How to remove the password on Windows 7 if you forgot. If you suddenly forgot your Windows password: Break the password! What do we need for this?


A password is the basis for the security of any system and helps to lock your computer from third parties intending to use it. By neglecting safety, you consciously take upon yourself all the possible consequences of your actions. It often happens that it becomes too annoying to enter a password, especially when you are the only owner of the computer. So how to remove the password when logging into Windows 7?

Before removing it, let's take a look at the advantages of such a system.

To achieve the desired result, you do not necessarily need to remove your password set for your account; there is the option to create a new account.

Thanks to these actions, you will be able to:

  1. Be protected from unwanted computer use;
  2. Log in to an unsecured account;
  3. Protect your PC from the harmful actions of some viruses that cannot be executed without the required level of access.

Such an alternative exists, and in this article we will briefly consider it; read in more detail in the next publication. But first, we will perform actions related to the immediate topic of the article. To achieve the desired result, you will need access as an administrator and, of course, a password for recording during the procedure.

Disable Windows 7 login password requirement

1. Open the “Run” line, this is where administrator rights come in handy, without them you will not gain access, press Win + R;

3. You will be taken to the “User Accounts” window, below are all previously created user accounts, select the one you need and uncheck the “Require username and password” checkbox;

4. After this, apply the specified changes, you will be asked to enter the old password to confirm these actions.

There is also another method, it is almost identical to the previous one, except that it does not require you to use the command line to find the account settings window.

The method also differs in that you do not remove the requirement to enter a password before starting the system, but remove the password, thereby removing the need to ask for it.

How to remove a password?

The starting requirements are the same, access to the administrator account and the password for the desired account.

1. The most accessible way to get to the desired menu is to click on the picture indicating your avatar. In your current account, to do this, open “Start” and click on the picture, go straight to step 3;

2. This point has a right to life, because in some versions of themes used from third-party developers there is no such window, you should follow a different path:

  • Click on the Windows sign in the lower left corner, “Start” should open, select the “Control Panel” option;
  • Find, often at the bottom, “User Accounts” and click on it.

3. Go to the “Delete your password” tab;

4. Enter it in the empty line and click “Remove password”;

Another option similar to this could be: instead of deleting the code (point 3), go to “Change your password”, enter the outdated password, and leave the space for the new one empty, so there will simply be no password.

Sometimes the option does not work completely; the computer still asks you for a password when you log in, but allows you to access your account by simply pressing Enter, without a password. If you have such a problem, then use the first method by disabling the Windows feature that requires a password when logging in.

Creating a Windows 7 Account

1. Open the account settings menu as we just did and click “Manage another account”;

2. You will see a window with accounts that already exist, and at the bottom is the “Create an account” button, which is what you need;

3. 2 parameters are required: name and type, regular or administrator access;

4. After everything, click “Create an account” and you can use it.

Now, if you click the button that is located slightly to the left of “Shut down” in the “Start” menu, you will see a list of possible options for stopping the system; you need to click “Change user” and switch between them if necessary. When you start your computer, you can immediately go to the newly created entry.

On our website we already have a description of many functions that are relevant and useful for the user, based on this we will not dwell on this, but it is important to understand the differences between all methods. In the first case, you completely remove the password, in the second, you set an empty one, and in the third, you simply create a new account without a password, and leave the Administrator protected.

You need to understand that the most important system commands can only be executed on behalf of the Administrator.

However, you can create another account with administrator rights, so they will have equal rights to access and edit content. Be careful and do not give them without the proper level of trust, because this will make your computer more vulnerable.


If you still have questions on the topic “How to remove the password when logging intoWindows7?”, then you can ask them in the comments


You can use the command netplwiz, inscribed in the line of the “Run” utility. To enter there directly”, press the keyboard shortcut Win+F.

Hello everyone, on the blog there is a topic about correcting your mistake when installing Windows 7 OS. Yes, I think so, because sometimes with our ignorance we complicate our lives. As in this case with assigning a password when installing Windows.

So we need to follow the path: Start - Run and enter the above command and click OK. But in some builds of windouws 7 it is not so easy to find, but you need to follow the Start button further: All programs - Standard - Run - netplwiz.

A window like this should appear on your desktop:

Now after a reboot, when you log in, the computer will no longer require you to enter a password. But if you block for something using a keyboard shortcut Win+L, then as a result you will have to remember your password again and enter it in the login line.

Therefore, to avoid such “hemorrhoids”, remove it completely. To do this, we follow the path: Start - Control Panel - User Accounts - Delete (change) your account password.

By selecting the “Delete your password” item, we find ourselves in the next window where we confirm that we want to delete the current password.

Removing the password when logging into Windows 7 is quite simple. This will require a minimum amount of time and knowledge. This kind of operation usually takes no more than a couple of minutes.

This can be done in various ways: through a special console, command line, or by resetting key data from SAM. Each method has both its advantages and disadvantages.

Why set a password

It often happens that some important and confidential data is stored on the PC, access to which should be limited. Microsoft Windows makes it possible to easily limit the circle of people who have access to files on your computer by installing a special key. Each person can have his own if there are several users.

An access code is also required to protect information on the PC to different owners from each other. For example, this is often necessary for parents so that curious children are not able to get acquainted with some information that they are not entitled to.

Removing the password through the “Run” console

One of the easiest ways to disable entering an access key on the OS is by using the “Run” item. Accessing it is quite simple - just click on the “Start” button. Most often, the item in question is present on the right side of the window that opens.

Entering a command

To disable the function in question, you must enter a specific command. It will open a special applet that allows you to do this.

The process of entering the command is as follows:

  • open the Start button menu;
  • click on the “Run” item;
  • In the field that opens, write “control userpassword2”.

After completing these operations, a window called “User Accounts” will open.

It contains two tabs:

  • "Users";
  • "Additionally".

You need to focus your attention on the first tab. Since this is where all account settings are made, including changing the login, access key and other attributes. In addition, if desired, you can easily add new accounts or delete old ones.

Disabling the password

To disable Password, just open the corresponding window (“accounts” -> “users”). In it, you need to uncheck the box called “Require username and...”. In this simple way you can disable the need to enter Password.

Confirming the user

You can also completely disable the Microsoft Windows login window.

To do this, you need to do the following:

  • in the window called “Accounts”, double-click on the desired line (admin, user or something else);
  • click “OK”.

A window will open containing three fields. Only the top one should be filled in; login is written there. The rest remain empty. After that, click on “OK” again. After performing these operations, when starting Microsoft Windows, there will be no need for Password. Which is quite convenient if only one person has physical access to the PC.

video: Password reset

Removing the password when starting Windows without programs

Also, Password in the operating system in question can be unstuck without using the “Run” item, as well as various third-party applications. To do this, just use a special command line. In this way, you can avoid having to enter Password when you turn on the computer, as well as when it comes out of sleep mode.

Command line setup

In order to configure the command line, you need to use the Windows distribution disk. This method of setting up and resetting the access code is suitable if it is forgotten and it is not possible to start the OS otherwise.

First of all, you need to install it through the BIOS to boot from a CD or other device containing the distribution. After this, you should reboot and start the installation.

After this, the following actions are performed:


  1. CmdLine – enter cmd.exe;
  2. SetupType – replace parameter 0 with 2;
  • select section 999 and click “Unload hive”;
  • extract the distribution package and reboot the PC.

Resetting your password and login

After loading the operating system, the user will immediately see the command line window. To reset the password, you must enter the following command: net user username

Photo: Net user username_new_password

If for some reason User has forgotten the account name, then you can simply write net user without parameters. This will allow you to display all available items and select the one you need.

If the new Password is not intended to be used, then it is sufficient to leave the field blank.

If you need to enter a new one, the command will look like this: disk name:\Windows\system32\net user user_name new-key.

It is also often necessary to create a new account without an access key.

To do this, you need to run the following commands in strict order:


These commands perform the following operations in strict order:

  1. creating a new User;
  2. adding it to the Administrator workgroup;
  3. removal from the Users group.

The reset method in question is quite complicated, but quite feasible even for not very experienced PC owners.

Method for resetting key data from SAM file

There are a huge number of different ways to reset your login code. But all of them only change in various ways the information stored in a special file called SAM. It is used by the OS to store data related to both User and Password. This abbreviation name stands for Security Account Manager.

The file in question does not have an extension, since it simply does not require one. It is a direct part of the registry, located in the directory systemroot\system32\config. Also, a copy of the file in question is available on the emergency recovery disk, if for some reason this function was not disabled earlier.

Editing this file to change the operating system login parameters is the most difficult way. To work with SAM, you need specialized software from third-party developers. All operations with SAM must be performed with the utmost care and precision.

How it works

The most popular application for changing data in the SAM file is active password changer. Before you start, you need to copy the application to some media or other FAT32 hard drive.

After performing this operation you must:

  1. run the password file from the folder "BootableDiskCreator";
  2. in the window that opens, select "Add USB...";
  3. activate the button "Start".

After completing all the above steps, a bootable USB flash drive will be created.

The process of changing data using the application in question is as follows:


This method of working with accounts and their attributes is as secure as possible. Since it allows you to avoid editing the registry and other manual operations. This can sometimes be difficult for not very experienced users who started working with their PC relatively recently. The likelihood of harming the operating system in this case is practically zero.

Another important advantage of this program is the ability to set a schedule for PC use by individual accounts.

The disadvantages include the fact that some older motherboard models do not support launching from a USB drive. In such a situation, you have to look for some alternative options: a floppy disk, a CD, or something else.

Quite often, especially with beginners, situations arise when the combination of characters required to enter the OS is forgotten or lost for other reasons. There are many ways out of such a difficult situation; reinstalling the system is not always required. Moreover, any computer owner who has minimal skills in interacting with this type of equipment can cope with resetting the OS access code.

Many users are asked the question: how can you remove the password on Windows 7, 8, 10? Some people think that they don’t need it. For some people it’s completely annoying or trivial, they forgot the password for their account and now they can’t log in to the system. It turns out there are a lot of reasons why people want to reset their Windows password or completely remove it. Therefore, we decided in this article to show you various options on how to reset or bypass your login password on various Windows operating systems.

A way to remove the password on Windows 10, 8, 8.1 during startup or locking of the PC

This option is simple and fast, and does not require much computer knowledge. Here you just need to uncheck one box and that’s it. So let's start reviewing.

  • First, let's open the window " Execute" Press keyboard shortcuts " Win And R».
  • We write in the box “ netplwiz", click " OK».
  • You will be taken to the section " user accounts", uncheck the box here " Require name entry..." Click " OK».
  • The system will ask for a password to confirm your actions, enter it twice.
  • Be sure to reboot the PC. Done, let’s check if we succeeded, if not, move on to another method, which is described below.

Please note: you cannot remove the password this way on Windows 7, but you can bypass it on Windows 10, 8.

How to remove or change your local password

Usually, when logging into the system, a local account is initially used, for which you will need to enter a key. You can easily change it or delete it, we’ll show you how to do it now:

  • We log in to the panel where you can manage all accounts. Press the keys " Win – R", copy and paste the command " netplwiz».
  • Next, you will see that in the panel that appears, it is written how to change the password: press and hold “ CTRL with ALT and DEL" A blue screen will pop up where you will need to select the line “ Change password».
  • We drive in the key that is currently relevant. Flood we register a new key with which we want to replace it. If you want the system to start when you log in without asking for a key, then enter one valid key and leave the other fields blank. Click " Enter».

It is not necessary to restart the computer. That's all, now your computer will start with a new password or without it at all. It all depends on what you wrote in the lines.

Resetting a password that you forgot

Often, many users, in pursuit of the security of their PC, come up with complex keys. It would be good if they wrote it down somewhere, but what if not? Then there is only one way, either you throw it off or restore it. Now we will show you methods on how to reset your password in Windows 10, 8, 8.1.

Resetting the code from a Microsoft account

To reset the key, it will be most convenient to contact the Microsoft online service. The company took care of the users and created a service where you can reset the code in case you forget it. Therefore, let’s move on to consider the method:

Resetting the local account password in Windows 7

On Windows 7, unlike other operating systems, there is one local account, which is in no way tied to the World Wide Web. Therefore, if you suddenly forget, you won’t be able to reset it using the Internet. Let's consider another option, in which you must have access to the system.

  • Click on " Search in Windows", enter the command " cmd" Right-click on the black window and select Run as Administrator.
  • To enter a new key, enter the command “”, for example net user xxx 336699.
  • To reset, enter another command “ Net user (account name)’’’’».

Now we try to log in by entering a new key. Or without a key, if you decide to reset it in Windows 7. Unfortunately, the method will not help everyone, but it’s worth a try.

Resetting the password on Windows 7

Due to the fact that you do not have access to your system at all, you will need an installation disk, a flash drive with any Windows operating system (7,8,10). If such media is available, we now proceed to step-by-step actions:

  • Let's boot from our installation media. Click on the line “ System Restore».
  • From the list, click on “ Command line" A black window will pop up called the command line.
  • Enter the command " copy c:\windows\system32\sethc.exe c:\", click on " Enter" Thanks to this command, a backup copy will be created, which is responsible for sticky buttons in Windows on the root of drive C.
  • Replace " seth.exe"in the System32 folder to the file " cmd.exe», « copy c:\windows\system32\cmd.exe c:\windows\system32\sethc.exe».
  • We reboot the PC, press the ““ button many times Shift", the command line will pop up. Changing the code " Net user (account name) (new password)» .

In more detail, how to do this in Windows 7, thanks to the command line, is described above in the article.

Bypass the administrator password using the registry on Windows 10

Let's try the password bypass method through the registry. It is simple and does not require additional downloads and installations of software.

  • Press the buttons " Win And R", in the window we enter the command " regedit».
  • To appear " Registry Editor"where it will be necessary to open " HKEY_LOCAL_MACHINE", Further " Software", then we look for " Microsoft», « Windows NT», « CurrentVersion" and click on " Winlogon».
  • Now in the center we find the file “ AutoAdminLogon", move the cursor over it and double-click with the mouse. In line " Meaning» enter the number 1 , « OK».
  • Changing the file " DefaultDomainName", we also open it and change it in the paragraph " Meaning" to the name of the local computer. You can view this name by right-clicking on the shortcut “ My computer», « Property».
  • If necessary, you can change it in " DefaultDomainName» to any other login.
  • We reboot. After completing the steps, all that remains is to check whether it worked or not.

Resetting your password using the Dism++ program on Windows 10

This is a multifunctional, free utility. Thanks to Dism++, it is possible to remove the local password on Windows 10, as well as clean the entire system of unnecessary garbage. We will now show you how to implement this:

  • Make a boot disk on any other PC or a flash drive and unpack the archive with the Dism++ application there.
  • Boot from this bootable media on the PC where you want to reset the password. Press the key combination " Shift And F10" in the installation application. Specify the path to our Dism++ program on the command line ( for example: F:\dism\dism++x64.exe). To accurately determine which letter the flash drive has, use the following commands one by one: diskpart, list volume, exit(command number two will show which partitions are connected, as well as their current letters).
  • The window “ Dism++ License Agreement", click " Accept».
  • The application will open, where you need to select “ Windows 10...", Further " Open session».
  • Let's go " Tools», « Additionally», « Accounts" In the window that appears, click on the user who needs to reset the password. Click " Password reset».

Everything is ready, you can close everything, and start the computer as you always do. That's all, we figured out how to remove the password in Windows 10. Read also the article about how this might be useful to you.

We bypass the administrator key in Windows 10.

This method is for more experienced users; it requires a boot disk; an option with a flash drive is possible.

  • We launch from a disk or flash drive, click “ Recovery».
  • The next step is to select " Diagnostics», « Additionally», « Command line».
  • Enter the command " copy D:\Windows\system32\cmd.exe D:\Windows\system32\sethc.exe /Y" Disk " D" which is specified in the command, this can be any disk other than the system one.
  • You will see alerts " File copied: 1" We're going to reboot.

Passwords help protect your account in operating systems from unauthorized users. However, it also happens that they are forgotten, and it is not possible to get into the system from an administrator account, and you don’t have the installation media with you. In this case, you will have to reset the password using slightly non-standard methods.

Removing the password from Windows 7 without installation media

If you are unable to download a password reset disk for Windows 7, you can use one of the methods suggested below. Both involve solving the problem using system utilities. To do this, you do not need to download a Windows 7 password reset disk or a full system image. However, it is recommended to strictly follow the instructions, since both methods involve working with the interface "Consoles".

There is no need to try to reset your Windows 7 password using third-party software, as this will lead to certain problems.

Method 1: Command Line

This is the most universal, simple and secure way to change your Windows 7 password without knowing the old one. If necessary, you can later simply remove the new password from the operating system. To perform this method, you will need to be able to log into the OS interface, even from a guest account. Usually this is always there by default.

The Guest account has some limitations compared to the Administrator account. By default, they apply to making any changes to the OS, for example, installing/uninstalling programs, editing some documents, downloading content from the network. Restrictions on use "Command line" no by default.

The instructions for this method are as follows:

    1. Press the key combination Win+R.
    2. In the line that opens, enter cmd and click Enter.


    1. Will start "Command line". First, you need to find out the number of users, their powers and logins in the operating system. To do this, enter the command net user and click Enter.


    1. A list of all operating system users is displayed. You need to find the administrator account login. This will be easy to do if there are only two accounts in the OS.
    2. Now write the command net user administrator_login new_password. Example command: net user Admin 123456. Press Enter.


  1. After applying the command, restart your computer and log into the administrator account with a new password.

Method 2: Recovery Menu

This method can be dangerous, as it involves disconnecting the computer from power while it is running. However, a single use should not cause much harm.

The bottom line is this:

    1. Restart your computer if it was turned on or turn it on if it was turned off.
    2. When Windows starts loading, turn it off abruptly. For example, press the power button or unplug the power cable.
    3. Then reconnect the power and turn on the PC.
    4. Instead of the standard Windows startup, the screen should start "Windows Error Recovery", that is, recovery from an error.
    5. You will be offered several options for starting the operating system. Select "Launch Startup Repair". In the Russian version it may be called "Run boot repair".


    1. The system will begin loading. You may see a window asking for permission to perform a system restore procedure ( "System Restore"). Cancel by clicking on "Cancel".


    1. A recovery error message appears. Click on the item "View problem details".


    1. A text file describing the problem will open. Here you need to click on the item "File" in the top menu. From the drop-down list, click on the item "Open".


  1. Will open "Conductor" Windows with access to all system files. You need to go to the following path: C:\Windows\System32.
  2. Here, find and rename one of these files utilman.exe or sethc.exe, adding the postscript bak or old to the name of one of them. If these files are not displayed in Explorer, then in the column "File Type" set the value "All files".
  3. Now find the cmd.exe file. Copy it and paste it in the same directory.
  4. Rename the copied file to "utilman" or "sethc". No need to rename the file to "utilman", if in step 10 you added a postscript to the file "sethc" and vice versa.
  5. You can close "Notebook" and press "Finish". After this, the system will reboot.
  6. Wait for the Windows start screen to load and click on the icon "Special abilities", if you renamed the file to "utilman". If you renamed it to "sethc", then you will need to press the key five times Shift.

This way you will have access to "Command line" without having any access to the system. In the interface "Consoles" you will have to do the following:

    1. If you do not know the exact name of the administrator account, then enter the command net user. It will display all data regarding system users, including their status.


    1. Now write this command: net user Administrator account name new password. Example command, net user Admin 123456. Press Enter.


  1. Restart your computer and try logging in with the new password you set.

The methods discussed above help you reset your password on Windows 7 without using a disk with an OS image. However, it is recommended to create a system recovery image on a flash drive (installation disk) and perform a reset through it.


2024 gtavrl.ru.