How to burn a flash drive using ultraiso. How to make bootable media using Windows tools
It is no secret to many that UltraIso is one of best programs for recording Windows images of all versions onto a USB flash drive. That is, in essence, with its help you create in just a few clicks bootable USB flash drive from iso image. You will learn how to do this in this article.
It is also one of the best programs for burning a Windows image to a USB flash drive.
So, to begin with Windows records 7 on a flash drive via ultraiso we launch the program. The main window opens in front of us.
UltraIso main window
In it, select “File” -> “Open”.
Open the windows image
In the window that opens you need to select Windows image, which will be written to the flash drive. You had to download it in advance, for example on the Internet.
Selecting an image to burn
Select the iso image and click the “Open” button.
Now we insert the flash drive on which our image will be written to the USB connector.
Attention. There should not be any data important to you on the flash drive, since all of it will be destroyed during formatting.
Let's go directly to recording in UltraIso
A window will open in which you need to check that the flash drive you need is being used, and the recording method should be “USB-HDD+” and all other parameters as in the figure below.
Setting the parameters for writing a Windows image to a USB flash drive
First, click the “Format” button. In the window that opens, select the “FAT32” file system and check the “Clear table of contents” checkbox.
Preparing a flash drive for writing Windows to it
After a few seconds, the flash drive will be formatted. Click “Ok” and close the formatting window.
Now, in order to burn Windows 7 to a flash drive via ultraiso, click the “Burn” button and in the window that opens, click “Yes”.
Data Deletion Warning
Burning Windows 7 to a USB flash drive via ultraiso
The recording process will begin. After which you will need to close the Ultraiso program and your bootable flash drive will be ready for use. All you have to do is boot from the flash drive and you can start installing Windows.
The recording time depends on many parameters, ranging from the capacity and speed of the flash drive, ending with the volume of the image that you write to it. But on average, within 15 minutes your bootable Windows USB flash drive will be ready.
Now you know how to use UltraIso - Programs for writing windows to a flash drive to write Windows 7 and thereby make a bootable flash drive from an ISO image.
It is convenient to backup or duplicate data from any media with using ISO–files. An image containing a copy of documents and file structure, easy to reproduce if necessary and apply in the absence of the original. All that is needed for this is to write the file onto a storage medium of suitable size, for example, a flash drive. To ensure that the image is read correctly later, use third party software UltraISO. Let's find out how to correctly write an image to a flash drive via UltraISO, and what difficulties you may encounter in the process.
Install the program and download the ISO file
A tool for working with ISO files (creation, analysis, editing) UltraISO is not built-in for any operating system. To use it, you must first download the program and install it on Drive C (System, System, Local C). The software is distributed online for free and is convenient because it has a Russian-language interface. After downloading the tool for UltraISO recordings, install it:- Double click on the downloaded item;
- In the “Installation Wizard” select “Next”;
- Click on “I accept...” and select “Next” three times;
- IN " Additional tasks» select “Next” again;
- Click “Install”;
- Select “Finish” by unchecking the “Run...” menu.
How to properly download an image?
Let's assume that a PC user needs to make a bootable USB flash drive for Windows 10. We also assume that an ISO file from the original media has already been made and saved on the hard drive. Loading it into UltraISO is done like this:
Confirmation that the image has been loaded into the program will be the copied objects that appear on the right side of the program window. If they are not there, the procedure should be repeated.
Burning an image to a USB flash drive
Before recording, you should check the flash drive for storage on it important information. Once the procedure is completed, it will no longer be restored. To record, do this:
We wait until the recording process is completed. It will take some time. If the procedure was performed incorrectly or there are failures in the process, the program will definitely notify the user about this. But if you strictly follow the instructions and correctly create the ISO file, there will be no problems.
Often installing the Windows operating system from a USB flash drive is the only way possible solution for owners of devices (netbooks, nettops and others) that do not have a disk drive, and external USB drives, although they are most widely used in the consumer electronics market, are still not available to everyone. In addition, this method is largely justified and has a number of advantages (compactness, reliability of data storage, high speed reading) even in comparison with the traditional installation method with a CD\DVD drive.
So, in order to install Windows on a nettop or laptop (netbook) in the absence of a disk drive, or if you just want to have a distribution kit with a particular release of the operating system always at hand, you will need to burn a bootable USB flash drive. One of the simplest, and most importantly working, options is to write Bootable USB flash drive using the UltraISO program.
Despite the fact that the program belongs to the category of shareware, the free (trial) version of UltraISO (Russian version) is quite suitable for creating a bootable flash drive with an operating system; you can download the program.
Next, as an example, we will consider the process of creating a bootable USB flash drive for the 64-bit Windows 8.1 OS. Please note that the method described here is only suitable for Windows 7 and Windows 8 operating systems; for Windows XP the process is slightly different.
Download and run the program, this window will appear, select here “ Trial period …».
The main program window will open, select from the menu: File → Open,
after which we find an image file with the extension .iso (or may be different: IMG, MDF, NRG, etc.) in Windows Explorer(it is assumed that we already have on our computer’s hard drive virtual image operating system) and click “Open”.
At the next stage, select the menu item “Boot” → “Burn Hard Disk Image...”
A window like this will appear (if you haven’t inserted the flash drive yet, now is the time to do it).
Here you need to pay attention to the “Recording method” item; UltraISO developers recommend choosing USB-HDD+. It is worth explaining here that the recording method offered by the program at this step, namely: USB-HDD, USB-ZIP, USB-HDD+, USB-ZIP+, USB-HDD+ v2, USB-ZIP+ v 2, are emulation modes of the corresponding devices. For example, the main difference between the USB-HDD method and USB-HDD+ is that when using the extended mode (USB-HDD+), the bootable flash drive will be more likely compatible with the BIOS of a particular computer (laptop), etc., than when using a basic USB-HDD. In turn, USB-HDD+ v2 will ensure compatibility of your bootable flash drive with almost any, even very specific BIOS, so we recommend using it right away.
We also note that when using UltraISO there is no need to format the flash drive in advance, the program will do everything itself, the only thing is that before you insert the USB flash drive and start recording, make sure that there is no important information on it. However, after you click “Record”, the program will warn you about this with the following message.
We wait for the end of the recording process, upon completion we receive a universal bootable flash drive with which we can easily install the operating system Windows system(in our Windows case 8.1) on any computer, laptop, nettop, etc.
The actual process of installing an operating system from a flash drive is no different from that using a disk, however, in order for everything to work, you must correctly set the device boot priority in the BIOS of your computer.
Skype (Russian: Skype) is a program that allows its subscribers to make voice and video calls or chat via Internet absolutely free...
What is a disk image? This is a file in which an exact digital copy is stored file system, or data previously recorded on disk (CD/DVD/BR).
Previously, such images were widely used in backup data, but with the development of the Internet, ISO applications migrated to the category of files that are convenient to transfer over the network.
In order for the image to be used, it must be written to disk. For these purposes, many programs are used, including Alcohol, Daemon Tools, Nero, and UltraISO. We will focus on the last one, since it is very convenient and intuitive.
Most often, this software is used to record an OS image, in particular Windows. Why is this being done? Over time, any system acquires a certain amount of obscene system and user files, which consume memory, disk space and slow down the performance of the OS as a whole.
You can also use regular means Windows, for example, by recovery, but this is not always possible, so it is much easier to remove old system and install a new one. To restore, you will need a disk or bootable USB flash drive.
Let's look at the process of creating an image using an example Windows entries 8, although “seven” and other operating systems are written the same way.
Step 1. Beginning of work
To commit further actions You will need to run the program as Administrator, otherwise the system will simply not allow you to do anything.
After you have opened the program, you need to click the “open” menu as shown in the first screenshot and start creating a bootable ultraiso flash drive.
The example shows a prepared image of Windows 8. The files themselves are easy to find on the Internet, in particular, on torrent trackers. The extension must be ISO, not EXE.
As soon as you have confirmed the choice of image by clicking the “open” button, a list of used OS files will be displayed in the right window of the program. Do not delete or rename anything to avoid any installation errors in the future.
Step 2. Preparing an image for recording
Now we insert the flash drive into the connector and wait for the device to be connected and recognized.
Important: The device must be formatted in the FAT32 file system format. But if you didn’t do this, don’t worry. The program will automatically do all the necessary manipulations. If the device has necessary files, not previously copied to HDD, do this BEFORE recording the system. Otherwise, all data will be permanently erased.
When all copying manipulations have been completed, in the UltraISO window click on the “Boot” item, and in the drop-down list select the “Burn” menu image of a tough disk..."
The program will prompt you to check the correctness of the selection of the disk on which the image will be written. Re-check that everything was done correctly, and then proceed to the next steps.
The “Recording method” item should be set to “USB-HDD+”, and “Hide Boot Partition” should be set to “no”. If the flash drive was previously formatted, feel free to click “Burn”, and if you missed this point, then click on “Format”.
Step 3. Formatting a flash drive
As previously stated, when formatting, you need to set the FAT32 format, which, in theory, is specified by default, but just in case, it’s not a sin to verify this yourself. After all the manipulations, click “Start”.
A dialog box will immediately pop up warning that everything on the flash drive will be irretrievably destroyed. We agree with this by clicking on “OK”.
When the process completes successfully, a corresponding window will appear. If the message states that “formatting is NOT completed,” the flash drive is defective, so we recommend using another one, or understanding what the problems are with this one, and then repeating the process again.
Step 4. Burning an image
If everything is successful, close the dialog box and return to the “Burn image...” menu, or “Write Disk Image” and click “Burn”. A menu for final creation of a bootable USB flash drive will appear.
A pop-up window will appear again, once again warning that the data will be deleted. We agree with this and move on.
Now the fun begins - direct recording of the OS. Multiboot flash drive ultraiso began to be created , which will take some time.
The program itself works quite quickly and efficiently, but the system often slows down the entire creation process. Be patient.
Upon completion of the process, a “Recording complete” notification will be displayed in the logs! This means that our flash drive with ready Windows 8 is ready to use.
Since we no longer need UltraISO services, the program can be closed. When you connect the flash drive to the PC a second time, something similar to the one shown in the screenshot should appear.
Depending on the image, its name may differ from this. The picture shows just an example of the final version.
WITH UltraISO program familiar to many users - this is one of the most popular tools for working with removable media, image files and virtual drives. Today we will look at how to write an image to disk in this program.
UltraISO program is effective tool, which allows you to work with images, write them to a flash drive or disk, create boot drive with Windows OS, mount virtual drive and much more.
How to burn an image to disk using UltraISO?
1. Insert the disc that will be burned into the drive, and then launch the UltraISO program.
2. You will need to add an image file to the program. This can be done by simply dragging the file into the program window or through the UltraISO menu. To do this, click on the button "File" and go to "Open" . In the window that appears double click mouse select the disk image.
3. When the disk image is successfully added to the program, you can proceed directly to the burning process itself. To do this, click on the button in the program header "Tools" , and then go to "Burn CD image" .
4. The window that appears will contain several parameters:
5. If you have a rewritable (RW) disc, then if it already contains information, it needs to be erased. To do this, click the “Clear” button. If you have a completely clean blank, then skip this step.
6. Now everything is ready to start burning, so all you have to do is click the “Burn” button.
Please note that you can write in the same way boot disk With ISO image to later, for example, reinstall Windows.
The process will begin and will take a few minutes. Once the recording has been verified, a notification indicating the end of the burning process will be displayed on the screen.