Lenovo a319 is not charging. Lenovo phone won't turn on

Most owners of modern gadgets have more than once encountered situations where the device malfunctioned or did not respond to commands. Unfortunately, almost all smartphones fail from time to time, regardless of manufacturer and price.

Today we will look at the problem when a Lenovo phone does not turn on, and we will look at the reasons for this.

Lenovo cell phones often suffer from problems with software and hardware components, especially if we are talking about budget models. One of the most common is spontaneous shutdown and lack of subsequent response to various user actions. Although the situation seems scary at first glance, only in extreme cases will you need service repairs or replacement of your smartphone. There are three types of sources of these breakdowns:

• Hardware - a problem in the hardware after falls, temperature fluctuations, tests by the sun, moisture and sand.
• Software – directly concerns the operating system, viruses and crashes.
• External – most often, a breakdown of the charger is mistaken for a problem in the smartphone itself.

Let's take a closer look at the reasons why your Lenovo phone won't turn on and how to solve them.

Trouble-shooting

In this section, we will look at the most common faults that cause Lenovo to not turn on:

• Complete battery discharge and other related battery problems.
• Firmware update failures.
• Software problems.
• Virus attack.
• Mechanical damage to internal parts.

Battery completely discharged

Battery problems can be temporary or permanent, and they have different solutions:

Incorrect system update

From time to time, the Android OS firmware and its shell are updated, but glitches may occur during the process. Often, after installing a new version of the system, equipment turns into a non-working “brick”. However, do not rush to replace it with another model; this can be solved by rolling back to factory settings.

It is done using Recovery Mode. Three buttons are pressed simultaneously in the following sequence:

• Volume rocker.
• Without releasing the previous one, return to the Desktop key.
• In parallel with them there is a power on and off button.

A menu will appear on the screen. The pointer moves with the volume rocker up and down respectively. You must select Factory Reset, confirm your choice and wait for the process to complete.

If after this the smart device does not work, then you need to contact a specialist, and he will do the flashing of the system himself.

Software glitches

Even more often, Android-based cell phones do not start due to various kinds of software glitches. The manufacturer and system developers have provided for such scenarios, so they advise resetting the settings in such cases. We have already discussed how to do it above.

Please note that pressing the keys in succession will not work to start recovery mode on some models. It is started by a special button on the end of the case, which looks like a small hole, using a needle or a special pin that comes with the kit.

Viruses

Viruses are another popular reason for difficulties with Android technology. They arrive by downloading files and applications from unknown sources, and can seriously damage system data necessary for startup. Most likely, a flashing will be required, which will completely delete the information. But in some cases, service center specialists still undertake manual cleaning of the system storage from viruses and malware.

You can avoid this outcome by first downloading anti-virus software, for example, Dr.Web or ESET.

Mechanical damage and moisture ingress

Let's look at the most popular types of mechanical damage that prevent switching on:

• Screen failure (malfunction of the cable, display, or moisture ingress through the seams).
• The charging socket is dirty. Dust, fabric threads from clothes or crumbs get into it. you need to be careful, using a regular needle.
• Damage to gadget contacts with batteries. This can be either oxidation or mechanical stress that led to deformation.
• Damaged power button. If the device is new, then most likely it is a factory defect.
• The worst option is a burnt-out power controller that controls charging.

Conclusion

If the problem cannot be diagnosed, or it cannot be solved at home, the gadget must be taken to a service center. If it's under warranty, avoid third-party interference and apps that require root privileges. And remember that only qualified technicians at certified repair points will be able to accurately diagnose the cause of the problem and choose the best ways to solve it.

Video

What to do if your Lenovo phone does not turn on?

If you encounter the problem that your phone won't turn on Lenovo - You need to do a little diagnostics yourself. And, perhaps, you can fix the problem yourself at home, without going to a service workshop. Of course, this depends on the complexity of the damage and therefore we suggest familiarizing yourself with the most obvious reasons.

Battery completely discharged

Due to non-compliance with the recharging mode, that is, when you continue to use the gadget at a minimum percentage of charge, the so-called deep discharge of the battery may occur. And then, when you connect the phone to a charger or PC, it will not show any signs of life.

These devices simply do not recognize it, since the nominal voltage of the battery has dropped below the minimum indicated on its label. Connect the charger and leave it like that for a couple of hours.

Charger, power connector

You need to make sure that the smartphone is receiving power from the mains. Inspect the charger completely. The power supply, cord, and cord plugs on both sides must not have obvious damage. Check its operation on another gadget. Inspect the connector itself on the smartphone. Perhaps a telephoneLenovo A319, A328, A2010, S60, A6010and other models does not turn on due to non-contact when charging.

Battery

A failed battery will also cause the phone to Lenovo turned off and won't turn on. Some models have a removable back cover, and some need to be removed using a certain heating and peeling technology.

But inspecting the battery and checking its rated voltage is necessary. You can contact smartphone service Lenovo , where experienced specialists will accurately determine the cause of the defect.

Firmware, update

Often, due to incorrect operation of the operating system Android malfunctions occur and you are faced with the fact that your Lenovo phone does not turn on. Reasons that contribute to this:

• the system does not have anti-virus protection;
• using a large number of applications from unknown developers;
• Software garbage is not cleaned;
• The phone's memory is maximally full.

Problems related to software errors can be solved in three ways:

Reflashing should be a last resort, but it eliminates most of the defects caused by platform functionality failures.

Power button, cable

Triggered power button on/off , a broken or oxidized cable also leads to the fact that the smartphone does not turn on Lenovo . Perhaps the slots where the button is located are dirty and it needs cleaning. This problem cannot be resolved without disassembling the gadget.

Screen

Connect your gadget to your PC, is it detected by the system? If the computer sees it, then in this case the matrix (display) is likely defective. The device itself is working, but the screen does not provide an image. What preceded the manifestation of the problem that the phone Lenovo won't turn on? Could it have been a fall, a strong blow, or moisture? Contact a specialist service center.

Mechanical damage and moisture ingress

Any careless action with the gadget will lead to negative consequences. Mechanical damage such as a fall or blow can cause damage that can be corrected by expensive repairs. The same applies to liquids getting on the phone. It is necessary to immediately take action to prevent further oxidation of elements inside the smartphone.

The Lenovo A319 phone is one of the best options for lovers of budget gadgets. The manufacturer has a good reputation, and the smartphone itself is quite inexpensive. However, no matter how reliable the device is, one day you may encounter technical problems.

Many people are concerned about the question: what to do if the A319 does not turn on? And what if Lenovo a319 does not turn on and is stuck on the splash screen? Many users of this gadget have encountered this problem. Since it is very common, we suggest that you familiarize yourself with the main options for solving it.

Option #1. Reboot

We are all accustomed to the fact that if some equipment does not work, then it needs to be rebooted. And it is not at all necessary to find out why exactly it does not start or starts to turn on, but does not load completely. There are a huge number of reasons for failures, and even experts cannot always name the problem you encountered in a particular case.

So if Lenovo A319 does not boot or freezes when turned on, the best and easiest way to resolve the issue is to reboot the phone.

Have you tried rebooting your device but that didn't help? Then repeat it five more times. Getting the system to boot normally is not so easy, but repeated reboots are successful in the vast majority of cases.

You can also try holding down the Home button, as well as the Power and Volume keys at the same time. Some Lenovo models, including the A 319, respond to such an impact and stop hanging.

The main advantage of these methods of solving the problem is the absence of any risk to the phone and the data stored on it. This is their main difference from the methods of bringing the phone back to life, which we will consider further.

Option #2. Hard Reset

If a simple reboot does not help, and Lenovo a319 still does not turn on or does not load beyond the splash screen, you need to resort to more radical measures. The best option is to reset all settings, or, in other words, Hard Reset the phone. This is quite simple to do - you just need to go into Recovery mode.

To make it easier for you to complete this procedure, we offer a simple algorithm:

1. Turn off the phone by holding down the power key for 10-15 seconds.
2. Press and hold the Power and Volume Down keys at the same time. You can do this with one hand, but we recommend using both. There have been cases when, through negligence, people dropped the device while trying to press both buttons with the fingers of one hand.
3. We wait for the manufacturer’s logo to appear, and after a few seconds we find ourselves in Recovery mode.
4. Using the volume down and up buttons, select the “Wipe Data” item. It involves deleting all data and settings from the phone. This way, whatever the software problem is, you will most likely fix it.
5. The system will ask if you really agree to delete all data. Confirm your actions and wait about a minute. Next, agree to reboot the device and wait for the updated software to download.

If all systems start normally and the phone functions the same as it did before the problems arose, then congratulations - you have found a relatively simple and painless way to resolve the issue. If the phone still does not turn on, or the download does not go beyond the screen saver, you can only resort to the third method.

Option #3. Flashing

The third method is the most radical, but it is definitely worth using if the phone suddenly turns off, does not turn on, or freezes. We act according to simple logic - if the system cannot be restored, then it should be replaced. In the case of computers and laptops, we usually reinstall the operating system, and for phones, changing the firmware works.

First, download the firmware to your computer, and then transfer it to the memory card installed in the phone. The firmware is downloaded as an archive, and there is no need to extract files from it. We throw it on the map exactly in this form.

Now we go to Recovery in exactly the same way as in the previous case, that is, by holding down the power and volume buttons. If there are installation files on the memory card, the system will recognize them and offer you the following option: install zip from sdcard. This is exactly what we need if the phone turns off and we need to change the firmware. We confirm the actions by starting to download the file.

Typically flashing takes a few minutes. Don't be alarmed if your phone turns off during this process - this is quite normal. It can reboot, and repeatedly. And this is not a cause for concern.

After several reboots, the system will turn on, and, most likely, you will no longer see freezes and slowdowns. This means that the problem is a thing of the past, and now you know how to turn on a phone that has started to slow down or does not turn on.