The microsd memory card is not detected, what should I do? Why doesn't my phone see an SD or microSD memory card - all solutions

Youtube

This problem is quite common, there can be many reasons, including: hardware And software.

The saddest option is complete breaking devices. If your drive has been in use for a long time and at some point stopped reading discs, then perhaps its service life is already running out, this situation is especially typical for laptop drives. Unfortunately, their resource is short.

DVD drive has failed

In any case, do not rush to get upset, test the drive on another computer, if it works there, there are software problems.

Make sure the drive is physically correct connected. Do you remember if it was turned off? Suddenly you forgot to connect it.

The hardware problem also applies laser clogging(dust on the lens). If the drive is displayed in the Computer section, but the discs are not readable, then perhaps the laser could simply be clogged.

You should open the device and use a simple cotton swab to carefully clean the head. Also for these tasks there are special discs on which cleaning agents are applied. Spinning such a disc in the drive will clean the laser head.

If the laser head completely broken, and not just clogged - you can, of course, try to take it to service center, but it’s easier to completely replace the drive than to try to revive it. Don't want to bother with installing a new drive? Can buy portable. It costs a little more, but it is much more convenient. You can connect it via USB port when you need it.

Software causes of malfunction

The situation is simpler with software problems. The disk drive may be disabled in BIOS. Detailed Guide on inclusion specifically for your BIOS version can be found on the Internet.

Remember at what point the drive stopped reading discs. You may have installed a program like Alcohol 120% or Daemon Tools. Emulators virtual disks I can be cause broken DVD-Rom. In this case, you can try the following. Go to Device Manager. This can be done via Control, right click by Computer icon.

Go to device Manager and make sure everything is in order there, in the section DVD drives and CD drives. In chapter IDE ATA/ATAPI controllers delete duplicate channels, if any. After that restart computer.

If this doesn't help, remove the software causing the failure and check the drive again.

In the manager you should also pay attention to the section DVD drives for the presence of non-working or . In this case you will need reinstall driver.

There is another option remove device And restart PC, this way you can start reinitialization.

Congratulations to women on MARCH 8! - 03/05/2019

We wish you all the brightest and most beautiful things! Let spring bloom in your soul and fill it with joy and beauty! Let this holiday leave many bright impressions and beautiful, romantic moments! Let the impossible become possible! Success and joy in everything! All women receive a GIFT upon purchase!

Congratulations to men on Defender of the Fatherland Day! - 02/21/2019

Dear men, we wish you good health, good luck, love, luck and peaceful skies above your head on this holiday! Do not know defeat in anything, confidently move only forward towards achieving your goal! And we, in holidays, we give all men a gift with their purchase!

SUNDAY PRICE! - 02/18/2019

"SUNDAY PRICE!" - MAKE A PURCHASE ON SUNDAY WITH UP TO 20% DISCOUNT - phones, tablets, laptops, printers, headphones, components, etc.

GIFT CERTIFICATE! - 01/21/2019

Are you struggling with what to give your friends, family and loved ones for a birthday or other celebration? Make them happy - purchase a GIFT CERTIFICATE from us for any purchase amount computer equipment!

LOYALTY PROGRAM “CUMULATIVE” - 01/14/2019

Now buying a product has become easier! The service of purchasing goods under a savings program is provided. The buyer selects a savings product, enters into an agreement and receives a savings card. The buyer pays any convenient amount at any frequency. The buyer can always demand a return of the accumulated funds or take any other product, because he himself determines the end of the contract and the moment of payment.

BONUS CARD – FREE! - 01/08/2019

For regular customers - our LOYALTY PROGRAM! Bonuses on all purchases!!! By purchasing from us, you get real money towards your next purchase.

Happy New Year 2019 - 12/18/2018

The SC Crocus team cordially wishes everyone a HAPPY NEW YEAR AND CHRISTMAS! We wish you happiness and health! We also invite you to our New Year's party! A GIFT WILL BE WAITING FOR EVERY BUYER!

Sale, installation and repair of video surveillance systems! - 12/10/2018

ATTENTION! NEW DIRECTION! We sell, install and repair PROFESSIONAL VIDEO SURVEILLANCE SYSTEMS.

MAY 30TH BIRTHDAY! - 05/28/2018

Birthdays are a significant event for company employees and there is every reason for this! No matter what, the COMPANY HAS BEEN ON THE MARKET FOR 23 YEARS! On this corporate holiday, important results of work over the past year are often summed up and new goals are set, the achievement of which will contribute to further development companies. WE ARE, WE GROW AND DEVELOP! According to established tradition, computer equipment is sold at cost!!! We love our customers and want the best for them!

New range of services! Individual computer courses! - 04/17/2017

For all those who want to master working with a computer or expand their existing knowledge, individual computer courses on modern laptops, using a new method, in a cozy environment.

MicroSD recovery is a very popular topic these days, because flash drives break very often, and you don’t want to lose information from them.

Therefore, many are looking on the Internet for information about the easiest way to obtain information from a media that does not work.

Moreover, the problems can be very different - for some, the flash drive simply cannot be restored, for others, errors appear, and so on.

And the answer to the above question is very simple - there is special program for MicroSD recovery, and not just one.

The user only needs to use the most suitable one.

MicroSD recovery programs

CardRecovery

This program does an excellent job of restoring photos, videos and audio content from storage devices.

Unfortunately, regular files it does not restore, therefore it is intended only for those flash drives that are used in mobile phones, cameras and players.

How to use CardRecovery:

Download the program from this link. We launch it, read the greeting and click Next.
Select the flash drive in the Drive letter section, the device type in the “Camera Brand and File type"(we also put checkmarks next to the types of files that will be restored) and the folder where the recovered files will be saved in the Destination Folder section. Click Next.
We are waiting for the restoration process to complete. Click Next.
We see a list of recovered files. We put a tick next to those that we want to save. Click Next in last time. The process is over.

PC Inspector Smart Recovery

It's already much more functional program, which recovers almost all file types available today.

It works as for fixed hard drives, and for removable media. To use it, you need to do the following:

Download the program from this link. Open it.
In the start window, select the “Recovery of logical files” item. You may need to click on the tab with green arrow up left.
Next you need to choose required disk on one of the tabs (it may be among logical drives). Click on the checkmark on the right.

Hint: You can find out the letter and name of the flash drive in Windows in “My Computer” (“Computer”, “This Computer” depending on the OS).

Select the starting and ending sectors. This must be done so that the scan size matches the media size. Click on the checkmark on the left.
Next we will see a list of all files. Green indicates those that can be restored, and yellow indicates those that do not require restoration. After this, you need to click on the floppy disk icon on the left.

R-Studio

On the official website they write that today this is the most “comprehensive” file recovery software.

Users do not resist this conclusion. To recover data from using R-Studio you need to do the following:

Download the program (here is the link) and run it.
In the Drivers section, click on the media from which data will be recovered. Its properties will be displayed in the Properties section.
Next, the folders will be displayed in the Folders section, and the files in this folder will be displayed in the Contents section. To restore them, you need to click on the Recover button on top panel program windows.

Easy Recovery

Many experts say that this is true good program to recover files. There is only one way to check this:

Download free version program from this link and run it.
In the start window, click “Continue”. Next, select “Memory cards”.
Click “Continue” again. Select “Data Recovery” and check the box next to it file system this medium.
Click “Continue” again. Wait for the scan to finish deleted files and windows with a report on the list of deleted files and folders. On each one you can right-click and select “Save as...”.

Flash Memory Toolkit

This is very multifunctional program.

In addition to recovery, it can also perform the functions of testing, destroying confidential information, backup and receiving detailed information about the device.

To recover data, you just need to select the flash drive in the Device section, click on the File Recovery item in the menu on the left and follow all the instructions of the program.

Clue: All of the above programs can be downloaded for free on the non-commercial resource flashboot.ru.

Read our other articles about flash drive repair:

Sometimes restoring a MicroSD flash drive using the above programs does not go as smoothly as you would like - some problems may arise.

Let's look at the most common of them.

Problems with MicroSD recovery

MicroSD is not detected

It happens that you need to restore a MicroSD card, but the computer simply doesn’t see it.

Interestingly, this usually happens completely unexpectedly and without visible reasons: the user inserts the card once again, and suddenly the computer stops seeing it (previously he inserted it, and everything was fine).

In this case, there are three options:

1. The letter of the drive name matches the letter of the already connected drive. Indeed, it is possible that some kind of storage medium is already connected to the computer, and for some reason the flash drive is designated by the same letter when connected. In this case, you need to open standard utility“Disk Management” (Win + R and enter “diskmgmt.msc”), select the flash drive there, right-click on it and select “Change drive letter or drive path.” After this, all that remains is to specify some other letter of the Latin alphabet and save the changes.

1. Lack of drivers. In some cases, both the old proven computer and the new computer with a newly installed operating system may not have drivers for some media. There is only one way out - download and install them. The best way to do this is by searching on the official website. You can use the program DriverPack Solution. You can download it from this link. It independently determines which devices are connected to the computer and whether there are driver updates for them. It’s convenient that the program itself will determine whether drivers for the flash drive are installed. If this is not the case, they will be installed en masse, along with everyone else. To do this, the user just needs to click on the “Drivers” tab on the left and click on the “Install automatically” button.

You can also try connecting the memory card to another device. This will give you a chance to still read necessary files and use the recovery program. For example, you can insert a MicroSD into your phone and restore not the card itself, but the entire phone as a storage medium.

Read other GeekNose materials on disk data recovery:

Another common problem is that the computer sees the flash drive, but does not see the files on the flash drive themselves.

The computer does not “see” MicroSD files

This means that the flash drive itself is detected by the computer, but some files (or even all) are missing from it.

The user may immediately think that the problem is in the card itself and it needs to be restored. But everything can be much simpler.

The solution to this problem is to check your computer for viruses, in particular Trojans, and remove them.

Indeed, the Trojan can make files hidden. So feel free to turn on and use your antivirus before lamenting about lost data.

It is worth saying that in some cases the MicroSD recovery process may differ depending on the device manufacturer.

Recovering MicroSD from different manufacturers

MicroSD Transcend Recovery

For MicroSD cards Transcend has its own file recovery software. It's called RecoveRx.

This program takes into account the individual characteristics of cards from a given manufacturer and is able to perform its functions much better than all of the above programs.

In addition to recovery, RecoveRx can format the card and put a password on it.

To perform a restore, you must do the following:

Download and run the program (here is the link). Select Recover from the menu at the top. In the program window, select Transcend (may differ depending on the name of the card, by default it is the same as shown here).
Select file types.
Wait for the process to complete and see a list of files available for saving. Save the ones you need using the drop-down menu (the one that appears after right-clicking on the file).

Recover MicroSD Kingston

The problem with flash drives from this manufacturer is that they mainly use Phison controllers.

This means that the user will have to resort to low-level recovery.

Other methods may simply not work. Briefly described, the process is as follows:

1. Define the Vendor ID and Product ID parameters so that you can then use them to find the required utility. This can be done using the USBDeview program (link). Open the program and find the desired card on the list. Right-click on it and select “Html report: selected elements”. Scroll the window that appears until you see the Vendor ID and Product ID.

We go to the website flashboot.ru/iflash/ and enter the required parameters in the appropriate fields. As a result, we will see a list of all cases where problems occurred with this model. And on the right, in the UTILS section there will be programs for low-level restoration of this model. The user needs to try them all - usually more can be found on the official websites. detailed instructions by use.

MicroSD Kingmax recovery

Kingmax also has its own software. There are two programs - one for U-Drive and PD-07 series drives, and the second for Super Stick.

You can download both programs.

Their use is extremely simple - you need to insert a USB flash drive, run the program and click on the required drive.

Sandisk MicroSD Recovery

After this, the flash drive will work like new. Using the programs is very simple.

In Formatter Silicon Power there is generally only one small window with two buttons (there you need to click Format), and in SDFormatter there are more options, but you will still only need to click on the Format button.

Smartbuy MicroSD recovery

There is one interesting thing about working with flash drives from this manufacturer - if the flash drive doesn’t work, you can just wait for up to several years, and after that it will work again.

If you don’t want to wait, you need to try all the recovery programs you can find.

This application looks like regular folder.

Having selected the media, you need to click on the Recover button at the top, wait for the process to complete and see a list of files that can be recovered.

Qumo MicroSD recovery

MicroSD from Qumo are famous for the fact that they just suddenly die. One day they stop working, and after that it will be very problematic to see any signs of life in them.

Some users advise using the above R-Studio programs and CardRecovery. But not in all cases they will be effective.

Eat special companies who are engaged in restoring “dead” flash drives using hardware methods, but such services are not cheap, and it is usually cheaper to purchase new drive.

A-Data MicroSD Recovery

IN in this case Most programs don't help either. Best with A-Data flash drives Paragon Partition Manager Free works.

First, in this program you need to perform formatting (Format Partition button in the main menu), and then create a new empty partition (Create new partition).

Oltramax MicroSD recovery

It helps in this case too full formatting using SD Card Formatter. In some cases, it is possible to restore the drive's functionality using ALCOR MP.

Full instructions you can read about its use.

If your SD card doesn't show up in Windows Explorer When you connect it to your PC's Card Reader, don't despair. This common problem with Windows, and although it is very frustrating, it is usually very easy to fix.

Below is a list of fixes that have worked for others Windows users. Start at the top of the list and work your way down until you find the fix that works for you.

Method 1: Update your drivers

In 80%, this problem solved by installing drivers.

The driver can be downloaded from the official website of the laptop manufacturer.

For lenovo laptops

For HP laptops

For Asus laptops

For Aser laptops

For other brands of laptops, installing the driver for the card reader is similar.

Here are the websites of other manufacturers:

Dell - https://www.dell.com/support/home/ru/ru/rubsdc?app=drivers
Prestigio - http://www.prestigio.com/MultiBoard_Drivers
Toshiba - https://support.toshiba.com/drivers

Method 2: Run Windows Installer

Click Windows + R.
Enter " services.msc" without quotes in the launch field and click Enter key .
Find Windows installer.
Then right click on it and click " Start".
You can then run the Hardware and Devices troubleshooter again.

Try checking if Card Reader is recognized in Explorer.

Method 3: Reinstalling the controller

Press the keys Windows + R on keyboard.
Enter devmgmt.msc in the "Open" text box.
Expand universal serial bus controllers from the window.
Right click on drivers and select " Delete" .
Click " OK" in “Confirm request to remove device.”
Restart your computer, the drivers will be automatically installed on your Windows 10.

Method 4: Test your SD card on another PC.

If your SD card is faulty, your computer will not recognize it. To check, you need to find another computer with a card reader and test your SD card on that computer to make sure it works.

If your SD card doesn't work on another PC, it's probably faulty and you need to replace it.

If he really works in another computer, then it is not a faulty card, but it may be that your card reader is faulty.

Method 5: Disable then enable the card reader

Go to Device Manager as above - when I do this, there are no SD host adapters, but there are memory technology devices that have a RealteK PCIE Card Reader. Select that, then click Driver, then Disable, confirm the pop-up, then back to the driver screen click Enable and its pop-up - the SD card now appears as before and is accessible.
I don't know why it works, but it did for me."

If you don't know how to do this, follow these steps:

1) On your keyboard, press the key Win+R(key Windows and key R) simultaneously to bring up the launch window.

2) Enter devmgmt.msc in the launch field and click " OK" .

4) Go to the tab Driver. Click " Disconnect device" .

5) When prompted to turn off the device, click " Yes" .

6) Double-click the card reader to open the Properties windows. Click " Turn on device" to turn the device back on.

We hope these tips help you troubleshoot your SD card issue. Please comment below if you have any questions or suggestions. We are always happy to hear about new solutions!

Method 6: Clean the SD card and reader

Another very common reason for an unrecognized SD card is a very simple one: a dirty SD card or a dusty card reader. Either it will lead to bad contacts between the card and the reader.

So the second thing you need to do is give your card a clean and remove any dust from the reader and then try the card again.

To clean the card, dip a cotton cloth in a little alcohol or water and lightly wipe the dirty area, turning Special attention to metal contacts.
To clean your reader, use a compressed air device to blow dust out of the reader. Alternatively, you can buy a contact cleaner from Amazon that you can use to clean the reader.

Although CD and DVDs They are gradually losing their relevance, giving way to more modern and convenient drives, but there are still situations when you simply need to use a disk drive. To the user's surprise, at the most crucial moment it may turn out that the computer is unable to detect the drive. Fortunately, similar problem can be solved. In this article we will take a closer look at what to do if the computer does not see the drive. Let's figure it out. Go!

You need to start, of course, by defining the nature of the problem. First open the BIOS, to do this click Delete key or F2 while the computer is booting. It all depends on the PC manufacturer. Therefore, it is better to first clarify this information on the Internet specifically for your brand of laptop. Once you are in the BIOS, look at the list of connected devices. If it is not displayed in the BIOS optical drive, you can turn it on. The algorithm of actions will be different for different manufacturers motherboards.

Most easy way, which will help correct the situation - restore standard settings BIOS. To do this, select “LoadDefaults” and confirm the changes made. After that, restart your PC and check the drive again.

Another reason could be incorrect work drivers or operating system. To check for drivers, go to Device Manager, to do this, right-click on the “My Computer” shortcut and select “Manage” from the menu that opens. The Computer Management window will open. In the menu on the left, click on Device Manager. In the list that appears, select “DVD and CD-ROM drives" If the drivers required for the drive are missing, you will see a warning exclamation or question mark. This indicates that something is not working correctly. Right-click on the corresponding line and try to update the drivers or install old ones from the list of previously installed ones. If you have an incorrect driver, you can simply remove it and restart your computer for the changes to take effect.

A driver that is not working correctly can be simply removed

If this method does not help, the problem may be virus software on your laptop. Viruses can cause serious malfunctions in the operating system, so you should not ignore this reason. It never hurts to run a full system scan once again. If your antivirus is outdated, be sure to install Latest updates, otherwise the virus may simply not be detected. It is also recommended to use only . There is a large selection of free licensed antivirus programs, which you can use.

If the laptop is already in such a state that a simple scan will not help it in any way, it is recommended to restore previous state, When operating system worked correctly.

Problems with the drive can also be physical. For example, the whole issue may be poorly connected cables or power. In addition, it is also necessary to take into account the possibility of banal wear or malfunction of the IDE and SATA ports on the motherboard. In this case, you should seek help from a specialist if you have not previously dealt with disassembling laptops.

Now you know what to do if your PC cannot detect the drive. Write in the comments whether this article was useful to you, and share with users your own experience in solving a similar problem.