How to remove a password on a laptop. How to remove or reset a password on a computer or laptop


Almost always our electronic devices are password protected. Often we do this just in case, just in case. After all, why do this if your PC or laptop is used only at home, with loved ones, or in the office, when no one has access to it? Let's say you decide not to burden yourself with remembering complex combinations of symbols and numbers. The question arises: how to remove the password from the computer when turning it on? First, we take the code from the administration and the password reset disk.

What is the administrator password and how to remove it

When you turn on your computer or laptop for the first time, each user is asked to come up with and enter a security code. We do this and write it down somewhere so that next time we can log into our device. This combination is the administrator code. Now let's look at how to remove the password. To do this, we launch the operating system and find ourselves in it as an administrator. We go along the following path: “Start”, “Control Panel”, “User Accounts”. Click on the last logo and in front of us is the administrator account. To the left of the image is the “Delete your password” tab. You'll have to enter it again. And that's it, it's done.

Removing user account passwords and user accounts themselves

To clear the codes of other accounts, click on “Manage another account”. Then we find the one we need in their list and do as in the previous case: to the left of the image there is the inscription “Deleting your password”. Click on it and enter the code from this account, not the administrator. It is done. So we figured out how to remove the password from your computer when you turn it on. If you have many accounts and you do not want to write different combinations when turning on the device, evaluate the need for these entries and delete all unnecessary ones. To do this, after “User Accounts”, go to “Manage Account” and click on the desired one, and then on “Delete Account”. After which the system will ask whether this user’s files need to be saved on the computer. If not, delete them; if you need them, then select the “Saving Files” tab. To complete the operation, you must confirm it. There is also a standard account called “Guest”. It is not recommended to remove it, but you can enable it or disable it completely. When disabled, only the administrator profile will remain and, of course, the question of how to remove the password from the computer when turning it on will disappear. In the case when you have removed it, the device will always be turned on without additional manipulations.

Creating a password reset disk

It also happens that you forgot your password. To prevent this from becoming a big problem, users create a password reset disk. Using it, you can easily reset and log in. How to do it? Simple enough. You need a flash drive with a minimum of free space; the information on it will not interfere or be damaged. Consider the following factors: the disk must be made for all accounts; if you create several flash drives, only the last one will work; When changing the password, there is no need to create a new disk; the old one will function. Now about the process itself. In “Start”, click on the photo of your account and insert the external memory into the device. Select “Create a password reset disk”, a new window will open, click “Next”. Select your flash drive, enter your account code and click “Next”. The process itself will begin, during which you will need to click “Next” again, and then “Finish”. All! The file userkey.psw appeared in the external memory, which is responsible for the reset operation.

How to remove the password from your computer when you turn it on using a reset disk

Something you have been afraid of for a long time has happened. When you turn on the computer, you need to enter a code, but it is lost and the memory is empty. What to do? And then you remember that not long ago you secured yourself by creating a flash drive with a reset password. Find it and try to log in without entering the code. A button appears that says “Reset Password.” Click on it and insert the saving flash drive. If you want to have a new password to log into the system, enter it twice and a hint; if you don’t want it, just click “Next.” That's it, the code is reset. In fact, it is recommended to have a password when you turn on your computer. So keep it well or memorize it.

fb.ru

How to remove a password from a computer on Windows 8

Many users are interested in how to remove the password from a computer or laptop on Windows 8. In fact, it is not at all difficult, especially if you remember the login combination. But there are times when a user simply forgot the password for his account and cannot log in. So what should we do? Even from such seemingly difficult situations there is a way out, which we will talk about in our article.

See also: How to set a password in Windows 8

Remove password if you remember it

If you remember your password to log into your account, then you should not have any problems resetting your password. In this case, there are several options for how to disable the password request when logging into a user account on a laptop; at the same time, we’ll look at how to remove the password for a Microsoft user.

Reset local password

Method 1: Disable password entry in “Settings”


Ready! Now you won't have to enter anything every time you log in.

Method 2: Reset your password using the Run window


Thus, we did not remove the password, but simply set up automatic login. That is, every time you log in, your account information will be requested, but it will be entered automatically and you won’t even notice it.

Disable your Microsoft account


Ready! Now re-login using your new account and you will no longer need to enter your password and log into your Microsoft account.

Reset your password if you have forgotten it

If the user has forgotten the password, then everything becomes more difficult. And if in the case when you used a Microsoft account when logging in, everything is not so bad, then many users may have difficulties resetting their local account password.

Reset local password

The main problem with this method is that this is the only solution to the problem and for it you need to have a bootable USB flash drive of your operating system, and in our case - Windows 8. And if you do have it, then this is great and you can start restoring access to the system.

Attention! This method is not recommended by Microsoft, so you do everything you do at your own risk. You will also lose all personal information that was stored on the computer. Essentially, we will simply roll back the system to its original state


You can now log in to your new user account using your new password. Of course, this method is not easy, but users who have already encountered the console before should not have any problems.

Microsoft password reset

Attention! This method of solving the problem requires an additional device from which you can access the Microsoft website.


Now, using the combination you just created, you can sign in to your Microsoft account on your computer.

We looked at 5 different ways to remove or reset your password in Windows 8 and 8.1. Now, if you have problems logging into your account, you will not be confused and will know what to do. Share this information with your friends and acquaintances, because not many people know what to do when a user has forgotten their password or is simply tired of entering it every time they log in.

We are glad that we were able to help you solve the problem.

Poll: did this article help you?

Not really

lumpics.ru

How to remove the BIOS password from a laptop

Users set a password on the BIOS in order to protect their computer from unauthorized access. Setting a password is not difficult, and it will provide reliable protection, but if the password is set accidentally and it is safely forgotten, then difficulties may arise with recovery. Unlike desktop PCs, passwords on laptops are stored in non-volatile memory. To get a positive result, we follow the instructions.

There may be several ways to reset the BIOS password. It all depends on the laptop manufacturer. On many budget and mass-produced models (TOSHIBA, ASUS, ACER, HP, SAMSUNG, etc.), resetting the BIOS password is a fairly simple operation. First of all, you need to study the documentation for the laptop. Consider whether there is a jumper on its motherboard. The jumper contacts are usually labeled CMOS, which is located next to the battery.

Turn off the laptop completely, find the jumper on the board, and connect the second pair of contacts with a jumper. After 10-15 seconds, return the jumper to its place. Instead of a jumper, some models may simply have a pair of contacts. Short them for a few seconds with any metal object. After this, the BIOS settings will be reset to factory settings.

Turn on your laptop. It won't boot, but the CMOS settings are reset. A message may appear on the screen asking you to press the “F1” key, this should be done to set the BIOS parameters. After that, select “Save and exit”. Now the OS will continue loading without asking for a BIOS password.

If the jumper is not found or it is not provided by the motherboard manufacturer, you can use another method. Pry the CMOS battery with something sharp and remove it for a while. Sometimes 5-10 minutes are enough for the BIOS to be reset, but it is better to increase the time to several hours. This operation must be performed when the laptop is completely turned off; it is better to remove the battery.

On expensive laptop models, information security techniques may be more complex and reliable. On such motherboards, it is almost impossible to crack the BIOS or OS boot password. But you can try by using a software method to reset the BIOS password. Log in to the operating system as “Administrator”. Find the Command Prompt in the Accessories folder and type the command “debug.exe” and press Enter. Enter the following commands in sequence, pressing "Enter" at the end of each: "o702E", "o71FF", "q". After rebooting the laptop, a CMOS error message will appear on the screen and you will be prompted to reconfigure the BIOS. This means that the BIOS settings have been reset and you can optionally restore the settings or leave them unchanged.

Since all methods of resetting a BIOS password (zeroing) may not give the desired result, before you password-protect a laptop through the BIOS, you need to weigh everything carefully. There may be no reset jumpers, and removing the battery does not always help. If the password is still set and none of the described methods are suitable for your laptop model, you could not reset the password, then all that remains is to contact the service center.

Please note: To follow most of the instructions in this article, you must use a local Windows account with administrator rights.

How to set a password on a Windows computer

If other people have access to your computer, it is wise to protect Windows with a password. This way, your settings and data will be safe: without special knowledge, no one will be able to view or change them. Windows will prompt you for a password when you turn on your computer, when you change your account, or after resuming from sleep mode.

  1. Open Start → Settings (gear icon) → Accounts → Sign-in options.
  2. Click "Add" under "Password".
  3. Fill in the fields according to the system prompts and click “Finish”.

How to set a password on Windows 8.1, 8

  1. In the right sidebar, click Settings (gear icon) → Change PC settings. In the menu of the window that opens, select “Accounts” (or “Users”), and then “Login Options”.
  2. Click on the " " button.
  3. Fill out the fields, click “Next” and “Finish”.

How to set a password on Windows 7, Vista, XP

  1. Open the section “Start” → “Control Panel” → “User Accounts”.
  2. Select the desired account and click “Create a password” or immediately click “Create a password for your account.”
  3. Fill in the fields using the system prompts and click on the “Create password” button.

If strangers do not have physical access to your computer, it may be better to disable protection. This will eliminate the need to enter a password every time the system starts.

  1. Use the Windows + R key combination and enter in the command line netplwiz(or control userpasswords2, if the first command does not work). Press Enter.
  2. In the window that opens, select in the list the account for which you want to remove the password, and uncheck the box next to “Require username and password.” Click OK.
  3. Enter the password, confirm it and click OK.

Windows will stop asking for a password only when you turn on the computer. But if you lock the screen (Windows keys + L), log out, or the computer goes into sleep mode, the password prompt will still appear on the display.

If the “Require username and password” option is not available, or you want to completely remove your Windows password rather than disable it, try another method for more experienced users.

To do this, open the account management section using one of the instructions at the beginning of this article.

If the open section says that you are using a Microsoft online profile (sign in with email and password), disable it. Then use the system prompts to create a local profile, but do not fill out the password fields during the process.

After you disable your Microsoft account, the system will no longer sync your settings and files across different computers. Some applications may refuse to work.

If the local profile is initially active in the account management menu, then simply change the current password, leaving the fields for the new password empty.

If you delete an old password, the system will never prompt you for it until you add a new one.

How to remove the password when resuming from sleep mode

If you disable the password prompt when Windows starts, the system may still prompt you for it when you wake up. But you can deactivate this feature separately using these instructions.

  1. In the search bar in Windows, enter “Power Options” and click on the link found to the section with the same name. Or find it manually through the Control Panel.
  2. Click "Require a password when you wake up," then "Change settings that are currently unavailable" and check the "Don't ask for a password" checkbox.
  3. Save your changes.

How to remove password when waking up Windows XP

  1. Open the “Control Panel” → “Power Options” section.
  2. In the window that appears, open the “Advanced” tab and uncheck the box next to “Require a password when exiting standby mode.”
  3. Save your changes.

If you have forgotten your password and cannot log into your local Windows administrator profile, there is no need to reinstall the OS. There is a simpler solution: resetting the password protection. To do this, you will need another computer, a USB drive, and a free password reset utility.

Create a bootable USB flash drive on another PC

  1. Download the Lazesoft Recover My Password installer onto any available computer.
  2. Run the downloaded file and complete the installation.
  3. Connect the flash drive to your computer. If necessary, make a copy of the files stored on it, since all information will have to be deleted.
  4. Open Lazesoft Recover My Password, click Burn Bootable CD/USB Disk Now! and create a bootable USB flash drive using the program prompts.

Boot your computer using a flash drive

  1. Insert the prepared USB drive into the computer for which you have forgotten the password.
  2. Turn on (or restart) the PC and, as soon as it starts to boot, press the key to go to the BIOS settings. Usually this is F2, F8, F9 or F12 - depending on the equipment manufacturer. Most often, the required key is displayed on the screen while loading the BIOS.
  3. While in the BIOS menu, go to the Boot section if the system does not redirect you there right away.
  4. In the Boot section, install the USB flash drive to the first place in the list of devices that appears on the screen. If you don't know how to do this, look around - there should be some control tips nearby.
  5. Save your changes.

If the BIOS is also protected by a password that is unknown to you, then you will not be able to reset Windows password protection using Lazesoft Recover My Password.

Perhaps instead of the classic BIOS you will see a more modern graphical interface. In addition, even in different older BIOS versions, the settings may differ. But in any case, the procedure will be approximately the same: go to the Boot menu, select the desired USB drive as the source and save the changes.

After this, the computer should boot from the flash drive on which the Lazesoft Recover My Password utility is recorded.

Reset your password with Lazesoft Recover My Password

  1. Select Lazesoft Live CD (EMS Enabled) and press Enter.
  2. Reset your account password using Lazesoft Recover My Password tips.
  3. Reboot.

After these steps, Windows will stop asking for the old password, and you can set a new one according to the instructions at the beginning of the article.

If you created a Microsoft account during the installation of Windows 10, or specified a password for a local account, then every time you turn on your computer, Windows 10 will prompt you for this password. You won't see the desktop until you enter your password. I think if you came to this page, then you are familiar with this.

An account password is useful if someone else uses the computer besides you. Or your computer is located, for example, in the office. But, if it is not needed and you are only wasting time entering the password, then it is better to disable it. Now I will show you how you can quickly remove the password prompt when logging into Windows 10. After this procedure, login will occur automatically. Press the power button, and the desktop will immediately appear, and not a window asking for a password. We'll turn it off.

Please note that we will not completely remove the password, but simply disable the login prompt.

I’ll also show you how to disable entering a password when exiting sleep mode.

Automatically login to Windows 10 without asking for a password

We do this: press the key combination + R, enter in the field control userpasswords2, or netplwiz(you can just copy and paste), and click on the button Ok.

A window will open. In order to remove the password when turning on the computer, we need to uncheck the box Require username and password. Click the button Apply.

Another window will appear in which we need to specify the account password twice and click Ok.

The next time you turn on your computer, Windows 10 will boot automatically and you will immediately see the desktop. No need to enter a password.

There is another way - disable the request in the registry. But it’s much more complicated, and I don’t recommend using it. Therefore, I won’t even write about it.

Removing the password prompt in Windows 10 when resuming from sleep mode

When your computer wakes from sleep mode, Windows 10 may also require a password. This is not always convenient, so I suggest disabling password entry. But this function can be useful for many. You can, for example, press the keyboard shortcut Win + L Lock your computer so that no one can access it until you enter your password.

To turn off, open Start – Options. Choose a section Accounts, and go to the tab Login Options. In the re-login settings, set Never.

That's all, now you won't have to waste time entering passwords. But, I advise you to think carefully before disabling this feature.

How to remove password from Windows 10 computer? Knowing this You can simplify your login task.

By default, desktop PCs and laptops on which Windows 10 is installed require entering a password for their accounts or local accounts when turned on.

As a rule, this combination of password characters is selected during system installation to increase the security of confidential information stored on a computer that is accessible to several users at once.

Therefore, if security interferes and you want to disable the Password prompt, you should use one of the options for setting up Windows 10 to automatically boot to go straight to the desktop.

Pros and cons of passwordless login

The main advantage of passwordless login is quick access to the system.

No need to remember passwords and waste time entering them; PEvery time you turn on your computer, this saves valuable time, and most importantly, you will never lose your password and access to your data.

Among the disadvantages, it is worth noting the simplification of access to the computer by other people - for example, there may be children at home.

Removing the password

The principles of setting up a Windows 10 login are not too different from the actions that are performed in previous versions - Windows 7 and 8.

At the same time, it is recommended to remove protection for the entire system and individual accounts only in cases where only one person uses the computer.

If there are several users, you should leave passwords on other accounts.

There are two main ways to remove a password in Windows 10:

  • through the registry;
  • through accounts.

In addition, the password can be removed not only for the account, but also for the local account. And also - remove a similar function when exiting sleep mode.

Method using accounts

Using Windows 10 accounts is the easiest option to remove your password. The main actions will be as follows:

  • open the “Run” window by pressing the Win+R combination;
  • enter one of the commands in the dialog box - netplwiz or control userpasswords2;
  • press “Enter”;

  • select the required user in the accounts window that opens and uncheck the box that requires entering a username and password;
  • click the “Apply” button;

  • in the automatic login window, enter the previously set password twice to confirm your rights to remove it;
  • Click "OK".

Advice! After completing all the steps, make sure that the checkbox for the password requirement has disappeared. The final way to check this is to reboot the system.

Removing a password through the registry

In cases where automatic passwordless login cannot be configured for some reason, you should use the second option - the registry editor.

To do this you need:

  • open the editor using the “Run” window, called by the Win+R key combination;
  • enter the regedit command;
  • press enter key;
  • When a window appears asking you to make changes to the system, select the “Yes” option.

  • in the registry go to the “HKEY_LOCAL_MACHINE” section;
  • open the SOFTWARE, Microsoft, Windows NT, CurrentVersion and Winlogon subsections in turn;

  • find the DefaultUserName parameter in the right column of the editor, double-click on it and check whether the value field contains the name of the account for which the password is being changed;
  • select the option called “DefaultPassword” there or create it if it has not already been created. To do this, click the “Create” button and select the “String parameter” value. Enter the password in the “Value” field;
  • enable the ability to automatically log into the operating system by finding another parameter - “AutoAdminLogon”. This default value is zero and must be changed to one for passwordless entry.

After you restart your computer, Windows 10 should start without you having to enter passwords.

However, due to the complexity of this method and the possibility of changing the registry, it is better to use the first method first.

Disabling the password for local recording

Using a local account, which limits the user's capabilities, but is often necessary for a work computer, you can also remove the password when logging into Windows.

After this, even a system locked with the Win+L keys does not require entering a password. All that is required for this:

  • launch the command line (requires logging in with an administrator account);
  • enter the net users command and pay attention to how the user name is displayed;
  • repeat the input again using another command - “net user username”;
  • press Enter.

After the command prompt is closed, the Windows 10 user is able to log in without using a password.

Removing the wake-up password

In addition to entering a password when logging in, the security requirements of Windows 10 lead to the need to request a fifteen-digit code when exiting “sleep mode”.

However, on a home computer such protection is practically meaningless.

And in order to get rid of it, you should use a special setting in the accounts menu.

To change your login options, you need to set the time interval at which Windows asks for a password to never.

Now exiting sleep mode will be passwordless and quick.

There is another way to remove the password prompt when you turn on a temporarily dark screen - using the “Power Options” item located in the control panel.

To do this, when setting up the power supply scheme, you must select the item for changing unavailable parameters, change the value “Yes” to “No” and click “Apply”.

conclusions

By using password disabling methods, you will have a system at your disposal that does not require entering a code.

However, if it is possible for others to access your computer, passwordless login is not safe.

And it’s best to leave the password, since saving a few seconds of time is not worth the violation of confidentiality.

Almost always our electronic devices are password protected. Often we do this just in case, just in case. After all, why do this if your PC or laptop is used only at home, with loved ones, or in the office, when no one has access to it? Let's say you decide not to burden yourself with remembering complex combinations of symbols and numbers. The question arises: when turned on? First, we take the code from the administration and the password reset disk.

What is the administrator password and how to remove it

When you turn on your computer or laptop for the first time, each user is asked to come up with and enter a security code. We do this and write it down somewhere so that next time we can log into our device. This combination is the administrator code. Now let's look at how to remove the password. To do this, we launch the operating system and find ourselves in it as an administrator. We go along the following path: “Start”, “Control Panel”, “User Accounts”. Click on the last logo and in front of us is the administrator account. To the left of the image is the “Delete your password” tab. You'll have to enter it again. And that's it, it's done.

Removing user account passwords and user accounts themselves

To clear the codes of other accounts, click on “Manage another account”. Then we find the one we need in their list and do as in the previous case: to the left of the image there is the inscription “Deleting your password”. Click on it and enter the code from this account, not the administrator. It is done. So we figured out how to remove the password from your computer when you turn it on. If you have many accounts and you do not want to write different combinations when turning on the device, evaluate the need for these entries and delete all unnecessary ones. To do this, after “User Accounts”, go to “Manage Account” and click on the desired one, and then on “Delete Account”. After which the system will ask whether this user’s files need to be saved on the computer. If not, delete them; if you need them, then select the “Saving Files” tab. To complete the operation, you must confirm it. There is also a standard account called “Guest”. It is not recommended to remove it, but you can enable it or disable it completely. When disabled, only the administrator profile will remain and, of course, the question of how to remove the password from the computer when turning it on will disappear. In the case when you have removed it, the device will always be turned on without additional manipulations.

Creating a password reset disk

It also happens that you forgot your password. To prevent this from becoming a big problem, users create a password reset disk. Using it, you can easily reset and log in. How to do it? Simple enough. You need a flash drive with a minimum of free space; the information on it will not interfere or be damaged. Consider the following factors: the disk must be made for all accounts; if you create several flash drives, only the last one will work; When changing the password, there is no need to create a new disk; the old one will function. Now about the process itself. In “Start”, click on the photo of your account and insert the external memory into the device. Select “Create a password reset disk”, a new window will open, click “Next”. Select your flash drive, enter your account code and click “Next”. The process itself will begin, during which you will need to click “Next” again, and then “Finish”. All! The userkey.psw file appeared, which is responsible for the reset operation.

How to remove the password from your computer when you turn it on using a reset disk

Something you have been afraid of for a long time has happened. When you turn on the computer, you need to enter a code, but it is lost and the memory is empty. What to do? And then you remember that not long ago you secured yourself by creating a flash drive with a reset password. Find it and try to log in without entering the code. A button appears that says “Reset Password.” Click on it and insert the saving flash drive. If you want to have a new password to log into the system, enter it twice and a hint; if you don’t want it, just click “Next.” That's it, the code is reset. In fact, it is recommended to have a password when you turn on your computer. So keep it well or memorize it.


2024 gtavrl.ru.