How to unlock a Nokia push-button phone. Windows smartphones
Instructions
The SIM card is blocked using a PIN code. These are the numbers that must be entered when turning on. This security measure is intended to protect the owner’s personal data in the event of loss or theft of the SIM card. If you entered your PIN incorrectly three times, you can recover it using the PACK code. It is located on the SIM card packaging. If the packaging is missing, contact the customer service center, providing your passport details. Your SIM will be replaced.
Locking the phone keeps the device owner's data safe in case of theft or loss. In order to unlock, you will need to enter the reset code or phone number. In order to receive a reset code, you must contact authorized service center"Nokia" or contact the company representative. You can find them by going to the address www.nokia.com.
Phone flashing - updating the mobile firmware. To perform this action, the device must be synchronized with the computer. Install drivers and software, then connect your phone to your computer. If the package does not include a software disk and a data cable, download the software from the website www.nokia.com, and buy a data cable in a store cellular communications. Download the software from allnokia.com and then update the firmware.
Contact your cellular operator. You can request a special one, once used, you can use the phone using a SIM card from any operator. You must provide information confirming your ownership of this phone, and after that the unlock code will be given to you.
Video on the topic
If you doubt your ability to unlock your phone, it is better to trust the services of the service center.
Often when changing removable panels phone Many people come to the conclusion that it is no longer possible to assemble the device. Taking this fact into account, before independent shift telephone panel, you should know how to remove cover With phone and the panel itself for its subsequent replacement.
You will need
- Cell phone, replacement panel, kitchen knife.
Instructions
To begin, make a sketch of your back on a piece of paper. This is necessary so that during subsequent assembly you do not get confused with the location of certain screws. Drawing a diagram phone, you can start removing its panel. To do this, remove the rear cover, remove from the battery.
Disassembling the panel. After you remove the battery from phone, you will have access to the screws that secure the panel. They should be unscrewed in order (given their size, the tip of a kitchen knife is ideal for screwdrivers). After unscrewing one screw, mark its location on the previously drawn diagram and place it in the appropriate place in the drawing. Unscrew all the screws in the same way, after which you can remove the panel itself.
In addition to the screw fastening of the panel, it is also secured by plastic couplings of the product itself. In order to remove old panel, rid it of the old couplings (carefully inspect the body to understand how the panel is attached to it).
Video on the topic
Sources:
- how to change iPhone panel in 2019
Sources:
- how to remove encoding from a computer in 2019
The blocking code is used on company phones " Nokia" to protect your phone, SIM card, or from use with a SIM card from another operator. Depending on the type of protection, there are different types operations to be carried out.
Instructions
Lock cell phone is designed to keep the owner's data stored in the mobile memory safe in case the phone is lost or stolen. The best option will use a reset code or a firmware reset code. You can easily find these codes on the Internet, but the best option would be to request them from the manufacturer using the contacts located on the website www. .com by providing the phone's IMEI number.
You may also encounter a type of protection such as locking your phone to an operator. In this case, the phone is locked to one cellular service provider. When you try to turn on a phone with a SIM card from another operator, you are asked to enter an unlock code. In this case, you need to contact the representative office of the operator under which your mobile phone. Go to its official website, then contact using hotline by writing a letter or visiting representatives. Provide your phone's IMEI number, as well as any additional information that may be requested, and you will receive an unlock code.
SIM card blocking is used to ensure maximum security personal data of the subscriber, such as phone number, phone book, as well as messages. When blocked with a PIN code, it is impossible to use the SIM card, and after entering it incorrectly three times, the SIM card is blocked. You can unlock it only using the pack code, which you can find on the SIM card packaging. If entering the pack code is not possible, contact your representative office. mobile operator in order to receive new SIM card. In this case, your personal data will be lost, but you will retain your phone number.
If your phone does not accept the key lock code you know and refuses to put your phone into normal mode, it means someone played a trick on you and changed the code. If the phone has a BB5 platform, removing the lock code is not so easy. You will need a cable to connect your phone to your computer, the computer itself, and the NSS program.
This article presents everything related to secret codes and more for Nokia mobile devices, such as smartphones and feature phones. We hope that the information will be useful to users, since the article contains the most popular and most frequently used codes that are required in Everyday life when working with mobile devices.
For those users who are not yet aware, we provide the numbers of the Nokia factory security code:
Using code *#06# You can display the IMEI code of the device on the device display.
Using the entered code *#0000# you can get information about the device model, its firmware version, release date, and other at least helpful information, but it all depends on the modification.
Using code *#7370# can be done full reset to factory settings after which everything will be erased, this applies to installed applications, files, personal content. That is, the device will become “clean”, as it was at the time of purchase, based on which, before this procedure, it is advisable to save everything that is of at least some value. It is possible that before you roll back to factory settings, the device will ask you to enter security code. Let us remind you that this is 12345.
There is another option for how to perform a full reset. mobile device Nokia to factory settings, which is essentially a code replacement *#7370# . After turning off the device, press and simultaneously hold three keys - the call button, the “star” button and the “three” button, as well as the on/off button. If you have enough fingers and you did everything correctly, after waiting a few seconds, you will reset your dialer to factory settings. It should be remembered that in in this case with the return to its original state, you lose everything that you have acquired over the years of close acquaintance with the phone.
Using code *#7780# will be reset to factory settings. At the same time, despite the fact that all settings will be rolled back to factory settings, everything that the user has installed, along with files, contacts, and other settings, will not be deleted. After entering this code, all settings, themes, etc. that were on it by default are returned to the device. But everything that was downloaded and installed is everything custom settings During ownership of the device it will not be permanently deleted. As in the previous case, before resetting the device may request a security code - 12345.
Through code *#92702689# On the screen you can view information regarding the total operating time of the device. In addition, again, on some modifications the IMEI code may be displayed, as well as data on the date of manufacture of the device and the date of its purchase - changes can be made in this field once, in addition, this applies to the date of repair if it was a service center.
Through code *#2820# On the display you can view information with the address of the Bluetooth device.
After entering *#62209526# The WLAN MAC address will appear on the screen.
This question is often asked by users Nokia phones on the BB5 platform, since it is most often forgotten or sometimes happens when a smartphone is purchased second-hand and a security code has already been installed, but it is unknown. A security code is set when they want to block some data from being viewed by unwanted people, such as children or classmates. But what to do if you forgot this code or didn’t know it at all? Of course, there is another option to go to the service center and they will tell you this code, but it is clear that for some symbolic amount of money) But you can do it completely free of charge and at home.This code will not reset even the full format of the smartphone, no matter how much you want it. And if somewhere a smartphone asks you for this code and the phone is new, and you definitely didn’t install it, then by default this code is 12345I won’t describe all the methods that exist for this (via JAF, Phone Unlock, NSS and Nokia Unlocker), but I think the method is through the Mbro USB Nokia program Tools Lite is the simplest and easiest in this matter. You just need to install the program and click a couple of times with the mouse. Below I present the method itself with screenshots of how all this should be done.1. First, download the Mbro USB Nokia Tools Lite program itself mbro-usb-nokia-tools-lite and unpack it. We launch the program and see the following window:2. Connect your smartphone in PC Suite mode3. Next, move the cursor over the button with the microphone (I circled the button with a red frame on the screenshot) and click on it:
4. After this we see the program window, where in last line we see our treasured security code. We rewrite it and save it if we do not change it in the future, or we immediately enter it and check it.
The password is suitable for cases when the phone is fully turned on. The program has been tested on computers running Windows XP and Winows 7 and on Nokia N79 and Nokia 6300 smartphones.For reference, here is a list of phones on the BB5 platform: 3109c, 3110c, 3250, 3500c, 5200, 5220, 5230, 5300, 5310, 5500, 5610, 5700, 6085, 6086, 6110, 6120c, 6121c, 612 5, 6126, 6131, 6133 , 6136, 6151, 6233, 6234, 6267, 6270, 6280, 6290, 6300, 6301, 6500c, 6555, 6630, 6680, 6681, 6682, 7370, 7373, 7390, 7500, 7900, 8600, E50, E51, E60 , E61, E61i, E62, E63, E65, E66, E70, E71, E75, E90, N70, N71, N72, N73, N75, N76, N77, N78, N79, N80, N81, N82, N85, N90, N91 , N92, N93, N93i, N95, etc.
Instructions
First of all, you will need a reset code or a firmware reset code. You can get them by contacting a Nokia service center. You can contact him using the contact information located on the website www.nokia.com. You will need an IMEI - a number located behind back cover under the battery. You can also use a search engine to find codes that are publicly available. Please be aware that using some codes may result in the loss of data stored on your cell phone, so only use those that come from trusted sources.
If your attempt fails, reflash your phone. To do this, you will need to synchronize your phone with your computer. Download drivers and software from the website www.nokia.com by selecting your phone model from the list. If the data cable required for flashing is not included in the package, buy it at a cellular store. Connect your phone and make sure the software "sees" your phone.
To reflash your phone, you will need the factory firmware responsible for the operation of the phone, as well as software to perform this operation. Use Nokia fan sites such as allnokia.ru. With their help, you can find not only the necessary software, but also detailed instructions for your phone model. The best option would be to use factory firmware that does not contain traces of outside interference. Make sure your phone battery is fully charged, otherwise your mobile may turn off in the middle of the operation. Copy personal files from your phone to your computer, then update your phone software. Once the operation is complete, copy the data back to your mobile phone.
Sources:
- how to remove security code on nokia
- 2610 Requests security code
Pin- code is an analogue of a password that is used to authorize the SIM card holder when turning on the mobile phone. The owner is usually given several attempts to enter the security code A. If they were entered incorrectly, the SIM card is blocked. These are the basics of using a mobile phone that every owner knows. In addition to pin code and there is another password - Security Mastercode, which blocks access to some functions. Therefore, situations when you need to remove the protective code, are very common.
You will need
- Nemesis Service Suite
- Nokia Unlocker
- Drivers for USB cable version 6.85
- Cable CA - 53
Instructions
In case you are unable to use the method indicated in step one, use the firmware reset method. To do this, contact the manufacturer to obtain code firmware reset. In this case, all data that you have saved is erased, the phone returns to its factory condition.
Also, you can use code settings. In this case, the data is not erased, but all settings that you have made are reset, including security code. Next, two options are possible: either protective code will be deleted completely, or it will be reset to code, which is the default. In this case, you only have to contact the manufacturer to find out the standard protective code.
Sources:
- phone security code
In cell phones" Nokia"There are several types of blocking: blocking the phone for the operator, blocking the SIM card, and blocking the phone memory. When unlocking the protective code of each type, you must follow a certain sequence of actions to ensure unlocking in the event of loss of protective code.
Instructions
When the phone is locked " Nokia"under the operator, you should contact the cellular operator under which the phone is locked. This type Locks exist to prevent the phone from being used on a different operator's network than the original one. When contacting your operator, request an unlock code that will allow you to talk by inserting another SIM card. If you are unable to get the unlock code, you will need to flash it.
To flash your phone, you will need a data cable, drivers and synchronization software, as well as flashing software and the actual firmware you plan to use. Firmware is the software that is responsible for the full functioning of a cell phone. Synchronize your phone with your computer using a data cable, then upload the firmware. Be sure to fully charge the battery before starting the operation, and also back up all personal information on computer.
When blocking a SIM card, pay attention to the SIM card. It should contain a PIN code and a PACK code. If you have forgotten your PIN code, enter the one indicated on the card. Otherwise, enter the pack code, which will allow you to reset your forgotten PIN and enter a new one. If these attempts fail, contact your operator's service center to get a new duplicate card of your blocked SIM card.
If your phone is locked, you will need to reset all phone settings, reset the firmware, or reflash the phone. To obtain special codes for settings failure or firmware reset, contact the service center. Please be aware that when using these codes, all your personal data may be erased. To flash your phone, use Step No. 2.
Sources:
- how to remove phone security code
When using Samsung phones, you may encounter three types of blocking: phone security code, phone block for operator, and SIM card PIN code. In each case, there is a sequence of actions that must be taken to remove the protection.
For many years now, a mobile phone has been viewed not as an expensive toy, but as an essential thing in everyday life. And therefore, any malfunction of the device can not only cause the owner negative emotions, but also cause disruption to the labor process, etc., and this is no longer a joke. No one, even the coolest brands and models, is immune from such misunderstandings.
For example, a mobile phone is stuck on lock: the security code was forgotten or they didn’t know it at all, if the phone is “used”, bought second-hand, and ask the numbers you need the new owner did not make a fuss. The company is known and loved by many Nokia. How to remove the code Nokia lock? People who have encountered similar problem, they know that the problem can be fixed, although sometimes they have to tinker.
So, to remove Nokia lock code at home, you can use at least two options.
Option one: the “scientific” poking method.
- If the mobile phone turns on, it should be connected to the computer via PC Suite. Then it will be possible to remove the Nokia security code if it is requested immediately after turning on the device.
- You should download the JAF Setup utility; drivers for it will fit from any boot disk from Nokia.
- Turn on the phone, find what its resistance is. U different models it may vary.
- Next you will need two small, 30 centimeters each, wires and two ordinary sewing needles.
- The whole structure is connected in this way: needle, wires, resistance, wires, needle. The sequence must be strict! A power supply of 3.6 to 4 V is connected. The connection is made to the + and - buses, or the BSI contact is isolated from the battery contact. Those 2 needles are inserted between the battery contacts Cnd and BSI. Next, press the power button on the phone. The device itself should not twitch or vibrate so that the needles do not fly out. A few seconds after turning on, the display should indicate with an inscription like “local mode” or “Test mode” that the experiment was a success.
- Next, use a USB cable to connect the phone to the computer. The latter should detect Nokia as turned on and working normally. We install drivers through the computer. Next, you need to install the JAF program, open it and click “start”.
- The next step on how to remove the Nokia lock code is to go to the bb5 tab. There, next to the Read User Code item, check the box and click on Service. When a new dialog box appears, click on the “Read Code” item.
- When the operation is completed, the program itself will write the device code to the left of the button
Read Code.
Note: this method good for mobile phones created on BB5 platforms.
Method two: “software”
This method is also used at home, although, of course, they know how to remove the Nokia lock code in workshops at cellular communication stores. But contacting them costs time and money, and you can do everything yourself quickly and free of charge, which in itself is beneficial.
So, another way to “revive” is using the Mbro USB Nokia Tools Lite program. It is useful if the phone asks for a password before turning on, and therefore cannot be connected to the computer. Then you can try to get the lock code this way:
- The program needs to be installed, unpacked, and launched.
- Then connect the phone via PC Suite.
- Move the cursor over the button with the microphone and click on it.
- In the program window, in the last line there is the very security code that was needed. It should be entered into the phone to check its functionality. And, besides, it’s better to write down the code so that later you don’t have to fight with the phone again.
- This method, which tells you how to remove the Nokia lock code, as well as the password, is suitable for those phones that turn on completely. The program itself works on computers that have Winows7 as the operating system. And as phones according to the model Nokia smartphones N79 and
In the end, the phone can be formatted if other options do not work. But this is an extreme case. Although, then you can completely update the software, install another, more interesting one operating system, various utilities and ultimately get new model, even more perfect - as long as the filling “pulls”, i.e. "insides" of a mobile phone.