How to make it in kmplayer. Where to download KMPlayer

Youtube

Hello! Do you use autostart? Windows system? Autorun is when you connect a storage medium of any information to your computer and your computer automatically launches a program that matches the content that is on the connected storage medium. For example, you insert a CD with music and your music player automatically launches and starts playing it. So, for those users who use this most useful feature, you can configure which video player to launch if there is a video on the inserted media.

At the same time, many users use to watch video - both located on the computer and on CDs - popular video player KMPlayer. But, if you insert a DVD-Video disc into your computer, then in the autorun options for your favorite player KMPlayer WILL NOT.

Competent specialists, of course, will go to "control panel - autorun" in order to add and select KMPlayer in the startup settings. But! It won't be there either. This is clearly seen in the image below. Although the KMPlayer program itself is already installed on the computer.

Why is that? And everything is very simple - during installation, KMPlayer is not registered in the registry as an application suitable for working with DVD-video. Although, it is quite obvious that KMPlayer itself reads DVD video discs perfectly. For reference, programs such as GOM Player or Media Player Classic as programs for working with DVD-video are even prescribed.

"What to do?" - you ask?

We'll fix the situation! KMPlayer can be registered on the computer as a program suitable for working with DVD-video through autorun, using the settings of KMPlayer itself.

For this:

1. Launch KMPlayer. We do this from a shortcut on the desktop or through Start-All Programs.

2. Click F2 to display the player settings window or opens the settings window in any other way known to you.

3. In the left part of the settings window (in the vertical column) we find item "Associations / Capture". Let's go into it.

4. At this point, we look at upper part windows, go to the tab "Associations". In this tab, we mark with birds the items “Video”, “DVD”, as well as, if desired, “Audio”, “Audio CD”, located in the window under the inscription “Autorun CD / DVD XP”. It should turn out like in the picture below:

When all the settings are successfully done, click "CLOSE" and close KMPlayer itself. After doing necessary settings back to panel Windows controls, and in it - in the autorun settings. And now, in the section responsible for autorunning DVD-video discs, the much-needed KMPlayer appears. We select it as the default program. All is ready! Now, when you insert a disc into your computer that it recognizes as a DVD video, KMPlayer will automatically launch and start playing it.

Here is how the autoplay setting changes after changing the settings in KMPlayer itself:

I hope everything worked out for you. Enjoy watching your favorite video with your favorite KMPlayer video player!

So you've installed KMPlayer and launched it for the first time, what's next? Look at the main window of the program. Depending on the version, it looks just like a black square, or like a window with a set of videos from the Internet.

Any video can be viewed by clicking on it with the mouse. But really interesting videos There are few here and we will not waste time on them. It is better to click on the vertical arrow on the bottom panel of the player, find the movie you want to watch on your computer and open it. Or just run the video in the Explorer folder - if during installation you did not uncheck the video file association setting, the movie will open in KMPlayer.

Playback will start on the left side of the player. Click on the gray arrow button to close the obstructing panel on the right.

Now you can enjoy watching.

Click Enter button, or click on the dotted square icon on top panel program to expand the playback window to full screen.

Press Enter again to return to windowed mode.

To pause playback, press the space bar or click on the 2 vertical sticks on the bottom control bar. To rewind, use the arrows in the same place or on the keyboard.

The volume is adjusted by scrolling the mouse and the slider on the panel.

Click on the gear icon to open the quick settings menu.

Here you can change the picture settings (brightness, contrast, etc.), turn on the equalizer, adjust the playback speed and repeat, select subtitles and open the image and video capture menu.

If you open a movie in 3D format, KMPlayer will automatically recognize it and turn on the display mode in the same stereopair as the running video. The same goes for rollers. virtual reality. If KMPlayer did not automatically enable the correct display mode, select it manually by clicking on the 3D or VR button in the panel at the bottom left.

To open KMPlayer settings, press the F2 button on the keyboard (at this time the player must be running and its window must be active).

Here you can change the configuration of plugins, codecs and filters. For inexperienced users, we do not recommend changing unknown settings, as this may cause playback problems. But if you have already messed something up, click the "Reset" button to discard all changes and return to the default values.

The latest version of KMPlayer can play videos over the network. Click on the program icon in the left upper corner and select Open URL or Open FTP.

In the "Open URL" menu there is a ready-made list of Internet channels. Here you can open videos by direct links and save them to your list.

This is the basic thing to know about using KMPlayer on Windows 10, 8, 7 and XP. If you have any questions or something in the instructions is not clear - write in the comment form below, the moderator will definitely help.

Please enable JavaScript to view the comments powered by Disqus.

Let's go to the program settings window. Right-click on the main window and select the submenu Settings -> Configuration . As picture:

Adjustment of brightness - blur - sharpness, etc.

See screenshot below

Player settings menu

The settings window will appear before us:

KMPlayer settings window

You need to do it as in the picture. Remember playback location very handy feature. When you want to watch a movie later. Just close the player and when you need to open it again and start the movie - it will continue from the last viewed moment. It is also worth remembering that for audio files it is better to disable this function.
Expand the General menu for advanced settings. Go to submenu " Repeat/List » next on the right, select the window « Playlist ". Uncheck the "Clear standard list at closing." So that your playlist is not reset when you close it (and you spent so much time creating it).
There is also an interesting subparagraph Keys/Global "and the window on the right" Global keyboard shortcuts ". Here you can set up global keyboard shortcuts for the most common operations when the player window is not active. For example, you are working in Word, typing text and suddenly want to switch to the next song, then in order not to make unnecessary movements, you can press a pre-selected keyboard shortcut. Click the "Add" button, a window with a choice of function will appear. Select "Playback" then "Next". An entry will appear in the window. Select a keyboard shortcut at the bottom. To do this, left-click in the field next to which "Key" is written in red letters and press the key combination. For example in my case it is Ctrl+Alt+PgDn.
Next, look for the menu " Decoders » right selection « Using built-in codecs ". The recommended value is "Use when system codecs fail." But you need to remember that in this case you need to download and install a set of decoders ( special programs allowing video decoding). The best K set Lite Codec pack. Take . Otherwise, use the "Always use" option. Why did I draw attention to this? Because with some video files there are problems when playing with built-in codecs. To avoid this, use my advice.
It is also worth paying attention to the point " Audio processing ". You can check the box next to "Built-in audio processor (Crossfader)" and next to "Use only in audio mode." Also, next to click the "Set" button and in the window that appears, set 2000 ms in both fields. What is it for? So that when switching from one song to another there is no silence. The first song will slowly fade out in volume, while the second one, on the contrary, will grow. Get beautiful continuous playback.

Also, on quiet video files, turning on the setting “ Automatic adjustment volume (normalization)" in the "Compressor / Normalizer" item. The program will automatically increase the sound volume.

Menu « Video processing » I do not recommend touching, because you can lose a lot in computer performance. There are a lot of settings and filters, and if you activate everything, the computer will start to slow down (even a powerful one).

Well, here we are with the settings.

Several useful combinations keys (work when The KMPlayer window is active, to make the window active, click on it with the left mouse button):

Left and Right Arrows - Rewind and Forward
Up and down arrows - volume up and down
Enter - in video mode, expand to full screen
Alt+E - show/hide playlist
Space - pause
PgDn and PgUp - next and previous track / video in the playlist
Ctrl+D - open DVD menu

At the request of the workers, I will describe another very useful feature— Displays the items in the playlist. In KMPlayer, it can be configured in the most sophisticated way. We go to Settings - General - Repeat/List and select the tab Playlist :

Configuring KMPlayer Playlist Entries

You need to change the values in the Title field. It is empty by default (everything should display normally). By clicking on the Info button, you can view the list of macros to add to this field. Here are some examples:

$filepart(%filename%) - will display the file name

% album% - % artist% - % title% - Album - Artist - Track name (you can put your own punctuation marks, the order too, the main thing is that the macros remain original)

$if2(%artist% - %title%,$filepart(%filename%)) - if there are artist - track name values, then displays them, otherwise displays the file name

$caps(your caption) - converts any value inside to a string with the first capitals, the rest lower case. Example SKRILLEX - FIRST OF THE YEAR - Skrillex - First Of The Year. Replace the words "your title" with the desired expression.

Also, sometimes there are problems with DVD playback when using codecs installed in the system (my discs played without sound). We open settings DVD - Decoder :

DVD settings

And check the boxes next to the items Built-in decoder for DVD viewing(as in the picture above).

An important function of the player is video buffering. This is necessary for watching movies over the network (and via wi-fi) and movies with a high bitrate when other programs access the hard drive. In order for the video to play smoothly, you need to increase the buffer. We go to Settings - Filters - Input filter . Put a tick next to Asynchronous file processing and one more Enable file buffer on hard drive. Buffer size to taste, the larger the better):

Setting the video playback buffer.

The difficulty of selecting suitable ones often discourages beginners and not so users from switching to free programs. partly able to solve this problem. When installing KMPlayer, you will not have to download numerous modules, because, as a rule, codecs from the proprietary livabcodec library included directly into the program are sufficient for the vast majority of tasks. Among other things, KMPlayer differs from other audio and video files in the ability to update missing codecs, read incomplete and archived files, create screenshots, capture video and audio, as well as integrated applications, including games. The presented LAV assembly, in contrast to regular versions has an extended set of decoders, splitters and registry settings.

Built-in codecs

To be honest, I did not manage to make the player drift in front of the files I proposed. They say that the player will open a dialog box and offer to download the missing codec. The main "feature" of KMPlayer is the presence of an impressive livabcodec library in its composition. However, in exceptional cases it may be necessary to update it. When updating the program, codecs are automatically updated, search new version occurs every time you turn it on if you have checked the corresponding item in the settings. To do this, press the F2 key and call the control panel. On the General tab, check the box "Automatically check for updates".

KMPlayer supports third-party codecs that you can download to your PC on your own online. In the "settings" menu, select the "decoders" tab, and then the desired item "3rd party video/audio decoder" => "external decoder".

Working with subtitles

To use the available subtitles, you need to press the right mouse button, select the "subtitles" submenu, then "show/hide subtitles". The same can be done using the combination Alt + X or in the settings => "subtitle processing" => "display subtitles".

KMPlayer allows you to set the position of subtitles relative to the inner borders of the window. To change the position of subtitles in a subitem "subtitle processing" select tab subtitle alignment. Movement up/down can be done with the combination Ctrl + ъ or Ctrl + X , right/left - Alt + ъ or Alt + x respectively.

3D Viewing Features

Thanks to KMPlayer, there is no need to buy a 3D TV to watch 3D movies. A special 3D mode will turn any video file into a 3D picture. To do this, in the lower left corner of the program there is an icon "3D Video Cycle". Possible modes "next to the image" and "above and below the frame" are activated by successive mouse clicks on the icon. Options color channels are changed in the "3D Screen Control" tab, which can be found after clicking right click mice on the image.

Audio tracks

If a movie has multiple audio tracks, then switch them by means of a combination Ctrl keys+ X .

The first time you run the program, you will be prompted to run it. initial setup. If you are an inexperienced user, then select required language and the “default setting” item, i.e. default settings. If there is an irresistible desire to sharpen the program for yourself, then choose "User define Setting". Click next and follow the prompts of the assistant. Reset is performed in the "Settings" at the bottom of the window.

How to make it in kmplayer. Where to download KMPlayer

Popular Articles

Latest Articles

Sections

Pages

Special projects

Contacts