How to install a new router. How to connect to a router: step-by-step instructions

Modern man cannot imagine his life without the Internet. We work, communicate, play, study, have fun on the global network and it is no longer possible to do without all this. Meanwhile, in Lately More and more attention is being paid to Internet speed. Fortunately, slow Internet is a thing of the past and now we can afford to travel the vastness of the World Wide Web on high speeds. Many regions have been in the coverage area for a long time 3G and 4G, which allows you to use wireless Internet at fairly high speeds. However, no matter how hard we try mobile operators, they have not yet been able to achieve the speeds that wired Internet can provide, and therefore the questions still remain relevant - how to connect a router and how to configure the router .

Home WiFi router offers a lot of advantages and that's it more people decide to purchase it. We have prepared detailed instructions for those who want to know how to connect router and configure it. Let us immediately note that there is nothing difficult in installing, connecting and configuring a WiFi router (another name for a router). You just need to be patient and follow the instructions below. Of course, today many companies offer router installation and configuration, but you will have to pay for this work. If you are not ready to spend additional money, then this article will be very useful for you.

Before we tell you how to set up your router, it should be said that the setup procedure may differ depending on specific model WiFi router, and therefore we have prepared several more articles with a detailed description of the installation and configuration of the most popular routers. Here we will look at the main points. As the article progresses, links to more detailed instructions will be posted. So, let's assume that you already have a WiFi router and all you have to do is install and configure it.

Where is the best place to place a WiFi router in an apartment?

Before installing a router in an apartment, you need to decide on the most optimal location for its location. From correct location Your home wireless router depends on the WiFi coverage area. Particular attention to this point should be given to those who live in fairly big apartment or home. Router manufacturers indicate the maximum signal range in the instructions, but you should not count on these numbers. The fact is that a lot depends on the material from which the walls of the apartment are made. Moreover, do not forget about all kinds of interference, for example, an ordinary aquarium or cabinet can reduce the coverage area.

Many people are convinced that the optimal placement WiFi router is the table on which the computer or itself is located system unit. We do not recommend that you choose this location because the signal quality and coverage will be much worse than the WiFi router's specifications allow. It is preferable to place the router approximately in the middle of the apartment and as high as possible. If you live in a one-story house, then the WiFi router should be placed approximately as in the picture below:

For a two-story house, the following router location would be optimal:

We noted above that installing the device next to the computer is not the most the best option, but did not explain why. The fact is that other sources of electromagnetic interference worsen the performance of the wireless router, therefore, you need to place the router away from such sources, which include not only a PC, but also a microwave oven, cordless phone, etc.

How to install a router

Everything is clear with the location of the WiFi router, besides, if you have a small apartment, there will be no problems with the coverage area, the main thing is to place the device away from the sources electromagnetic waves. Now let's find out how to install the router. If the process of setting up and connecting a router involves certain differences depending on the specific device model, then the installation will be standard in almost all cases. In principle, the main thing in installing a router is to correctly determine the location of the device, but we have already dealt with this.

Open the box with the router, take it out and connect it to the power supply. The lights on the front side of the WiFi router should light up; if this does not happen, then there are some problems with the device and to solve them you need to contact the store where the router was purchased. On the back of the WiFi router you will find several ports. However, we will examine this point in more detail in the next section. We believe everything is clear on how to install the router. We will not teach you how to use the tool necessary to secure the device, but the connection process is worth considering.

How to connect a router to a computer

WiFi routers may differ depending on the specific model, but they have a lot in common. Below we will look at the functionality and process of connecting a regular WiFi router. Modern routers have at least four LAN ports through which the connection to the computer is made. Also, any router must have a WAN port intended for connecting a cable from the provider.

Speaking about how to connect a router to a computer, it should be said that this procedure is extremely simple and any PC user can handle it. For correct connection need to be done the following actions:

• Crimp correctly twisted pair (network cable), if necessary;
• Connect the WiFi router to the power supply;
• Connect the network cables (provider cable and cable to the computer);
• Set up the network (detailed setup instructions below). The connection diagram of the router to the computer is shown in the picture:

Let's look at how to connect a router to a computer if the WiFi router is already connected to another PC, that is, you need to add another device to your home network, for example, a laptop.

We connect one end of the cable to LAN connector of the WiFi router, and the other into the connector of the PC network card. After connecting the cable, a network access icon should appear on your computer monitor.

If the corresponding icon does not appear, then most likely the problem is that the network card is disabled. Another reason for the lack of a network connection icon is the lack of the necessary drivers. Let's go to “Control Panel\Network and Internet\Network Connections” and check the visibility of our network card. If you see a network card and it is simply disabled, then you need to enable it. To do this, click on it right click mouse and select the item "Turn on". If the network card is not displayed, you need to install the appropriate drivers. To do this, you will need a disk, which should be included with the router. If there is no such disk, download the necessary drivers from the Internet.

Speaking about how to connect a router to a computer, it should be said that another situation is possible when, after connecting the PC to the WiFi router, the corresponding icon appears, but with exclamation mark, that is, there is no way to connect to the Internet.

Similar problem The most likely solution is to configure the network card. Through the control panel, go to network connections, then in properties select the item and press the button "Properties". Selecting items "Obtain an IP address automatically" And "Obtain DNS server address automatically", after which we save all the settings. After this, the WiFi router should automatically configure itself to distribute IP addresses. However, sometimes the Internet does not work even after these actions. In this case, you need to check the cable or the router itself for serviceability. So, we hope everything is clear with the connection, now let's find out how to configure the router.

How to set up a router

As has been mentioned many times, the router setup process may vary depending on the model you purchased. However, despite the huge variety of models and manufacturers, all wifi routers perform the same function, and therefore they are characterized by similar functionality and configuration tools.

Of course appearance The router configuration interface (web page on which the router settings are made) is unique for each manufacturer, and therefore we have prepared several separate articles dedicated to configuring the most popular routers today.

So, take a look at the model of your wifi router and then check out the list of articles below with instructions for setting up various routers, if your device is on this list, follow the link. (If you don’t know how to get to the settings page, read this article to the end).

d-link router dir-300: Wireless router 802.11g DIR-300. The DIR-300 is based on the 802.11g standard, but is also backward compatible with the 802.11b standard, ensuring compatibility with a wide range of wireless devices. contains four Ethernet ports. Thanks to D-Link Quick Router Setup Wizard(To the master of quick installation router), network setup can be completed in minutes. supports the system WiFi Protected Setup™ (WPS), which simplifies wireless network and security setup.

Router d-link dir-615: Supported Wi-Fi standards: 802.11b/g/n (draft)
Network interfaces: 4 LAN 10/100Base-T ports, 1 WAN 10/100Base-T port. WAN connection types: Static IP, Dynamic IP, PPPoE, L2TP, PPTP, DualAccess PPPoE, DualAccess PPTP.

Zyxel router Keenetic: Adapted to work in the networks of leading Russian providers. Internet speed via PPTP and L2TP - up to 55 Mbit/s, via PPPoE and IPoE - up to 70 Mbit/s. Torrent download speed is up to 5 MB/s with a number of sessions of about 500. Link Duo technology for simultaneous work on the Internet via PPTP/L2TP/PPPoE and with regional network server resources. Supports IEEE 802.1X standard for Internet access.

tp-link router: The vast majority of Tp-Link routers run on firmware similar friends to each other like two peas in a pod. The only significant difference is different languages Default software for a specific model.

Asus router: High-speed wireless 4-port router. Configuring Asus routers fundamentally differ in configuration by only two firmware versions, let's look at both of them.

Rostelecom router: There are several types of routers from Rostelecom, we will look at setting up the following: Rostelecom universal routers - Sagemcom f@st 2804 v5, v7 and v7 rev.1, Sagemcom f@st 3804, QTech RT-A1W4L1USBn and Startnet AR800.

The above articles contain detailed instructions for setting up wifi routers certain models and manufacturers, but this manual does not end there. It is not enough to know how to configure the router directly in the configuration interface. You will also have to configure the network card settings. In addition, many of you will find it useful to know the IP addresses of the device in local network. All these points are also included in this article.

Configuring network card parameters

Before attempting to log into the router interface, you must configure the network card correctly. To do this we go to "Network connections" by pressing a key combination Win+R and enter the command ncpa.cpl.

Click "OK". The Network Connections window will open. Right-click on the one through which the router is connected to the computer:

Next, select the item "Properties" and in the window that opens "Local Area Connection Properties" double-click on the component with the left mouse button "Internet Protocol Version 4 (TCP/IPv4)". Don't forget to tick the automatic receipt IP addresses and DNS addresses.

In the vast majority of cases, a wifi router has an active DHCP server looking into the local network, which will issue an IP address to your computer. You can view it at "Connection status" by pressing the button Intelligence .

So, we hope everything is clear with the configuration of the network card parameters, now let's move on to the final section of today's article.

IP address of the device on the local network

After connecting the router to your computer, you will need to go to the router configuration interface to complete the setup. This is done by entering address bar web interface addresses. Each router has an IP address on the local network, most often it is 192.168.1.1 . however, other options are possible, for example, devices from D-Link and NetGear have an address 192.168.0.1 , and routers TrendNet - 192.168.10.1. So, if you have a router, for example, D-Link, then you need to enter the following into the address bar of your browser URL: http://192.168.0.1. After this, a page with a form for entering a user name and password to access the web interface will appear on the monitor. Typically, the username and password have the same meaning - admin. Although exceptions are possible. The router's IP address, username and password are often indicated on a sticker located on the bottom cover of the device.

If you can’t log into the web interface, first of all you need to check whether your computer receives an IP address from the device’s DHCP server. It also makes sense to try to register the IP address manually in the protocol settings TCP/IP. After that, try pinging the router. This procedure is done as follows: open command line and enter - ping 192.168.1.1.

I guess we'll end here. Now you know how to connect a router and how to configure the router. Don't forget that links to articles with more detailed instructions router settings from various manufacturers posted above.

If the power of the router is not enough for stable Wi-Fi coverage of an apartment, home or office, there is a need for additional devices. There are three ways to enhance weak signal main router: install additional antenna, repeater or another router. Each method has its own advantages and disadvantages; let’s take a closer look at the third option.

How to set up a router

To configure the router, connect a computer or other device with a web browser installed to it:

• You can connect your computer with a cable by connecting the PC network card to a free port LAN router;
• You can connect to the router via a wireless Wi-Fi network using a laptop, tablet or smartphone.

By default, the wireless network is assigned a name (SSID) identical to the name of the router model, and access to the distributed Wi-Fi network is not protected by a password.

After establishing a connection with the router, open a web browser on your computer or connected wireless device and type the router’s IP address in the address bar. For example, for a router TP-LINK address will be as follows: http://192.168.0.1

Illustrations taken from Settings TP-LINK router TL-WR 1045, other manufacturers' control panel looks different, but general principles, abbreviations and terms will be the same.

Entering the router's IP address in the browser's address bar will open access to the control panel

The correct IP address, login and password required to log into the control panel are indicated on the plate attached to the bottom of the router.

The IP address, login and password of the control panel are indicated on the nameplate on the bottom of the router

The login and password indicated on the sign apply only to the control panel, but not to the wireless network distributed by the router. After entering your login and password, the main screen will appear, displaying information about the status of the device and providing access to menu items for setting modes.

Do not change the factory settings of the router unless necessary. After making changes to the router settings, reboot the device.

Video: setting up a Wi-Fi router

Two ways to connect routers

Routers are connected to one local network either by cable or by wireless channel. It is recommended to use devices from the same manufacturer.

Cable connection

Cable " twisted pair"(UTP cable) is laid between the main and additional routers. In the main router, the cable is connected to the LAN socket, and in the additional router - to the WAN socket (this socket is highlighted in color and is sometimes called Internet). With this connection, the additional router will be for the main one network device, and the main one for the additional one will act as a provider, distributing the Internet and providing a dynamic IP address.

Before installing an additional router, consider how the cable will be laid and carefully measure the length of the future cable channel. When purchasing a cable, buy one meter longer than the measured cable channel, and ask the seller to immediately crimp the ends of the cable into the connectors. If the cable channel runs outside the premises and is exposed to natural influences, then purchase a cable with a reinforced sheath.

Advantages of the method:

• reliability and stability cable connection;
• easy setup of both routers;
• The installation location of the additional router is not limited by the wireless coverage area of ​​the main router.

Disadvantages of the method:

• the need to purchase and lay cables;
• When moving the router, the cable will have to be moved to a new location.

Configuring routers when connected by cable

If main router If you are already configured to work with the provider and have no complaints about the work, you do not need to change anything in the settings.

Make sure that the DHCP function in the main router is enabled to automatically distribute IP addresses on the local network. The start and end IP addresses do not need to be changed.

Setting up an additional router

It is recommended to immediately reset any changes made to the router settings to those preset by the manufacturer. To do this, turn on the router, find the Reset button on the rear panel, press and hold it pressed for 5-7 seconds. To protect against accidental reset of settings, the button is hidden inside the case and can be pressed through the hole using a needle or an unbent paper clip.

An example of the location of the reset button on the back panel of the router: the button is hidden inside, only the hole for pressing is visible

In the additional router, two settings are checked and set:

Making changes to the additional router’s own IP address allows you to avoid conflicts of identical addresses on the same network

After changing the router's IP address, to re-access the control panel, enter the new address in the browser's address bar.

There is a cable connection option in which the cable is connected to the LAN port of an additional router. This option requires complex setup and does not provide any advantages over a WAN port connection.

Wi-Fi connection

Advantages of the method:

• does not require physical connection routers with cable;
• makes it easy to move if necessary additional router.

Disadvantages of the method:

• relative complexity of setup;
• slowdown in wireless network speed.

The main router receives Internet from the provider and distributes it via the wireless network LAN1; the additional router receives the Internet wirelessly from the main router and distributes it via the LAN2 wireless network

Configuring routers when connecting via Wi-Fi

When two routers are connected on a local network via a wireless channel, a “bridge” connection is used, in English Wireless Distribution System (WDS), designed specifically to expand Wi-Fi coverage area.

Understanding Bridged Connectivity (WDS)

When installing this type of connection, the main router operates in standard mode, and the additional one performs the function Wi-Fi booster, receiving and distributing the signal further.

To connect routers in bridge mode, you need to establish a permanent (fixed) communication channel between them and specify the physical addresses of the connected devices in the settings. To set up a “bridge”, both routers are turned on, the main router is configured in advance for the provider, receives and distributes the Internet, and the settings of the additional router are pre-set to the factory settings by pressing the Reset button.

Configuring the main router for WDS mode

We change the automatic broadcast channel selection mode to a fixed channel mode (for example, to the 11th channel).

Installation fixed number channel prevents the router from automatically scanning the air and selecting the least loaded channel. Therefore, if strangers work nearby wireless network, you may have to manually experimentally select the least loaded channel or use special program to search for a free channel. The channel number must be changed simultaneously on both routers - the main and additional ones.

Setting up an additional router for WDS mode

On the main page of the router control panel, the line “WDS Status” should display “working”. This means that the additional router has connected to the main router and is distributing the Internet.

Video: how to make a Wi-Fi network between routers (WDS)

Creating a complex network requires knowledge and experience. If you are confident in your abilities, use our instructions. If you doubt your abilities, it is better to ask for help.

Introduce modern computer, smartphone or tablet without the Internet is extremely difficult. Since the number of devices requiring demon wired connection access to the World Wide Web is increasing every year, it is advisable to take care of convenience and connect a Wi-Fi router. It will not be difficult for you to independently connect the equipment at home to provide wireless Internet access.

Choosing the best place for equipment

Before connecting to apartment Wi-Fi router, you will need to decide on a place in the apartment or house. On at this stage Pay attention to the following characteristics of the room:

• Housing layout
• Location of service provider modem or cables
• Location of the desktop computer (if available)

Depending on the hardware manufacturer, the wireless router may have slow data transfer rates. Also, different models may have different coverage areas. All this must be taken into account when choosing a place in an apartment or house where the device is supposed to be placed. In a particular case, the optimal solution would be to place the router in the central part of the room. If there is a need to install the device as close as possible to the computer to connect to the cable, take this task as a priority.

The signal in the rooms behind the crossbar will be significantly worse than in front of it. You should not fix the equipment without checking the signal quality in different parts of the apartment or house. If the signal quality varies noticeably in different rooms of your home, it is advisable to immediately choose the best place to place the router. When choosing a place to place the router, you should take into account the materials from which the walls are made: brick, expanded clay blocks, foam concrete and aerated concrete and other materials can interfere with the signal.

Video - step-by-step connection:

Connecting the router to a computer (laptop)

Connecting Wi-Fi in an apartment to a computer is easy. The user may experience some difficulties only at the stage of setting up the equipment. Below we will look at how to properly connect a computer via a wireless network, as well as using a network cable. It is worth noting that in the case of a laptop, the procedure will be identical.

It is important to know! Before purchasing equipment, it is worth remembering that modern market offers customers router models without Wi-Fi distribution. Such devices play the role of a kind of adapter.

First of all, you need to connect the wires to the equipment. At this stage, there are no procedural features, since the main market players produce equipment with the same connection diagram.

Here is the sequence of actions in case of connecting the router to a computer:

1. First you need to unpack the device, and then plug the cable into the outlet. The back of the device often contains a power button that you press. The lights came on - you did everything right
2. The sockets are located at the back of the device. On the edge is the socket we need (yellow or blue) and is marked WAN. Connect the wire coming from the equipment to this socket. If you do everything correctly, you should hear a characteristic click.
3. If you need to connect the cable to your computer, you will need to insert it into any empty slot nearby. Next, stretch the cable to the computer’s network card, where you connect it to the appropriate connector. When right actions The light should light up, serving as a signal indicator
4. If interested wireless way connecting the router, you will need to go to the computer settings

To plug wired Internet It’s not difficult, just like getting wireless access to the network.

Wireless router connection

With a laptop connected to wireless Internet There should be no difficulties or controversial issues, and you will most likely be able to achieve the desired result yourself the first time. The laptop is equipped with a built-in module that serves to receive a signal from a Wi-Fi router. In the case of connecting a desktop computer, you need additional actions– purchase of an adapter for accessing the network. You can buy two types of adapters for computers in the store - external and internal. The first equipment option involves the use of a USB cable. The device is placed on the table. Internal adapters require installation on the motherboard via a PCI connector.

Both types of equipment are capable of functioning perfectly, but external adapters may be disconnected and connected to another device. Internal adapter requires a lot free space on the table. The device kit contains drivers and software. After completing the connection procedure to the computer, the device is configured like a laptop. To connect a computer to the device, you need to find a suitable connection from the proposed list, and then enter the password. When you connect for the first time, the equipment may require you to specify settings that were provided by your service provider.

Twisted pair and connection installation

Is it possible to connect a router to a desktop computer? Of course yes! Previously, users had only one method available, which involved using a cord. Later, other options and methods became available with which you can connect your computer to the Internet and your TV to cable channels. And yet, what is needed to connect a computer to a router via cable? Here is the algorithm of actions:

1. First, the service provider wire is connected to the router, for which the WAN socket is used
2. The power cord is inserted into one of the LAN connectors
3. The other end of the cord goes to the Ethernet port
4. A working light serves as a connection indicator

Router won't connect

After completing all the steps, it may happen that there is no connection to the Internet (if active signal wired connection). If the wireless network does not transmit data, but is visible in the list of connections, you should unplug the equipment from the outlet, then wait a few minutes and turn the equipment back on.

Video - Connection from A to Z:

If these steps do not help solve the problem, you will need to check the settings. Right-click on the connection and select the “Network Center” section. Next, click on the connection image and go to the “Details” tab. Are DNS or IPs represented by empty fields? The problem lies with them. Contact the center technical support provider and ask for information to make changes.

Correct settings of the distribution point of your local network will guarantee not only ease of use, but will also protect against possible hacking by hackers. Let's start analyzing the question of how to connect to the router.

First of all, we connect the power cable and the power cord to the required connectors, which you can see in the operating instructions. Please note that one of the connectors is colored blue - this is the external WAN connection, which should be connected to a wire from your ISP. The network cable that is connected to one of the white connectors should be included in our computer.

Since only a network connection can be used to control such equipment, the answer to the question of how to connect to the router via the Internet is obvious - using a web browser.

Login to the web interface

Your PC should already be turned on: launch any web browser and start connecting to the router, for which in the top (search) line enter the numbers 192.168.0.1 (or others, this is indicated in the device manual or on the factory sticker that is on it) . After which we see a similar picture.

By specifying the default login and password written on the bottom side (if this is not a new device or the data has been replaced by someone, then you need to reset all settings by holding the button near the power connector for 6 seconds) you enter the web interface of this device.

Changing the factory administrator password

After that, immediately go to the “ System Tools» – “Password” and change the login and password to your own and click “Save”. Be sure to write them down on paper.

Connecting the router to the Internet

After that, go to the tab “ Quick setup" and select your provider or check the box as indicated below and click "Next".

On the next page of the wizard, you can choose whether to receive settings automatically or enter them manually. What exactly to choose, you need to find out from your provider.

After that, let's find out how to connect to the router via -, for which we go to the “ Wireless mode».

The first thing you will need to do is replace -, which the router will distribute, and turn off broadcasting of this name publicly. To do this, enter the network name and uncheck the box next to “Enable SSID broadcasting”. Don't forget to click "Save" and write down the given name in your notepad.

Now the name of your network will not be visible to third parties: instead, they will see a message that there are some “Other networks”, and without knowing your SSID they simply will not be able to connect to your router, which will increase its security. To connect to the router via -, you also need to specify the encryption type (the “Wireless Security” tab).

Select encryption and set a password

For maximum security and internet speed the best choice– this is WPA2. Enter the password for your wireless network and write it down. Click “Save”.

There is very little left to figure out how to connect to the router. Some models will need to be rebooted for the entered network name and password to take effect. In this case, you need to select “System Tools” and then “Reboot”.

We connect a laptop (gadget) to a Wi-Fi access point

Let's start connecting to the router. Around the clock, left-click on “Other networks” (as you remember, our device does not broadcast its name and is therefore invisible in the list). Click “Connect” and enter the network name.

The site invites you to read the article on connecting the network and the Internet using a WIFI router, we will try to connect WiFi router independently without calling a specialist to your home. There are two types of routers - without Wi-Fi and with it, let's try to configure our computer and router to use a wireless network.

And so we have a router in stock, no matter what manufacturer your router is, the principle of connecting WiFi routers in most cases is the same for different models. Now almost every house and apartment has a device that supports WIFi connection, laptops, phones, TVs, smartphones, tablets, gaming consoles and printers.

How can you connect the Internet yourself through a router, and organize a rough diagram of how the Internet works at home? All we need is a communication channel that comes to your home using a regular network cable, or coaxial cable(in the form of an antenna). IN this review We will look at directly connecting a computer and laptop to an access point. Now let's take a closer look at the WiFi router itself and what it is. They may look different in appearance, but back panel has the same outputs and connectors.

And this is how we see the connection interface incoming internet, as well as a couple of interfaces for organizing an internal network using cables. The incoming Internet can be a regular network cable, or a telephone cable if you have an xDSL connection. In addition, there are also USB modems, but they are rare.

To connect a computer to a WIFI router, we need a wired network cable (Patch Cord). Even if your desktop computer has built-in Wi-Fi, it is recommended to connect using a cable. This is the fastest connection method, providing a reliable connection between your computer and the router. If your router is still located far from the computer, you can connect it via WiFi, but I recommend using a cable. Since you will not carry the system unit with you like a phone or laptop, it would be more advisable to use a cable. The patch cord usually comes with any WiFi router and looks like this:

In addition to the computer, a cable can be used to connect a TV and other devices that require a more stable connection to your router. You can, of course, use a WiFi connection, it’s just that a wired connection is initially designed for higher bandwidth. The cable is plugged into one of the free ports on the router LAN1 or LAN2, etc., and the second end of the cable is inserted into the system unit as in the figure:

Next, we wait until the access point gives our computer a network address, and go to the router to configure it directly. Usually network address for a router it looks like 192.168.0.1 or 192.168.1.1. This address is specified in the router instructions. If you entered the address correctly, a window will appear asking you to enter your name and password for authorization. The password and login are also indicated in the instructions. If they suddenly don't fit, you can use Reset button and reboot the WiFi router.

Let's say you get into the modem interface, all that remains is to check and configure the type of your Internet connection.

1) If you have static settings network connection then you need to transfer these settings to the router settings:

The first thing you will need to do is replace -, which the router will distribute, and turn off broadcasting of this name publicly. To do this, enter the network name and uncheck the box next to “Enable SSID broadcasting”. Don't forget to click "Save" and write down the given name in your notepad.

Now the name of your network will not be visible to third parties: instead, they will see a message that there are some “Other networks”, and without knowing your SSID they simply will not be able to connect to your router, which will increase its security. To connect to the router via -, you also need to specify the encryption type (the “Wireless Security” tab).

Select encryption and set a password

For maximum security and internet speed, the best choice is WPA2. Enter the password for your wireless network and write it down. Click “Save”.

There is very little left to figure out how to connect to the router. Some models will need to be rebooted for the entered network name and password to take effect. In this case, you need to select “System Tools” and then “Reboot”.

As soon as the user, in addition to the computer, begins to use another gadget for use world wide web, then he immediately faces the problem of providing him with Internet access without incurring additional communication costs. But, more often than not, there are even more than a few home devices with the function of surfing the global network. For optimal solution The problem, as a rule, is the device that distributes the Internet, i.e., routing it to all the computers and gadgets available at home.

However, simply purchasing this device in a store will not solve the problem, but you also need to know how to properly connect the router. Below in simple words with pictures there is a detailed description of all the steps, how to connect the router to a computer using Wi-Fi or a “patch cord” cable for the router, as well as how to correctly connect a wireless router so that everything works well later, and as people say - it became Wi-Fi , having done accessible internet where it is needed.

In order to eliminate frequently encountered difficulties, at the end there is a guide on how to correctly connect a router to a router and configure them. The instructions presented are equally applicable to any models of wireless and wired access points.

The essence of the device

Before proceeding directly to the issue of connecting the device, you need to know the basic principle of its operation. Advanced users can simply skip this section of the guide and move straight to the next one.

A router is a device that independently connects to the global network using the parameters entered into its interface; in fact, this small-sized device acts as a computer, but with a routing function, so the router can distribute the Internet to many devices via Wi-Fi or cables.

Only the router itself is physically connected to the worldwide network; the router is assigned a specific IP address. Therefore, you will not need to pay additionally for many computers or smartphones connected to it, of course, if no additional services have been purchased.

Connection procedure

The router itself is very simple, and it is not necessary to have a significant amount of knowledge for this. On the body of all routers there is a special “Internet” socket, where you need to connect a wire from your communication service provider (this connector is called “WAN”).

Next to it are the “LAN” connectors; it is to one of them that you need to connect a patch cord to the network card of your PC or laptop. And also through these ports wired communication with various set-top boxes, Smart TV, additional computers etc., which also play an important role for the home.

Now let’s look at the question posed step by step, how to connect the router. You only need to perform a few sequential steps:

1. Insert the wire from the provider into the “WAN” connector;
2. Using the supplied wire, establish a connection between any of the router’s “LAN” connectors and the same slot on the PC’s network card;
3. Supply electricity to the device through the supplied adapter, connecting it to a 220 V network. Then, if available, press the “On” key. activate the device on the router case (the special indicators on its case will light up);
4. Ready! The router is connected. All that remains is to enter the necessary settings.

It is possible to connect the router for further configuration without having a cable connection to the PC, but by connecting to it via Wi-Fi. But this is a less reliable method. Especially when this is done by a beginner, after entering the parameters, having already connected again, malfunctions often appear. Of course, they can be quickly eliminated, but if the owner of the device is insufficiently experienced, correcting them will require a significant investment of nerves and time. Therefore, it is strongly recommended to use a wired connection to enter settings.

Procedure for connecting an ADSL router

The principle of operation is completely similar to the algorithm described in the previous section of this manual, but this router does not have a WAN port and is replaced by a connector called “Line”. After connecting, you can immediately begin entering the ADSL Wi-Fi router settings.

How to connect a router to a router?

If you need to cover a large area with wireless signal coverage, for example, in the case of a large apartment or house, then this is effectively done by connecting router to router. This is guaranteed to increase the Wi-Fi coverage radius.

This can be shown schematically as follows:

In total, there are 2 main methods for achieving the task:

1. Using cable;
2. Via Wi-Fi.

1 method: Wired

You will need a cable called twisted pair cable that is long enough to connect 2 routers to each other.

To connect, you must perform the following steps:

1. Install one end of the wire into the “LAN” socket of the router connected to the global network;
2. Insert the other cable plug into the “WAN” connector of the 2nd router;
3. Next, enter the settings in the 1st router to configure it for the Internet provider, and in the 2nd router for dynamic ip.

Method 2: via Wi-Fi

If it is not possible to stretch the wire between the devices (which is extremely common), then you will have to use the second method, which is characterized by the complexity of the settings, so we will pay more attention to it in this guide.

The user has access to a router with access to the global web (let’s call this router “1st”) and another device for use as a repeater – “2nd”.

At the first stage, you need to connect “1st” to the PC and configure the Internet on it. Then connect the “2nd” to the PC and configure the connection to the access point.

The algorithm of actions includes the following sequential steps (given for the Windows 7 operating system, but the algorithm is completely similar, with minor changes, for other versions of Windows):

Recently, more and more subscribers of Internet providers are puzzled by the question; how to connect and configure a router using an existing router; with or without WiFi?! For what? There may be several events. 1st and most common reason; The WiFi coverage area of ​​the existing device is not enough for the entire apartment or house and it needs to be expanded somehow. The second reason; saving money. Let’s say one person has connected the Internet and the tariff is 100 Mbit. And his friend lives next door. And so they decide to use the same Internet channel together, both want to have a wireless network. Another reason; When you connect to your provider, you have already been given an access device: a modem or an optical terminal, but its functionality is lacking. Connecting another one to the existing wireless router will help them with this. In this article I will tell you how to do this more correctly and give two ways to set up a router-to-router network: via WiFi and via cable.

Method 1. Connect via WiFi.

This method, in my opinion, is more correct; one device simply extends the WiFi coverage of another. In general, at first there was simply a repeater mode, which was either supported or not. Later appeared new development; WDS, which manufacturers of wireless devices have begun to actively implement in their creations.
WDS (Wireless Distribution System) is a special development that allows you to expand the coverage area of ​​a Wi-Fi wireless network by combining several access points (or several WiFi routers) into one network without the need for wired connection between them. The main requirement when organizing such a network is; all base stations WDS networks must be configured to implement the same frequency, encryption method, and encryption key.
As a result, in order to connect the router via WiFi, the first one should simply distribute the wireless network and no additional options there is no need to do it on it. And the second one must be able to work in repeater mode, or support WDS technology, which is practically the same thing. To know; can your device do this? You can either go to the manufacturer’s website or go through the settings. As an example, I'll look at two wireless routers that can be connected to others via WiFi. 1st; Asus RT-N12 D1, which can work as a repeater. And the 2nd example; TP-Link supporting WDS technology (TL-W741ND, TL-W841ND, TL-W941ND, TL-W1043ND).

Connecting an Asus router to a network via WiFi

In order to switch Asus into repeater mode, you need to go to the web interface, find the Administration section; and on the Operating mode tab; check the Repeater mode box:

This is a list of available wireless networks. You need to find an existing network, enter the network key (password) and click the Connect button;. After this, Asus must connect to the network, obtain an address and expand its coverage area.

Connecting a TP-Link router via WiFi

Most modern TP-Link models have WDS support. In order to configure the connection of 1 router through another, you first need to go to the Wireless Settings section of the web interface; and check the box Enable WDS;:

Some more options below will become available to you. Click the Search button and see a list of Wi-Fi wireless networks available for connection:

We find ours among them and press the Connect button;. After this, you will be taken back to the Wi-Fi functions, where you will need to enter the network password and click the Save button. After this, TP-Link will connect to the 2nd access point as a repeater and expand its wireless network coverage area.

Method 2. Connect via LAN cable.

The router-to-router method of creating a wired network will suit you if the distance between them is more than 30 meters. There are 2 options for connecting routers with a network patch cord:

; Option 1. Connect the LAN port of the 1st device and the WAN port of another. The second device will work as a regular client of the first one and will have its own separate WiFi network. With all this, it is important to connect the devices to each other correctly. The ports must be connected as shown in the photo:

In other words, you must connect one of the LAN ports of the first device, into which the provider cable comes, with the Internet (or WAN) port of the second. I would not recommend connecting them via LAN ports (although I discussed this option below), since this is not entirely correct. After this, you still need to configure everything correctly. On the first router, in principle, you don’t need to do anything. The only thing; Check that the DHCP server is enabled in the LAN section. On the second; You need to go to the WAN section and select the Connection Type; ; Dynamic IP; (WAN Connection Type; Dynamic IP):

After this, you will need to configure the WiFi network in the usual way, save the functions and reboot the device. After which, the second device must obtain an IP address from the network of the first one and work as one of its clients, distributing what it has already acquired to its clients.
By the way, on some WiFi routers the connection type is; Dynamic IP; used by default, at industrial settings. These include devices from D-Link:

Here, to connect it to another, you just need to connect the cable and set up the Wi-Fi network.

; Option 2. Connect the LAN port of the 1st device and the LAN port of the other. In this case, both devices will logically be located in the same sector of the network. With all this, the wireless networks of both routers will have related addressing, but different network names; SSID Setup: First, you need to disable the DHCP server on the second device:

Later, if they have the same IP address on the local network, then it is necessary to change it on the second device to another one so that there is no conflict:

The second router must either be assigned an IP address in the same subnet, but somewhere at the end of the range; for example, 253rd or 254th address. Or change the subnet altogether to 192.168.2.x for example. Don't forget to save the features.

I have listed the more optimal, in my opinion, methods for the connection function. If you have any other ways to organize a network via cable or WiFi between routers; write in the comments.