How to refill HP CE285A cartridge? Detailed instructions! Refilling the HP CE285A cartridge at home Refilling the ce285a hp cartridge.
Laser cartridge HP 85A (CE285A) incredibly popular in the domestic office equipment market. Because it is compatible with a whole galaxy of proven printing devices HP LaserJet PRO series M And P:
- P1100ser / P1101 / P1102 / P1103 / P1104 / P1106 / P1108 / P1109;
- M1130 MFP / M1132 MFP / M1136 MFP / M1137 MFP / M1210 MFP / M1212 MFP / M1213 / M1214 MFP / M1216 MFP / M1217 MFP .
In pursuit of savings, many users prefer to refill cartridges themselves, even without proper experience in servicing office equipment. HP CE285A not an exception.
In order for you to maintain the functionality of your printer, eliminating unintentional breakdowns, use the instructions for beginners in strict accordance with the step-by-step algorithm of actions.
Tools and Supplies
- 70-80 g quality toner;
- napkin lint-free;
- curly screwdriver or screwdriver;
- cleaner internal elements of the cartridge (can be replaced with Mr. Muscle);
- vacuum cleaner with toner filter, in his absence - plastic bag and miniature brush for cleaning the waste bin;
- if the cartridge is refilled repeatedly, then after 2-3 refills it is recommended to replace it photoconductor, otherwise your prints will turn out bright.
What toner to refill HP CE285A?
Saving on toner is strictly prohibited. Not only do you risk losing print quality, but questionable ink powder can significantly accelerate the wear of the internal elements of the cartridge.
Detailed instructions for refilling HP 85A (CE285A)
The instructions consist of two parts:
- disassembly and subsequent refilling of HP CE285A with toner;
- and laser cartridge assembly.
DisassemblyHP 85A
Step #1.Remove the side cover of the cartridge by unscrewing the bolts with a screwdriver or screwdriver.
Step #2. On the side cover, cock the spring to its original position as shown in the image.
Step #3.Open the protective shutter of the photodrum and separate the consumable body into two parts.
Step #4. Carefully remove the image drum. Rub the remaining toner along the entire length of the spare part to prevent the squeegee from turning inside out when starting printing.
Step #5. Also carefully remove the corotron (charge shaft).
Step #6.Unscrew the screws on both sides to remove the squeegee.
Step #7. Clean the waste ink bin using a vacuum cleaner with a toner filter or a mini brush, carefully pouring the contents into an airtight plastic bag.
Step #8. Reinstall the squeegee. Replace the corotron after wiping it with a lint-free cloth from Mr. Muscle and wait until the part is completely dry.
Step #9. Install the photo drum. If the cartridge is refilled more than three times, we recommend replacing it with a new one.
High-quality compatible photoconductors can withstand about five refills, the original one - no more than three. This will be followed by a sharp decrease in print quality.
The first part of the cartridge is ready, take on the second.
Step #10.Unscrew the screw at the indicated location. Then remove the side cover.
Step #11.Remove the magnetic shaft rod.
Step #12. Remove the magnetic shaft cover by pushing it out in the direction of the arrow.
Step #13.Clean the magnetic roller shell of toner and treat it with Mr. Muscle.
Step #14.Clean out any remaining toner in the hopper using a vacuum cleaner or brush.
Step #15. Shake the toner container and pour 70-80 g into the hopper.
Step #16. Reassemble the second half of the cartridge in reverse order. And be sure to turn the magnetic shaft a couple of turns!
Cartridge assembly HP 85A
Step #1. Connect both halves of the cartridge.
Step #2. Align the springs.
Step #3. Install the side cover and release the side spring from the drum curtain, which was cocked in the second disassembly step.
Step #4. Tighten the screw from the side curtain.
Step #5. After assembling the cartridge, rotate the photodrum in the MANDATORY ORDER. Otherwise, the squeegee may turn out.
If the photoconductor is new, then sprinkle it with toner.
These are the instructions for refilling the cartridge HP 85A (CE285A) has come to an end. Check the printer's functionality!
Urgent refilling of HP cartridges is required in Moscow? MosToner service center - free visit of a technician within the Moscow Ring Road 24/7!
The question of how to refill an HP ce285a cartridge often arises among users of such printing devices. Of course, in the absence of the necessary practical training, it is better to contact a specialist. But the procedure is simple, so you can simply use videos on the Internet and advice from other users.
Preparation of the procedure
Be sure to stock up on equipment:
- - syringes and needles;
- - napkins or paper towels;
- - alcohol or its solution.
The working surface is pre-covered with paper so as not to stain it with ink. If you decide to refuel cartridge hp ce285a, then make sure that you do not need to use a washing mixture to remove dried particles.
To refill, use a special drill to enlarge the holes under the front panel sticker through which ink will be supplied.
Step-by-step refueling is shown in the figure:
How to carry out the procedure quickly and smoothly?
When refilling cartridges, be sure to monitor the order of colors to prevent mixing. Using a syringe, ink is supplied to the ce 285 a cartridge. Do not allow the filler to pour out, and especially not to come into contact with the surface of the device. Excess ink is easily pumped out with a syringe.
Refilling the CE 285 A cartridge ends with the removal of contaminants, which is why alcohol is useful. You cannot immediately begin to fully use the device. A test run of the equipment is required.
To refill the HP ce 285 A cartridge, ink must be purchased at specialized outlets. Thanks to high-quality filler, you can use your printing device longer.
Instructions for refilling the HP CE285A cartridge
Detailed photo report on refilling the HP CE285A cartridge for HP laser printers and multifunction printers
The HP CE285A Cartridge is compatible with the following HP products:
LaserJet/LJ-P1100ser
LaserJet/LJ-P1101
LaserJet/LJ-P1102
LaserJet/LJ-P1103
LaserJet/LJ-P1104
LaserJet/LJ-P1106
LaserJet/LJ-P1108
LaserJet/LJ-P1109
LaserJet Pro /LJP-M1130ser
LaserJet Pro/LJP-M1132
LaserJet Pro/LJP-M1136
LaserJet Pro/LJP-M1137
LaserJet Pro /LJP-M1210ser
LaserJet Pro/LJP-M1212
LaserJet Pro/LJP-M1214
LaserJet Pro /LJP-M1217 (The model range may be expanded)
Unscrew the screw from the side and remove the cover
view of the cartridge with the cover removed 
Separate the cartridge into two halves (see photo below) 
We remove the photoconductor to clean the waste toner bin 
Remove the squeegee by unscrewing two screws. And we delete the processing. After cleaning, you can put everything back in place. 
Now you need to clean and refill the toner cartridge. First, remove the magnetic shaft. 
To remove the magnetic shaft, you need to unscrew the screw and remove the side panel. 
Carefully remove the side panel, shaking it slightly. 
Now you can remove the magnetic shaft. 
We unscrew two screws to remove the dosing ruler and clean it. 
Any toner stuck to the ruler should be cleaned with acetone. If the ruler is not cleaned, the print quality of the cartridge will deteriorate with the appearance of faint streaks. It can also be replaced with a new one. 
We will do the same with the magnetic shaft. It also needs to be cleaned. 
Before you can reassemble the toner cartridge, you must refill it with new toner.
after refilling and assembling the toner cartridge. Turn the magnetic roller a few turns away from you - the toner should be distributed evenly on it. 
Reassemble the cartridge in reverse order. After installing the side cover, install a spring as in the photo below so that the photodrum cover can automatically close. 
Refilling the HP 85A (CE285A) cartridge! How it works?
In order to provide the highest quality services to our customers, the 24-hour service center "MosToner" refills the laser cartridge HP 85 A (CE285A) produced in just 4 steps:
- STEP #1. Place an order at any time convenient for you
- STEP #2. Free visit of a specialist within the Moscow Ring Road
- STEP #3. Free diagnostics of the cartridge and its subsequent refilling
- STEP #4. Cash or non-cash payment upon completion of work
On a note! Servicing cartridges HP from MosToner specialists, you save not only your money, but also time. For example, the refueling procedure CE285A takes no more than 10 minutes!
Get a discount on HP 85A (CE285A) cartridge refills
The MosToner service center offers some of the most affordable prices for cartridge refills in Moscow. But nevertheless, you can always count on additional discount, if you find a similar offer at a lower price.
For regular customers and wholesale customers we have special loyalty programs. For details, please use the form or call the contact phone number.
To receive up-to-date information about current promotional offers, it is not necessary to regularly monitor news on the main page of the site; to do this, just subscribe to the newsletter in the corresponding menu at the bottom of the screen.
Also, the MosToner service center regularly gives promotional codes to our clients with individual discounts, with which you can save from a couple of hundred to several thousand rubles, depending on the frequency and cost of orders.
Attention! Promo codes must be entered during checkout as shown in the image.
