How to find out the name of the motherboard in a computer or laptop. Several ways to find out the brand and model of the motherboard on a computer or laptop How to find out the name of the motherboard if the computer does not work

Twitter

If you need to find out the model of the motherboard that is installed in your computer, then the easiest way is to disassemble it and look at the model name on the motherboard itself. In most cases, to do this, it is enough to remove one of the side covers of the system unit.

Why do you need to know your motherboard model?

The name of the motherboard is not the most important characteristic of your computer. But under certain conditions you need to know it:

You need a description of the motherboard to find out the compatible types of processors, the maximum amount and type of RAM, the number of slots for it, the presence of a RAID controller, and much more. This information will be useful when upgrading your computer.
You need to download drivers when installing the operating system or change the BIOS firmware.
When conducting an inventory to account for IT equipment in your organization.

When it is not possible to find out the motherboard model

In some cases, it is not possible to disassemble the computer and read the name. For example:

You do not have physical access to the computer. This is relevant when you remotely administer a computer in another building, city or country.
Laziness. No one wants to crawl under tables on the floor between waste baskets, spare shoes and workers' bags.
The system unit is sealed. Damage to seals may void your seller's warranty.
You do not have a tool (screwdriver) to unscrew the screws and remove the system unit cover. This is also possible, because the fasteners may be star-shaped, or you went to see a girl you know for a minute, who simply doesn’t have a screwdriver, and a nail file can’t cope with the task.

How to find out your motherboard model using programs

If you use a Windows operating system on your computer, you can use several hardware diagnostic programs. For example speccy.

How to find out your motherboard model from the command line

However, the easiest way is to use the command line. That is, you do not need to install any additional software; the built-in tools of the Windows operating system are sufficient.
To find out the motherboard manufacturer, use the command wmic baseboard get Manufacturer
You should see something like the following.

I would be grateful to your site if you give me some advice how to find out the motherboard model And ? I bought the computer secondhand, and of course there was no box with drivers and instructions for the motherboard. I installed the Windows 7 operating system, immediately went to Device Manager and found many yellow circles with exclamation marks (devices for which drivers were not installed automatically). I know that there is a program called AIDA64 that can show all the devices installed in the system unit, but I don’t want to install it.
Hello! Please tell me how to find out the name of the motherboard, I opened the side cover of the system unit, but there is no name on the motherboard? And is it possible to somehow find out the model of the monitor, there are no identification marks on it either.
Explain how to determine the model of the motherboard of my laptop, should I not open it?
. Evgen.

How to find out your motherboard model

Hello, friends! Of course, this question will seem simple to an experienced user (for example, you can find out the model of the motherboard by simply typing the command wmic baseboard get product on the command line and the name of the motherboard will immediately appear),

But believe me, even people involved in computer repair have had situations when they had to grunt and tinker, and even say a strong word, in attempts to determine whether the motherboard belongs to one or another manufacturer. And not always, when you open the cover of the system unit, you will see the inscription ASUS, GIGABYTE, ASROCK, MSI, sometimes there is simply nothing there to hint at the name of the motherboard. What about laptop owners?

In our article we will tell you how very simply find out your motherboard model, video card, processor, monitor and almost everything that you have installed in your system unit.
With this question, you can help in several ways. Firstly, you can open the cover of the system unit and see its full name on the motherboard itself, secondly, you can use the AIDA64 program, if you do not want to use this cool program, then in most cases you can find out the model of your motherboard on the website http://www .intel.com. So let's get started. With the computer turned off, open our system unit and see the model of our motherboard.

If you don’t find any name there, but you still have a beautiful box from your motherboard, then the name can be seen on it. Maybe there is still an instruction manual, in it you can also find out the name of the main component of your system unit.

If everything suggested above does not lead to success, then we use this method. Since most modern motherboards consist of a chipset (chipset) from Intel, the model of your motherboard can probably be found on the Intel website!
Follow the link http://www.intel.com/support/ru/siu.htm Click on the button Identification of software and hardware on your computer.

Your computer components are analyzed

and here is all the information about the components installed in my computer

SYSTEM BOARD INFORMATION
Manufacturer ASUSTeK COMPUTER INC.
Model P8Z77-V LX2

Let's say the first two methods did not help us, then we use one good and very simple program. It is paid, but for the first 30 days of use it is free, as if allowing you to get to know yourself better before purchasing.

Let's go to the website of the AIDA64 program at https://www.aida64.com/downloads/ , click on the button Download.

Download the program in the installation file, click on AIDA64 Extreme Edition Trial version, self-installing EXE package, Download.

Downloaded, run the file aida64.exe.

Very easy installation of the program

In the main program window, click Computer.

Summary information.

Everything that we have installed inside the system unit is very clearly presented:
Motherboard model
Asus P8Z77-V LX2 (2 PCI, 2 PCI-E x1, 2 PCI-E x16, 4 DDR3 DIMM, Audio, Video, Gigabit LAN)

and its chipset Intel Panther Point Z77, Intel Ivy Bridge

QuadCore Intel Core i7-3770 processor, 3833 MHz (39 x 98) video adapter, sound card, RAM, monitor, hard drive, BIOS type, and so on and so forth.

If you left-click on the name of the motherboard, a small menu will open, with which we can go to the official website of our motherboard, find out complete information about it and download drivers for it.

To download drivers on the official Asus website, select "Support", then "Download"

Read the next article “How to download and install drivers on the motherboard”

The motherboard is the basis for any computer. It depends on what components can be used in the computer. Therefore, when assembling or upgrading a computer, you need to know the exact name of the motherboard.

How to find out the name of the motherboard on a work computer

If you have a working computer and need to find out the name of the motherboard that is used on it, then you do not need to disassemble the computer to do this. All the necessary information about your motherboard can be obtained programmatically.

For example, you can simply execute two commands one after another. At first " wmic baseboard get Manufacturer", and then "wmic baseboard get product". The first command will display information about the manufacturer, and the second command will display the exact name of the motherboard.

If you don't want to mess with the command line, then you can get information about the motherboard name using third-party programs. For example, you can use the CPU-Z program. This program collects all available information about the computer configuration and provides it in a convenient form. At the same time, CPU-Z is completely free and can be downloaded from the developer’s official website. After downloading, you need to launch the CPU-Z program and go to the “MainBoard” tab. All basic information about your motherboard will be available here, including the board manufacturer and model name.

Also in the CPU-Z program, on the “MainBoard” tab, you can get information about the chipset and BIOS that are used on the motherboard. On other tabs of the CPU-Z program you can view data about the processor, RAM and video card.

How to find out the name of the motherboard if the computer does not work

If your computer is not working or you haven’t even assembled it yet and you need to find out the name of the motherboard, then the methods described above will not help you. In your case, you need to inspect the motherboard itself. In most cases, the name will be printed on the motherboard itself. The name is written in capital letters, so it will not be confused with other inscriptions.

After a clean installation of the Windows operating system, you often have to install missing drivers that were not found by the system in the standard image. In order to know which drivers are suitable for your motherboard, you need to know its manufacturer and model. Therefore, in today’s article we will look at how to find out your motherboard. Without this information we will face a number of problems:

We will not be able to install the correct drivers;
We will not be able to select a processor;
We will not be able to add RAM,
We can't;

Also, if the necessary drivers are not installed on the motherboard, you will not be able to play 3D games, you will not have sound on your computer, video will not play, and so on.

We look at the manufacturer and model on the motherboard packaging.

Probably the easiest way to find out your motherboard is to find its box. As a rule, when you buy a computer in a store, they give you boxes of components. This is done so that in the event of a defect or breakdown, the store can send the problematic part to the service or supplier. Therefore, we look for the box and look at the motherboard model on it. The packaging will also indicate other important parameters:

the type of RAM memory that can be installed on this motherboard;
Information about the video card supported by the board;
chipset information;
bus frequency;
information about service utilities.

It often happens that the box from the motherboard has not been preserved, then you can look for the sales receipt. In most cases, it contains the name and characteristics of the components. Or find a warranty card. If there are no papers, then you may still have the installation disk with drivers. We look at the information on it or in the help files.

How to find out your motherboard by disassembling the system unit?

If no documents or boxes from the motherboard have been preserved, then you can open the side cover of the system unit and see the model of the motherboard.

To do this, perform the following steps:

Note!

If your system unit is still under warranty, then it is possible that after you remove the side cover, the seal will be broken and you will lose it;
If the motherboard name is hidden behind any component, you will have to remove it. I advise you not to do this if you do not have the necessary skills. Otherwise, you may damage the device.

Therefore, if you don’t want to get into the insides of the system unit, then let’s look at software methods for finding out your motherboard.

How to find out the motherboard model using Windows.

In order to quickly find out information about the motherboard, you can use the Windows command line.

To do this, click “Start” - “Run” or use the hotkey combination “Windows + R”
Enter the command “cmd”
Next we write the code: wmic baseboard get Manufacturer

The program will give you information about the motherboard manufacturer.

There is also another way to find out the motherboard model, to do this, go to the “Run” line enter the command “msinfo32”

The System Information window opens. Here you will see all the data about the computer that the operating system was able to obtain. In my case, only the motherboard manufacturer is displayed. Not available in the “Board model” item.

As you can see, using Windows tools it is not always possible to obtain the necessary information, so let’s move on to the next step.

Let's find out information about the motherboard using programs.

To obtain information about the manufacturer and model of the motherboard. Let's use special programs created for these purposes. Let's consider only free methods.

CPU-Z - this utility always helps me, motherboard, memory, and its similar version GPU-Z allows me to answer the question:.

You can download the CPU-Z program from the official website. After opening the program, go to the “Mainboard” tab. Here the utility will lay out for you all the available information not only about the model and manufacturer, but also about its main characteristics.

AIDA64 – I have been using this program for a very long time; previously it was called Everest. Probably the most important disadvantage of this utility is that it is paid, but there is a free period for a period of 30 days. This will be enough for you to recognize your motherboard.

In order to find the necessary information, launch the program and go to the “Motherboard” tab. A window will open with the characteristics of your board, as well as a bunch of useful information. Using the AIDA64 program, you can install missing drivers, as well as update old versions to newer ones.

The functionality of the program allows you to view such important parameters as processor frequency, memory buses, and the amount of RAM. Can show the temperature of the processor, video card and other components of the computer system unit. In order to test computer components for stability, and to determine in which hardware failures occur. You can use the “Test” tab.

Conclusion.

In today's article, we looked at several ways to find out your motherboard. I hope that now you will not have problems finding the necessary drivers. And also, if you want to upgrade the processor, video card or add RAM, then when you go to the store and tell the seller the name of the motherboard, they will be able to select the appropriate components for you.

Hi all! Once upon a time, I wrote about what it is. A lot of time has passed since the purchase, so you reinstalled Windows, and now we need to download drivers for the chipset, sound and other equipment soldered to the motherboard. (As a rule, all disks and documents tend to get lost over time)

And then the question arises in many people’s minds: how can I find out what model my motherboard is? Or are you ready to buy a new video card or processor? Again, until you find out the motherboard model, it will be difficult to determine anything. If in the case of drivers you can find them by hardware ID, then in case of an upgrade this will not work.

Visual identification of the motherboard model and manufacturer

How to find out the motherboard model visually? Very simple, for this we need a screwdriver and good lighting. We unscrew the bolts from the side cover of the system unit and remove it away so that it does not interfere.

Now the most important thing is to carefully examine the motherboard. Unfortunately, some manufacturers manage to write a name where you wouldn’t find it during the day. Typically the marking is placed above the PCI-E slot or next to the processor. For example, in the photo below, the motherboard is labeled GA-790FXTA-UD5. It is this name that we will enter into Google or Yandex to determine the characteristics of the equipment or download drivers

This method is old-fashioned and has never failed, but I would not recommend it to you. Firstly, you will have to open the system unit (which is not at all good if it is sealed and is under warranty), and finding the name of the motherboard is not always easy (especially if you opened it for the first time, because there will be a bunch of inscriptions and you simply will not understand: what this is where the board model is), and secondly, there are much simpler ways 😉

You can find out the motherboard model programmatically

The software does not stand still. The CPU-Z program is also being developed. An excellent utility is designed to obtain information about the central processor, but it will also help us suggest the motherboard model. You can download it by visiting the official website of the program.

Please kindly report broken links:

Go to the CPU-Z download site[Size: very small]

So, open the program and go to the “Mainboard” tab. Here we can see the manufacturer in the Manufacturer line and the model itself in the Model line.

There should be no questions here, since the method is as simple as three pennies. However, there are other programs to understand what is inside our computer?

Perfect for these purposes AIDA64(in the old days it bore the proud name Everest). The purpose of AIDA is to show us complete information about the equipment installed in our computer. Unfortunately, the program is paid, but has a 30-day trial period (I think this time will be enough to decide on the motherboard model)

In the left window, expand “System board” and select “System board” (I understand that I wrote something crazy, but it is true - look at the screenshot above). In the right window in the line “Motherboard” we see the exact name of our motherboard.

How to determine the motherboard model using Windows

In my opinion, the easiest way to find out what motherboard is installed in your computer is to ask it on the command line. You don’t need to install anything, just open the “Run” menu (if you can’t find this item, then read about it). In the window that appears, type CMD. The command line will open, which means that all that remains is to enter the commands:

- to determine the motherboard manufacturer - wmic baseboard get Manufacturer
- to determine the motherboard model - wmic baseboard get product

The picture below clearly shows what it looks like.

In the article, it makes no sense to consider all the ways to find out the model of the motherboard, and there is no need for this, because the steps given here allow us to answer our question fully. All the best 😉

In contact with