How to find out the password for school wifi. How to find out the password for your WiFi

Useful tips

This method is the easiest and most convenient. First, you need to go to the Control Panel and open the “Network and Sharing Center”, then in the left sidebar you need to select “Manage Wireless Networks”. There you find the name of your Wi-Fi router, right-click on it and select “Properties”. In this window, you need to find the “Security” item and check the “Display entered characters” checkbox. That's all. The password can be seen in the line above.

If you do not find the “Wireless Network Control Center” item, then you need to click on “Connection” in the notification panel, after which a list of networks will open. If you didn’t succeed this way, for example, because you can’t check the box or the password is simply not displayed, then you need to try another method.

Option for advanced users

This method is more suitable for advanced computer users as it is a little more complicated. In order to remember your Wi-Fi password, you need to connect to the router interface. To do this, you need to connect it to your computer with a network cable. The cable comes with the router. Then open your browser and enter network in the address bar. Typically the address is either 192.168.1.1 or 192.168.0.1. Then you need to enter your login and password in order to log into the system. The most commonly used login is admin and the password is admin. Sometimes the password can be 1234. If you are unable to log in, then you need to read the instructions, everything is described in detail there.

Once you have entered the interface, you need to find the section responsible for Wi-Fi security. It is usually called "Security" or "Wireless Security". The security item is located in the section related to Wi-Fi. At this point, you need to check the box labeled “Show network key” or “Unmask”. After this, the router will show you the key.

Password recovery using a special program

There is such a program called WirelessKeyView. It does not require installation. It must also be opened on behalf of the Administrator. The principle of its operation is that it shows all saved passwords in the system. Among these will be the password for your router.

If none of the methods help, then you need to do a full reset. After that, you can set it up again and choose a new password. But keep in mind that after resetting the settings you will not only have to re-enter the password, but also the parameters for connecting to the Internet and the name of the network.

You want to access the Internet using your neighbors' wireless networks, but you are unable to do so because they are password protected. Don’t be upset, because there are several methods for finding out the wifi password from your neighbors.

Computer password

Extracting information from router packet information. To successfully intercept packets of information, you will need to use specialized utilities. After downloading, you need to install them, read the detailed instructions and start intercepting your neighbors’ wi-fi routers. In the future, the application will provide the opportunity to decrypt the received information and highlight in it what you really need - the password.
Brute force. This is one of the simplest methods. However, its effectiveness is quite low. The Bruteforce program simply tries passwords from its own list. It will automatically enter available combinations of numbers and symbols until it finds a match. This utility is very popular among ordinary Internet users who do not understand programming and the intricacies of hacking. It should be noted that its functionality is quite serious. You can use this program both to find out your neighbor’s wi-fi password and to hack accounts on various portals on the network. All you have to do is download and install the utility, specify the required network and wait. The program will begin to try passwords on its own, without the user's help. However, this method is considered almost unpredictable, since a password can be guessed in either a couple of minutes or several weeks.
Manually brute-forcing the password. It is worth noting that this method is quite working. The fact is that many users do not pay enough attention to choosing a good password. That is why they use primitive combinations (for example, “qwertyui” or “12345678”). If you don’t want to connect and pay for the Internet, then just open the list of available wi-fi networks and start guessing. You don't need to think that your neighbors are brilliant people. They are ordinary users, so they often set passwords that are easy to remember. As practice shows, the more available wi-fi networks there are, the higher the chances of finding one where a simple password will be used.
Find out in person. If you have access to a neighbor’s personal computer connected to a wi-fi router, then you can easily find out the desired password. To do this, you need to go to the control panel, find the “Wireless Networks” menu and examine the properties of the available network. Then you need to check the “show password” checkbox. If you do this, all the asterisks in the password will become numbers or letters. Remember or rewrite your password and feel free to go to your own laptop and enjoy excellent speed. In addition, you can simply purchase a password from a neighbor or agree on a total monthly payment for the tariff.

Password for mobile device

If you have a mobile phone or tablet with the Android operating system installed, then you can also connect to someone else's Internet.

In order to find out your neighbor's wifi password, you need to use one of the available utilities. One of the most popular and functional is considered to be Wi-Fi Unlocker:

Enable Wi-Fi on your Android device. This can be done through the application. Launch Wi-Fi Unlocker and click "HackWi-Fikey". In the future, the Wi-Fi module will start automatically on your gadget.
Choose an accessible closed network. Then you will need to carefully scan the networks that are located within the operating radius of the module. Please note that it is recommended to choose a closed network that has the best signal.
Pick up the key and connect to your neighbor's Wi-Fi. After scanning (in most cases, this procedure takes only a couple of minutes), the utility will automatically find the weak points of a particular network, find the optimal key and connect.

This program has an intuitive interface and excellent functionality. Absolutely any user can understand it.

Sometimes each of us faces such a problem as a forgotten wifi password. You bought a laptop or tablet, or maybe a friend came to you with a laptop, but you don’t remember the wifi password.

Alternatively, you have to go through some combinations that should fit, date of birth, mobile phone number or passport number. But after several unsuccessful attempts, the question arises, how to find out WIFI password.
Later in the article we will consider such a case. Wi-Fi is connected on the laptop or computer, that is, the password is known. We need to connect another device: laptop, tablet or smartphone.

And so, in order to look up the Wi-Fi password on a laptop or computer with Windows 7, do the following.

On a PC or laptop that has Internet access, click on the Wi-Fi icon on the desktop. In the window that opens, go to Network and Sharing Center.

Then click on the inscription Wireless network

A window appears in which we click on Wireless Network Properties . In the next menu, select the bookmark Safety.

And going to another bookmark, put a tick in the line Show input icons .

Looking at the WiFi password in Windows 10

To view the Wi-Fi password on Windows 10, you need to click on the wifi icon on the taskbar and click on the menu in the menu that opens Network settings .

Afterwards, a window will open in which you will see a list of available Wi-Fi networks. Scroll to the very bottom and in one of the items we find a line with the name Network and Sharing Center .

Then in the window that appears, click on the item Wireless network, and then Wireless Network Properties. Then, in a new window, click on the Security tab and check the box to display entered icons.

Sometimes some users have some problems when viewing their forgotten password. There is no one of the menus described above in the article, or there is simply no device connected to the wifi network for which you forgot the password. The last option left is to go into the router settings and look for the forgotten password there.

In certain cases, this is even easier than navigating through the above tabs on your computer. In order to find out your WIFI password on the modem we will need to connect directly to the modem. This can be done with a twisted pair cable, which is available to every user for whom the company installed a modem. If you bought the modem yourself, the cable is included.

After you have connected your PC or laptop to the modem via wire, write the address 192.168.1.1 or 192.168.100.1 in the address bar of your browser, depending on the modem model. Then a menu appears in which you need to specify your login and password. The login and password to access the modem settings are initially the same for most modems: admin and admin .

With the advent of new gadgets, tablets, mobile phones, laptops, the need arose to remotely connect to the Internet without wires. A Wi-Fi router has become a real salvation, through which it is possible to connect an unlimited number of gadgets without losing the quality of the connection. Sometimes cases arise when you urgently need to connect to the Internet, but access is blocked by a secret code, and a dilemma immediately arises: how to find out the wifi password. There are several options for obtaining an Internet access code, the choice of which depends on various factors.

How to find out the password for your wifi on your computer

Wanting to protect themselves and limit outside connections to their Wi-Fi, users set a password. Relying on your impeccable memory, the secret code is not recorded anywhere, and if you do not use it for a long time, it is completely forgotten. When the need arises to connect a new gadget or change the settings of the router, users in a panic begin to guess passwords at random, losing a lot of time, effort and nerves. There are several ways to find out the secret Wi-Fi combination on your computer if at least one device is already connected to the network:

Through the Wi-Fi modem settings.
Through the wireless connection settings on a computer with Windows installed.

On Windows, through the wireless settings

If you have at least one device that is connected to a Wi-Fi network, finding out the password is not difficult. Only the administrator user can receive the encrypted code. Let's look at how to find out the wifi password through a computer with Windows version seven (it is possible to find out the access code on other versions of the operating system in a similar way):

You need to open the “Network and Sharing Center”, and this can be done in two ways:

Through the start menu, enter the “Toolbar” and find the required tab.
By right-clicking on the Wi-Fi or local network icon. After opening the context menu, select the required item.

In the window that opens, after the first manipulations, you need to find the “Manage wireless networks” tab. Some versions of the Windows operating system do not have this item, so to open the required menu tab you need to do the following:

Open the list of available wifi connections in the tray.
Find the Wi-Fi to which you need to connect (opposite the active connection there will be a sign “Connected”).
Call the context menu with the right mouse button and select “Properties” to find out the password.

In the new window, find the icon of the wifi network to which you need to connect, right-click, calling up the context menu. From the list that opens, select “Properties”.
A new window should open, in which there are two tabs, you need to open the “Security” item. On the same page, check the box next to “Display entered characters.”
In the “Network security key” line, the password that is required to connect to Wi-Fi will open.

Through the router settings

It is possible to find out a forgotten wifi code if no device is connected to the network. This can be done using the settings of the router or distribution point. Except for the case when the combination is forgotten, restoring the code can also be useful if the device distributing Wi-Fi has been reconfigured. Let's look at the instructions on how to find out the security combination through the router settings:

Connect a modem to your computer or laptop.
You need to open the browser that is installed on your PC and enter the address of the router that distributes Wi-Fi into the address bar.
In order to connect to the router interface, you must enter your username and password in the newly opened window. Classic admin/admin data.
In the window that opens, you need to open one by one – “Wireless mode”, “Wireless protection”.
A password will appear in the PSK Password line, through which you can connect to the wifi network.

Depending on the router, the setup process may vary slightly. So, on Wi-Fi devices from Asus, the password is located on the main page of the interface. And in some models, encryption is not displayed. In such cases, the best option is to change the password to a new one and, in order not to forget, you should write it down in a safe place. Sometimes it is not possible to find out the code, so the only correct solution is to reset the router settings, after which you need to reconfigure everything and create a new combination.

How to find out the password from someone else's wifi network

Sometimes it becomes necessary to connect to Wi-Fi, which is protected by a password, for example, from a neighbor’s or in a public place to a specific device. Sometimes it is impossible to connect to someone else's wifi, especially if the network is protected by WPA or TKIP encryption, since this type of protection is very reliable and high-quality. If necessary, you can try to find out the code; for this, one of several methods can be used:

Password selection.
Specialized hacker programs for breaking that help detect and capture data transmission packets.

Guessing the Wi-Fi password (primitive combinations)

Some users use simple encryption methods and primitive passwords to protect wifi, so hacking the system is very easy. If you need to connect to a specific device that distributes Wi-Fi, you can find out the code by selecting it. To begin with, you should try the simplest variations, which are surprisingly very common. The following are considered popular passwords:

123456789;
87654321;
Password;
Qwerty;
Wifi;
1234abcd;
Apartment number or company name and other options.

Special applications for hacking

Selecting wifi encryption is possible by using special programs designed to break the security. Popular ways to find out the wireless Internet access code are:

Brute force – selection or enumeration of a password using dictionaries. To search for the desired secret combination, you need several mandatory attributes: a laptop or computer, a Wi-Fi adapter and specialized software, for example, Linux Back Track 5. The principle of operation of this technique: the dictionary stores possible password options, the device, trying to connect, selects the keys . There is a high probability that you will be able to connect to the router this way, especially if the code is not complex.
Programs WiCrack, AirSlax.

How to find out the wifi password on your phone

It is possible to find out the wifi password using a mobile device with any type of OS, be it Android or iPhone. This is difficult to do, so in some cases such manipulations can only be done by experienced hackers and craftsmen. A possible way to hack the security is to launch special applications that are designed to search for open Wi-Fi access points or crack secret codes. It is important to monitor the quality of downloaded applications, since in some cases this may not lead to hacking of the Internet, but to infection of the gadget with a virus.

How to set or change a Wi-Fi password

When installing a router, it is important to immediately set up protection so that unauthorized users cannot use the Internet for free. This is especially true if the data is limited or when a large number of devices are connected, the quality of communication deteriorates sharply. How is it possible to set or change the wifi password:

When setting a password, it is important to select a certificate and encryption type. The highest quality ones are: security certificate – WPA2-PSK, type – TKIP or AES.
In order to secure access as much as possible, you need to choose the most secure password, and it is important to consider several factors:

Length: minimum 8 characters.
The secret code must contain letters and numbers.
You should not use primitive combinations, date of birth, surnames or classic names.
If you have difficulty creating passwords, you can use a special generator.

To change the password, you need to use the router settings. For tp-link, you need to open “Wireless mode” in the router interface, then “Wireless protection”. On the last tab you must enter a new password.
For updated D-link routers and Dir routers, the secret code is changed in the “Security Settings” section.
For Yota routers, you need to open the “Protection Type” tab and select the “Protected WPA2” option, and then set your password.
For classic Rostelecom modems, to install or change protection, you need to go through WLAN, then “Security” and set your parameters and secret code.

Video on how to view your WiFi password

Having forgotten the wifi password, many people despair. They immediately try to restart the modem by resetting the settings to factory settings. Either they turn to specialists for help, whose cost of services is sometimes too high, or they resort to the help of online consultants. Resetting the settings requires completely configuring the router from the very beginning, which leads to all sorts of difficulties. Finding out the secret combination or changing it is easy if your computer or other gadget is connected to the Internet via wifi. Watch the video to learn how to find out the access code without resetting the modem:

">">

Welcome, dear visitors! Many owners of home Wi-Fi routers and access points are faced with the problem of forgetting the password for their own Wi-Fi network. This happens for various reasons, for example, you have been using it for a long time or your provider set it up for you and provided you with a password. Or you simply forgot it over time, since the Wi-Fi network connects automatically when you start your laptop or computer, you don’t really think about the WiFi password for this wireless network. Wi-Fi works and is good. But sooner or later the question arises, how to find out the WiFi password from your home network?

Usually we want to see the wifi password when we want to connect a new device to a wireless network, be it a new laptop, phone or. If you don’t know the password for your own network, then don’t worry. In this article we will tell you how to find out the WiFi password through Windows and by logging into the router (or as it is also called a wireless Wi-Fi router). So let's find out where you can look up your network's authentication credentials.

How to find out the Wi-Fi password in Windows

This chapter of our instructions will help those of you who already have a network connected to a computer with a built-in WiFi module or to a laptop. If you have such a computer and the Wi-Fi network is already functioning on it, then finding out the password will not be difficult. However, we would like to warn you right away that this can only be done as an administrator, that is, you need to log in to your laptop or PC with administrative rights. on Windows you can read it at the given link.

So, we find the Wi-Fi icon in the form of a ladder in the Windows tray, or go to the “Control Panel” of the operating system. We need to find the item “Network and Sharing Center”, like in the picture:

Once in the Network Control Center, we find the menu item “Manage wireless networks”, as shown in the following screenshot of our instructions:

After this, you need to find a working Wi-Fi network that you want to connect to, right-click on it and select the “Properties” menu item. Here's a screenshot of how it's done:

Note that in some stripped-down editions of Windows 7 and Windows 8, the “Manage wireless networks” item may not be available; in this case, you need to open the list of WiFi networks in the tray, find your wireless Wi-Fi network, right-click on it and click on "Properties". How to find out the right network if there are many of them? It’s very simple, on the contrary it should say “Connected” (as already written above, if there is no connected network, then the whole idea of finding out the WiFi password from Windows is pointless).

So, having gone into the properties of the wireless Wi-Fi network, we need to go to the “Security” tab, as shown in the following picture (don’t forget that everything needs to be done as an administrator). After this, on the tab, just check the “Display entered icons” checkbox and the long-awaited password will appear in the “Network security key” line.

By the way, here you can find out the type of security and encryption type of your network, which can be useful when connecting a smartphone or tablet. It would seem that the article can be completed and we managed to find out the WiFi password, but what to do if you do not have a connected wireless network, how can you find out a forgotten WiFi password in this case? In this case, our path lies straight to the interface of the router or access point, depending on what Wi-Fi is distributing.

How to view the wifi password on a router

Surely for beginners it will be difficult to enter the Wi-Fi router itself. But here too website rushes to the rescue. At the following link you will find a complete guide. Briefly this is done like this:

Open the browser.
We enter the WiFi router address into the address bar - it is either 192.168.0.1 or 192.168.1.1.
In the window that appears, enter the username and password for the interface.

If you don’t remember the router password, you will have to reset the settings using the “Reset” button, which is located on the back of the router, and again. In principle, we have already described further actions in the article on how, but for clarity, we will probably repeat ourselves. Since everyone's routers are different, the interface of these routers will also differ. If you find yourself in the settings for the first time, then don’t be afraid. You need to look carefully and find the router menu item, which is usually called “Wireless” or “Wireless Security”.

On routers with Russified firmware, you need to look for the “Wireless network” item.

As you can see from the previous two pictures, the field itself where the WiFi password is set can have different names. This can be “PSK Password”, “WPA-PSK Key” or simply “Passphrase”. If you really can’t find the item you need in the settings, then download the manual for your router model. It is worth noting that not all routers display the password:

If the password is not visible in the settings of your Wi-Fi router (as shown in the screenshot above), then you just need to change it to another one. Finally, we want to answer a question that interests many: how to find out your neighbor’s wifi password. In fact, everything is not as simple as you think, dear readers. If the Wi-Fi network is protected by encryption such as TKIP, WPA or WPA (we wrote about them), then hacking someone else’s network is quite problematic, since these types of encryption provide good channel protection.

For inquisitive minds, we advise you to look at the article, which describes a method for brute-forcing passwords, provided that the model of the wireless router is known. We want to end here. If you encounter any difficulties or simply want to ask a question, please do so in the comment form below.