Setting up an MTS TV satellite dish via phone. Setting up an mts satellite dish

Twitter

MTS TV is the name of a new operator that provides its customers with high-quality digital television and access to the 3G and 4G Internet network. The channels are broadcast thanks to the ABS2 satellite, located at 75 degrees east longitude.

The satellite's operation is characterized by a wide coverage area: Russia, Europe, the former CIS countries, Africa, the Middle East and the Asia-Pacific region. Mobile TeleSystems cover more than 90 percent of the entire territory Russian Federation. The company provides full access to channels High Quality, which are on this moment more than 245. Most of them have HDTV clarity.

Attention! MTS TV appeared after the Rainbow package left the market and promised to provide connection benefits to all subscribers of this package.

Television from Mobile TeleSystems– this is excellent quality of all channels and access to high-speed Internet. The MTS satellite TV equipment package includes a SIM card for 3G and 4G networks, so you can use the Internet only in the coverage areas of these networks. If the signal level required by the receiver is insufficient, a connection is made external antenna For increased intake 3G and 4G networks.

The receiver can act as a Wi-Fi router and distribute a signal to several connected gadgets.

In parallel with this, satellite TV from MTS provides the following services online:

weather;
list of public services;
popular social networks;
exchange rates, etc.

This is very convenient, because now, right in front of the TV, the company’s client can communicate via social media, pay the bills mobile phone and even enroll your child in some club.

Satellite TV can also be used as multimedia device for viewing and listening to audio, video and photos. For the convenience of users, large catalogs with various interesting materials have been created.

Registration in your personal account for MTS satellite TV

Experts recommend creating a personal account ( Personal Area) to control personal account, activation and deactivation of packages satellite television. To log into your personal satellite TV account from MTS under a contract, the client is recommended to call the number and ask for a connection to the satellite TV support service. Here the subscriber will be asked to provide personal passport information and the employment agreement number. To confirm the success of identification on mobile number The subscriber will receive a notification with a password to log into the account.

Do-it-yourself MTS satellite antenna installation

For good reception channels, the antenna must have a signal from the customer’s windows. Since the satellite is located in the southeast, the antenna is aligned in this direction. Do not forget that trees, high-rise buildings and similar-sized buildings can significantly weaken the signal level. To avoid similar problems Pre-measure the signal from the subscriber's windows to the satellite.

If the windows face opposite direction, the antenna is mounted on the roof of the building. In this case, residents of high-rise buildings require permission from several authorities.

Instructions for self-installation satellite TV from MTS claims that residents of private sectors can equally install the antenna both on the side facing the satellite and on the roof of the house.

Many users find it difficult to understand how to configure satellite dish MTS. This procedure indeed requires certain knowledge and skills and includes several step-by-step processes:

antenna rotation;
plate tilt;
turning the converter.

Today the MTS company, in addition to services mobile communications and the Internet, offers customers to enjoy watching TV shows via satellite TV. Digital television of this operator capable of working both in urban environments and in populated areas out of city. Almost the entire territory of our country falls under the MTS coverage area. This means that setting up an MTS satellite antenna at home can be done in every region of Russia. This fact confirmed by successful work over the course of 2 years.

Priority parties

Installation and configuration of MTS home satellite dish guarantees the user:

high-quality signal regardless of the location of the system installation, be it a city or a rural area;
quick and easy installation, without any technical difficulties;
use of a convenient package of channels, which includes sports, educational, entertainment and news channels;
a compact modification of the set-top box with many functions, capable of supporting signals in HD format and controlling angles using a 3G modem;
management of telecommunication parameters using the built-in WI-FI points without additional devices;
management of Smart TV service mode mobile traffic With high speed 1GB in size;
the presence of a recording option that allows you to record a program without reference to a set time.

To use the listed opportunities, you need to opt for MTS TV. You will also need to properly configure the installed equipment.

Set of MTS TV system devices

The MTS television system, like satellite television of other operators, consists of a certain set of devices and materials. The kit includes:

receiving device - this can be a set-top box with a 3G modem for connecting to the Internet, a TV set-top box capable of receiving HD signals, and a modular TV device;
satellite dish;
converter device;
fastening elements for mounting the antenna;
cable products to the antenna.

When the package is completely assembled, you can install the plate and try to configure the system. To do this, you can seek help from specialists or try to do it yourself.

Preparation stage before installation

Before you install a satellite TV system yourself, you need to carry out preparatory steps. These include:

establishing the location of the satellite using the “SatFinder” application, downloaded from mobile service store;
determination of mechanical obstacles in the path of signal reception – better plate install on the roof to allow rotation around its axis and reduce the influence of physical obstacles on the signal;
completing the system configuration.

In addition, you need to prepare:

plug connectors;
installation tool;
hardware products for fastening antenna elements.

We need to pay attention! Experts recommend buying standard set devices and materials offered to customers by MTS. This will make it easier to assemble the system.

Installing the plate

The antenna installation algorithm is as follows:

In choosing a place to mount the plate. It needs to be mounted on the wall so that it is possible to freely direct the mirror to the south, since our country is located in the northern part globe. If the dish is mounted on the roof, then you need to make sure that the view is not blocked by taller buildings and trees;
In assembly. On a flat and clean area, assemble the plate structure, securely connecting the elements together, according to the manufacturer’s instructions;
In marking the place for attaching the bracket and drilling holes, and in fastening the bracket;
In consolidation satellite mirror to the installed mounting unit. The antenna should not be completely clamped with bolts, as it will have to be rotated to improve the quality of the received signal;
Assembling the converter, pointing the head at the satellite and connecting of this element cable with TV set-top box.

Setting up system equipment

After the antenna setup is completed and the dish is pointed at the satellite, you need to move on to setting up the TV equipment. To do this, you need to connect the set-top box to the TV using TV cable and plug. If the system includes a cam module, then you need to insert it into a special connector on the TV without an access card.

The MTS TV set-top box is configured independently using this algorithm, you need:

insert the SIM card into a special “slot”;
carry out initialization and analysis of the 3G signal until the process is completed;
undergo equipment authorization - before the operator receives the original signed documents, the channel viewing service must be open within 5 days;
create a user profile - in the “Access Level” section, indicate age and create an access code;
search for TV programs - at the end of the process a list of found channels should be displayed.

It is important to know! It is better to configure MTS satellite TV under the supervision of a specialist. He will tell you how to properly improve the signal quality and set channel parameters. You also need to remember that authorization of the system is carried out in two ways: through an SMS message or a call to the operator.

Method for setting up a cam module

The procedure for setting up this type of equipment consists of the following steps:

Disconnect TV receiver from electrical network;
Insert the element into a special port - before installing the cam module, you should carefully examine the contacts of the port and connector; they should fit together easily;
Install the smart chip into the TV module with the side with the code facing the sticker with the TV logo;
Connect the TV to the electrical network and make sure from the information on the screen that the system is assembled correctly;
Enable signal reception mode in formatDVB— S2 and configure the following characteristics to watch satellite channels:

satellite name – ABS2;
modulation type – DVB-S2, 8PSK;
reference/home transponder at frequency – 11913MHz;
LNB local oscillator at frequency – 10600MHz;
set LNB polarization to linear-vertical position;
set the symbol rate to 45 Msymb/sec;
LNB power supply must be in “on” mode;
22KHz tone should indicate "on" mode;
select “fast” or “network” search option.

To set the TV to home digital MTS channels you need to select a mode DVB-C reception signal and perform the following actions:

select “network” or “fast” search;
set the frequency of the received signal at 298000KHz;
select QAM64 modulation;
set symbol rate mode.

Setting the above parameters will allow you to correctly configure the satellite dish and get a high-quality picture on the screen along with sound. If this does not happen, then you need to call the support service and consult with specialists.

What you need to do before buying satellite TV

Kits satellite broadcasting beckon with a pleasant price, everyone who makes purchases in shopping center, or goes to corporate cell stores MTS, we have long seen advertising signs about satellite television with attractive prices. On New Year's Eve, the cost of the kit in St. Petersburg and Leningrad region was 2990 rubles. If we compare it with the popular provider Tricolor, the cost is more than double. The first thing you need to do is determine whether you can install satellite television. We download an application with a compass to our smartphone, set it up, and check in which direction we need to adjust it, namely 75 degrees east longitude. It will also be convenient to use the SatFinder application; in the settings you need to select ABS 2 - 75 E. It is important to note that there should be no tall trees or houses in the direction of the satellite, at a distance of 150 - 200 meters. Thanks to the data obtained, you can easily determine whether it is possible to install television in your home.

The cost of installing an MTS satellite television set is 2990 rubles

Included in the price – installation, mounting for bracket, wiring open method, assembly, installation, antenna tuning. The cost of departure is 30 rubles/km.

2. What tools are needed for installation

We have a freshly purchased satellite television set, cable, set-top box or cam module. You can start installation. But before installation you need to check if you have everything necessary tools. What do we need?

Open-end wrenches for 10 and 13. They will be needed for assembly and its settings. Assembly is carried out according to the diagram attached to the kit. It will be more convenient to use wrenches with ratchets.
A knife, any construction or kitchen knife is suitable for installing F connections on a coaxial wire.
A hammer drill or screwdriver for installing the bracket on the wall of a building.
A building level, or an excellent eye, the bracket must be installed strictly vertical to ground level. It must also be very tightly secured so that it does not come off.
All necessary fasteners to install the bracket to the wall. For brick wall great solution There will be installation of plastic dowels, for wood, plumbing bolts with a head of 13, and a length of 600 mm.
The Satfinder device is best rented or purchased, you need to take into account that cheap analogue dial instruments have poor sensitivity, and it will not be possible to accurately adjust them.
Patience is probably the most important thing you need. Be prepared for the fact that you may not be able to adjust the antenna the first time.

3 .How to set up an MTS antenna for a satellite

There are two ways to set up a satellite dish, the first is using a set-top box, the second is using a satellite finder. Let's figure out which method suits us. The converter rotation angle is -22 degrees for the Leningrad region, in both cases settings.

1 Antenna setup using the set-top box

First of all, we connect the antenna and the set-top box using a pre-prepared coaxial wire, with F connections crimped at the ends; we connect the TV and the set-top box with an HDMI wire. We connect the TV and set-top box to the network, and turn on both devices. The green LED on the console should light up. Next, go to the Settings Menu, 2 parameters will be displayed there: signal strength and signal level, the first shows whether you have connected correctly coaxial cable To satellite converter, the second displays the signal strength. If the signal level is 95%, we begin to slowly rotate the plate with the hope of obtaining the maximum signal level. In this case, the TV must be in the field of view of the tuner, which is not always possible. The disadvantage of this method is that you will tune in using one transponder located on the satellite.

2 Setting up using a professional device

To configure using the device, we will need a 2 meter coaxial wire, with crimped F connections, one end of the wire is connected to the device, the other to the satellite converter. In the device we select satellite dishes, just like in the first case we will have 2 scales, but in addition we will have the ability to select transponders, thanks to this we can configure the dish with the highest quality possible. There is only one downside to this method: it is possible to drop the device for tuning, and get into an unpleasant situation if you rented it. Since its cost is not comparable to the cost of installation by a professional.

4. How to configure the satellite CAM module

Buying CAM module MTS, the first thing you need to start with is to make sure that your TV supports S2 encryption and whether it has the ability to connect a module. For each brand of TV, there are many ways to install a cam module, from automatic to manual. Let's consider manual using the example of a Samsung TV, which does not have auto mode for the provider.

1 The first thing you need to do is reset the TV to factory settings, go to the support menu item, select reset, and perform it.

3 Now select the LNB item, here we need to set the upper frequency to 10600 and the lower to 9750, the 22KHz tone is turned on, the polarization is linear, save.

4 Go to the manual setup menu and select create a transponder. A menu with the characteristics of the transponder will appear, then enter the following characteristics: Frequency 11913 MHz, data transfer rate 45000 Ks/s, vertical polarity, then save.

5 We get back to the satellite search menu, here you need to enable network search - this is required condition! If you did everything correctly, a percentage display of the signal quality will appear, click search and enjoy watching satellite TV. If something doesn’t work out, repeat all the steps starting from the first point.

5. Choosing a master

We advise you to pay attention to the guarantees provided by the professional who undertakes the work of setting up and installing your satellite dish. Professionals in St. Petersburg and the Leningrad region will warn you that the chances of a successful installation are extremely low. Statistics from our company: out of 10 orders, it turns out to deliver only 2, which is equal to 20 percent. Our company provides a lifetime installation guarantee

6. Pros and cons of MTS satellite television

Let's look at the pros and cons of television; let's start by focusing on the pros.

1. The price is tempting; there are no satellite TV sets on the market at more reasonable prices.

2. Cost subscription fee only 1200 rub. per year, which is cheaper than Tricolor TV.

3. Good support and service.

Cons, how could we live without them?

The most important disadvantage in St. Petersburg and the Leningrad region is installation, since the satellite is located very low, compared to e36, it is often simply impossible to configure. The way out of this situation is installation on the roof, but not everyone is ready to pay for such work, since the price tag can exceed the cost of the kit by 3-4 times.

7. List of MTS transponders, broadcast frequencies

11740 V 43000 FEC 5/6

11800 V 45000 FEC 2/3

11860 V 45000 FEC 2/3

11913 V 45000 FEC 2/3

11980 V 45000 FEC 2/3

12040 V 45000 FEC 2/3

12100 V 45000 FEC 2/3

12160 V 45000 FEC 2/3

The satellite television operator MTS appeared quite recently, but is already loved by subscribers due to the low cost of connection, a large list of programs and inexpensive subscriber services. But the stability and reliability of the system depends largely on high-quality installation and qualified configuration.

Visibility in a south-eastern direction and a clear horizon are the main conditions for connecting an MTS television set.

The channels are supplied from the ABS 2 satellite, hovering at 75 degrees East longitude. To view programs you will need:

Antenna size 60-90cm.
Linear converter.
Coaxial cable.
Connectors.

Moscow and the Moscow region are in the zone confident reception satellite Standard size antenna is 60cm. By increasing the dish to 80-90cm, it will be possible to achieve stable signal reception in bad conditions. weather conditions: snowfall, rain, cloudiness. The section "Coverage map" presents the signal distribution throughout the Russian Federation and indicates the reception power in each region. The map will help you choose the plate size.

We will divide the installation and configuration procedure of MTS TV into several stages.

Stage 1. Determining the direction of the signal

The procedure can be performed using a compass or a program from the Internet. For a PC, DISHPOINTER is suitable; for a phone, you can use the SATFINDER program (you can find it at Play Market or App Store). The operating algorithm is as follows: enter the address of the installation location, select the name of the satellite (ABS 2 75EAST) and using the colored arrow the signal from the satellite will be shown relative to the connection location.

If we choose a compass, then we focus on the southeast. The program shows a more accurate signal direction superimposed on a map of the area. Depending on the direction of the signal beam, the antenna can be installed either from a building window or on the roof. Tall buildings and trees located at the level of the dish can interfere with reception. You can also navigate by the sun: around 10 o’clock in the afternoon it shines in the direction of the satellite.

Attention! Only a specialist, after visiting and measuring the signal, guarantees satellite reception! The cost of the service is 1000 ₽.

For independent measurements, we use a satellite set-top box, which has a scale for the level and quality of reception.

Stage 2. Assembly and installation of the satellite system.

We assemble the plate and install the converter on it, strictly following the attached instructions. We attach the bracket to the vertical wall of the facade or the roof of the building. Installation to brick and concrete surfaces is carried out using M10 anchor bolts, to wooden surfaces - 10mm screw caps. When there are voids in the wall, a through hole is drilled and studs are installed.

The antenna is mounted on a securely fastened bracket so that the dish is difficult to rotate on the support. We measure the required length of the cable, strip it as in the photo, and install the connectors. We pay careful attention to the cable braid: it should not come into contact with the central core.

We align the antenna in the direction of the satellite (use the program) or in azimuth (direction to the satellite in the horizontal plane) and elevation (the angle between the horizon line and the direction to the satellite in the vertical plane). Data for the Moscow region: azimuth: 137.3°, elevation angle: 18.3°. We find information for your region on the GEONAMES map.

Stage 3. Setting up the antenna for the satellite

This operation can be done using a sat finder or receiver. Recommended MTS receivers have a signal level and quality scale adjusted to the desired frequencies. Channels can also be received on non-recommended devices, but then it is better to configure the set-top box in advance. This can be done when purchasing a system in a store, or from neighbors who have a working MTS dish.

Manual setting performed using the following data:

Satellite ABS 2 75 EAST
Feed settings: upper local oscillator 10600 MHz, lower 9750 MHz.
Transponder: 11800 V, flow rate 45000, error correction 2/3. (see list of MTS frequencies)
Network search- included. This will help you find the entire list of programs.

We enter the settings menu, two scales appear in front of us: level and quality of reception. Stable work satellite is possible with the maximum filling of the scales, which should not be lower than 70%.

The procedure for setting up an MTS TV dish to a satellite

We point the antenna at the area where the satellite is located (we are guided by azimuth and elevation, according to the signal direction program).
We tilt the plate below the horizon by -8°.
We set up the converter: if you look at the feed from the antenna side, then with a positive value we turn it clockwise, with a negative value counterclockwise, to the -22° mark.
Slowly turn the antenna 1-2mm, wait a couple of seconds, look at the signal scales on the screen; repeat the operation until the scales begin to fill.
We achieve at least 70% completion of the scales.
Fix the plate, tighten the bolts Call an MTS setup specialist

If you were unable to set up the equipment yourself or there were breakdowns in the already connected antenna, we recommend using the services of MTS television repair and installation specialists.

Call an MTS setup wizard

If you were unable to set up the equipment yourself or there were breakdowns in the already connected antenna, use the services of MTS television repair and installation specialists.

Modern technologies allow a person to gain weight useful information while watching a variety of TV channels. MTS TV is one of the representatives of satellite television.

In most cases, the installation and configuration of a satellite dish is carried out by specialists. But there is a category of people who want to independently arrange an antenna and set up a TV set-top box. It is for them that the article’s material will be useful.

Before installation

Before purchasing an antenna, you need to make sure that there is a good satellite signal in your area. We look at the map: if the satellite coverage area in your place of residence is light red, you will need a larger antenna. There are cases with weak signal, if the antenna is located outside the Russian Federation.

For those lucky ones who live within the satellite's visibility range, there is special application SatFinder. With its help, the desired direction of the antenna is determined. Information about the exact direction of the antenna towards the satellite allows you to detect obstacles to the signal in the form of high-rise buildings or trees. The application can be downloaded from the AppStore or Google Play.

Useful advice: It is best to install the antenna on the roof of the house. This arrangement allows the antenna to be rotated in any direction, which cannot be said for installation on a wall.

Selection of components

There are three types of equipment from MTS TV:

Interactive console. To unlock the maximum potential of the set-top box, a 3G MTC signal is required. This television has large volume functions.
Linear HD set-top box. It is characterized as multifunctional equipment. Comparable to a lot of TVs.
CAM module. The device is adapted for TV equipped DVB-S tuner. Based on this, we draw conclusions: before purchasing a CAM module, you need to be sure that there is a built-in tuner. Since even new TV models are released without a tuner.

To set up satellite MTS TV, you will need:

Tools.
F-connectors in the amount of 2 pieces.
Bracket to secure the antenna.
Directly the CAM module with a smart or SIM card. Also a prefix, if the choice is on it.
Antenna.
Coaxial cable.
Converter.

As an additional set, the following may be useful: a divider and a plug. The first is needed when connecting two TVs; its operating range is considered to be from 950 to 2150 MHz.

Antenna installation

The antenna comes with instructions that describe the entire installation process. Initially, we tighten the nuts (moderately) so as not to damage the body, but also to prevent the fasteners from dangling from the bracket. There is no need to fasten the wall bracket, and you also do not need to tighten the nuts responsible for turning the antenna angle.

The two-piece bracket must be assembled separately and does not need to be attached to the antenna. At the initial stage, a converter is connected to the dish; cable connections are made later.

To securely fasten the bracket, a perfectly flat surface is required. Place the bracket on the surface and mark the points at the mounting location with chalk or a marker. We drill holes in the surface and attach the bracket using dowels. Then we put the antenna on the installed bracket, select the required angle and carefully tighten the nuts. By “required angle” we mean the vertical limit angle of the mirror.

We install F-connectors on the converter, strip the cable and also connect it to the convector.

Setting up an MTS TV satellite television antenna

To set up an antenna, you need to pay attention to two main factors: the position of the convector and the antenna. Should be activated on phone GPS and enable the SatFinder program discussed above. We give preference to satellite ABS-2A, 75°E. The program points a straight line in the direction of the satellite. The required angle of rotation and tilt of the satellite dish is calculated.

Using the set-top box, we test the signal quality

As soon as the antenna is configured, we connect the cable (its other end) to the MTS set-top box. You need to go to Settings and select “Antenna Settings”. The signal level of the installed antenna will be displayed on the TV.

When bad signal you need to turn the antenna up or down, as well as to the sides, while simultaneously monitoring the signal level on the TV. Often, such manipulations are not worth carrying out using the SatFinder program. A good signal has been achieved - secure the antenna.

About setting up TV equipment from MTS

To connect the set-top box, we connect the antenna cable to it; to connect the device to the TV, we use hdmi cable. We place the CAM module in the TV connector. It should fit tightly. Afterwards we insert the access card into the module.

Details about setting up an interactive MTS TV set-top box:

Before turning on the set-top box, insert the SIM card into the slot.
The initial launch of the set-top box is accompanied by loading of the 3G signal.
Let's authorize the device. During authorization, several methods will be offered. A demo version will be used first. Once the operator receives your signed documents, working version will be activated.
Create a user profile and save it. To set a password to prevent unwanted use of the set-top box by third parties, you need to go to the access settings.
Let's move on to searching for channels. Once scanning is completed, a list will appear on the screen available channels. This is the final stage of setting up the console.

How to set up an HD set-top box

Initially, install the smart card in the appropriate connector (if the TV receiver does not receive power).
Next, we power the TV receiver from an electrical network with a voltage of 220 V.
The switched-on position of the TV receiver is indicated by a green light; if it is not lit, turn on the set-top box using the remote control. The red button is responsible for turning it on.
Turn on the TV and set the mode to AV or HDMI.
The screen will display “ Initial installation" It allows you to configure the transponder, menu language or image, and the satellite as a whole.
To search for channels, activate the navigation buttons, give the “Search” command and click “OK”.
As soon as the channel search ends, the channel that was found first is immediately displayed. The “Exit” button stops the search.
Remember: the equipment must be authorized, otherwise the channel broadcast will last only 5 days.

Setting up MTS satellite TV on your TV is not difficult. You just need to carefully read the material in the article and you will succeed.