Laserjet m1132 mfp does not print from a computer. Troubleshooting Checklist
Nowadays, almost many people have their own printer. As a rule, sooner or later a printer, like any other equipment, may malfunction and malfunction. Usually errors occur as a result of worn parts or improper operation.
Often the cause of the breakdown can be determined independently, but it is best to entrust this matter to professionals, since only they will be able to carry out high-quality diagnostics and repairing your printer.
What will we talk about:
Laser printer
Nowadays laser printers are in great demand. They have many advantages and are superior to conventional inkjet printers in terms of capabilities. Generally, a laser printer is most suitable for office work as it can withstand heavy loads daily, which is relevant for this type of work.
A laser printer is a page-by-page device. It can print more than 150 pages per minute. In the photo you can see what the HP Laserjet M1132 MFP printer looks like.
Most modern laser printers are subject to the same faults. An HP Laserjet M1132 MFP printer error can be caused by severe contamination of the surface of parts with dust and other impurities. Therefore, as a preventive measure, experts recommend cleaning the internal surfaces of the printer from time to time.
Also, often the HP Laserjet M1132 MFP printer installation error can be directly related to the settings or installed driver.
Installing the appropriate driver on your computer
It is worth noting that the operation of the printer depends on the settings and driver. Therefore, you need to install only suitable drivers for your PC. If you encounter problems installing the driver, you need to find out the error code and try to fix it yourself. If this fails, then it is best to contact a specialist.
It's easy to guess that everything possible mistakes appear as a result of various factors. This suggests that the solution to the problem will directly depend on the cause of its occurrence. Therefore, it is worth analyzing the most common mistakes and ways to solve them separately.
HP Laserjet M1132 MFP printer error E2
As a rule, error E2 appears when the cartridge compartment door is open. To solve the problem, you need to check whether the cartridge door is closed. Fault E2 is the most common compared to others.
HP Laserjet M1132 MFP printer error E3
The reason for the appearance of error E3 on an HP printer may indicate problems with the cartridge (missing or incorrect installation).
How to fix error E3?
This error is usually accompanied by loud sounds (crackling, clicking). You can confirm that there is a problem with the cartridge by removing it. If after this the printer no longer makes sounds or writes an error, then the reason has been found and you just need to install a new cartridge.
In any case, error E3 occurs as a result of incorrectly replacing the cartridge. Therefore, before the first replacement, you must study the instructions included with the printer. Primary, visual inspection cartridge and its slot will also help avoid this error and further incorrect operation printer.
HP Laserjet M1132 MFP printer error E8
The appearance of the E8 icon may indicate the presence of a fatal error. Basically, error E8 leads to a complete stop of the printer, since it cannot recover or turn on. Very often this fault occurs as a result of a faulty interface board.
Fixing error E8
Decide this malfunction you can do it yourself. To do this, you need to take several steps:
- turn off the printer and disconnect the cable;
- wait at least 1 minute and turn on the device;
- Next you need to wait until the device is initialized.
If these steps do not solve the problem and the error recurs, you should contact a repair center. Because if you try to repair your printer on your own, you can injure it, which will affect its future operation.
Let's look at others possible problems for laser printers:
- Fuser problem. Typically, when you turn on the device, the device panel displays all 3 LEDs. If this problem occurs, the printer will make a characteristic squeaking sound when printing. Also, after printing, the drive rotates for a very long time.
- Laser scanner malfunction. When printing documents, white streaks appear on the paper or the print is very pale.
- Worn paper transport mechanisms. An orange icon appears when this problem occurs.
- Interface board malfunction. In this case, the printer stops turning on.
- There is a fault in the gearbox. During operation, the device makes a huge noise and turns off when the drive rotates.
- Transfer shaft wear. In this case, a faint print will be observed.
- There is a malfunction in the paper conveyor. This is confirmed if the paper sheets do not reach the fuser, but get stuck.
- Error in duplexer operation. When printing, the paper does not jam and remains on the duplexer.
- Failure in work main board electronics. In this case, the device stops turning on, or turns on but does not print.
- Thick or poor quality paper. As a rule, if you use the wrong paper, the printer prints documents, but the image turns out dull and is easily washed off with your finger.
- The paper path is dirty. The device works, but makes squeaking noises when printing.
All of the above problems can be corrected by replacing or cleaning the relevant parts. You can independently diagnose the HP Laserjet M1132 MFP laser printer only if you have knowledge about this technology. Since the laser printer gets very hot from the inside during operation, it is dangerous to open the device immediately after printing. In addition, incorrect actions can damage the printer, which will affect its further operation.
If the device is not operating satisfactorily, follow the steps in the checklist one by one. If your device fails a certain step, follow the troubleshooting guidelines. If a specific action resolves the problem, the remaining actions on the checklist do not need to be performed.
Troubleshooting Checklist
1. Make sure your device is configured correctly.
A. Press the power button to turn off the mode automatic shutdown or turning on the device.
b. Check cable connections to the power supply.
V. Make sure the line voltage matches the device's power configuration. If you are using an extension cord and its voltage does not meet the specifications, plug the unit directly into a wall outlet. If the device is already plugged directly into a wall outlet, try using a different outlet.
d. If none of these steps restore power, contact HP Customer Support.
2. Check cable connections.
A. Check cable connection between the device and the computer. Check the connection is secure.
b. Check that the cable is working properly by replacing it with another one if possible.
V. Check network connection Check if the power indicator is on. The network indicator is located next to the network connector on the rear panel of the device.
If the device still does not connect to the network, remove the device from the system and install it again. If the error persists, contact your network administrator.
3. Series M1132. Check to see if any lights on the control panel are lit. Including whether it works and buy it if necessary.
Check to see if any messages are displayed on the control panel.
4. Make sure the paper you are using meets specifications.
5. Make sure the paper is loaded correctly in the input tray.
6. Make sure the device software is installed correctly.
7. Make sure that the printer driver for this product is installed on your device and that you select the device from the list available printers.
8. Print a configuration page.
A. If this page does not print, check that there is paper in the input tray.
b. Make sure it is installed correctly.
V. If paper is jammed in the product, clear the jam.
d. If the print quality is not satisfactory, try the following:
Make sure the print settings match the media you are using.
Solving print quality problems.
9. Print a small document from another application that was previously printing normally. If the document prints normally, the problem lies with the program you are using. If the problem persists (the document does not print), try the following steps.
A. Try printing the job from another computer that has the product software installed.
b. Check the cable connection. Specify desired port for the device or reinstall the software, selecting the connection type to use.
Factors affecting device performance
Several factors affect how long a job takes to print.
Using special paper (such as transparencies, thick paper, and custom-size paper).
Device processing and loading time.
Complexity and format of graphic images.
The speed of the computer you are using.
Network connection or connection using a USB cable.
Device I/O configuration.
Restore factory default settings.
Restoring factory default settings returns all device settings to factory defaults, clears the fax header, phone number, and all fax numbers stored in the device memory.
Restoring factory default settings returns all device settings to factory defaults, clears the fax header, phone number, and all fax numbers stored in the device memory. Also, this procedure cleanses phone book fax and deletes pages stored in the machine's memory. Then, according to the procedure, the device automatically restarts.
1. On the control panel, press the Install button.
2. Use the arrow keys to select the Maintenance menu, then press OK.
3. Use the arrow keys to select the Restore Defaults option, and then click OK.
The device will automatically restart.
Interpreting the Location of Control Panel Lights
When the device requires service, an error code appears on the control panel screen. Indicator designations
Indication of the state when the indicator is off
Interpreting Control Panel Messages
Types of Control Panel Messages
Warnings are only displayed for a certain period of time. They may require the user to confirm the job by pressing the OK button or cancel the job by pressing the Cancel (x) button. Some warnings prevent you from completing a job or affect print quality. If the alert is related to a print job and the Auto Continue feature is enabled, the product will resume the print job without confirmation after a 10-second pause during which the alert is displayed.
Critical error messages indicate some kind of failure. Turning the power off and on may solve the problem. If the critical error persists, the device may need service.
Possible location of jams
Jams may occur in the following places.
Document feeder
Internal cavities (open the door leading to)
A media jam may occur in one of the following locations.
Clear document feeder jams
1. Open the document feeder cover
2. Carefully remove any jammed paper. Try to remove the page carefully without tearing it.
3. Close the document feeder cover.
Clear jams in the output tray area
Do not use sharp objects, such as a pencil or scissors, to clear jams. The warranty does not cover damage caused by sharp objects.
Lift the scanner assembly and open the door.
2. Remove it.
Hold the access door open and use both hands to grasp the exposed edges (or middle) of the jammed media and carefully remove it from the printer.
4. Install it.
Clear jams in the input tray
2. Remove it.
3. Remove the stack of print media from the input tray.
4. With both hands, grasp the visible part of the media (including the middle part), and carefully pull it out of the product.
5. Install it.
6. Close the door and scanner assembly.
Clear jams inside the device
1. Lift the scanner assembly and open the door.
2. Remove it.
3. If the jammed paper is visible, gently grasp it and slowly pull it out of the product.
4.Push into place.
5. Close the door and scanner assembly.
Change the paper jam resolution option
If Jam Recovery is turned on, the product will reprint the page that was damaged by the jam.
b. Right click Click on the driver icon and select Properties.
b. Right-click the driver icon and select Properties.
A. Being in apple menu tk, press menu System Settings, and then click the Print & Fax icon.
V. Click the Options button.
2. Select Auto or Off. under Clear paper jams.
Troubleshooting paper management problems
The following problems may cause poor print quality, media jams, or damage to the product.
The media is not loaded correctly or the input tray is full
Turn over the stack of paper in the input tray, or try rotating the paper 180 degrees in the input tray.
Make sure that the paper is loaded correctly and that the paper guides are not too loose or that they are not constricting the stack of paper too much.
There may be a jam in the paper path.
Clear any paper jams.
The paper does not meet HP specifications.
Air inside envelopes may cause wrinkling.
Remove the envelope, straighten it, and print again.
Toner appears around the printed characters.
The paper may not be loaded correctly.
Turn the stack of paper in the tray over to the other side.
If there are scattered around the symbols a large number of toner, the paper may have high resistance.
Use other paper, such as high-quality paper designed for laser printers.
The image at the top of the page (solid black) appears further down the page (as a gray box)
The printing of the image may be affected by program settings.
In the program, change the tone (darkness) of the field in which the repeating image appears.
In the program you are using, rotate the entire page 180 degrees to print the lighter image first.
The order of the images may affect print quality.
Change the print order of the images. For example, place a lighter image at the top of the page and a darker image at the bottom.
The device may have been affected by a voltage surge.
If the problem occurs during the next print job, turn off the printer for 10 minutes and then turn it on again to resume the print job.
Copies are blank or very faded.
There may be a defect in the printer.
The original is of poor quality.
Sometimes when copying documents that are too light or damaged, even adjusting the contrast will not allow you to get a copy good quality. If possible, find a higher quality original.
The contrast may not be set correctly.
Use the control panel menu to change the contrast setting.
The original with a colored background is used (buying ink cartridges for hp, epson, canon, brother printers, purchase of inkjet cartridges from the printer, prices, travel).
Due to the colored background, the background and the foreground image may merge, or the hue of the background may change. If possible, use originals without a colored background.
Repeating Defects Scale
If defects appear on the page at regular intervals, use the following scale to determine the cause of the defect. Align the top edge of the scale with the first defect on the page. By the mark that matches the next similar defect, you can identify the faulty component.
If the defect is related to the printing mechanism or fuser, then the device needs to be serviced. Contact HP Customer Support.
Repeating Defects Scale
Optimizing and improving image quality
Changing Print Density
1. Changing the default print settings is done using the printer driver. To do this, follow the appropriate procedure, depending on the operating system installed.
Windows XP, Windows Server 2003 and Windows Server 2008 (uses the default Start menu view)
A. From the Start menu, select Printers and Faxes.
b. Right-click the driver icon and select Properties.
V. Click the Device Settings tab.
Windows XP, Windows Server 2003 and Windows Server 2008 (used classic look Start menu):
A. Click the Start button, select Settings, and then click Printers.
b. Right-click the driver icon and select Properties.
V. Click the Device Settings tab. Windows Vista
A. Click the Start button, point to Control Panel, and under the Hardware and Sound category, click the Printer icon.
b. Right-click the driver icon and select Properties.
V. Click the Device Settings tab. Mac OS X 10.4
A. From the Apple menu, click System Preferences, and then click Print & Fax.
b. Click Printer Setup. Mac OS X 10.5 and 10.6
A. From the Apple menu, click System Preferences, and then click Print & Fax.
b. Select your device on the left side of the page.
V. Click the Options button.
d. Go to the Driver tab.
2. Move the Print Density slider to change the setting.
Setting up and managing printer drivers
The product uses a paper type setting to set many internal settings that affect print quality. Always use the appropriate media type settings in the printer driver. Also, check that the other settings on the Paper/Quality tab in the printer driver are correct.
Any office computer It’s impossible to imagine without a printer. At home, its place is often taken by an MFP (multifunctional device). Such a replacement is absolutely justified from a practical point of view. These devices can scan, copy and print documents. Some particularly advanced models can do the same with photographs. But their prices start at $300. The HP LaserJet M1132 MFP looks very interesting compared to its competitors.
Positioning
The device is positioned by the company as an inexpensive solution for home and office. Although in the case of the office, HP clearly failed. The printer is, of course, good, but in office bedlam it simply won’t be fast enough. Even though it's laser. LaserJet M1132 MFP is more suitable for home use. Here he will definitely have no competitors. Since this device is monochrome, it is not suitable for printing photographs. But for documents, this is what you need.
Appearance
With its entire appearance, the printer seems to hint that it is intended only for printing documents. There is not even a hint of elegance in the appearance of the device. Right angles, stylish design. Everything is in the best traditions of office technology. However, for such devices appearance- far from the main thing. Despite all the design flaws it works LaserJet printer The M1132 MFP is just great. And for users, the main thing is the printing speed and quality of the prints. The rest is not so important.
Under top cover The MFP hides a scanner that performs well when transferring documents to a computer. However, it won't handle photos as well. The lack of resolution and low speed work. Just below are the cartridge trays and the sheet tray itself. The location of all elements is quite convenient. There are no surprises in the design of the HP LaserJet M1132 MFP. Classics don't need frills.
Specifications
The LaserJet M1132 MFP printer has the following technical characteristics. Printing speed is 18 pages per minute, cartridge resource is 1600 pages. The maximum monthly load is 8000 pages, the supported paper type is almost all known. It turns out that the characteristics of the MFP are quite mediocre. And the cartridge will run out very quickly with a maximum monthly load. It will have to be changed (or refilled) several times a month. This is what concerns the main characteristics of the printer.
The scanner works separately and has its own characteristics. Scanner resolution - 1200 DPI, scanning speed - 6 pages per minute, bit depth - 24 bits, scanning type - flatbed. The most common scanner for transfer text documents on computer. It recognizes text well, but it is not suitable for photographs.
Interfaces and other features
Everything here is done in the spirit of minimalism. The LaserJet M1132 MFP has only two connectors. One is for the power cable, and through the second you can connect it to the computer. Truly impressive brevity. And although there are icons nearby depicting a network connection, there are no more connectors visible. These options are probably only available in the modification LaserJet Pro M1132 MFP.
The device is also equipped permanent memory in a volume of 64 megabytes. There is no way to expand it. The MFP control panel contains only a few buttons that help control basic functions: copying and printing. You can also adjust the contrast and scale. This is already good. Many budget models lack even such options. This particular device is even more interesting.
Scanning process
Let's move on to this feature of the LaserJet M1132 MFP. Scanning is interesting because it can save a person a lot of time, since there is no need to retype the “paper” text. The scanning parameters in this MFP are not flexible. Standard Definition(640 by 800), standard bit depth (24 bits) and not very high speed. All this indicates that this is truly a budget device. Just with some improvements.
The device does an excellent job of scanning documents. The scanner recognizes the text adequately. There are no problems with this. However, you will have to buy another device to scan images. The budget of the filling affects it. But the main task of this device is printing. And the printer copes with this perfectly.
Errors during operation
Any technique is imperfect. Sometimes a task cannot be completed due to certain errors. In the case of this device, HP LaserJet M1132 MFP printer errors are mostly caused by improper use or untimely refilling of cartridges. Very often, users simply forget to replace the cartridge, and the printer displays an error stating that printing is impossible.
Errors can also occur due to incorrect installed drivers or other software. Errors also occur due to a sheet of paper getting stuck in the printer mechanism. To eliminate the error, you need to clean the mechanism. This is a long and tedious task, but it must be done, because otherwise the printer simply will not work.
Replacing and refilling cartridges
It's not that simple here. The cost of a print changes when replacing or refilling cartridges. The price is not very high for the LaserJet M1132 MFP. The cartridge is simply worth its weight in gold. This is HP's policy - to sell printers for next to nothing, and consumables for them at exorbitant prices. If you simply replace the cartridge with a new one every time, the cost of a print will rise sharply. But you can also refuel them. It will cost much less. In this case, printing on it will be much cheaper.
However, manufacturers recommend using only original cartridges(this is understandable). But there are reasons to use pre-filled cartridges. Since the printer is laser, refilling is dangerous. This is in inkjet printers you can just fill in the ink and forget about it. This won't work here. Therefore, it is better to buy a ready-made cartridge.
Some operating features
There are no foreign odors observed when using the HP LaserJet M1132 MFP. The only inconvenience that can be noted is the rather loud noise (compared to other models budget segment). There is one more feature: the device gets very hot. When continuously printing at least 50 sheets, it is almost impossible to pick up the printed material without getting burned. Therefore, it is not recommended to print large documents in one sitting. It's best to wait until the printer cools down.
It is also not recommended to try to turn off the printer when it has just accelerated. This may damage the filling. The printing element itself can be seriously damaged. In the most extreme cases, the LaserJet M1132 MFP printer will simply burn out. It is also worth paying attention to the stand of the print tray. She's very flimsy. It can be broken very easily by a careless movement. So it needs to be handled carefully.
User manual
In principle, the rules for operating printers are known to most of their owners. But you cannot rely on awareness alone. Each model has its own unique features. And the LaserJet M1132 MFP, the instructions for which are written in Russian, is no exception. All safety measures must be strictly observed. Otherwise, the MFP can easily fail.
What should you know when using this printer? First of all, never try to print cold. The laser and the entire printer system need time to warm up. If you try to force it to print immediately after turning it on, you will not get a sane document. This is the best case scenario. At worst, the printer's hardware will fail. Secondly, you need to monitor the number of prints in the tray. If it exceeds the limit of 100 sheets, then the next prints will simply be jammed in the mechanism. And removing them from there is not an easy task.
Advantages and disadvantages
There is no way around this part of the review. The advantages of this model include acceptable printing speed, short warm-up time, excellent printing resolution, high-quality assembly and classic design. It can also be noted that the plastic of the case is not glossy, but matte. This means that it will not collect fingerprints. This is also a plus.
Now let's move on to weaknesses LaserJet M1132 MFP. The cartridge is the weakest link. Its resource is catastrophically small. It will have to be changed often, and it costs a lot. But this is the situation with all budget laser printers. Also, some may be upset by the ability to connect exclusively via a USB port. None wireless interfaces, Thunderbolt ports and other goodies. But expect such options from budget model no need to.