What program to format a protected flash drive. How to format a flash drive if it is write-protected? Is it possible to format a write-protected flash drive using third-party programs?

Youtube

Very often on removable drives people store important information that may be needed at any time: documents, personal files etc. Some people store “files for the soul” on a memory card: favorite music, movies, photos. But unfortunately, sometimes the unexpected happens and the flash drive stops working, and then you need to figure out how to remove protection from the memory card.

Removable drives can fail due to various reasons. Conventionally, they can be divided into five groups:

Mechanical failure. Perhaps water got into the case or some kind of physical impact occurred;
Logical fault. This may include a request for formatting, a message about deleting information, or a failure in the file system. Such errors often appear due to unsafe removal of the device;
Controller malfunction. The malfunction manifests itself as follows: the disc is write-protected, cannot be displayed or read;
Electrical or thermal damage. Human factor, unstable power supply, incorrect assembly of components, which causes the drive to overheat;
Wearing out flash memory. Due to the fact that the memory of a flash drive is limited by write cycles, after passing this threshold it may become unreadable.

Removing write protection from MicroSD

You can remove protection from the card in different ways. First, try removing protection in the editor. Windows registry. To do this, simultaneously press on the keyboard Windows keys+R, type regedit and press Enter. After that, open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies, in the WriteProtect data change the value from one to zero. Don't forget to save your changes. At the end of the procedure, disconnect the drive and restart the PC. If this doesn't help, try other methods.

Unblocking the card

Place the removable drive on a flat surface with the label facing up. On the left side you will see a small lever for switching - Lock button, which serves to protect the card from accidental erasure. There is no “locker” on microSD, so you need to insert the drive into the adapter and move the lever to opposite direction all the way.

Changing disk properties

If the drive's protection prevented you from copying the data to another drive, and you need to save it, try the following procedure. Connect the card to your computer, find its name in the list of devices and click on it right click mice. A menu will drop down, select “Properties”, then “Access”. The following window will open, in it select “Advanced settings” and check the box next to “Open general access" Confirm the changes by clicking "Ok".

Changing the file system

When writing a file to a storage device larger than 4 GB, an error notification window may appear due to limitations in the file system. If the drive is formatted with FAT32, the data size is one of its write limitations. Change the file system to NTFS. To do this, right-click on the CD disk icon and in the menu that opens, click “Format ...”. Set the file system to NTFS and click “Start”.

Removing microSD protection using a mobile device

Almost everything mobile devices latest generation: smartphones, cameras, players, PDAs can format microSD. You can find this option through the settings and format the flash drive directly through the device. The fact is that the device could have memory protection installed to ensure data confidentiality. Remove protection in settings. Of course, all electronic devices have their own characteristics, and if you have any difficulties, read the instructions for your gadget or contact a service center for advice.

We use software

You can remove write protection using software, while the information on the media will remain intact. Many scripts and utilities have been developed for such an operation, good example- reset.zip. The main thing is to download programs only from trusted sources so as not to bring viruses to your computer. As a last resort, you can make low level formatting by using Hard Disk Low Level Format Tool, but it will erase all data from the flash drive. The main advantage of the utility is that it restores the most hopeless drives that were not formatted by Windows tools.

Perhaps your card has been physically damaged?

Sometimes it happens that when trying to write new data to the drive, physical damage occurs: the card is slightly bent, one of the contacts on the flash drive or on the adapter itself is dirty, and the microSD shorts it out. If the problem is contamination, clean the contacts with a cotton swab, after moistening it in acetone or an alcohol-containing liquid. If the card is severely bent, it will not be possible to restore it. A slightly curved card can be straightened using a press, but you need to act carefully.

For microSD cards you need to use only the native adapter, since with another adapter it is unlikely that you will be able to “upload files”.

Formatting - if other methods did not help

If you are unable to access the data on the card, you can try to “revive” the card using formatting. But remember, all information will be deleted.

Why format the card:

Get rid of viruses;
If it is impossible to “fill in” large file to disk;
The card is slow.

How to format? Right-click on the flash drive icon. When the context menu opens, select the “format” command.

Let's sum it up

We told everything possible ways restoring and removing protection from removable drives. Please note that careful use of the flash drive, safe removal from the computer, protection from moisture, etc. will significantly extend the life of the drive and prevent problems from occurring. If your card begins to work incorrectly, choose the right “treatment” - use the above recommendations!

Good afternoon, dear readers and subscribers of the blog site. I'll tell you a little story about how people break usb flash drives and how to restore them later. My colleague gave one of the employees a flash drive to transfer data from one computer to another. The user completed the transfer and gave us the media. Next, my colleague inserted this flash drive and tried to write something on it and was very surprised that it was not visible at all, only a window immediately appeared that it needed to be formatted, we tried and got an error " Disc is write protected". Let me show you how to solve this problem and return the media to working condition.

What errors look like

Let me show you what the error looks like. On the first window for formatting a removable disk, you will see “The disk is write protected.”

By clicking ok, you will see another interesting warning:

Windows cannot format. Check that the drive and disk connections are correct, make sure the disk is not read-only, and then try again. More information can be found in Help by searching for information about read-only files and how you can change

If you open Disk Management, you will find that the media has a Read-Only status.

There is also a situation where the flash drive is visible and opens, but writing to it does not give anything, even if you take into account that write rights are present on the “Security” tab. Here you already see the message "."

We can easily cure all these symptoms.

Why does it say the disc is write protected?

Let's look at the most common reasons, leading to failure of the USB storage device, both at the physical and logical levels:

Incorrect removal of media from the computer, at the operating level Windows systems. I am sure that you are guilty of this too, in most cases, it is easier for the user to simply remove the flash drive than to remove it correctly through a special window or program. As a result, you increase the likelihood of collapse file system on it, NTFS does not like this.
A large number of errors on the flash drive
Physical wear and tear
Driver problem

Removing the disk is write-protected when formatting

When everything is clear with the reasons, then let's start practicing. I’ll immediately show you a working method that removes the Read-Only media lock. The Formatter SiliconPower utility will help you with this.

You can download Formatter SiliconPower either from the official website or from me.

The utility is completely portable and does not require installation. Launch Formatter SiliconPower.

Before starting, I advise you to leave only the non-working flash drive on

You will see a window in which you will be asked to format, agree and click “Format”

You will be warned that all data will be deleted, we continue the operation.

The recovery process begins; under no circumstances remove the flash drive until you see a window that everything was successful.

This is what the window looks like, that everything is done and now the USB drive is not write-protected and works in your usual mode.

Removing write protection from USB in the Windows Registry Editor

This method will help in 99 percent of cases when your flash drive is visible, but does not allow you to write anything on it. The whole problem here is in one registry key that needs to be corrected or recreated. And so, press the Win and R buttons at the same time, and in the “Run” window that opens, write regedit.

Go to the section:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies

If there is no such section, then you will have to create it via right-click and give it the name StorageDevicePolicies

In the StorageDevicePolicies section, you need to create a "QWORD (64-bit) Value" registry key named WriteProtect and give it a value of 0.

If the WriteProtect key was already in your registry and had a value of 1, then it prohibited formatting the flash drive and wrote that the disk is write protected, change it to zero.

After making changes to the registry, you need to restart your computer, otherwise the settings will not take effect.

How to remove write protection in the command line (cmd)

If you still have your removable media displays the message "What usb disk write-protected" don’t rush to get upset, we have the Diskpart utility in stock. You can run it through the command line Windows string on behalf of the administrator.

At the command prompt, type Diskpart and press Enter. Then enter the command list disk and find your flash drive in the list of disks, you will need its number. Enter in order following commands, pressing Enter after each one.
select disk N(where N is the number of the flash drive from the previous step)
attributes disk clear readonly
exit

As you can see, the diskpart utility has worked, now you can check the result of its execution.

Trancend flash drive won't format

There are also specific methods for USB media, certain manufacturers, for example, for Trancend, there are special utility JetFlash Online Recovery.

As you can see, everything was completed successfully and the flash drive opened quietly.

Resume

As you can see, the error with the inability to read or format a flash drive can be solved very simply, for this there are both built-in utilities and utilities from manufacturers, choose the method that suits you and repair it, if you have questions, write them in the comments, I will try to answer them, thank you all.

Useful advice from user Sergey (Fin)

Now I dissected the corpse and discovered oxidation of the USB contacts. Radio amateurs have a spray called Contact CLEANER, so I used it. The contacts are shiny, the flash drive is read, written and formatted. I hope she will continue to please me with her performance (although this is already a big question, her total age is about 8 years).
Ivan, thank you for the article and all the best!
I hope it helps the rest of your readers.
PS: for those who washed the flash drive or dropped it in water, disassemble it, dry it, then clean the board itself on both sides with a toothbrush and alcohol. It should come to life - I did it myself several times =) Good luck!

Having a problem with a write-protected flash drive? Don't know how to unlock a flash drive and make it readable? You are trying to write some file to a USB drive or SD card, and in response you receive a message: “The flash drive is write-protected.” If you urgently need to copy files to a disk or flash drive, I will show you how to remove protection and format (or clean) the storage medium - for further work, familiar and correct.

We use programs to format memory cards and USB flash drives

Some flash drives come with proprietary software. It works better than standard tools Windows formatting. These programs - not always, but nevertheless - will help remove protection. The downside of this approach is that you lose all the data on the media. So if this is unacceptable to you, move on to the next chapter.

2. More universal method Forcibly format a USB flash drive / SD card - use formatting utilities like Hp Disk Format Tool. You can select the file system and formatting type.

Restoring access to a flash drive through the Registry

The method of removing write protection is quite simple, but requires minimal skill and careful handling of the registry editor. If you are not 100% sure of your actions, do it using the RegOrganizer program.

1. Open the Registry Editor as an administrator (Start – regedit).

2. Go to the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\ directory. If there is no StorageDevicePolicies folder inside this directory, create it. To do this:

3. Right-click on the current directory Control

4. From the menu, select New - Partition and name it StorageDevicePolicies.

5. Right-click on StorageDevicePolicies and select a new value for the DWORD(32-bit) parameter for a 32-bit OS or DWORD(64-bit) for a 64-bit OS, respectively.

6. Rename the dword parameter to WriteProtect, double-click on the line, specify the value 0 (HEX).

7. Safely remove the flash drive and restart your computer.

8. Connect the USB flash drive. If necessary, format it.

Video version of the instructions:

Another solution to remove protection from a disk: use the diskpart utility

diskpart is a console utility included in Windows composition XP and higher, allowing flexible management hard drives, file volumes and partitions at an advanced access level.

We will try to access the problematic flash drive via the console, and then format the write-protected flash drive.

1. Open a command prompt (cmd.exe). Type "diskpart" to open the utility.

2. Type "list disk" to display a list of available disks on the system.

3. Determine where your USB drive is in the list. Enter "SELECT DISK n", where n is your USB flash drive with a write-protected disk.

Be very careful! Wrong choice media will cause you to lose all data on the selected drive.

4. Type "clean" (you may have to repeat this command twice or three times). If nothing works, try other ways to unlock the flash drive.

5. Enter "create partition primary" to create a new partition on the USB flash drive.

6. Enter "select partition" to select a partition on the disk

7. Type "active" to make the drive active

8. Enter "format fs=ntfs" to format to NTFS (before formatting the flash drive, make sure you have selected the correct storage medium!).

By the way, the option with diskpart is one of best methods format a write-protected flash drive without resorting to third-party tools.

Another way to remove protection from a memory card/flash drive. Diskmgmt.msc utility

The protection removal method is suitable for both SD memory cards and USB flash drives. To implement it, we will need a standard Windows component for disk management – diskmgmt.msc.

Start – Run. IN text string type diskmgmt.msc and press Enter
Right button on the partition you want to format (the letter and partition will help you determine)
Select "Delete volume..." and confirm the operation
IN context menu select the "Create Volume" command
Select primary partition
Leave all parameters as default
Click ok

Removing protection from a flash drive through the Windows Group Policy Editor

In some cases, access to a flash drive is limited by local rights group policy Windows. We tell you how to remove protection in such a situation:

Start – Run – gpedit.msc.
In the panel that opens, go to the following section: “Computer Configuration - Administrative Templates - System - Access to Removable Storage Devices.”
Next, you need to deactivate the “Removable drives: Deny read” option by switching to the “Disable” state.

Other working methods for removing file write protection

If none of the above recipes helped, well, other methods on how to remove protection from a flash drive will probably work (the list will grow over time).

Check your flash drive for viruses. Some malicious applications establish their own control over the files, as a result, the flash drive is protected from writing data belonging to viruses. How to remove protection in this case? For scanning we recommend using .
Check if the flash drive has a hardware button that allows you to physically unlock it (there is a switch on the side that needs to be moved towards the open lock). However, today such USB flash drives and SD cards are very rare - these are mostly old device models.
Update the firmware of the flash drive, you can find the exact model on Google by chip vendor and chip vendor model, see Device Manager.

Conclusion. Although it is not always possible to determine why a flash drive is write-protected, of the many methods described, at least one works. If none of the methods for removing protection from a flash drive helped you, all you have to do is replace it usb drive- in other words, buy a new one.

However, ask questions on the topic - you can do this through sidebar on our website. We'll try to help.

The media is write protected: what to do? Questions and Answers

32 GB flash drive WANSENDA when formatted. When you try to delete a file, it asks you to remove write protection from the disk or use another one. What to do, how to remove write protection? I can’t delete or transfer files to a flash drive.

Answer. Try removing protection from your flash drive through the Registry, using the diskpart or diskmgmt.msc utilities (included in Windows). Format the flash drive special programs- Low level format or Disk format tool (see the beginning of the guide).

All my formatting attempts produce the same result: remove the protection, the card is write-protected. I removed the protection in every possible way, but it comes back, I can’t do anything. The phone displays information about a card malfunction and cannot format it in any way. The computer and laptop accept it, but formatting fails.

Can you tell me what to do, how to remove protection from the SD card? Other phones and digital camera didn't help.

Answer. Try resetting the protection using the methods described in the article and immediately format the memory card to FAT32. Check if there is a switch on the SD card (it may be set in the wrong position, so the memory card is write protected).

I can’t format a SONY 64GB flash drive, copy or delete files to it. The system says that the disk is write protected. What to do? I tried everything you have. Doesn't help. I bought Flash from Mvideo about 3 months ago, it worked fine before.

Answer. Some users can remove protection using the proprietary JetFlash Recovery utility. It allows you to format a flash drive at a low access level. If that doesn't help, try removing write protection from the disk through the registry or command line. After this, restart your computer.

I have samsung phone S3600, stopped writing files to the card. The most interesting thing is that there are two photos and one video left on the card - there is NO way to delete them at all. They are deleted from the computer, but then they appear again on the map. I can’t write anything on the card - at first it’s like everything is there, but on the phone there’s nothing... like nothing. I didn’t drop the phone, I didn’t drown it, the card just suddenly stopped working, and in such a weird way. He sees the card, but does not write anything to it and does not delete anything from it... How to remove write protection on a flash drive?

Answer. You can remove write protection on a flash drive through forced formatting. This can be done through the console utility diskpart for Windows or various graphical utilities like SDFormatter or Hp disk format tool.

The files may not be deleted due to errors in reading the sectors on which the files that cannot be deleted are written. You can check the flash drive for errors via Properties - Tools - Check in Explorer.

After navigating with ADRplayer, I can’t delete files (including write-protected ones) from the SD card. In Windows it is recognized as a 118 MB disk with the ADRplayer program on it. The files are all played by this program. Formatting is not possible in Windows.

Answer. Since the SD card's disk is write-protected, you need to format it to NTFS via the command line (using the diskpart utility) or using system utility diskmgmt.msc. In addition, there is a wonderful program for SD cards called SDFormatter - it removes write protection.

It’s not clear what happened to the flash card, when you connect the card to the computer it says “To use the disk in drive J, first format it.” You start formatting in fat32 format without quick cleaning and tried with quick, it says the disk is write protected. I tried the described ones the options didn't help.

The method via diskmgmt.msc after right-clicking on the flash drive does not allow “delete volume” and other actions are simply not active. The file system of the flash card is Raw, and the system says that it is working. What to do, how to remove write protection from a flash drive and revive it?

Answer. In addition to diskmgmt.msc, try removing write protection on the flash drive through the Registry or using the console utility diskpart. For formatting, use non-standard ones Windows tools, and, for example, Low level format. If after these manipulations the disk is still write-protected, try opening the flash drive in another operating system, use it to manage disks on the flash drive third party software- let's say Acronis Disk Director.

I bought a mini sd for a 128gig SanDisk phone. I put it in my phone Samsung Galaxy A5 (2016), it works for a while and then it blocks recording to it. No matter what I did: I formatted it via a PC, and via a phone - it was all to no avail, it would work for a while and then it would block the recording again. How to format a protected flash drive?

Answer. The file table on the memory card may be damaged, making it impossible to write new data. In such cases, it is recommended to check the disk for errors using standard tool chkdsk (Start - Run - chkdsk). If that doesn't help, format the SD card using the sd formatter desktop application. Judging by the reviews, the utility has helped many users when formatting a flash drive. You can also format the SD card via Recovery menu by rebooting the phone in the appropriate mode and selecting the option Wipe cache partition.

I ordered USB flash memory from the Internet. I initially formatted it, but I didn’t like that she didn’t read or see all the formats. I decided to format it completely, without a check mark, just (table of contents). Now a laptop with Windows 10 OS sees it, but requires formatting it. I format it, but the flash drive is not formatted - the disk is write-protected. I’ve already tried to do something (download programs), but I don’t understand, I’m still far from it.

Answer. In your case, it is advisable to format the USB flash drive not using standard Windows tools, I use specialized software– fortunately there is a wide choice. First of all, look for programs specifically for your flash drive on the manufacturer’s website. If not found, use HP USB Disk Storage Format Tool or any disk manager like Acronis Disk Director. Specify NTFS or exFAT as the file system.

1) Sandisk ultra USB 3.0 flash drive 16 GB. I tried everything, from renaming the letter to cleaning the registry. As soon as you start formatting (including through partition management), a message pops up that Windows cannot do this and the flash drive disappears from view. I also tried HDD Low Level Format Tool v4.40 Final - the same thing happens as described above. How to format a write-protected flash drive?

2) I can't format the micro SD card. Writes: “Windows was unable to complete the formatting.” I’ve already tried different programs and the command line. It still doesn’t format. I can’t even delete the files. I click “delete,” removed the flash drive and put it back. The file that I deleted is there again I can neither delete nor format.

Answer. Try other formatting programs: SDFormatter or software available on the developer’s website (sometimes you can use them to format a flash drive bypassing system errors). In addition to Disk Management, you can use any disk manager like Partition Magic or Acronis Disk Director.

You can also assume that the problem is related to Windows or the computer configuration. Try formatting the flash drive on another computer or in a different OS environment (Windows/Mac OS/Linux).

Often, removable drives store important and necessary pieces of information that you always want to keep at your fingertips. Memory cards, in turn, contain a lot of pleasant music or movies. Unfortunately, it happens that these devices stop working. There are many reasons for their behavior. But the main thing is how to bring a flash card, micro sd, memory card back to life.

All the reasons why memory cards, flash drives and other removable media malfunction can be divided into five large groups:

The benefits of write protection on memory cards and micro sd

In fact, write protection is a very useful thing, and only thanks to it can you somehow protect your device from erasing important information. But in addition to the fact that write protection prevents changes to the files contained on the device, it effectively resists unauthorized use of the media.

The latest SecureDigital cards (SD) have new mechanisms to protect against writing and erasing files. These are both mechanical and software methods. To prevent the start of writing or erasing processes, such cards have a Lock switch on the right side surface of the card. In addition, the security of the contents of the micro SD card is guaranteed by 4C Entity LLC, which was the first to develop and apply the original CPRM (Content Protection for Recordable Media) encoding technique.

Such know-how partially prevents misuse memory cards, but also complicate the life of their owners.

Troubleshooting removable media problems

Formatting

During formatting, the process of extraordinary marking of the information storage area starts. A negative property of this procedure is that at this time all existing files from the media are irrevocably erased.

Why format a flash drive?

Reasons why you should format a flash card:

presence of viruses;
inability to write a large file to the media;
fight against slow work devices ( low speed data transfer).

Formatting can be quick and time consuming. The most popular method is simple quick formatting, when this process is launched by right-clicking on the flash card icon. In the context menu that appears, select the “format” command.

5 ways to format a flash card

We offer a choice of 5 simple ways to format a flash card:

What do you need to know to unlock removable storage media?

Mainly for encryption removable drives BitLocker is used. It is important to note that it is only available for Windows 8.

Also for operating system Windows, you can use a tool called Repair. This simple device can easily cope with unlocking a flash drive or micro SD card.

If the previous options were not successful, you can use one of the newest options - JetFlash Recovery Tool. Unfortunately, this application restores the original settings of the media, so all information from it is lost. You can download the application from the link to JetFlash Recovery Tool. Install and launch it. In the window, select the flash drive that is not working correctly and press START. The media will begin formatting. After this, it should be removed using a safe method.

Let's look at the most effective way. You can remove protection in the Windows Registry Editor. To launch the registry editor, press the Windows + R keys on your keyboard, then type regedit and press Enter. Opening HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies. It is necessary to change the value in the WriteProtect data from 1 (this means write protection) to 0 (remove protection). At the end of the procedure, save the changes, turn off the flash drive and restart the computer.

Methods for preventing problems with removable media

Conclusions

We have reviewed all the most popular and effective methods troubleshooting problems with removable media.

The reader can only choose the method that suits him. However, the more important information is stored on a flash drive and the more often you use it, the more careful you should be with this device. Because most of the breakdowns occur precisely due to the “human factor”.

Therefore, before taking out a flash drive, memory card or hard drive from electronic device, use safe removal. This prevents many problems with removable storage media from occurring. And if flash or SD cards start to work incorrectly or are not displayed, this can always be corrected with the help of a properly selected “treatment”.

Guide to removing write protection from a USB flash drive.

Navigation

USB flash drives and microSD memory cards are widely used for temporary storage of data. The files stored on them are easy to delete, but they often leave behind a lot of invisible garbage, which clogs the memory and slows down the reading of information on the USB drive. For deep cleaning memory users resort to formatting flash drives. But quite often, while formatting a flash drive, a notification pops up informing you that it is write-protected.
In our article we will try to figure out how to bypass the protection of a locked flash drive or memory card.

A similar message about disk security can pop up for various reasons, and not only when trying to format a flash drive. It happens that a USB drive has served you well long time faithfully, but one fine day, when you try to transfer files to it or, conversely, take them from it, such a notification appears. Let's look at the main reasons why such a nuisance can happen:

Physical blocking

Many USB flash drives and memory cards have a small fuse on their case. It is a standard slider switch that is easy to miss. If you move the switch to a certain position, it will act as a fuse and will not allow you to accidentally delete data from the flash drive. Carefully inspect the body of the flash drive for the presence of a switch slider. If there is one, move it to a different position and try to repeat the procedure for deleting files from the USB drive.

New flash drive

If you purchased a new USB flash drive or microSD card, and while writing files to it you receive a message about the security of the disk, then it is most likely that your device was previously formatted in an ancient file system FAT32. To restore order in the file system, it will need to be formatted in the format NTFS. We'll talk about this a little later.
Other possible reason such an error occurs when using a new flash drive - a virus. Before you, the store clerks where you bought the flash drive could have used the drive and placed a malicious program on it. Just in case, scan your computer and flash drive for viruses with any available antivirus program.

Physical damage

Quite often the reason for the notification is “ The disc is write protected» is associated with physical damage to the drive. Perhaps, due to a strong impact of the device on the floor, the contact fell off or microcracks appeared. The worst case scenario is damage to the memory chip from impact or natural wear and tear. If, in the case of a fallen contact, you can recover data from a flash drive using special equipment, then if the chip is damaged, you can say goodbye to it.

How to format a write-protected flash drive using standard Windows operating system tools?

Before resorting to using a third party software, you need to try to break the write protection using Windows tricks. Do the following one by one:

Step 1. Expand menu " StartExecute" In the window that opens, enter “ cmd" and click " Enter" to activate the command line.

Step 2. In the window that opens, you will need to write the command “ diskpart" and press " Enter» to start a service that works with computer disks.

Step 3. A new window will open where you will need to write the command “ list disk" and press " Enter» to display existing sections hard drive and USB media. Your flash drive must first be connected to the computer.

Step 4. A list will appear on the monitor hard sections disk and connected storage devices, each of which is assigned its own number. In the same window, write the command “ select disk H", where instead of " H“You need to put the number under which your flash drive is located. Click " Enter».

Step 5. Once the flash drive is selected, enter the command " attributes disk clear readonly» to clear its attributes. Remember that all files from it will be erased. Click " Enter».

Step 6. Next, enter the command “ clean" and click " Enter» to clean up the disk.

Step 7. Since the flash drive has a file system format FAT32, we need to reformat it into the format NTFS. To do this, write the command “ format fs=ntfs" and click " Enter».

Step 8. The flash drive is formatted and now all that remains is to assign it a letter under which it will be displayed on the computer. To do this, write the command “ assign letter=K" and click " Enter" Instead of " K» You can set any other letter.

If this procedure does not lead to positive result, that is, it is likely that the USB flash drive has a slightly different write protection system, which can be removed through the Group Policy Editor. To do this, do the following:

Step 1. Expand menu " Start" and left-click on the item " Execute" In the window that opens, write “ gpedit.msc" and click " Enter».

Step 2. In the window that opens, go to “ Computer configuration", then " Administrative Templates", then " System" and further in " Access to removable storage devices" In the window on the right, find the line “ Removable drives: Disable recording"and look carefully at her condition. If recording prohibition is activated, double-click on the line to bring up the menu and set the status to “ Disabled" To finish, click the " OK».

Unfortunately, standard means Windows cannot always solve this problem. Sometimes you have to resort to third party utilities, designed to recover and format USB drives. It is best to use the utilities, the disk with which is sold complete with the flash drive. But if you don’t have it, you can use the program HUDS Format Tool which is possible.

To format a flash drive using this program, connect the flash drive to your computer, download and run the program. In the window that opens, select your device from the list, set the file system format " NTFS", check the box next to the line " Quick formatting " and press the button " Begin" After completing the formatting process, the flash drive should again be usable.
If none of the above methods helped you, then most likely the problem lies in physical damage devices and the only way out of this situation is to purchase a new USB flash drive or memory card.