How to change the wallpaper on your desktop. How to change the picture on the “Desktop”: what every user should be able to do

• Analysis of various types of errors when installing Windows 7 (including by code).
• What to do if the installer does not see the device (drive, hard drive, keyboard or mouse, etc.).

Figure 8. Selecting the volume for a partition on the hard drive

Figure 9. Partition creation confirmation window
After this, the operating system installer will notify you that it will create additional section for storing system files:

Figure 10. Installing Windows 7.
Click on the button "Further", after which the installation will begin (copying all system files and the process of setting up the OS).

The process of copying files will take 15-30 minutes and will not require any action from you.

Figure 11. Installation completion window
After copying and unpacking is completed files will happen restarting the computer.

At this point, you must remove the DVD or Flash drive from your computer, as the installation will continue from the hard drive you copied to. necessary files.

After the reboot, you will see a window indicating that the installation is complete.

Figure 12. Entering username and network name computer for the installed system.
The completion process will take a few minutes, after which it will start initial setup operating system.

Completing Windows installation and initial setup

When the setup process is complete, you will be prompted to enter a username to create your account, as well as the computer name for later network identification(under this name your computer will be visible in local networks Windows).

Figure 13. Setting a password for the account (optional).
Next, you will be prompted to enter a password and a password hint. If you want to protect access to your account with a password, enter it. Or you can skip this step by clicking the button "Further" .

Every user sooner or later faces the need to install an operating system. There is a myth that it is difficult to do this on your own, although in reality this is not the case. All you need is to have basic PC user skills and follow simple instructions, which will be discussed below.

Before installation

There are a number of points that you should take care of before starting the installation.

To do this correctly, first pay attention to the following:

• select the desired version of the operating system;
• decide on its capacity;
• prepare the hard drive for installation;
• take care of the drivers.

If you are reading this article, there will be no problems choosing the OS version - it will be Windows 7. But what about its bit capacity? How do you know which one is right for your PC?

You may encounter two types of systems:

• x86 (32bit);
• x64 (64bit).

What are their differences? 32-bit ones support up to 4 GB of RAM, and 64-bit ones support 4 GB or more. The performance of a 64-bit system is higher, so if specifications your PC allows this, you should choose it. Determining the amount of RAM on your computer is very simple - just click right click mouse on the “Computer” icon on the desktop and the necessary technical data will be displayed in the window that appears.

Important! It should be taken into account that after choosing one or another bit depth, subsequently installed programs must be optimized specifically for it.

Now you need to think about where exactly the new operating system will be installed. Most often, drive C is selected for this. However, you need to remember that all data on the disk (including the desktop!) will be permanently deleted. All important files should be moved to another drive or copied to a flash drive.

Another important point– drivers. Most often, they come bundled with the equipment on special disks, but if not, download them from the Internet in advance. Find necessary drivers can be found on the official websites of manufacturers of video, network cards and other PC components. Why do you need to take care of this in advance? Because after installation, without a driver for network card, it will not be possible to do this.

Video: Installing Windows 7

Creating a Disc

To start the installation process, you need a disk with Windows 7. If you have it, you can safely move on to the next step. If it is missing, you will have to create it first. You will need an operating system image, as well as a recording program. It is best to give your preference to “pure” MSDN assemblies that have not been heavily modified. Recording from an image is no different from working with regular disk. This can be done, for example, with the UltraISO program.

To do this you need:

Installing Windows 7 from disk via BIOS

Let's move on to the main process. It starts with working with the BIOS - basic system I/O It is the installation via BIOS that scares novice users so much, but there is nothing difficult in handling it. For our task, you only need to perform a few basic manipulations.

BIOS setup

First you need to get into the BIOS:

The process itself

After restarting, the system will launch the inserted disk and the installation process will begin:

Note! If you want to install Windows 7 from a formatted disk, then take care in advance of the safety of data that may be lost during this procedure.

The installation will begin, usually taking 15 minutes to half an hour. Upon completion, the system will prompt you to enter your username and password (optional), as well as set a hint phrase to restore them. Next you will be prompted to enter serial number, which is usually found in the box with a copy of the OS. If it is missing or the assembly does this automatically, skip this step.

There are still a few small steps ahead:

• indicate “recommended” security settings;
• your time zone;
• network type.

This completes the installation and the system is almost ready for use, all that remains is to configure it.

Video: Installation and configuration

System Setup

The first step is to activate the operating system (if this did not happen automatically during the installation process). Do not forget about this, because after 30 days, annoying reminders will begin to appear informing you that the registration period has expired.

How to check if Windows is activated:

Drivers and programs

Next the most important step is installing drivers. Their absence can lead to incorrect display graphics, incorrect operation computer and the inability to connect to the Internet. How to determine which drivers the system needs?

Windows 7 will often install a driver for the video adapter, so it won't be listed as unrecognized. Despite this, a driver for the video card is still needed, because without it it will not work at full capacity (which can be noticeable by the not entirely correct display of icons on the desktop). We install it from the manufacturer’s disk or downloaded it in advance from the official website.

Important! Don't forget to install the driver for network adapter, because without it it will be impossible to access the network.

It is worth noting that everything similar programs are quite effective and capable of securing your system. For maximum effectiveness, it is worth changing the antivirus you are using from time to time. After installing it, do not forget to activate and update to get latest versions databases that can protect against newly discovered threats.

Now you can start installing the browser. Its choice also entirely depends on the user’s personal preferences. When a new search engine is installed, the first thing to do is update Flash Player, because without it it will be impossible to watch videos or listen to music on many resources. This can be done in a matter of seconds on the official website.

Using a freshly installed browser, start filling the system with new programs that no system can do without:

• office applications ( Microsoft Office, OpenOffice);
• archivers (WinRAR, 7-Zip);
• programs for listening to music and watching videos;
• useful utilities (CCleaner);
• communication applications (Skype, Mumble);
• other software you need.

Installing any operating system is a matter that requires a thorough and careful approach. Despite this, you should not be afraid of him. Just follow the simple instructions, and very soon your PC will be able to boast a new OS.

In this publication we will look at how it is done. WITH using bios You can change the order and priority of loading the OS. BIOS settings allow you to change the boot order of a previously installed OS, which is performed automatically when you turn on the computer. Using the same settings, you can create a command with which the program windows installations 7 will begin to run automatically when you turn on or restart the computer and the previously installed OS will not interfere with its operation.

Preparing your computer for OS reinstallation

You need to save important files on removable media, personal data and passwords. You need to prepare a list of everyone in advance electronic components and computer devices. If some component or device does not work correctly after installing Windows 7, then most likely it will be necessary to install a driver for this device designed to work with Windows 7. After installing the new OS, it will be necessary to install all important and necessary programs again. Can be saved important information and on the computer itself, using a pre-prepared partition for this hard drive, which does not need to be defragmented and formatted when reinstalling the OS.

Data that you do not want to lose when reinstalling the system can be saved on another logical drive, for example, as in in this example- on disk I:

Preparing media with the Windows 7 installer

Before installation, you will need to enter into the bios an indication of the boot priority of the device from which Windows 7 will be installed. This can be any removable media, hard drive, memory device or disk where the installation program is located.

How to enter BIOS

To do this, you need to press a certain key when turning on, or restarting the computer before the old OS starts loading. The right combination keys must be specified in the documentation related to motherboard computer. Often there are options with F keys (F1, F12, F4, or other F).

Finding settings responsible for boot priority in bios

After you have managed to enter the bios, you need to find the settings that are responsible for boot priority. These settings may be located in the Advanced, BIOS FEATURES SETUP, Advanced BIOS FEATURES, Boot sections, depending on the bios itself, since computer manufacturers may use bios with different interfaces. You need to find the item First Boot Device, or Boot Device Priority, which contains settings for controlling the boot priority of the 1st Boot Device and 2nd Boot Device.

Setting boot priority

In order for the device hosting the Windows 7 installer to have priority when booting the computer, you must designate this device in the 1st Boot Device section. You can set the second boot priority HDD. Now you need to save the changes bios settings. To do this, you can use the corresponding key located in the bottom line of bios, or call the panel for saving settings using the Esc key, and then confirm the changes with the Y key. You can not change the settings in the bios and force the program to work before starting the old OS by pressing the F9 key during the reboot.

Reboot the computer and confirm that installation has started from the media

After changes were made to the BIOS about the priority of booting from media containing installation program for windows 7, you can restart the computer and give the command to start loading from required media. This will be possible to do within a few seconds, after a prompt appears on the screen to press any key and confirm permission to start loading from the desired media.

In this lesson you will learn how to change the picture on the screen
monitor (Wallpaper on the Desktop) manually, and also how to do so,
so that these pictures replace each other in automatic mode through
specified period of time.

To change the wallpaper on your desktop, you first need this picture
get it somewhere. The fastest and easiest way to get a beautiful picture
is to download it on the Internet.

There are many sites that provide free
downloading a huge variety of beautiful wallpapers, and to find one
site, you just need to enter the phrase “download wallpaper” and select the site you like.

By going to this (or similar) site we can choose the one we like
us the picture and quickly download it to your computer. But so that the picture
looked realistic on the monitor screen (without stretching) you should
know what resolution your monitor supports. To find out
Properties. Next go to the tab Options and remember your permission:

Now that you know what wallpaper (in what resolution) you need, you can start selecting and downloading the wallpaper you like.

When the required number of wallpapers has been downloaded to specified folder(or by default to the folder My drawings)
let's change the picture on the desktop. This is done simply -
right-click on the Desktop and select Properties. Next go to the tab Desktop, select the desired picture from the list Background image (1) and click on the button Apply(2):

If there are no new pictures in the list, then use the button Review(3) find the folder where you downloaded your pictures and select new pictures there so that they appear in the list.

As you can see, everything is very simple.

Now let's talk about automatic change wallpaper on Desktop
table. There is nothing complicated here either, but for this we need
a special program that will do this. For example, the program Vetton Wallpapers, which you can download for free.

The program is small and very simple.

After installing and launching the program, you will be taken to the main window
programs where first of all you will need to create a list of those
wallpaper that will change on the desktop.

To add the desired picture to the list, click the button Add and in the menu that opens, select the item File or Folder(depending on what you want to add):

Thus, by repeating these steps several times, we create a list of pictures that will change.
All that remains is to start the program with the button Start changing wallpaper (1):

Well, briefly about the rest of the program buttons:

2 - button Change wallpaper. Changes wallpapers one by one by selecting them from the list.

3 - button Shift setup. Allows you to configure program functions, for example, set the time period after which the wallpaper will change.

4 - button In random order. The wallpaper from the list will change in random order.

5 - button Download new wallpapers. Allows you to download wallpaper directly from the program when connected to the Internet (from the official website of the program)

6 - button View in full screen.
Click on this button and the wallpaper selected in the list will be expanded to
full screen (for viewing). Clicking the screen again takes you back to
program.

7 - button Exit. Closes the program.

8 - this is a list of those wallpapers that will replace each other on the Desktop.

That's all I have!

Change your wallpaper, make your computer life more varied and colorful, and it will definitely improve your mood!