How to log into a Huawei router. Setting up an Internet connection from Rostelecom, UkrTelecom, ByFly

Facebook

In order to connect a Huawei router,

let's do the following step by step actions. With the back of the router facing you, you need to:

Connect the Internet wire coming into the apartment to the blue socket of the router, called WAN;
Next, you need to connect the wire from the computer to the router into any of the four sockets, they are named LAN1, LAN2, LAN3, LAN4. Can be used both for a computer and for a TV and other equipment that can be connected;
In the Power connector, you need to insert the power cord and plug the device into the outlet;
We also see here the WPS or Reset key, which helps if you have forgotten or don’t want to enter the password, but you need to be near the router, or you need to reboot it. All you need to do is press this key;

We are done with the router connectors and its connection to the computer and network.

Let's go to settings:

Go to the browser and enter the code: “192.168.1.1” - this is the provider firmware;

Since the computer is connected wired connection, then in the window that opens, in the fields that appear (username and password), enter, for example, the same word “Kievstar”

Next, a menu appears with three blocks:

— run;

— WI FI setup;

— checking the network status;

You can immediately use the setup wizard by clicking on this block. Your next steps will be described step by step in the setup instructions on the screen. You can press the button automatic connection, or manual mode button;

We will start with the wi-fi settings block, since the default is DHSP, which is used in our network;

A window opens where the SSID is written - this is the name of the network and its password, which consists of at least 8 characters and can be viewed by checking the required box. There are also buttons to enable, disable the network and save, which we need to click on to save our data.

Next is the Internet tab, where we can see all the addresses, DNS service, and so on, and you can set up parental controls right there.

7.2.View all devices that have ever been connected.

7.3.View the interface, where it will be written which input (LAN..) is occupied, mac-address, ip-address and their settings.

7.4. Wi-Fi settings, where you can configure everything at your own discretion, turn the wireless network on and off, change its name and some other functions. Here you can put the hide network icon, then no one will see it and to connect to it you will need to enter not only the password, but also the name that you specified.

7.5. IN additional settings It’s better not to change anything, since everything is set to “auto” mode and connects on its own, adapting to your Internet provider.

7.6. Access to wi-fi networks, here you can put an icon on VPN connection, by pressing a button. This means that you do not need to enter a password to log into the network; you just need to press the button on the back of the router, as mentioned earlier. Allow all devices to connect to the router.

7.7. Guest networks, you can configure a guest network that will not have security or will have it, but minimally;

Maintenance tab. All settings that you have configured are shown here, either in automatic mode network. For example, you can quickly and easily see which input (LAN..) your computer is working on and what other devices are connected to this router and which input. Information about network activity is shown, how much is entering and leaving the router.

You can also check the network status. By clicking on the “check network status” section, a window appears showing which devices or appliances are connected to the wireless network. IN in this case we see that two devices are connected to this wireless network. Laptop and Android. The Earth icon indicates the Internet gateway, the next one is the router, when you click on it you can get full information about: IP address, mac address, device ID, AO version, software version.

There is a sticker on the bottom of the router. It indicates all the data on the router, name, modification, energy consumption, country of origin, and so on.

One day, an inexpensive, high-quality product appeared in the line of modems. modern model, thanks to the presence of two antennas, ensuring signal quality throughout the home (and as practice shows) and beyond. Let's look at how to configure the HUAWEI HG8245A or HG8245H modem.

First of all, the modem needs to be connected to the PC. This is done using the wire that comes with the device. One of the ends is connected to the LAN port (this is the port through which the connection to the local network is made). The second is to connect to a computer (laptop).

After connecting to address bar running browser (any one that is available), you need to enter 192.168.100.1 (this is the default IP address of these modems). Recommended browsers - Internet Explorer, Yandex, Firefox.

In response, a window will appear asking for your login and password:

Possible options for login/password:

With the login “telecomadmin” the possible values for the password are:

Admintelecom (for a comprehensive reconfiguration of the terminal);
NWTF5x%RaK8mVbD;
NWTF5x%;
nE7jA%5m;

Or the login/password combination -root/admin (to change the settings of the Wi-Fi network only).

If such a window does not appear, check other data in the network card settings:

After checking and typing the login and password, we get to the menu for debugging the functions of the optical terminal and begin configuring.

Settings

Includes moving and setting data across several folds (pages):

WAN tab

Setting up the HUAWEI HG8245A modem begins by moving to the “WAN” page.

It should be marked:

Connection via 4_INTERNET_R_VID_10;
WAN Mode: Route WAN value;
User Name: your contract number;
Password: ;
There should be a checkmark next to SSID1;
The settings are saved by clicking the “Apply” button.

LAN page

On this tab:

At the top left of the panel you need to select “DHCP Server...”;
Tick three top lines: “Enable primary...”, “Enable DHCP...” and “Enable Option 125”;
Enter the values for “Primary DNS” as in the picture;
We do the same with the value for “Secondary Server”;
Confirm your entry by clicking “Apply”:

For our Bayflymodem it is done from the WLAN tab. In it:

Check the box at the top next to “Enable WLAN”;

The “SSID Name” field must contain the name of the Wi-Fi network;

There are checkboxes next to “Enable SSID”, “Broadcast SSID” and “Enable WMM”;

The “Number of Associated...” value indicates the number of simultaneously connected devices;

The remaining fields must match the picture;

Clicking the “Apply” button will save the entered settings:

After reading our article, you already realized that setting up the Byfly Huawei HG8245H modem is not particularly difficult.

Customize, leave comments about your successes, and share them with friends.

Connecting to the Internet via a fiber optic cable requires the use of appropriate equipment on the subscriber's side. In some cases it has to be configured to suit the user's needs. In this article we will consider one of such cases, namely setting up the Huawei hg8245h router to work in the Rostelecom operator network.

There are quite a lot of devices that receive the Internet via an optical cable, each has its own strengths and weaknesses. This Rostelecom router from Huawei has quite rich functionality for this class of equipment.

Basic technical capabilities terminal:

Functions as a wireless access point in accordance with 802.11b/g/n standards.
Support USB2.0 and 1.1.
Possibility of receiving/transmitting voice VoIP technologies via an optical channel.
Features of a standalone DHCP server with support for NAT, DMZ and DDNS.

On the back panel of the Huawei hg8245h Rostelecom router there are 4 LAN connectors for connecting client devices via Ethernet technologies, two ports for Rj-11 telephone connectors, a power button, next to which there is a connection point network adapter. The hg8245 modification has an optical port on the same panel, unlike the hg8245h, which has it at the bottom. In addition, all models have the ability to connect USB drives, for which there is a corresponding connector on the side or back, next to the “Start” button.

Setting up a router - video version

Logging into the router and starting settings

Before you start setting up Wi-Fi router Huawei hg8245 from Rostelecom needs to reset the configuration to the factory state. This procedure should be performed if the device was in use and its default settings were changed. Reset is carried out using the “Reset” button, which must be pressed and held for 10-15 seconds.

You can change settings either through a cable connection or via a wireless channel (to do this, you need to turn it on using the “WLAN” button on the side). In the case of a wire, you need to make sure that the PC’s network options allow you to detect the router. In most cases, no manipulations are required, but sometimes when you try to log into the hg8245h admin panel, the browser returns an error like “Page is unavailable.” To fix it, you need to go to the network settings, find the properties of the IPv4 protocol and specify receiving dynamic addresses DNS and IP.

So, insert one connector of the LAN cable into the PC port, the other into any LAN port of the router. The wire is supplied with the equipment, but any other can be used (except for rare exceptions when the connectors are crimped to connect two PCs directly). Next we perform the following steps:

We plug in the PC and router (if not already plugged in).
We launch any Internet browser, for example, Opera.
We write 192.168.100.1 in its address bar and press “Enter”; the exact address of the Rostelecom router can be found on its bottom panel or from the operating instructions.
The huawei-hg8245h user authentication page will open, where you need to enter your login and password, which by default has the values “telecomadmin” and “admin” (exact authorization data can be found from your provider or in the instructions).
If everything is entered correctly, go to the Huawei router and perform further network configuration.

As mentioned above, you can enter the admin panel of the Huawei terminal not only through cable connection, but also via Wi-Fi. The sequence is the same as for cable connection, with the difference that the browser must be launched on a smartphone or tablet.

Important! Using wireless connection You can perform the same manipulations with the router as via cable, with the exception of updating the firmware. An attempt to flash the firmware via WI-FI will inevitably lead to the device losing its functionality without the possibility of warranty repair.

Setting up an Internet connection with Rostelecom

After successful authentication, the terminal status page will open. To further configure the Huawei router, go to the WAN tab and click New. If there are any connections on this tab, delete them (before creating a new one). On the page of the newly created connection, activate the WAN mode (check the Enable WAN checkbox)

PPPoE

Select PPPoE in the menu on the left “Encapsulation Mode”.
Set the “Mode” parameter to “Route”, this parameter allows the equipment to distribute the Internet to other devices.
In the “Service List” column we indicate the type “Internet”.
To connect via this standard You must enter the login/password provided by the provider.
On the same page we indicate the WLAN ID, which we also find out from Rostelecom.
Save by clicking “Apply”.

If all data is entered correctly, initial setup The Huawei router can be considered complete; communication with the Rostelecom network should appear after saving the changes.

Setting up Wi-Fi on the Huawei hg8245h router

When the initial configuration for the Rostelecom network is completed, you can change the parameters on the configured router wireless channel. First of all, you need to change WIFI password. To do this, go to the WLAN tab, put a tick in the checkbox that activates wireless transmission data and fill out the fields below:

Network name (SSID-Name) – any Latin alphabet and numbers (optional).
Authentication – WPA/WPA2.
Encryption type – TKIP/AES.
Change the password on a wifi router Huawei Rostelecom you can by specifying it in the “WPA PreSharedKey” field, it must be at least eight characters using numbers.
Save the changes by clicking Apply.

After you have changed the configuration of the wireless network, you can connect to it using the new authorization data. That is, you need to select from the list the network with the name that was specified in the SSID-Name field and connect to it using a new password.

Setting up IPTV on a router

Setting up a Rostelecom router for broadcasting interactive television happens as follows:

Go to the WAN tab and create another connection (click “New”).
Select the operating mode for Iptv – Bridge.
Turn on Enable Vlan.
In the VLAN ID item we indicate the ID provided by the provider (VLAN value for IPTV), and enter the same value in the Multicast VLAN ID field.
Binding options: We put a tick in the checkbox of the port into which we plan to connect the cable of the TV set-top box.
Confirm by clicking Apply.

But that's not all. Setting up Huawei traffic optimization. To do this, go to the “Network Application” -> “IGMP Configuration” tab. On the page that opens, in the field opposite “IGMP Enable”, indicate “Enable”, and change the “IGMP Work Mode” option to “Snooping”. Confirm by clicking on the “Apply” button.

After all the above-described manipulations on the router, there will be no problems with how to configure the Huawei router to work on the Rostelecom network. You may need to reboot the equipment, but otherwise everything depends on the provider.

The products of the Chinese company HUAWEI have gained popularity all over the world, and this is not surprising - they have enviable reliability, high performance and excellent quality. HUAWEI HG8245h is another development from this company, which allows you to organize access to the network. This optical router allows you to configure the Internet using PON technology. Let's take a closer look at what features the device has and how to flash it.

Provider Rostelecom issues routers for its clients

presence of a USB port;
the device can be located at a distance of up to 20 km from the transceiver module;
Wi-Fi;
2 POTS ports;
2.8*17.6*12.8 cm;
0...40 degrees Celsius;
H.248, SIP protocols;
4 Ethernet ports;
filter by URL, IP addresses, MAC addresses;
port forwarding;
802.11 b/g/n;
auto-adaptive port;
VoIP, NAT;
60 thousand hours of adapter operation.

According to the manufacturer, the terminal is capable of operating for 23 years, and the maximum power it consumes is 15.5 W.

It is the HUAWEI HG8245h that is issued by the provider Rostelecom for its subscribers. The full name of the product is Echolife HGF8245h.

On the side of the device there are keys for WPS, reset, and Wi-Fi on/off. In addition, here you can see a BBU connector, designed for connecting a backup battery, as well as a USB connector. You can assess the battery charge level directly from the terminal interface.

Connection

Before you start experimenting with the router settings, the device should be connected to the PC and the network. To do this, connect the provider's wire to the router's optical port (located on the left). You can connect to a computer using Ethernet using a patch cord: one end of it is connected to network card PC, the other - into the LAN port of the terminal. Ports TEL2 and TEL1 are used if the network is configured for SmartTV or IP telephony.

Internet setup

First you need to open your browser and enter “192.168.100.1” in the line. Using this path you can enter the interface of the HUAWEI HG8245h router. The system will prompt you to enter your password and login. Under the parameters telecomadmin/admintelecom you can run full customization equipment, and root/admin will give you the opportunity to change Wi-Fi settings.

Once logged in, go to the “Lan Port Work Mode” item in the “LAN” section. Our task is to select the ports that will be used to connect the network. It is best to check all ports at once, but to IPTV usage services, you will need to leave the last port for the set-top box.

Having done this, go to “WAN” and enter the following parameters here:

Enable WAN;
Service List - Internet;
Mode - Route;
Binding options - SSID1;
Enable VLAN;
IP acquisition mode - PPPoE;
Enable NAT;
username/pass - enter the information provided in the contract (if the document is lost somewhere, call support);
Dial Method - Auto.

Don’t forget to also enter the VLAN ID, without which you won’t be able to create an Internet connection. A technical support specialist will tell you the correct ID. The configuration should be saved through the “Configuration File” item in the “System Tools” section.

IPTV

To set up IP television from Rostelecom for the HUAWEI HG8245h router, we recommend creating a new connection in the “WAN” section. As with the Internet settings, here you need to check the boxes next to Enable VLAN and Enable WAN connection. Fill in the remaining fields as follows:

Mode - Bridge;
Service List - IPTV;
Bridge Type - IP_Bridged.

The “Blinding options” parameter is responsible for the port through which it will work IPTV set-top box, so you need to select a free port (LAN4). It is also important to set priority 4 opposite “802.1p”. The main parameter is the VLAN ID, it is issued by the provider.

In the next step, go to “IGMP Configuration” in the “Network Application” section. All you need to do here is set the Snooping parameter opposite IGMP Work Mode, and enable IGMP (IGMP Enable).

Wi-Fi setup

First you need to open the WLAN tab. Here, the developers of the HUAWEI HG8245h router suggest naming your network (SSID Name) and choosing the encryption type for it. By setting the Authentification Mode parameter to “WPA/WPA2”, a menu with security settings will open. All that remains is to enter the password in the WPA PreSharedKey field. Remember that the boxes next to the WMM Enable, Broadcast SSID and Enable SSID fields must be checked.

The optical modem ont huawei hg8245 is a completely worthy representative of the glorious ancient Chinese family of Huawei. But seriously, the device will become a good decision both for home use and for creating a reliable corporate network. In skillful hands, its capabilities are very extensive and multifaceted.

And in this article we will look at how to set up a Huawei hg8245 wifi router under Rostelecom, as well as what functions this optical terminal supports.

By the way, the peculiarity of this modem is its two-level administration system: for major changes you will need a superuser password (which is blocked by Rostelecom for all modern firmware). Of course, with the help of " brainstorming“It can be dug out from the router’s configuration file, but in most cases “the game is not worth the candle” and for simple home use standard publicly available settings are quite sufficient.

Huawei HG8245: technical specifications

The Huawei hg8245 router is designed for connecting to a local network for the Internet, television and telephony using GPON technology.

At the same time, the device supports data exchange at GE line speed with a bridge connection, and 900 Mbit/s in a NAT scenario.

From the main features terminal ont hg8245 worth noting:

- processing of Internet signals, IPTV and VoIP (arriving via an optical channel);
- creation of wireless WiFi points access;
- support virtual server, NAT, DMZ and DDNS functions
- remote diagnostics of problems;
- Ethernet connection monitoring, etc.

Ont hg8245 terminal: description of connectors

On the back panel of the Huawei hg8245 router there are:

Optical port OPTICAL, designed for connecting fiber optics

Do not look into the optical port to avoid eye injury.

LAN1 – LAN4 - connectors for connection user devices via network cable;

TEL1 – TEL2 – connectors for connecting telephone cable (VoIP telephony);

ON/OFF – button to turn the device on/off;

POWER – connector for connecting a power adapter.

On the sidebar Huawei modem hg8245 are located:

BBU - connector for connecting an external battery;

USB port for connecting external media;

WLAN button to turn on/off the Wi-Fi function;

The RESET button is necessary to reset the router settings to factory settings.

To reset settings, hold down this button pressed for 10 - 15 seconds.

On top panel ont huawei hg8245 the indicator block is located:

The POWER indicator indicates the presence of power supply ( green– power supply from the mains, orange – from an external battery);

The PON and LOS indicator characterize the optical cable connection. So, if the Huawei hg8245 los LED blinks red, then the device receives low level optical signal.

The LAN1 – LAN4 indicators light up when the corresponding port on the back of the device is activated (with a normal Ethernet connection, the LED lights up steadily).

The TEL1 – TEL2 indicators indicate the activation of the VoIP telephony ports;

USB characterizes the connection to the optical terminal of external devices;

The WLAN indicator lights up when the WiFi function is activated;

The indicator lights up steadily when the WPS function is enabled.

Further instructions provides initial setup of Huawei HG8245. If the optical terminal has been in use before, you must first reset its settings to factory settings using the RESET button.

Setting up a Huawei hg8245 router by Rostelecom

To set up a Huawei hg8245 wifi router under Rostelecom, you first need to connect it to your computer using network cable(supplied with the device).

Then on this PC you need to go to and set the static IP address 192.168.100.2 there, and leave the subnet mask 255.255.255.0

Important! Static IP is set only temporarily initial setup router. Upon completion Huawei settings hg8245 Rostelecom should set a dynamic IP address in accordance with the instructions at the above link.

Huawei hg8245: login and password

To log into the Huawei hg8245 Rostelecom router, you need to launch any Internet browser on your PC, enter 192.168.100.1 in the address bar and press the “Enter” (or “Go”) key.

An authentication window will open where hg8245 will ask you to enter your login and password.

Default for Huawei router MGTS hg8245 login and password: “root” and “admin”,

however, on many firmware versions Rostelecom installs login(account) : telecomadmin And password: admintelecom.

Enter the required authentication parameters and click the “Login” button

How to set up wifi router huawei hg8245?

If this is not the case, check the missing boxes and click the Apply button to save the settings.

The next step is to create a new connection. To do this, go to the WAN menu tab and click the New button.

If any connections have already been established in this section, they should be deleted to avoid system failures.

In the new connection settings window, set the following parameters:

Mark the “Enable WAN” marker;

In the WAN Mode line, select Route WAN from the list;

In the Service type line, set Internet;

Check Enable Vlan;

In the VlAN ID line, enter the VLAN ID. (VLAN ID must be the same as the VLAN ID on the OLT). It ranges from 1 to 4094. This parameter must be specified in your contract with the provider (otherwise you can check with the service technical support Internet provider);

In the Encapsulation mode line, select the type of Internet connection provided to you (this parameter is also specified in the agreement with the provider);

In the IP acquisition Mode line, the provided method for obtaining an IP address is:

DHCP – dynamic address;

Static – static (permanent) IP address. When choosing this mode you will also need to enter the IP address allocated to you, subnet mask, active and backup IP addresses DNS server and the default gateway (from the agreement with the provider).

In PPPoE mode, you must enter a username and password (from the agreement with the provider).

Check the Enable NAT checkbox and click the Apply button to save the connection you created.

After saving the settings, a configuration page will appear with a new Internet connection.

Router hg8245: bridge mode

To configure the hg8245 router in bridge mode, when creating a new connection, select bridge mode in the Mode column, and IP Bridget in the Bridge type line.

How to set up iptv on a Huawei hg8245 mgts router?

To set up IP TV on the Huawei hg8245 gpon router, you need to create a new connection in the WAN tab, where in the Service type line select IPTV and enter the VLAN ID and Multicast VLAN ID from the agreement with the service provider.

Click Apply - a second connection for IPTV should appear on the configuration page.

Now you should check if the IGMP feature is enabled. To do this, go to the Network Application -> IGMP Configuration tab and check that Enable IGMP is active.

On this basic setup Router Huawei HG8245 Rostelecom is finished. The activity of the created connections can be checked in the Status tab - the connection status should be Connected, and an IP address for each device should be assigned in the IP Address column.

Huawei echolife hg8245: wifi setup

To configure wifi on the Huawei hg8245 Rostelecom router, go to the WLAN -> WLAN Configuration tab and set the following parameters here.

SSID Name – the name of your WiFi Network, which is displayed in the “Search” available networks» wireless devices;

Associated Device Number – maximum quantity devices that can connect to your network;

Authentication Mode – authentication mode. For greater security, it is recommended to use WPA2 Pre-Shared Key;

Encryption Mode – encryption type. For greater security, it is recommended to install AES;

WPA Pre-Shared Key – password for your wireless network from 8 to 63 characters. Here you can change wifi password huawei hg8245.

Channel Width: width WiFi channel. If you only use 802.11n devices, then set it to 40MHz. If you are using 802.11b or 802.11g devices, then it is recommended to set it to 20 MHz. If they are used different devices– set Auto 20/40.

For use installed configuration click the Apply button and scan your WiFi networks on any wireless device. If you find a network with the name you specified in the SSID line, then connect to it and enter the password (WPA Pre-Shared Key).

Don't forget when you finish wifi settings For the Huawei HG8245 Rostelecom router, specify dynamically obtaining an IP address in the network card settings.