How to block “unwanted” channels on the Tricolor TV receiver. Why block channels? What to do if there is no signal on the Tricolor TV receiver

All tips

Answers to subscribers' questions about the operation of Tricolor TV receivers with detailed step-by-step instructions.

How to find the nearest Tricolor service center and have the receiver repaired

First, you need to contact the installer company and find out if they have a certified service center; if not, go to the manufacturer’s website GS.RU (go to the “Support” tab and click on the “Service Centers” link) and find the service center closest to you .

At the SC itself you must pass:

receiver (aka receiver);
warranty card if you have a previous generation receiver up to version B520. All new generation receivers use a “built-in” smart card and electronic warranty;
power unit. There are times when the receiver does not work precisely because of a bad power supply;
There is no need to bring a remote control (also known as a remote control) (unless the problem is related to the remote control itself).

In the near future, the technicians will study the problem of the receiver and find the most optimal solution, unless, of course, the client himself did not help the receiver (filled it with liquid) or decided to study the internal structure of the receiver (violated the guaranteed integrity of the seal), etc.

How to check your balance using Tricolor ID?

In order to check the balance, find out the expiration date of the subscription or the fact of payment for Tricolor TV, you need to go to the official website and, going to the “subscribers” section, enter your receiving equipment id in the appropriate field.

How to remove error 0 on the Tricolor TV receiver?

In most cases, error 0 on Tricolor receivers occurs in a situation where there is a failure in access to the broadcast. To eliminate the error, you should first check the version with receiver overload. If this option does not help, then the solution to the problem is to reset the set-top box settings to factory settings.

How to remove error 4 on the Tricolor TV receiver?

The error with this number reads: “No access to view. The TV and radio channel is not broadcast by the operator.” This notification appears when the receiver, configured to receive and broadcast Tricolor TV channels, malfunctions and begins to pick up “not its own” channels. Most often, error 4 occurs after updating the receiver or after searching for new channels. The video explains how to fix this error yourself.

How to remove error 5 on the Tricolor TV receiver?

This error appears more often on “old” generation receivers, since they use a smart card that can be removed from the device without disassembling it. Most often, this problem is caused by multiple internal errors (improper operation of the equipment; multiple presses on the remote control when the receiver “freezes” for a short time; loss of signal from the satellite, etc.). The video shows methods for eliminating error 5.

How to remove error 6 on the Tricolor TV receiver?

The error with this code reads: “No access to view.” In order to eliminate this problem, it is necessary to find out what caused it. This video explains why error 6 occurs and provides methods for eliminating it.

How to remove error 8 on the Tricolor TV receiver?

This problem often occurs with “legacy generation” equipment that uses removable smart cards. To get rid of error 8, make sure that the smart card is installed correctly, as some hardware models install it differently. It's also worth checking out the version with receiver overload. If this option does not help, then the solution to the problem is to reset the set-top box settings to factory settings.

How to remove error 9 on the Tricolor TV receiver?

Error 9 reads: “No access to view. Make sure registration is complete." Most often, this means that the user did not enter data about subscriptions into the receiver or the server simply did not have time to update the current information.

How to remove error 10 on the Tricolor TV receiver?

Error 10 means that to continue viewing you need to pay for Tricolor services. If this error occurs, check whether you have enough funds in your account and whether you have selected a specific package for payment.

How to remove error 11 on the Tricolor TV receiver?

Error 11 occurs when there is no money in the personal account of a Tricolor subscriber. This actually happens even after you have paid the bill, but you should not panic ahead of time - some payment systems, terminals or various applications have the ability to delay the transfer by an hour, or maybe even a day.

What to do if there is no signal on the Tricolor TV receiver?

The appearance of the message “No signal” indicates a malfunction of the equipment. Having found out the cause of the failure, the user can make attempts to eliminate them. Possible causes of the failure and ways to eliminate them are discussed in the video.

What to do if the Tricolor TV receiver starts to turn off spontaneously?

In new generation receivers (starting from the B520 model), a new “automatic shutdown” function has appeared in the software, which commands the receiver to go into standby mode. If the user does not give the receiver a new command within 100 seconds, it will automatically turn off. This function can be enabled/disabled in the settings of your set-top box.

How to connect thematic packages of TV channels from Tricolor TV?

You can connect additional packages by paying for this service using a payment terminal, with a bank card online or in communication shops. After payment, the channels will become available within 8 hours. Please note that when paying, you must not only transfer money to your personal account, but also be sure to select and activate the package you need. This can be done immediately when replenishing your account or through the Personal Account of a Tricolor subscriber.

Watching Tricolor television via the Internet

Have you ever encountered a situation where you want to connect satellite TV, but for various reasons this is impossible?

There is a solution - the satellite operator Tricolor pleases its subscribers with the opportunity to watch television via the Internet. No more dishes, drillings, antenna cables that stretch into the apartment like vines and spoil your interior. And most importantly, subscribers are not afraid of any weather conditions - rain and snow will no longer interfere with enjoying their favorite TV shows.

The Tricolor receiver gives “error 10”, what should I do? Receiver GS 8300

This error informs the user about the need to top up his personal account balance in order to decode the main TV channel packages.

How to reset the Tricolor receiver to factory settings? Receiver GS 8306

In the main menu of the receiver, you need to go to the settings section, select the “factory settings” item and, by entering the PIN code “0000”, confirm your choice. After rebooting the receiver, in the menu that appears, using the volume buttons, you must select “Tricolor TV” as the operator, specify the main region and confirm your action using the “OK” button on the receiver’s remote control, and after completing the automatic channel search, save the list.

A message appears on the screen: “No signal”, what should I do? Receivers GS 8307/GS 8308

A message appears on the screen: “DRE Coded Channel”, what should I do? Receiver GS 8306/GS 8305

If the package of TV channels has been paid for, you need to make sure that the smart access card is installed correctly, as demonstrated in the video.

A message appears on the screen: “No signal”, what should I do? Receivers GS 8305/GS 8306

In most cases, this message indicates a mismatch between the method of connecting the receiver (via “scart” or “hdmi”) and the broadcast mode selected in the settings (analog or digital). To change the broadcast mode, you must press the “input” button. signal" on the receiver's remote control and wait until it reboots.

How to update the firmware on the Tricolor TV receiver? Receiver GS 6301

In the “Software Update” section you will find comprehensive step-by-step instructions with the official firmware file.

How to find out the Tricolor receiver id? Receiver GS 8306

In order to find out the ID of the Tricolor receiver, you need to press the corresponding “ID number” button on the remote control, or perform the following chain of actions from the main menu of the receiver: “DRE Info - Smart card”.

How to organize the list of channels on Tricolor TV? Receiver GS 8306

In order to organize Tricolor TV channels, you need to perform the following chain of actions from the main menu of the receiver: “Channels - Arrange Favorites”. We add the channels we are interested in to the selected list using the “F2” button, marked in green on the remote control, and exit the menu. Changing the name of the list of favorite channels is done using the “F4” button. To load a list of favorite channels, press the “F4” button on the remote control and select the appropriate one using the “OK” button.

A number of models of satellite tuners have this function, all of these models do not belong to the recommended Tricolor TV tuners, and the recommended equipment does not have such functions.

The access card is recognized, then you need to contact the support service of your satellite operator to reactivate the card; you can find out the phone numbers on promotional channels (they are always publicly available), as well as on the access card.

The subscriber must choose the television he wants to watch.
In general terms, for a person who is just discovering satellite television, a number of parameters can be identified that will facilitate the choice of a satellite operator:
1. Price of a set of equipment
2. Subscription fee
3. Channel list
4. Additional functions (recording, video on demand, high definition television)
The special contains all the characteristics of satellite television operators

Procedure for resetting the PIN code for various models of GS receivers Work procedure 1.1 For models DRE-4000, DRE-4500, DRE-5000, DRE-5500, DRE-7300, DRS-4500, DRS-5001, DRS-5003, GS- 7300, you should perform the following procedure: 1) Install the software (hereinafter referred to as the software) version 2.0.91; 2) in the “Status” menu, sequentially dial the key combination on the remote control (hereinafter referred to as the remote control): white button (clock), 9, yellow button, 4, red button, 8, 7, 3, 5, green button; 3) confirm the PIN code change; 4) check the ability to access the “Settings” menu using the PIN code “0000”. 1.2 For models DRS-8300, GS-8300 (M/N), GS-8302 (S), you should perform the following procedure: 1) in the “Status” menu, sequentially dial the key combination on the remote control: white button (clock), button "9", yellow button, "4", red button, "8", "7", "3", "5", green button. 2) confirm the PIN code change; 3) check the ability to access the “Settings” menu using the PIN code “0000”. 1.3 For the GS-8304 model, the following sequence of actions allows you to reset the PIN code to “0000”: 1) turn off the receiver’s power; 2) press and hold down the “P+” and “P-” buttons (program switching buttons) on the front panel of the receiver; 3) turn on the receiver power; 4) check the ability to access the “Settings” menu using the PIN code “1111”. 1.4 For the GS-8304 model, the following sequence of actions allows you to reset the PIN code to the value “1111”: 1) in the main menu, sequentially dial the key combination on the remote control: red button, yellow button (2 times), red button; 2) confirm the PIN code change; 3) check the ability to access the “Settings” menu using the PIN code “1111”. 1.5 For models GS-8305 (B,S), GS-8306 (B,S) the PIN code “1538” always works.

Regarding the problem of encoded channels on the “client” receiver, it is recommended:
1. Check the software version and update to the latest one if the version is wrong
2. Perform a factory reset
3. Re-search channels
4. Repeat commands from the LCD interface

For subscribers who followed these steps, the problem was resolved.

Most often, the reason for raising the issue of partial blocking of satellite television is a situation where children, succumbing to curiosity, switch television channels one after another in search of something interesting. However, interesting things are not always useful, desirable and acceptable, and in some cases they are completely prohibited for viewing by young viewers, which, for example, applies to channels with age restrictions. It is in such cases that parents rush to block channels from their children and make sure that such content is not available to young TV viewers.

Blocking channels on Tricolor TV

Tricolor TV is the largest digital satellite television operator in Russia, broadcasting over most of the territory of the federation. Tricolor TV packages include up to 223 TV channels, among which, in addition to state and children's channels, there is a set of night channels. That is why blocking a channel on Tricolor TV in the name of children’s safety is not only the right, but also a necessary decision that is very easy to implement. In order to block Tricolor TV through your personal account, you must perform the following sequence of actions:

Click on the “Menu” button on the remote control that controls the receiver.
In the submenu that appears, by manipulating the navigation buttons (arrows responsible for moving up, down, right and left), select the “Organization of channels” item.
Find the desired channel using the navigation buttons, highlight it with the cursor and click the “OK” button. The channel you selected will be marked with a check mark.
If there is a need to block several channels, repeat the sequence of actions in the previous paragraph in relation to each of them.
Click the F3 button (on the remote control that controls the receiver, this button is yellow). Immediately after this, you will be asked to enter your PIN code.
Use the number buttons to enter a valid PIN code. If you do not know it, then most likely you have a default PIN code set to 0000. If you have forgotten your PIN code, you should contact the service center.
In order to change the PIN code, you need to go to the main menu, select the “Blocking” item, enter the current PIN code in the “Old PIN” column, enter a new PIN code in the “New PIN” column, confirm the operation by clicking on the “ PIN confirmation."
After all the above actions, a lock icon will appear next to the TV channel number, which indicates that the channel is blocked. To view these types of channels, you must enter a PIN code.
To unlock a channel, you must select the desired channel, click on the F3 button and enter a valid PIN code.

The whole set of steps will take you no more than a few minutes, and in return you will receive peace of mind in the family and confidence that there will be no harmful effects on your child.

Children are the flowers of our lives, with a very sensitive perception of the world, and of course we are responsible for their upbringing, and for the information that comes to them from TV screens. Therefore, it is very important to protect them from watching inappropriate channels, especially if adults are not around.

Let's look at how to block some channels using the GS-8308 receiver as an example. This model has two ways to restrict viewing.

The first method is selective blocking of channels.

The second is blocking channels based on age restrictions.

For any blocking, you must activate the security PIN code. Go to menu -> settings -> blocking.
Select activate PIN. We come up with your PIN and indicate it twice. The PIN code has now been created. It's important not to forget him. It is best to write it down on a piece of paper and hide it in a safe place.

Selective channel blocking

To selectively block channels, click Menu -> Applications -> Channel Editor.

Select the group “TV” or “Radio”. A green “block” button appears at the bottom. Now we move through the list of channels and press on the remote control the green button opposite the “undesired” channel.

Now if you turn on the “adult” channel, it will require you to enter a PIN code before viewing. The disadvantage of this method is the time-consuming procedure for blocking channels when there are a large number of them, as well as difficulties in viewing these channels in the absence of children (you must enter a PIN code each time). The second method eliminates all these shortcomings.

Blocking channels based on age restrictions.

To select this mode, go to menu -> blocking and select the age group 3 years, 6 years, etc.
To select an age group, you must enter a PIN code. Now all channels not included in this group will be blocked. To remove the restrictions, go into the lock again and after entering the PIN code, erase the “no age restrictions” option. After that we enjoy watching.

I think that everyone already knows that Tricolor TV is a place for freebies... a free opportunity to watch almost all channels.

And so... the topic is relevant and therefore I have collected all the possibilities about this topic. Let's start with a plugin that solves many issues...

First option…

Actions…

WE INSTALL AS A REGULAR PLUGIN VIA A FLASH DRIVE. Before installation, you need to stop all plugins.
Post the attached file keydata to the keys folder and run the plugin.
AND ENJOY WATCHING THE TRICOLOR PACKAGE (HD CHANNELS DO NOT WORK)

plugin.rar….take:

keydata.rar….take:

Path for keys \plugin\var\tuxbox\config
e36.bin or e56.bin

However... Tricolor TV now works on Oscam and Vicard, but you need to change the keys for them every day...

Second option...

Tricolor and without an access card? Does this happen?

Yes, sometimes …
First you need to install the emulator oscam(if it has not been installed previously). To emulate the DRE (Tricolor) encoding, a special version of the oscam emulator has been developed.

Here is the Oscam assembly, It updates the keys itself.
plugin.zip…. we take away:
Install from a flash drive. After the reboot, install DRE, then run AU off AU again, and only then oscamdre on.... the keys are fresh.

Specifically about this topic...

Third option

Gold Wafer cards...(very suitable for Dreambox)

The card contains a peak controller chip, for example PIC16F84, and an EEPROM memory chip, for example 24C16.
In fact, these are absolutely identical cards.

Firmware for this card has appeared in the public, which emulates the official tricolor card of the 13th series.

It opens in the same way as the oscam_dre emulator, but the card has AU (auto-update), i.e. no need to update the ee.bin key file every week.

In addition, the card can be used in those tuners that do not have an emulator.

Already specifically...

Yes! The eternal question remains... how long will Tricolor TV be free?

Users of the system can buy Tricolor TV PIN codes at special prices, or instantly and without commission pay for any Tricolor TV services using the number of the receiving equipment or subscriber agreement. Choose a method convenient for you.

Single year package (all regions)

Package Single year 3 pin codes (all regions)

Package Single year 10 pin codes (all regions)

Package Single Multi year (all regions)

Package Single Multi year 3 pin codes (all regions)

Package Single Multi year 10 pin codes (all regions)

Night package (all regions)

Night 3 pin code package (all regions)

Children's package (all regions)

Children's package 3 pin codes (all regions)

Ultra HD package year (except for Tricolor TV-Siberia)

Package Unified Multi Light year (all regions)

Package Single Multi Light year 3 pin codes (all regions)

Package Unified Multi Light year 10 pin codes (all regions)

Multiroom service (all regions)

Package MATCH Football month (except Tricolor TV-Sibir)

Our Football Month (all regions)

The pin code is an alternative to scratch payment cards and has a limited activation period. Pay attention to the activation period of the PIN code at the time of purchase (see activation period).

Payment instructions:

How to buy Tricolor TV pin codes for Yandex.Money

You can buy Tricolor TV pin codes using the system. This is not at all difficult to do: payments with Yandex.Money are instant, and you will not be charged any commission for them.

If you don't yet have an account with Yandex.Money, you need to open one: it only takes a few minutes.

How to open an account?

First, you need to register on Yandex (if you already have Yandex.Mail, but do not have an account with Yandex.Money, feel free to skip to step 2).
When registration is completed, click on the “Start using Yandex.Money” link (or the “Open account” button on the main page of the Yandex.Money website). To create an account, you just need to come up with and write down a payment password: you will need it for any transactions with the account.
Be sure to link your mobile phone to your account. This will help you quickly recover your payment password if you forget it.

So, you have an account in Yandex.Money. To start making payments, you need to top up your account in any way convenient for you.

How to pay for Tricolor TV pin codes with Yandex.Money?

After you select a Tricolor TV pin code or set of pin codes and place your order, you will be redirected to the Payment Method page. Select “Yandex.Money”, click the “Next” button and simply follow the instructions on the screen.

Carefully write down the PIN code you receive (20 digits). After you make sure that all the numbers are written down correctly, go and activate.

Remember that to make any payments you will need to enter a payment password, which you should have created and remembered when opening an account in Yandex.Money.

Please note: according to the legislation of the Russian Federation, users who have not passed the identification procedure can make one-time payments only within the limit of 15,000 rubles. If you plan to top up your account and make large purchases, we recommend that you become an identified user of Yandex.Money. read on the payment system website.

If you encounter problems, contact the Yandex.Money support service, and they will definitely help you.

How to make an online payment via Yandex.Money for Tricolor TV services:

Enter the ID number and click the “Accept” button. ID is the unique number of your receiving equipment. ID always contains 12 or 14 digits - when paying, please indicate the full number.
Select the desired Tricolor TV Service and its payment period (United Package, Children's Package, Night Package or other additional packages)
Enter the payment amount.

When replenishing your personal account, activation of Tricolor TV services is possible in your Personal Account on the Tricolor TV website or by calling 24/7 8 800 500-01-23 (free call).

Tricolor TV is one of the leading companies in the field of digital telecommunications. Numerous customers can enjoy high-quality digital television and a fairly extensive list of thematic packages. However, sometimes it happens that channel encoding unexpectedly occurs, and instead of the usual programs, the TV only shows the words “Encoded channel (DRE)” or “No access”.

What to do in this situation and how to decode Tricolor TV channels yourself

There are several reasons why encoding of a channel or all TV channels at once may occur. Having identified it and eliminated it, you can independently adjust the operation of the receiver without turning to a specialist for help.

Prices in 2019 for Tricolor TV service packages range from 6 to 12 thousand rubles. This is a considerable amount that not every user can afford. Therefore, they increasingly began to use specialized programs to decode channels that hack the receiver, which happens thanks to a virus.

But it is worth remembering that the virus can also negatively affect the entire system, including the TV.

Reasons and their solution

Reasons for channel encoding:

The first reason for encoding occurs is a late payment for Tricolor TV services. A bill not paid on time entails turning off television broadcasting and, as a consequence, channel encoding. After making the payment, this problem should disappear. It is important to remember that when paying, you must specify channel packages. Therefore, it is recommended to monitor your balance very carefully. The most convenient way to do this is in your personal account on the company’s website or through an online service.
When ordering a service that you have not used before, pay attention to whether your tuner can support the desired format. If not, then you will again encounter the coded channel problem. For example, the “Maximum” channel package can only be played with equipment that supports HD.
If there is no connection between the receiver and the satellite for a long time, the problem of inoperative channels may also arise. This may occur due to lack of power. In this case, the receiver will not receive activation keys for paid channels and simply will not be able to connect them. A similar situation may arise if, after payment, the tuner was not connected to the satellite dish. You can solve this problem by turning off the receiver for one minute, then turning it on and finding a free channel to make sure the equipment is working. After the picture appears on the screen, go to one of the paid channels and wait until it connects. In some cases, the period for obtaining activation keys reaches eight hours.
It is not uncommon for your favorite channels to disappear due to unfavorable weather conditions. Unfortunately, it will be possible to improve this situation only by waiting until the elements calm down.
An outdated receiver model can also cause channel encoding.