Is it possible to flash a tp link router. How to update drivers for any router easily and quickly? Detailed instructions

Now we will update the firmware on the Asus router. Which model specifically? This article is suitable for all Asus routers, and I will show it using the example of a router. So far there is no other Asus at hand. But, on all more or less new devices of this company, the control panel is the same (in dark colors). On my old Asus RT-N13U B1, the control panel is kind of blue, but even there it’s not at all difficult to find a page where you can update the firmware. And the process of searching for firmware and updating, which I will show in this manual, is suitable for all models.

To flash your router, you need to follow these steps:

• Find out your router model and its revision (hardware version).
• Check if there is a firmware update for your Asus router
• Find and download the firmware from the official Asus website.
• Connect the router via a network cable to the computer.
• Go to the router settings and upload new firmware.

A few nuances:

• If your router is already configured and working, then you can go into its settings and, by clicking just one button, check if there is a new version of the software. So as not to search for firmware, etc. What if there is no new version. But, it seemed to me, this check is a little lying. Or she only finds some serious updates. I originally had the firmware 3.0.0.4.376_3754 . I intentionally uploaded an older one 3.0.0.4.376_3690 . I ran the check, and the router told me that I had the latest version installed. We draw conclusions: the online check is lying, a rollback to the old firmware on the Asus router can be done.
• If you have a new router, and you want to update the software before setting it up, then you need to immediately look for a new version of the software and update it. Or, again, configure the router and check for a new version from the control panel.
• As far as I understand, even if you have already configured your Asus, the firmware update will not affect your settings; you will not have to configure it again. Which is very good.
• Be careful when downloading firmware from the manufacturer's website. Download the firmware specifically for your device (we'll look at this in detail now).

The router's control panel doesn't say anything about not flashing the router via Wi-Fi. If nothing is said about this, then it can be done, but I do not recommend it. It is better to connect to the router via a network cable at the time of updating the firmware. Or perhaps you already have a computer that is connected via LAN. If something goes wrong during the update process, or you upload the wrong firmware, then most likely it will go into emergency mode and you will have to restore the router with the Firmware Restoration program. And it’s not a fact that it will be possible to restore it.

Find out the model, revision of the router and download the firmware for Asus

The model of your router and its hardware version are best viewed on the sticker on the bottom of the device itself.

Now go to the support page on the official Asus website at http://www.asus.com/support/.

In the search options we write model of your router and press Enter. For example, I have RT-N12+.

In the list of found devices, find your router and click on the link below it Driver & Tools.

Your device's page will open. In the list where you need to select an operating system, select Others. Click on the item Firmware and download the latest firmware (it's usually at the very top). Pay attention to the firmware version, check it with the firmware that is already installed on your device (you can see it in the settings, or at the bottom of the device).

If there is a new version on the site, then click on the link Global and save the archive with the software to your computer.

Immediately extract the firmware file in the format .trx from the archive we just downloaded.

Everything is ready, you can start updating the software.

Asus router firmware update process

It is best to connect to the router, as I wrote above, via cable.

In the router settings, go to the tab Administration - Firmware update. Click on the button Choose File, and select the firmware file on your computer. To start the update, click on the button Send.

We are waiting for the update process to finish. We don’t turn anything off or press anything.

After the update, the main settings page will open.

To then check for the availability of an update, you can go to the settings in the same tab Administration - Firmware Update, and click on the button Check (Internet on the router must be configured). The current software version is also indicated there.

Afterword

It doesn’t seem to be difficult, but it’s somehow confusing with the search for firmware. That’s why you can’t make sure that in the settings there is a link to download software immediately for a specific model. After all, it’s not difficult to do. I also don’t understand whether it makes a difference what hardware version of your router you have. As far as I understand, there is no difference.

And one more joke, I immediately had a newer version on my router than the one I downloaded on the site (downloaded the newest one, which was on the official website). Maybe they just haven't added it to the site yet.

If you have any questions, just ask. I try to help.

Routers need to be updated from time to time to get the most out of the device. TP-LINK TL-WR841N is no exception; it can also be flashed if you have the necessary . How to do this correctly? Let's look at it in more detail.

Even a schoolchild can cope with updating the device

How to update software

There are a number of important nuances, knowing which before performing the update will greatly help you:

• The TP-LINK TL-WR841N settings will be reset to default. There is nothing tragic here, because the device is set up in a matter of minutes. Experts recommend copying the configuration before flashing the firmware. There is a special option for this in the device interface.
• You can only update your router with a cable connection. It is strictly forbidden to flash TP-LINK TL-WR841N via Wi-Fi. You must disable the wireless network option on your PC and do not turn on the device during the update.
• You need to disconnect the provider's cable from the router while updating the firmware. This will help avoid additional difficulties during the update.
• It is advisable to make sure that the selected firmware for the router is correct. By using a file for a router of a different model, you risk disrupting the performance of your router.

Before you start searching for any program on the World Wide Web, it is important to understand what hardware version your router has. It’s easy to read about the TP-LINK TL-WR841N version; just study the sticker located on the bottom of the router.

Firmware search

You should download router software exclusively from trusted resources on the global network. The TP-Link website is suitable for your device. Once on this resource, enter the model of your router in the search. The result should be a link to the required model. Next, in the “Downloads” tab, we recommend selecting “Firmware” (the item is located in “Software”) and clicking on your hardware version.

The download process will begin; the file must be unzipped to a convenient location on your PC. Don't forget that the firmware at the top of the list is considered the newest. It is possible that your device already has the latest firmware, so we advise you to first compare the current version with the version offered on the Internet. The file information on the site indicates the size, language, date of publication and release, and notes. Additionally, the changes are described here.

It is important to understand that installation from the developer’s website ensures proper operation of the router. You will not lose the possibility of warranty repair of TP-LINK TL-WR841N if you use this method. The warranty on the device is void in all other cases. This happens when using third-party utilities (DD-WRT, for example).

Update

As you know, all manipulations for configuring the TP-LINK TL-WR841N are performed in the interface. It’s easy to access; just enter 192.168.0.1 in your browser. Login parameters may be different if you changed them during initial setup. For new equipment, the admin/admin parameters are suitable.

After this you will see the interface menu. The firmware is installed in the Frimware upgrade item of the System tools section.

All that remains is to indicate the location where the previously downloaded *.bin file is stored. To do this, click on the “Browse” button and enter the path. Then execute the "Open" command.

The last step is to start the upgrade by clicking on Upgrade. You will see a window on the screen with the inscription “Processing...”. The procedure takes a certain time; during this period we do not recommend turning off your PC or router. Having accepted the new firmware, the product will reboot on its own.

The next time you log in, the system will ask you to enter login/pass, otherwise you will not be able to access the menu. In this case, the admin/admin parameters will help you out, since the device has been reset to standard settings. We advise you to change the standard login data, and then load the previously saved configuration file, this will help you fully work with the device. Now you can enjoy the most efficient TP-LINK TL-WR841N configuration.

Any router, like many other complex devices, is equipped with flash memory with a set of firmware that is necessary to launch, configure and operate the device. At the manufacturing plant, each router is flashed with the latest BIOS version at the time of release, and up to a certain point, this embedded software is quite enough for correct operation under various operating conditions. But the hardware manufacturer may release a new version of the firmware with greater capabilities and correction of identified errors. So how to flash a TP-Link router correctly and safely?

The ability to independently reflash a TP-Link router, if necessary, can be very useful to any user of network equipment. There is nothing very complicated in this process, the main thing is to follow the logic and sequence of actions. Exercise healthy caution and intelligence, because unsuccessful firmware can damage your router, and you will lose the right to warranty repair of the device.

So where to start? We connect a personal computer or laptop to the router using an RJ-45 cable. A wireless connection via Wi-Fi is undesirable due to the relative instability of data transmission. Ideally, it is very good to take care of uninterrupted power supply for the device being flashed and the PC, if this is possible in your conditions.

1. First, we find out exactly the model of our router. If the accompanying documentation for the device has not been preserved, then this information can always be found on the back of the router case.



2. Then we read and remember the hardware revision version of the router on the same label. Any router model may have several of them and the firmware is mutually incompatible. Therefore, be careful!



3. Now we know exactly for which device we need to find new firmware and go to the official website of the router manufacturer.
4. On the TP-Link website go to the section "Support", where we will find everything we need to flash the device.



5. On the next web page we go to the block "Downloads".



6. In the search bar, start typing the model number of your router and move to the page for this device.



7. Then confirm the current hardware version of your device and click on the link "Firmware".



8. From the list of firmware versions, select the latest, most recent version by date and begin downloading the file to your computer’s hard drive or other media.



9. We wait until the file is completely downloaded and unpack it in the archiver. We remember the location of the received file in BIN format.



10. Now in any Internet browser in the address bar we type 192.168.0.1 or 192.168.1.1 and click Enter to log into the router's web interface. In the authentication window that appears, enter the username and password, by default they are identical - admin.



11. In the device web interface that opens, in the left column, click on the line "System Tools".



12. In the submenu that pops up, click on the column "Firmware Upgrade", that is, we begin the process of updating the router firmware.



13. On the right side of the page, left-click on the button "Review" to specify the path to the installation file.



14. In the Explorer window, find the BIN file pre-downloaded from the TP-Link website, click on it with LMB and confirm the selection by clicking on the icon "Open".



15. By pressing a button "Upgrade" we start upgrading the router’s firmware.



16. In a small window, we finally confirm our decision to update the firmware version of our router.



17. We wait until the upgrade progress bar is completely painted over. This takes a few minutes.



18. The device reports the successful completion of the firmware update and goes into automatic restart. We patiently wait for the router to reboot.



19. In the column "Firmware Version" We observe information about the new router firmware (build number, date, release). Ready! You can use it.

Rollback to factory firmware

In case of incorrect operation of the device with the latest version of the firmware and for other reasons, the user of the router can at any time roll back the router firmware to the factory one, that is, installed by default. You can read in detail about how to do this in another article on our website by clicking on the link below.

At the end of this article, let me give you one more piece of advice. During the router BIOS upgrade, try to prevent the device from being used for its intended purpose, for example, by disconnecting the cable from the WAN port. Good luck!

It is extremely difficult for a modern person to live without high-speed Internet. That is why today almost every home has a Wi-Fi router. Meanwhile, from time to time all sorts of problems can arise with a wireless connection, which cannot be avoided even if you have a very reliable model. Users ask a variety of questions, in particular, a fairly common question is how to reflash a router.

The need to reflash the router may arise for various reasons, but they all boil down to the device stopping working, a weak wifi signal, or regular freezing. It should be said right away that before you reflash the router, you need to try to solve the problem by simply rebooting the router. We talked in detail about how to do this correctly. True, this option is only suitable if the device is buggy, when the router is completely out of order, you need to try to solve the problem by flashing it. However, the reason for being puzzled by such a question may simply be caused by the release of a new version of the router firmware, and as you know, manufacturers plan to update it regularly to improve the functionality of the device. So, no matter what the reason, the process of flashing the router will not change.

Of course, some differences in the sequence of actions may vary depending on the specific model of Wi-Fi router, but the steps for updating the firmware for most routers are identical, therefore, once you understand the process algorithm using the example of a device of any model, you can easily change the firmware of any router. Below we will provide general instructions, but before you reflash the router using its example, read the list of routers below. If you have one of the above models, then you can immediately follow the link to an article with detailed instructions specifically for your device. If you haven’t found your model, there’s nothing to worry about, look at the general instructions and you’ll certainly succeed.

1. >>>

What you need to know before flashing your router

Flashing a Wi-Fi router is not difficult and will take you very little time, however, there are a number of precautions and rules that are important to know when starting to flash the device. So, before flashing, remember the following rules:

1. You cannot update the utility over a wifi connection. This action is allowed only if the router is connected to a computer;
2. The device must be connected to the computer only via a network cable, which at this moment must be disconnected from the network;
3. The new firmware must fully match the model of your router;
4. You cannot turn anything off during the update process;
5. Before flashing the device, you need to make a copy of the user settings, because after the update, all settings will be reset to factory settings and then you will have to configure everything again.

As mentioned earlier, flashing a router has a lot in common regardless of the specific model, so the instructions below will be sufficient to resolve the issue. So, first of all, you need to download the latest firmware for your device. This can be done on the official website of the manufacturer. First you need to find out the device model and its hardware version. All this information is contained in the router documentation, as well as on a sticker on the back of the device. You need to find the inscription “Ver”. It should also be noted that on some models, for flashing, you need to specify “H/W Ver.:” (this is a hardware revision) and the numbers after “F/W Ver.:” (this is the firmware version). Finding this information should not be difficult. Everything will look something like this:

Having received the necessary data, go to the official website of the manufacturer of your device and enter the router model in the search bar. In the list that appears, you need to select the desired firmware version in the “Downloads” section (this is where you will need information about the hardware version of the router). Download the archive with the firmware to your computer and unpack the archive.

Now you can proceed directly to flashing the router itself. First of all, you need to log into the router's web interface. To do this, open any browser and enter 192.168.1.1 or 192.168.0.1 in the address bar. The address may be different; you can clarify this information in the device documentation. After this, a page will appear with a form in which you need to enter your login and password. By default, most routers have a login of “admin” and a password of “admin”. If you changed this data during the initial setup of the router, then enter the corresponding changed login and password.

After logging in, you will find yourself in the main menu of the router, the appearance of which will differ depending on the specific model. Let's take the tp link router as an example. In the settings, open the “System Tools” tab, in it we look for the “Firmware Upgrade” section.

Click the “Browse” button, specify the path to the file with the firmware and press “Open”. In the dialog box that opens, click the “Update” or “Upgrade” button, and in the next dialog box – “OK”.

After some time, the firmware will be updated and the Wi-Fi router will automatically reboot. That's all, now you will have the latest firmware version.

Upgrading router firmware is a truly scary word for many users who are faced with the need for this action for the first time. Absolutely all Wi-Fi routers have certain software installed, thanks to which the device functions properly, i.e. connects to the provider’s network, distributes a Wi-Fi signal, etc. You may ask: why bother updating the firmware?

Typically, users resort to flashing their Wi-Fi router simply because its manufacturer has released a new firmware version. As a rule, new versions of software contain numerous improvements, innovations and corrections of various errors or problems that were observed in previous versions of the firmware. Simply put, updating your Wi-Fi router firmware is like updating your operating system.

Among other things, users sometimes have to resort to reflashing the router because it has become extremely unstable, for example, interrupting the broadcast of the Wi-Fi signal or completely blocking access to the Internet on some devices. By switching to a different firmware version, even an older one, you can get rid of these problems with the router. Another reason why you need to flash a router is the consequences of a previous, not very successful attempt to reflash the device, but such cases require separate consideration.

In this material, we will look at the general process of updating the router firmware using the Netis wf2419e model as an example. It's worth noting that the firmware update looks almost identical on each router, so you can apply the information below to other routers as well. You will see that flashing a Wi-Fi router is an extremely simple and, no less important, fast process, taking about five to ten minutes at most.

A quick guide to updating your Wi-Fi router firmware

So, where do we start... Let's start our guide by getting to know your router properly: look at its surface, write down some information, and don't forget to look at the surface of the box. For example, TP-Link routers indicate the hardware version, which plays a role when flashing. Have you met? Ok, then let's see what you need to do.

Important points during flashing

Updating the firmware is a simple and quick process, as we have repeatedly indicated, but it still requires some preparation and additional steps from the user. First of all, you need to understand the following: the router’s firmware is only updated when it is connected to a computer via a LAN cable! It’s true, you can flash the device’s firmware via Wi-Fi, but this is an extremely unreliable method that can literally turn a router into a brick. So if you are planning to update the firmware - only the computer and only the cable!

Another important point is that you must use firmware that is exclusively suitable for your router. If you try to install firmware from another device on it, you will probably damage it. In extreme cases, you will need to carry out an extremely tedious procedure to restore the router’s functionality, which will not even provide you with a positive result.

Next, disconnect your provider’s cable from the router during the flashing process. Of course, flashing can be completed successfully even with the cable connected, but a huge number of owners report that this led to extremely unpleasant consequences, which sometimes cannot be corrected.

That's basically all you need to know about precautions when updating the firmware for your router. Let's now look directly at the process itself. As mentioned earlier, we will consider an example of updating the firmware on the budget model Netis WF2419. So, the first thing you need to do is download the correct firmware for the router to your computer. In the case of Netis, you just need to download the latest version for WF2419.

The process of flashing a Wi-Fi router using the example of Netis WF2419

So, let's start in order - go to the official Netis website and go to the Support page. Next, go to the downloads section and select the desired router model. In our case, this is Netis WF2419, which is located in the section of single-band Wi-Fi routers.

The note: For this router model and its relatives, there is no need to select a hardware version, but on others this may be a mandatory procedure before choosing firmware. To determine the version of hardware installed on your router, you will usually just need to look at the bottom of the device itself.

Go a little lower on the page and you will see a list of all firmware versions for Netis WF2419 released by the developer. You can read next to each firmware to see what has been fixed or added to a new version. In this case, we do not have to select the software version. Just click on the download icon and the archived file will be on your computer. For example, the latest firmware at the moment is V2.2.36123. Once you download it, you need to extract a file called netis from the archive (WF2419)-V2.2.36123.bin(this is the firmware file).

Now the most important thing is to disconnect the provider’s cable from the Wi-Fi router and connect it to the computer via a network cable. Next, open the user control panel (address - 192.168.1.1) and go to the advanced settings of the Wi-Fi router. Now open the tab System and click on the subtab Software update. All that remains to be done is to click on the Browse button, select the firmware downloaded earlier, and click on the Update button. Next, a progression bar for installing the new firmware will appear in the control panel. Once the router is flashed, a message will appear indicating that the software update was completed successfully.

We downloaded the firmware and pressed a couple of buttons. Many users think that flashing a router is a very complicated process that requires incredibly deep knowledge in the field of network technologies. However, this process is simplified and automated to such an extent that even a “teapot” can handle it. Do you still feel uncomfortable? Ok, then let's look at this process on another router - TP-Link TL-WR841N.

The process of flashing a Wi-Fi router using the example of TP-Link TL-WR841N

The firmware of the TP-Link TL-WR841N - and any other router - is no different from the Netis WF2419 firmware. The only difference you will have to deal with is checking with the router hardware. Again, as we already said, turn your router over and look at the available information on its bottom (bottom). For example, the software version of our TL-WR841N is V10. All that remains to be done is to go to the official TP-Link website and download the required firmware to your computer.

Let's go to the official website and go to the downloads section. We look at the list of Wi-Fi routers - select TL-WR841N. Pay attention to the drop-down menu with the choice of hardware for the router; The router model in our hands has version 10 hardware. Therefore, select from the drop-down menu V10 and press the button Firmware. At the moment, the latest firmware version is TL-WR841N_V10_151216_RU.

As in the case of a Wi-Fi router from Netis, we download the archive to our computer and then extract the file with the .BIN extension from it. Then open the TL-WR841N control panel (address - http://192.168.0.1) and log in with your details (on the new router this is admin/admin). Find and open the tab System Tools. Next, open a subtab Firmware update. Here we do exactly the same thing: press the button Choose File, select the downloaded firmware and click on the button Update.

Ready. As with the previous router, to update the firmware you need, so to speak, to select the necessary tools and press a couple of buttons. The same procedure applies to other routers. We once again strongly recommend that you do not forget from your mind the important points described at the very beginning of the material, namely: selecting the correct firmware, disconnecting the provider cable from the WAN port before flashing, and not trying to update the software via Wi-Fi. And, of course, do not turn off the power to the Wi-Fi router while updating the firmware, otherwise you will most likely lose the device.

Found a typo? Select the text and press Ctrl + Enter