How to enter Windows 10 safe mode. Disabling restart in case of system failure

Facebook

If problems arise with Windows computer, one of the first troubleshooting steps is to download and run in safe mode Windows. Safe Mode is a simple, stripped-down version of the operating system that loads only the most important files and drivers. In safe mode, you can fix a number of errors with drivers and cure your computer of viruses that prevent the system from starting up stably. If earlier you could enter the familiar Windows 7 using the F8 button when you start the computer, then Windows 10, 8 no longer have this function, but there is a trick that will help you return the F8 button to enter safe mode when you turn on your computer with Windows 10 In this guide, we'll look at how to enter and launch Safe Mode in Windows 10 from the desktop and return the familiar F8 button to always enter through it, and we'll look at how to disable Safe Mode to avoid cyclic booting.

Note: The easy ways are at the bottom, provided you can boot into your desktop.

How to start Safe Mode when booting Windows 10

If Windows 10 won't boot until home screen and you need to go into or start safe mode when turning on Windows 10 through the “BIOS”, as for example before in Windows 7, with the F8 key, then you will need to get into the Windows 10 recovery environment using other methods, which are described below. It can be created on another working computer or while yours was still working.

Note: If you can boot to your desktop, then launch Command Prompt as an administrator and proceed to step 3.

Step 1. When you started with installation flash drive, then get to the point installations and click on the link below " System Restore".

Step 2. You will be transferred to Extra options windows 10. Next, go to the settings Troubleshooting > Advanced Settings >Command line.

Step 3. Enter the following code into the command line (you can copy it in its entirety, you can enter each command via Enter):

bcdedit /set (default) bootmenupolicy legacy

exit

Step 4 . You can now start in safe mode using the key F8 on Windows 10, press the button F8 continuously during system boot until the menu appears with download methods. If you want to go back to how it was, then enter instead of legacy > standard. There will be the following type of command bcdedit /set (default) bootmenupolicy standard .

Press the restart button on the computer itself many times in a row to trigger an error and bring up the process diagnostic menu.
Turn on the computer, wait until it boots as much as possible before the error occurs. Next, press and hold the power button on your computer to complete shutdown. Repeat the procedure 3 times, by the 4th time you should see a recovery menu.
If all else fails, then follow Step 1.

How to add Safe Mode to the OS boot selection menu

Windows 10 now has additional startup options. This will look the same as if you have multiple versions of the OS installed on your computer. If you often use safe mode, then setting up the menu when choosing an OS will be very excellent and convenient. In the picture below I have configured some settings for myself. Let's look at this method.

Note: Before performing this method, read it from the beginning to the end and you will understand the meaning.

Step 1. There will be three commands for the three menus created. Maybe you don’t need three, but only need one menu with safe mode. Launch Command Prompt as Administrator and enter following commands to choose from.

bcdedit /copy (current) /d "Safe Mode"- Let's create a safe mode boot.
bcdedit /copy (current) /d "PSU with network"- Let's create a safe mode boot with a network (Internet access).
bcdedit /copy (current) /d "BP CMD"- Let's create a safe mode boot with the command line.

Step 3. The system configuration will open, go to the "" tab. We will see the list that was specified via the command line above. Let's customize each menu.

1) . Select "safe mode" from the list at the top and click on the checkmark at the bottom and select " Minimum". Next, check the "" box and click apply. You can also set a menu timer, for example, after 10 seconds it will automatically load just Windows 10. This way the boot menu will appear in safe mode.

2) . Select "PSU with network" from the list and select "Network" from the bottom and check the " Make these boot options permanent". Click apply and this way we can load safe mode with the network, i.e. with the ability to access the Internet.

3) . Highlight "BP CMD", below select " Another shell"and check the box" Make these boot options permanent." Click Apply and OK.

How to enter Safe Mode in Windows 10

Step 2. You will find yourself on Wednesday windows recovery 10. In this environment, you can reset settings, restore system and much more. In the recovery environment, click on Troubleshooting.

Click the button Reboot.

Click on your keyboard F4 to begin the startup procedure windows systems 10 in safe mode.

How to enter safe mode in Windows 7

Method 1. Windows 7 starts when you press a button F8. Once you have turned on or restarted your computer, press the F8 button at 1 second intervals. The method will work and to Windows XP. After calling up the menu additional settings, select a download option.

The developers of Windows 10 have provided for system recovery processes to take place in automatic mode, but they still retained the ability to enter safe mode. However, familiar to more earlier versions OS Windows method Login using the “F8” key no longer works in Windows 10.

How to activate a familiar function? What keys and buttons should I press when loading the OS to start in safe mode? Below is detailed description in various ways For Windows boot 10 in safe mode.

Enable Windows 10 to boot in safe mode via msconfig.

To do this you need:

Press the key combination “WIN” + “R”;
IN text area enter the command - “msconfig”;
Confirm by clicking “OK”;
Then in the menu that appears, open the “Download” tab;
Select with a single click of the left mouse button operating system and check the “Safe Mode” box;
Also in this window, the user can select OS boot modes; it is recommended to leave the “Minimal” checkbox by default;
Click “Ok”;
Ready. After restarting, Windows 10 should boot into Safe Mode.

Note: To start Windows in normal mode, you need to uncheck the “Safe Mode” box using the same instructions.

This may seem strange to experienced users, but it is very important not to confuse Safe Mode with and be aware of the differences.

Logging into Windows 10 in Safe Mode - Settings.

To restart Windows and open it in safe mode, you need to change the startup options. To do this you need:

Go to the Start menu;
Click “Options”;
Next, in the window that appears, go to the “Update and Security” tab;
Then in the menu that appears, open the “Recovery” tab;
Click the “Restart Now” button;
After that, click “Diagnostics”;
Click “Advanced options”;
Next, enter the “Download Options” menu;
Click “Reboot”;
Wait for the menu to appear on the monitor additional options start the computer and highlight the appropriate boot method, click on “Enter”;

Logging in safe mode allows you to solve many problems, such as when or you need to change tables, etc.

Reboot+Shift starts Windows 10 in safe mode.

The algorithm of actions consists of several sequential stages:

Enter the “Shutdown” window through the “Start” button;
Next, hold down “Shift” and click “Reboot”;
Then using previous instructions restart the PC.

But all these methods work when you can log into Windows 10 and it starts up successfully. What should you do if problems, such as others, occur when logging in? Let's look below.

Login to Safe Mode if Windows 10 won't start at all.

If all the above methods did not help, then you need to use a removable installation media system, boot disk or USB flash drive.

Algorithm of actions in this situation:

Boot from a disk or flash drive by changing the startup settings in the BIOS;
After downloading, select the “System Restore” section;
Next, go to the “Diagnostics” section;
Enter the “Additional parameters” subsection;
Click “Command Line”;
In the console that appears, type bcdedit /set (globalsettings) advancedoptions true
Press the “Enter” and “Continue” keys;
Wait for the additional startup options menu to appear on the monitor and select safe mode;

To restore the standard launch option, you will need to call context menu“Start” - “Command Prompt” and enter the command:

Bcdedit /deletevalue (globalsettings)advancedoptions

When you restart, Windows 10 will work normally.

Here are some simple ways to start Windows 10 in safe mode. If you have anything to add, leave comments below.

Windows 10 inherits all the boot system features of Windows 8, providing the same graphical environment for performing system recovery tasks. It is expected that system recovery operations after failures will be primarily performed by the system automatic recovery. If Windows 10 does not boot correctly, an automatic recovery system starts, which, without user intervention, tries to find and fix problems that are interfering with normal loading systems. However, this does not mean that Windows 10 does not have Safe mode, it just means that this boot mode is hidden from users by default.

In some cases, it is necessary to start the system in safe mode, for example to debug a driver or application. Let's see how to enable safe mode in Windows 10.

Windows 10 can be booted into Safe Mode in several different ways.

MSConfig Utility (System Configuration)

The easiest way to boot Windows 10 in Safe Mode, just like the previous ones Windows versions, use the utility msconfig.exe. For this:

Advice. You can also disable booting in safe mode using msconfig by unchecking the Safe boot option.

Shift + Restart combination

IN start menu click Power button and, holding Shift on your keyboard, select reboot system ( Restart)

Note. The same Shift+Reboot combination can be used on the login screen.

In the dialog that appears, select the items sequentially Troubleshoot(Diagnostics) -> Advanced options(Advanced options)-> Startup Settings(Boot Options).

Reboot the computer by pressing the button Restart.

After rebooting, a window will appear with available options system boot (9 options, including three types of safe mode). To boot into safe mode, press F4 or 4 (or F5/F6 to boot into safe mode with networking or command line support, respectively).

Launching diagnostic mode from the new Control Panel interface

To launch a new modern Panel Windows management 10, press the button Start and select menu Settings. Then go to the section Update &security.

Go to section Recovery and in the section Advanced Startup click Restart now.

Starting safe mode from the command line

It is also possible to configure Windows startup 10 in safe mode and from the command line. To do this, open a command prompt (cmd) with administrator rights and run the command:

Then restart your computer with the command:

Windows 10 will now always boot in Safe Mode. To return normal mode downloads:

bcdedit /deletevalue (default) safeboot

Bringing back the old text boot menu

In Windows 10/8 it is possible to return to the old text Windows boot loader supporting key F8(Shift+F8) and the ability to select system startup options.

Note. The system boot speed with such a bootloader will be lower.

To return the test bootloader, run: command line with administrator rights:

bcdedit /set (default) bootmenupolicy legacy

Now when you boot your computer after the self-test (POST) stage, you need to press the key several times F8. The good old text menu with system boot options should appear.

To disable the bootloader text mode and return to fast loading, do:
bcdedit /set (default) bootmenupolicy standard

Launching Safe Mode from Recovery Mode

Few people know that to enable safe mode and other recovery options in Windows 10, it is enough 3 times in a row interrupt the system boot with the power off button.

The system recovery environment will start 4 times ( Recovery mode ), from which you can choose to boot into safe mode or other system boot options.

Select an item See advanced repair options and follow the instructions from the second paragraph of our article.

It is no secret that failure situations often arise, when in order to restore system functionality or carry out some diagnostic measures, it may be necessary to use the so-called safe mode ( Safe Mode). Let's see how to enable it on Windows 10 on a laptop or computer. It’s worth immediately taking into account that the technique described below is radically different from everything that was in old systems.

How to enable on Windows 10: basic methods

As it turned out, the new “top ten” introduced quite a lot of innovations that, to put it mildly, many users did not like. It was also possible to interfere with the operation of the system bootloader in safe mode. The fact is that the classic old-fashioned method of pressing the F8 key at startup does not work here. It is unclear why they abandoned it. However, the question of how to enable Safe Mode on Windows 10 has several interesting solutions, compared to older methods.

IN in this case we're talking about about using system configuration settings, keyboard shortcuts and commands, system recovery, and even changing related settings in the updated Control Panel. But first things first.

How to enable safe mode on Windows 10 at boot: MSConfig utility

First, let's look at universal method using the settings called up from the “Run” menu with the msconfig command.

In the settings window that opens, go to the download tab. The download options will be shown below. Here you just need to check the box next to the line indicating safe mode, then save the changes and reboot the system.

You should immediately note that this method is good for solving the problem of how to enable safe mode (on Windows 10) when turning on a computer or laptop. There is some inconvenience here due to the fact that every time you start the system will always boot in safe mode. If it is not needed, you will have to disable it in the same way.

Using specific keyboard shortcuts and commands

Another interesting solution to the problem is how to enable safe mode on Windows 10, which involves rebooting while holding down the Shift key. The only thing worth considering here is that this technique is also suitable if you select safe mode in the login window.

To begin, select the shutdown section from the Start menu, but stop at the reboot line. Clamping Shift key, click on the reboot command, after which in the new dialog box we go to Troubleshoot and select first Advanced Options, then Boot Settings. And finally, click on the Restart button.

After restarting, a window will appear on the screen indicating 9 options for booting the system, including safe mode.

Enabling Safe Mode from Control Panel

Now let's see how to enable Safe Mode on Windows 10 using the Control Panel.

Here you should go to the settings section and then go to the update and security menu. Here we use the advanced launch options and press the restart button. Further actions are completely similar to the previous option.

Managing Safe Mode from the Command Line

One more in a great way A way to solve the problem of how to enable safe mode (on Windows 10) is to use the command line, called through the “Run” menu by entering the cmd combination. In the window that appears, enter the following combination:

After successful completion of the operation, you need to reboot the system (preferably from here):

Again, it will be installed on permanent basis. You can return the bootloader to its original state in the same way as in version 8:

By the way, if the user has problems loading the system as such, you can use this combination:

It is also relevant for starting safe mode during system recovery.

Starting from recovery mode

In this mode you will need boot disk or flash drive. We boot from removable media, go through the stage of selecting language and regional standards, and in the window with the installation offer at the bottom in the left corner, select recovery.

Now go to the diagnostics section, select additional parameters, and then the command line, in which we enter the command indicated above, the very last one. After reporting the successful completion of the process, we return to the original menu and use the continuation line. After this, the computer or laptop will reboot automatically, and the familiar window with nine boot options will appear on the screen.

How to return to normal startup

But that's not all. When considering how to enable Safe Mode (on Windows 10), you cannot ignore returning to the normal boot mode using the F8 key. This is done simply. In a regular command line you need to write:

A painfully familiar classic window will be displayed on the screen with a corresponding menu of boot options. But this solution is mainly intended exclusively for those users who, due to some circumstances or habits, cannot switch to innovations, although, as practice shows, in general, this is not so difficult to do (if there was a desire).

Bottom line

As you can see, although the “ten” has a large number of innovations, there are many more options for enabling safe mode. Well, which one to choose depends on each specific case when you need to perform a certain action.

If we approach these issues, so to speak, from a practical point of view, the most likely solution is a one-time launch of such a mode, for example, when restoring with booting from removable media. And it’s true, well, you won’t use it all the time, because it takes more time when the system starts. In general, the use of Safe Start is recommended only in cases where problems or failures are observed.

Please note that when choosing the option to boot from a recovery disk or flash drive re-installation Windows is not required (you can simply skip it). As for the other methods, you can use them or leave them. However, information about available methods there won't be any extra. However, as they say, you can get used to everything.