compact sizes. Its main purpose is uninterrupted access to world wide web with help cellular networks 4G communications using popular USB modems. It is able to combine everything in the house into one network computer equipment and mobile accessories. You can play online games on your smartphone, tablet, PC and laptop. The main condition is the presence of a 4G network from one of the mobile operators.

The router is designed to work with mobile modems

The ZyXEL KEENETIC 4G II router is very easy to set up, because it has friendly firmware installed in relation to even an unprepared user. For guest devices, you can provide access to the global network, while limiting access to information located on the home local network. ZyXEL has managed to release an excellent router that you can configure the way you need it. To prevent anyone from connecting to your network, you can set a security password. The device has a powerful firewall. It will not allow an attack on your gadgets, which can be organized via the Internet.

The device from ZyXEL will give you the opportunity to access the World Wide Web via a dedicated Ethernet line. Thanks to this, you will be able to participate in file-sharing networks, as well as use all kinds of entertainment resources from your provider.

The main advantages of the device

The router from ZyXEL can be configured to work with one of 60 famous models of USB modems without additional utilities and complex adaptation. The advantages of the device include:

• MIPS® 24KEc processor, which operates at 360 mhz;
• setup in a few steps;
• you can set a password for the Wi-Fi connection;
• operating speed in mobile networks up to 30 MB/s.

Another advantage of the device is the availability of technology ZyXEL Link Duo. Thanks to it, it is possible to configure access of all gadgets not only to the Internet, but also home network over one dedicated line. If necessary, you can perform port forwarding both manually and automatically. This will allow you to fully recycle your devices on file-sharing networks.

Setting up the device

You need to configure the ZyXEL router through a special web interface. Open any of the available browsers and indicate the IP address of our device in the address bar - 192.168.1.1. After a new window opens, enter admin in the “Username” line and 1234 in the “Password” field. This is a standard value preset by the developer. Before proceeding with the settings, we recommend downloading from official resource global network ZyXEL company has the latest software. If there is one, then it needs to be installed. Router firmware is needed to ensure that it works more stably and is protected from hacking attempts from the World Wide Web.

We update the device software and configure it

To begin, select the menu item “System” - “Firmware” and click “Browse”. In the window that opens, you must specify the path to the firmware file, then click “Update”. It will take some time to complete the process. After the update is completed, the router must be rebooted. At the moment when the software is being updated, it is forbidden to turn off the PC and the device from the outlet. This may damage the router.

Settings ZyXEL router for working in 3G and 4G networks is very simple. In the “System” - “Operating mode” section, you must select the appropriate operating mode:

• via 3G USB modem;
• via 4G USB modem;
• via Wi-Fi;
• over a dedicated Ethernet line.

Having chosen to work from a 3G modem, in the appropriate section you need to indicate your operator, enter your phone number, APN name, username and password. The latter should consist of as many characters as possible. Click “Apply” and reboot the device. If you recycle Ethernet network, then you can access the World Wide Web using the popular protocols PPPoE, PPTP or L2TP. After the desired protocol has been selected, we will need to enter the server address, password, and user name. All this information must be obtained from your provider. The remaining parameters can be left as default. That's it for the setup of this connection It will be completed.