Setting a password when logging into Windows XP is good, but what to do if you have lost or forgotten your Windows XP password? What should I do? Reinstall Windows?

Forgot your Windows XP password! What to do?

Of course, you can bypass this password if the password is not set to an administrator account. Well, if the password is set to the administrator account, then you will not be able to bypass it, you need to crack it using a special program.

For a novice user, cracking the administrator password of the Windows 7 operating system is a little more difficult than Windows XP. But despite this, in the next article we will definitely analyze the situation with a forgotten Windows 7 password. For now, let’s return to the Windows XP system.

You can bypass the Windows XP password without much difficulty. Let's look at several ways to log into Windows XP.

First way:

Hacking the administrator password using Active Password Changer

If the password is on the Windows XP administrator account, the last two methods of bypassing the password may not help you. You will have to use a little program called Active@ Password Changer.

Active Password Changer can quickly reset passwords installed on Windows XP/Vista/Windows7/8 operating systems. The program is very simple, so you shouldn't have any problems. You simply download this program using another computer and upload it to a flash drive. Place the flash drive on the computer whose password you want to crack, turn on the computer and crack the password. Read more below:

And so we download the Active@ Password Changer program. Size 1.5 MB.

How to use Active password changer?

— Install the Active Password Changer program. We launch it, after which the main program window will open, select our USB drive in the list, and click “Start”:

— The flash drive is ready for hacking, connect it to a computer with a forgotten password.

— Turn on the computer and press the F12 key.

— In the list, select the system boot method, set it and press “Enter”.

— Select the desired account and enter the account number below which has the password and press “Enter”

- And the last action is to press the “Y” key to confirm the hack. You can enter "N" to return to the previous menu. After entering the letter, press "Enter".

— Wait for a message to appear indicating that the password was successfully removed.

- Reboot your computer and you will be able to log in without a password.

Second way:

— After restarting the computer, click on the button F8. After which an additional menu will open with Windows boot options, select from the list "Safe mode";

- After this, a desktop window will open with a message that your Windows is running in safe mode, agree to this by clicking “Yes”.

Your desktop will look something like this;

- Now that you have access to your computer, you can log into your password-protected account and remove the password. To do this, open the Start menu and go to "Control Panel";

Run "User accounts". Next, click on the account icon that is password protected;

— Select from the list of actions "Change Password" and change your password. Or even select a function "Deleting a password" and remove it;

— Restart your computer and log in normally.

Third Method:

— After the password entry window opens, press several times Ctrl + Alt + Delete .

— Another password entry window will open, as shown in the figure below;

Here in the line user, you need to enter the word "Administrator" , and leave the password line unchanged, that is, empty and click “OK”.

- After this, Windows should start, then you need to go to "Control Panel", open "User accounts", Select an account that is password protected.

Enter your new password and confirm it. That's it, you've changed your Windows XP password;

If you do not want to change your password, you can delete it altogether by selecting “Remove password”;

That's all, the password on your computer has been hacked in an easy and simple way. That's all I have

What to do if you forgot your computer password? This guide will tell you what to do if you forgot your Windows password and how to solve this problem without reinstalling the operating system. We'll also look at other possible password issues. The Windows 10 and Windows 7 operating systems have improved security capabilities compared to the earlier Windows XP/2000 systems.

By the way, your PC may have one of the most commonly used passwords installed; for a complete list of popular passwords, see -.

The latest versions of Windows use a more effective password system designed for business use to ensure that no one without the necessary permissions can access information on your computer. This is a double-edged sword. Most users forget some important password at least once. And then the user/owner of the information becomes the “enemy without access rights” for his computer.

Naturally, for every security method there is a way to bypass it, especially if you have physical access to the computer.

In this article, we will look at various methods of protecting your computer with a password and how to bypass them. We won't start with user account passwords, but with equally important passwords, such as BIOS passwords.

How to "bypass" the BIOS password?

BIOS password- one of the oldest methods of protecting a computer from unauthorized access and one of the most common. Why? This is one of the most effective means if the user does not have access to the system unit. Otherwise, it is the same as locking your house with many locks and leaving the window open.

The default BIOS settings on all motherboards do not store password information. So all you need to do to remove the BIOS password is simply reset the current settings, restoring the default configuration. But remember that resetting the current BIOS settings will destroy not only the password, but also all the settings that you set yourself.

There are two ways to reset BIOS settings. Most motherboards have a special jumper for clearing CMOS (the memory in which BIOS settings are stored). Usually this jumper is located near the battery on the motherboard, but to be completely sure, it is advisable to refer to the instructions from the motherboard. On some motherboards, instead of a jumper, there are simply two contacts that need to be closed with a metal object, such as a screwdriver, to reset the CMOS.

If your board has a jumper, then to clear CMOS, turn off the computer, install the jumper so that it closes the jumper contacts, and press the computer power button. Your computer will not boot, but your CMOS settings will be reset. Remove the jumper and turn on the computer again. You will most likely see a screen asking you to press F1 to set the BIOS settings. If you are happy with the default settings, press F1 and select ‘Save and exit’ from the BIOS menu. After this, the computer will boot as usual, except for the BIOS password.

If you don't know where the required jumper is located on your board or if it doesn't exist at all, which is quite possible, you'll have to go a different route. Each motherboard has a battery that powers the CMOS memory, allowing it to store information. As a rule, this is a standard CR2032 battery.

To clear CMOS, turn off the computer and remove the battery (you may need a thin screwdriver). After 5-10 minutes, replace the battery and turn on the computer. The BIOS will be set to default settings and there will be no password. To continue booting, you will need to press the F1 key, and if you are satisfied with the default settings, select the ‘Save and exit’ item in the BIOS menu that appears.

As you can see, all this is very simple on a desktop computer, but with a laptop, the BIOS password can become a serious problem. Due to the frequent theft of laptop computers, manufacturers have made it almost impossible to gain access without passing the password. So, if you have forgotten your laptop's BIOS password, most likely you will have to contact the manufacturer's service center.

What to do if you forgot your Windows password?

If circumstances have developed in such a way that you have forgotten your Windows password, then we recommend that you reset it using the built-in account called Administrator. This is done in safe mode, while booting or rebooting your PC.

To restore access to your computer, you will just need to press F8 and in the menu that has already opened, in which you will be presented with some additional options for loading your operating system, you will have to select the aforementioned “Safe Mode”. Next, you will need to select a built-in account, which, by the way, by default, cannot be protected by any password.

If you did everything correctly, since you strictly followed the above sequence of actions, then while still on the Desktop, you should see a window with a message that Windows is running in the “Safe Mode” you need, which is as simplified as possible. You will need to click “Yes” and go to Control Panel - User Accounts, where there is an icon for the account for which you want to reset the password. On the left, you must select “Change Password” and in the appropriate window enter and then confirm a new password. Ultimately, you will need to restart your PC for the above changes to take effect.

How to crack Windows password on a computer or laptop?

In order to do this, you will have to follow the following sequence of actions:

1. Prepare a CD or flash drive on which a special set of recovery programs intended to restore Windows should be recorded. You will need to insert it into the drive or into the appropriate port during the subsequent reboot of the computer. You can prepare this package of resuscitation programs yourself by downloading programs intended for separating, saving and restoring data, or you can download some ready-made RBCD 10.0, for example;
2. When starting the PC, in order to enter the BIOS, press the “DELETE” button. There we will need to change the installation priority and assign the computer to boot from the CD-ROM. After this we visit our boot disk in the drive and restart the PC;
3. Having entered the recovery disk, which should appear after the package of resuscitation programs has been downloaded, we must select the edited copy of Windows and go to the “System Restore” mode - the section that will be located at the very bottom of the page;
4. We look for the command line and enter “regedit” there (we look for it in the dialog settings of the same window). We find and then select the HKEY_LOCAL_MACHINE section, in which we need to select File, and then Load hive;
5. Open the “SAM” file and select the section - HKEY_LOCAL_MACHINE\hive_name\SAM\Domains\Account\Users\000001F4. Double-click on the F key located there and go to the very first value located in the line, which we will need to replace with the number 10;
6. In the same section, select “File”, and then “Load Hive”. Click “Yes” to confirm unloading the bush. We close the registry editor, thus completing the installation process, take out the flash drive or disk and reboot the computer.

How to find out your computer password?

The question: how to crack a password on a computer still remains relevant. Unfortunately, it seems possible to actually find out the password from a computer only by choosing it correctly manually. Therefore, if you are not ready to spend several hours of your free time on this process, we strongly recommend that you simply reset it and come up with some new one.

Again, it’s much easier to just reset the password and come up with a new one afterwards. However, if you specifically need to find out the password, we recommend that for these purposes you use a program called, from the image of which you will need to make a boot disk. Having correctly configured the BIOS boot from the drive and installed this program, immediately upon entering the Desktop, a window will open in which you can see user names, including the Administrator, as well as passwords for their accounts.

When wondering: what to do if you forgot the password from your own PC, it is not at all necessary to use the above methods for restoring it. You can also reset your password in the Windows 7 operating system using the Net User command. To do this, while rebooting the PC you will need to press F8. Thus, you can open a Menu that allows you to make additional options for loading this operating system, in which you will need to select not just “Safe Mode,” but one that also supports the command line. While in it, you will need to select the built-in Administrator account and in the Command Interpreter window, immediately after this, system prompts will appear where you will need to enter net user “username” “password”.

We assume that you yourself understand that instead of “username” you will need to enter the name of your local user account, and instead of “password” you will need to enter a new password. If you did everything correctly, then in order to close the window, you will need to enter exit on the command line and restart the PC.

How to reset your password on Windows 8?

In the case of this operating system, things are much simpler! You can reset your password on Windows 8 as follows:

• On the login screen, you will need to click on the special power icon, which is located in the lower right corner of your screen;
• Next, you will need to press the Shift key and click “Restart”;
• Click "Troubleshoot";
• Click Reset PC;
• Click “Next” and the system will automatically reboot in order to begin preparations for resetting the password.

How to reset your password on Windows 10?

It is not so difficult to reset the password for Windows 10 users, of course, provided that they have access to the email or phone to which their account was linked. Otherwise, you will have to reset the password from the flash drive, as already described above.

How to reset Windows 7 administrator password?

The best way to reset the Windows 7 administrator password is through the Windows Command Interpreter. Follow the following sequence of actions:

1. First, launch it. You can do this by following the following path: Start - Run - Run the program - cmd. In the Command Interpreter menu that opens, you will need to enter: control userpasswords, after which a window called “User Accounts” will open;
2. Select the account for which you want to reset the password and do not forget to uncheck the box next to “Require username and password”;
3. In the window that opens, you will be required to enter and then confirm a new password. Next, in the command boot window you will need to enter Exit and restart the PC as usual.

View the passwords that Windows stores

In addition to the access passwords of various users, Windows also stores a number of others, no less important: the password for connecting to the Internet, passwords for mailboxes or access to websites. As a rule, there are quite a lot of them, so it is quite natural that they are forgotten over time.

The operating system offers an “autofill” function for passwords and other frequently entered information in browsers (Google Chrome, Yandex Browser, Opera (Blink), Firefox, Explorer 11, etc.). So it is not uncommon for a user to enter a password once, and after a few months, naturally, cannot remember it. Everyone understands that important passwords need to be written down, but not everyone does this. And if you no longer remember the password, how can you find it out, since it is displayed as a series of asterisks: ******?

The solution is offered by programs from different manufacturers that can obtain the password from this string of asterisks. There are quite a lot of freely available programs for decrypting Windows passwords or hidden passwords from input lines in various browsers.

We will use a program from Passware. This is an easy-to-use, freely distributed program that analyzes passwords hidden by asterisks and reports them to you. She is very easy to work with. Just highlight the password line and click the ‘recover’ button.

Of course, there are also commercial versions of programs, which, as a rule, have a greater range of functions. For example, Password Recovery Toolbox scans the system and identifies saved passwords, data saved for automatic filling, Outlook Express passwords, Internet connection passwords, etc. This information is then presented in a convenient form. A few more alternatives to the programs described above: , or Password Viewer.

Windows XP user passwords

Windows XP stores user passwords in a modified form. For example, the password "password" would be stored as a string like this: 'HT5E-23AE-8F98-NAQ9-83D4-9R89-MU4K'. This information is stored in a file called SAM in the C:\windows\system32\config folder.

This portion of the SAM file is encrypted by the syskey system utility to improve password security. The data necessary to decrypt the information after syskey is stored in the system file in the same folder. But this folder is not available to any user. Only the operating system itself has access to it during its operation. You can access the SAM and system files only when running a different operating system or by connecting the drive to another Windows computer.

All versions of Windows XP have an "administrator" account. This name gives the user full access to the system and the ability to reset the passwords of all other users. This can save you if for some reason you cannot log in with your regular user password. The specifics of using the administrator password depend on the version of Windows XP: XP Professional.

The administrator password is set during installation of the operating system. If you wrote it down or just pressed enter and left it blank, you can easily log in as an administrator and reset user passwords. To log in to the system in administrator mode, on the system welcome screen, press CTRL+ALT+DEL twice, a window for entering the administrator password will appear.

When the computer boots, go to ‘start\control panel\user accounts’ and change the required password. Since you are already here, this is a good opportunity to correct your mistake if you left the administrator password blank. In addition, it is advisable to change the name of the ‘administrator’ account. This name is known to everyone and is the first name used to gain access to your computer. To change the account name, right-click on 'my computer' and select 'manage'. Expand 'local users and groups' and open the 'users' folder. Right-click on the 'administrator' entry and edit it.
XP Home.

This system will not allow you to simply access your computer in administrator mode. First, you will need to boot your computer into crash protection mode. To do this: restart your computer; immediately after testing the BIOS, press F8 several times; in the menu that appears, select ‘start Windows XP in safe mode’ (boot Windows XP in crash protection mode). When the computer boots, log in with the username ‘administrator’. There is no default password. You can now change user passwords by going to 'start\control panel\user accounts'. When you're done, restart your computer as usual.
Creating a password reset disk

Windows XP allows you to write information to a regular floppy disk, which provides the ability to reset your password. Naturally, if you have already forgotten the password and cannot access the system, then you will not be able to create any disk, but it is worth creating such a floppy disk in advance to protect yourself from such accidents.

To create a floppy disk: go to ‘start\control panel\user accounts’ (start\control panel\user accounts); select the name under which you are logged in; In the related tasks menu, select ‘prevent a forgotten password’; follow the instructions of the wizard that starts.

To reset passwords using a floppy disk: if you enter the login password incorrectly, the system will ask whether you have forgotten it; At this point, you will be able to use your floppy disk by following the operating system's step-by-step instructions.

Be careful: If you used the built-in capabilities of Windows to encrypt files and folders, but did not install the operating system update (service pack 1), removing the password will result in the loss of encrypted information.

Utilities for changing passwords Windows XP/7/8/10

There are special utilities that allow you to edit or reset Windows XP/7/8/10 user passwords. The principle of most of them is to load a minimal version of an alternative operating system, such as DOS or Linux, under which you can access files with passwords.

An example of such a utility can be found at this address: http://home.eunet.no/~pnordahl/ntpasswd/ Instructions for operation, as well as files for creating a bootable Linux disk, are available on the same site.

Please note that if you have used the operating system's functions to encrypt files and folders, changing the password using any program will cause you to lose access to the encrypted data. In this case, the following method can help, allowing you not to replace the forgotten password with a new one, but to find out the old one.

Selection and decryption of passwords

If nothing else helps, but you have physical access to the computer, then all is not lost. You can rewrite the config and SAM files and try to decrypt the passwords stored in them using special third-party utilities. As we already said, for this you will have to use an alternative operating system, such as DOS or Linux. And when the files are at your disposal, you can use one of the programs for decrypting passwords, for example, LC4 or.

You will need:

1. Access to another computer.
2. At least two empty floppy disks.
3. An archiver designed to work with the command line, for example, RAR.
4. A DOS or Windows 98 boot disk (an image of the required disk can be obtained at http://www.bootdisk.com/) or a minimal version of Linux (for example, Knoppix). There is no need for boot disks if you can simply connect your hard drive to another computer. If you are using a DOS boot disk and the partitions on your hard drive use the NTFS file system, then to access them you will need a program that allows you to view NTFS partitions under DOS, such as NTFSDOS.
5. Program for obtaining passwords. We recommend using , as the beta version of this program is free, and the free version of LC4 is very limited.

Using a bootable USB flash drive:

1. If your hard drive has NTFS partitions, copy the NTFSDOS file to your bootable USB flash drive.
2. Copy the archiver (RAR) to the bootable USB flash drive.
3. Boot your computer from this flash drive. If there are partitions with NTFS, type the NTFSDOS command, this program will show which letter is assigned to your system drive, and you will need to use it instead of the letter C in the next step.
4. Place system files with passwords in the archive. For example, if you are using the rar32 archiver, the corresponding command will look like this: Rar32 a -v a:\systemandsam c:\windows\system32\config\system c:\windows\system32\config\sam If the files do not fit on one flash drive, the archiver will ask you to insert a second one.

Hacking passwords

Each program you select will display a list of accounts detected in the SAM file. Select those for which you need to define passwords. If you are using , select Attack type: Brute-force. If you used only numbers in your password, check the ‘all digits (0-9)’ box. Start the password recovery process using the command from the Recovery menu.

Password guessing can last from 10 minutes to several hours, or even several days, and may fail. Especially if the password uses letters in different cases, numbers and special characters.

This is a good way to check the strength of your passwords. If you just want to check your password, follow the steps above and see how long it takes to guess it.

Windows password cracking programs

There are a huge number of software tools that can help you crack your Windows password. Apart from the above-mentioned program, there is also Windows Admin Password Hack. But, unfortunately, it can no longer be called current, since it only works in Windows 2000/XP. Its closest replacement is MultiBoot 2k10, which is essentially a feature-rich boot disk.

conclusions

In any case, if one of your loved ones forgot the password for Windows 7, or you yourself were forced to face this, do not despair, there are plenty of solutions to this problem. Well, so that you no longer have questions about how to crack a password on a laptop, we strongly recommend that you save them somewhere, in notes inside your own smartphone, for example.

We hope you don't have to resort to the methods we've described. To avoid this need, remember to write down all important passwords. And if there is a real need to protect information on your computer, then use passwords made of characters in both registers and numbers and do not use ordinary words. In this case, your passwords will be very difficult to crack.

3 more useful articles:

A program that checks the strength of system user passwords. This utility is used by network administrators to calculate users with...

A simple utility that allows you to display passwords hidden by asterisks. Compatible with all browsers, including...

Windows Repair is a rare type of program that can rid your personal computer of almost all…

Nowadays, there are practically no fundamental means of protecting against hacking computer devices and gaining access to the user’s personal confidential information.

Setting an administrator password is also not very effective in protecting your computer, since there are at least several ways to hack and bypass it.

Hack the Administrator's password and log in using his account - easily and effortlessly

What these methods are will be discussed in this article.

Tip 1. Reset your password using the Command Interpreter in Windows

To do this, we sequentially perform the following steps:

• Click “Start” and select “All Programs”;
• in the tabs that open, click “Standard” and literally in the first lines of the list we see the “Run” option;
• in the “Run” command line, enter “cmd” and “Ok”;

  In the “Run” command line we write “cmd”

• A Command Interpreter window opens in front of us, into which we write the command “control userpasswords2”, then press “Enter;

  In the Command Interpreter window, enter the command “control userpasswords2” and click “OK”

• “User Accounts” appears on the screen – in the “Users” field, select the account we need;

  In the "Users" field, select the account we need

• uncheck the option “Require username and password”, then “Apply” and “Ok”;

  Uncheck the "Require username and password" checkbox

• in the “Automatic login” window that opens, enter and confirm the password or leave these fields empty, click “Ok”, “Ok” again;

  In the "Automatic login" window that appears, enter the password or leave the field empty.

• close the command line window and restart our computer.

Tip 2. Reset the password for the Administrator account in Safe Mode

To reset the built-in “Administrator” account, we proceed step by step according to the instructions below.

Step 1. Restart the computer and press the F8 key while loading.

To enter Safe Mode when you turn on or restart the computer, press the F8 key

Step 2. In the menu that appears, we are asked to select one of the additional options for loading the Windows operating system - select “Safe Mode”.

In the menu of additional boot options, select Safe Mode

Step 3. Next, log in to the system using the built-in Administrator account, which usually does not have a password by default. To do this, enter “Administrator” or the same word in Russian in the login field. Leave the password field blank and just press “Enter.”

In safe mode, select the non-password-protected built-in Administrator account

Step 4. In the window that appears warning that Windows is in Safe Mode, click “Yes” to confirm.

Click "Yes" to continue working in Safe Mode

Step 5. We start working in security mode - as soon as the desktop loads, click the following sequence of options:

Start –> Control Panel –> User Accounts

In Safe Mode, select "User Accounts"

Step 6. Place the cursor over the user name whose password you need to edit or reset, and click on this account icon.

Step 7. In the menu that appears on the left, select the “Change Password” item, enter a new password and confirm it. If we are simply resetting the password, then we leave this field empty.

In the menu on the left, select the “Change Password” option, then enter a new password and then confirm it

Step 8. Click the “Change Password” button.

Enter the password and confirm it

Step 9. First close the “User Accounts” window, then the “Control Panel” window.

Step 10. Reboot the computer.

Tip 3. How to reset the password for the built-in Administrator account

This advice will be useful to those who are faced with a problem when the built-in account is protected by a password, which we, of course, conveniently forgot. So, we act according to the instructions below:

1. We need a CD (or flash drive) with a set of resuscitation programs to restore Windows, which we insert into the drive, and then reboot our computer.

   A recovery disk is ideal for system recovery.

2. When starting the computer, enter the BIOS by pressing the “Dilete” key.

   Entering the BIOS using the Dilete key while restarting the computer

3. In the BIOS, we change the installation priority and assign the computer to boot from the CD-ROM. Next, we place our boot disk with the operating system in the drive and reboot the PC.

   In the BIOS we set boot priority from CD-ROM

4. After the computer boots from the CD-ROM, the recovery disk menu appears on the screen, in which we select the edited copy of Windows and go to “System Restore”.

   In the edited copy of Windows, select "System Restore"

5. Next, in the dialog settings of this window, click “Command Line”.

   In the System Recovery Options dialog box, select Command Prompt

6. In the command field that opens, enter “regedit” and confirm the command with the Enter key.
7. Find and select the HKEY_LOCAL_MACHINE section, and select File from the menu, and then Load hive.

   Find and select the HKEY_LOCAL_MACHINE section

8. We need to open the SAM file, then select the section HKEY_LOCAL_MACHINE\hive_name\SAM\Domains\Account\Users\000001F4, then double-click on the F key and go to the very first value in line 038 - the number 11, as shown in the photo.

   Select HKEY_LOCAL_MACHINE.. and double-click on the F key

9. We replace this number with the number 10, while being very careful, since only this number needs to be changed; other values ​​are strictly prohibited from being touched.

   We replace this number “11” with the number “10”

10. In the same section HKEY_LOCAL_MACHINE\hive_name\SAM\Domains\Account\Users\000001F4, select the File menu, then Load hive and then “Yes” - confirm the unloading of the hive.

    Select the menu File - Load hive and confirm unloading the hive

11. Now we close the registry editor, as well as the entire installation process, take out our disk and reboot the computer.

Hack the Administrator password in Windows 8

The Windows 8 operating system has its own simple way to reset the Administrator password. All you need to do to do this is follow the steps below:

Step 1. Go to the “System Restore” section, and then the “Diagnostics” console, where we select the “Advanced options” section.

Go to "Diagnostics" and select "Advanced options"

Step 2. Go to the command line and enter the following command:

copy from:\windows\System32\sethc.exe from:\temp – and copy the sethc.exe file so as not to accidentally lose it.

Copy the file "sethc.exe" to avoid losing it

Step 3. Now on the command line we write the following:

copy c:\windows\System32\cmd.exe c:\windows\System32\sethc.exe, that is, instead of “sethc.exe” we enter “cmd.exe”.

Replace the file “sethc.exe” with “cmd.exe”

Step 4. Exit the command console using the “exit” command.

Step 5. Reboot our computer and boot with the usual parameters.

Step 6. Press the “Shift” key five times to launch the command line.

Press the Shift key five times

Step 7. Enter “lusrmgr.msc” into the command console and see the administrator’s name.

Enter “lusrmgr.msc” into the command console and see the administrator’s name

Note: if the account is disabled, it can be activated using the command “net user “Admin_name” /active:yes”

Step 8. Set a new password - type the command “net user “Administrator name” password”.

Using the command net user Administrator name password set a new password

Step 9. Reboot the computer and log into the administrator account with a new password.

Login to the administrator account with a new password

It should be noted that this method is equally suitable for earlier versions of operating systems.

In these simple ways you can reset the administrator password on a computer and laptop in Windows 7, 8 and 10 operating systems.

Useful video on the topic

The videos below will clearly demonstrate how you can also hack the Administrator password.

Reset the Administrator password in Windows 7 using a small program

How to reset your Windows 8 login password

Resetting the Administrator password in Windows 10

Once again I am back to work on resetting account passwords, this time I will talk about a bootable USB flash drive with the Lazesoft Recovery Suite Home program, after which I will continue to search for new effective ways to reset the administrator password.

The program does not have a Russian interface, but this is not a problem, especially since in this article I will show everything and tell you with an example. Also, work will occur without problems both on a regular computer with a BIOS and on a device with a UEFI BIOS.

Creating a bootable USB flash drive from the Lazesoft Recovery Suite Home image

Well, let's go to the official website of the utility and download the version Home– the only free version is http://www.lazesoft.com/download.html.

Run the installation of the program and follow the installation instructions, everything is very easy. Then launch the icon program.

In this window we need to select the item "Disk Image & Clone".

Setting a password for your Windows account allows you to prevent unauthorized access to your computer, for example, children, and also open up additional system locking options - PIN code and pattern key.

The only problem you have to face after this is the loss of the alphanumeric combination, since it was not written down initially. Below are several popular ways to log into Windows 10 if your password is lost or forgotten. We will also tell you how to use services such as Xbox Live, Outlook.com, Skype, OneDrive to solve this problem.

Password reset methods:

Reset Microsoft Accounting Record Password Online

First, let's consider the scenario where data for online services was lost. Before doing this, double-check the correctness of the input: make sure that the required keyboard layout is set, the Caps Lock key is in the desired position, the program that automatically changes the input language does not interfere with typing the password (if there is one). Further:

Reset Windows 10 password using Dism++ software utility

This utility, which works in conjunction with the OS image, will help you reset your password on Windows 10. It needs to be downloaded to a USB flash drive from the official website of the developer.

Deactivate the Local Accounting ID in Windows 10 version 1809 and earlier

To get into the operating system offline and gain access to all the features of Windows 10, you need to reset the previously specified local account password. The method is only suitable if you specified hint questions at the key generation stage.

1. Click Reset Password on the login page.
2. Enter the required answers.
3. Enter another numeric value and confirm.
4. Activate access.

Reset Windows 10 password without software

If you did not use security questions during the account creation process, you can only reset your password using the above method using the “Password Reset Disk” tool. If there is no drive with the necessary data, skip this step. If available:

1. Click "Reset Password" on the login page.
2. Insert the drive into the slot.
3. In the reset wizard window, click “Next”, then again.
4. Follow the prompts on the screen.

Changing the user key through the built-in Administrator entry

The method allows you to reset your password on Windows 10 without a disk.

1. Click the "Shutdown" icon in the lower right corner.
2. Wait until your computer shuts down.
3. Wait for the internal system wizard to load.
4. Select the Troubleshooting section, then Advanced Options.
5. Select the command line.
6. Enter the following characters: “net user Administrator /active:yes” without quotes after System32. "Enter".
7. Select "Administrator" which will appear below the login window and your account entry.
8. Follow the chain “Start” - “Computer Management” - “Users”. Click on the accounting entry with your name and complete the procedure by generating a new key.
9. If you can’t find the “Users” section, try going directly to “Login Options” and changing the value.

How to Boot a PC Using USB

1. Turn off the computer, turn on and hold down the F2 key when the system starts. You will be taken to the BIOS;
2. Select “Security” and disable the Secure Boot Control command by clicking “Disabled”;
3. Select “Boot” and disable the Fastboot command in the same way;
4. Save your changes by pressing F10;
5. Select “Save & Exit” and below, under the “Boot Override” line, select your flash drive on which the OS image is loaded.

Additional password recovery method

Another method will allow you to change your password without a disk or flash drive.

1. Click the "Shutdown" icon in the lower right corner. Wait until your computer shuts down.
2. Press the power button and after 2-3 seconds hold down the “Alt+F10” buttons.
3. Wait for the system wizard to load. Select the “Troubleshooting” section, then “Advanced Parameters”.
4. Start the command line. Enter the value “control userpasswords2”, “Enter”.
5. In the “User Accounting Records” tab, uncheck the box next to “Require username and password.”
6. Come up with another key, confirming the changes. Restart your computer.
7. If the first combination did not help, use this one - “netplwiz”.

Recovering an OS password is a painstaking and nerve-wracking task. Next time be sure to write down the combination. If none of the methods work, you can go to the “Return the computer to its previous state” section in the recovery wizard, having first backed up the data (i.e.).

Sometimes forgetting your Windows 7 password is very annoying because you lose control of all the data on your computer under that account. You can find solutions on the Internet and still don't know how to unlock your computer. And some wrong actions can be harmful to your locked computer.

So here we will show you how bypass Windows 7 password 5 effective ways, whether you want to bypass the admin password or don't want to login.

Part 1: How to Bypass Windows 7 Password Using Command Prompt

CMD, Command Prompt, is an advanced administration tool on Windows computers. This is a powerful feature that helps solve some system problems.

The solution to bypass Windows password is quite old-fashioned, but works well every time. Here, to bypass Windows password, you need to first log in to your Windows 7 computer as a guest and then reset the Windows account password.

Log into your Windows 7 computer using a guest account. (Guest accounts do not require a password at all).

Copy and paste “cmd.exe” to your desktop. Rename "cmd.exe" to "sethc.exe".

Copy the file to C"\Windows\System32 and overwrite the file in that folder.

Restart your computer and press Shift 5 to enter CMD. Enter "net user myusername mypassword".

Here "myusername" is the user account name and "mypassword" is the new password for the administrator account. Press "Enter" to execute the command and restart your computer.

You can then use the new password to log into your Windows 7 computer.

Part 2: How to Bypass Windows 7 Password by Creating a New Account

If you simply forgot one of the administrator passwords on your Windows 7 computer, but you still have other administrator accounts available, you can log into your computer and create a new administrator account to bypass it.

Click Start and then type "cmd" into the search box. Right-click and select Run as Administrator.

When the Administrator Command Prompt opens, copy and paste the following command to reset a lost user password.

net user username new_password

"username" is the new account you will create and "new_password" is for your new account.

In this way, you can bypass the forgotten Windows 7 password and create another new account with a new password.

Part 3. How to Bypass the Administrator Password Using Windows Password Reset

If you forgot your admin password and didn't get an admin account, then you should use a password reset tool to help you bypass and create a new password for the admin. You don't even need to log in to your Windows 7 computer.

We don't intend to use here, but only use secure Windows password reset software to do this.

Tipard which can help you deal with such headaches in simple steps. With the help of a brilliant program, you can easily remove the password of your local administrator accounts from CD/DVD and USB drive. Moreover, you can also create a new administrator account in the software interface without going to the control panel.

Follow the instructions and bypass the password on your Windows 7 computer to use it again.

Download and install the appropriate Windows Password Reset software on an accessible computer.

To bypass a locked computer password, you may need to prepare a CD/DVD or USB disk as a bootable tool to burn Windows Password Reset on a locked Windows 7 computer. This way, you can download and install the appropriate Windows Password Reset software on an accessible computer.

Create a bootable CD/DVD or USB drive (consider the Windows Password Reset Ultimate version as an example).

Once you have successfully registered your chosen version of the program, you have two options to select CD/DVD or USB drive.

1. Insert the boot tool (CD/DVD or USB drive) into your computer, downloading this program. Then click "Burn CD/DVD" or "Burn USB".

2. Select "Burn CD/DVD" or "Burn USB" and click "Yes" to wait for the burning process to complete (for example, take "Burn USB").

Set to boot locked computer from boot disk/USB drive

1. Insert the boot tool into a locked Windows 7 computer and reboot the locked computer

2. Keep pressing F10/Delete/Esc/F8/F12 when the screen lights up

This write data will need to enter your BIOS interface of your locked computer, so you need to press a key to enter the BIOS interface.

Adviсe. The button required to press depends on your locked computer's motherboard, you may need to figure out which key you should press.

3. After entering the BIOS interface, select the "System Configuration" tabs and select "Boot Options" > enter "Boot Order" > change the "Boot Order" menu option and place the boot tool (CD/DVD or USB drive) first. At the bottom of the interface you will find some key tips to help you save your settings. And then close the BIOS interface. After this, your locked computer will restart again. Your computer will then enter the "Windows Preinstallation Environment".

Once you enter Windows PE, Windows password reset will begin automatically. Select Windows 7 where you want to bypass the administrator password.

If your Windows 7 was created by multiple administrators, then you can selectively select the user as you like by clicking on it.

Then click Reset Password and select Yes. And click "Restart" to start your Windows 7 computer. After this, you will find that the password of the selected account will be removed from Windows 7.

1. If you want to bypass password only in Windows 7, you can do it in this step. If you want to add another administrator for your Windows 7, you need to follow more steps as shown below.

2. This software will also help you bypass administrator password in Windows 10/8/Vista/XP and more.

Add an administrator account or other user account if you need it. Click "Add User". You can add another account and set a password for the new account (Ultimate version only). Click Reboot. And after that, take out your loading tool.

The bypass process will be completed and take out your boot tool and the computer will restart again. You will see multiple accounts (administrator account, previously locked account, or new account if one has been set) in the logging interface on your Windows 7 computer. And you will be glad to know that you can log into your account without typing anything. one password for your original locked account.

More password recovery tools for Windows, check it here.

Part 4. How to Bypass Windows Password Using Reset Disk

If you have created in the past, below were the simplest steps to help you bypass forgotten password in Windows 7.

When you enter an incorrect password, a message will appear in the Windows 7 login interface, and you need to click OK to close the message.

Click Reset Password and then insert the password reset disk you created earlier.

Follow the onscreen instructions to create a new password.

Then you just need to log in with your new password.

Note. The drive only works in the account you created, if you changed the Windows XP password for that account it still works.

Part 5. How to Skip Windows 7 Login Password

If you can remember your password but just want to skip the login window, then you can easily remove the password by following simple steps.

Click the Start button and then click your account picture to go to your accounts.

Click "Remove Your Password" and enter your current password and "Remove Password" to confirm your work.

You can then restart your computer to ensure that you are not stuck at the Windows 7 password login interface.

The whole process is simple, isn't it? You can try to bypass the administrator password on your Windows 7 yourself.

Conclusion

Here we are mainly talking about 5 ways to bypass forgotten password in Windows 7. No matter your password is admin or you don't want to login, you can also find precise solutions to fix it. Last tip: You can remove Windows 7 password directly to avoid additional stoppage when accessing your computer.

Of course, you could remove the set password.

Was your problem resolved?

Let me know if you have any questions by leaving your comments.