How to check the ink level in a cartridge. Good old inspection
You can check the printer cartridge for functionality even before installing it in the printer. Such a concept as a “footprint” will help determine the condition of the cartridge, since it implies a trace left by the cartridge on a completely dry and clean napkin. This trace will allow you to check the cartridge, both before and after refilling.
You will need
- - cartridge;
- - toner;
- - clean dry wipes;
- - Printer.
Instructions
Instructions
It is impossible to know the level of paint just by looking from the outside. The very first sign of running out of ink is fuzzy printing and the appearance of poorly printed areas.
Devices with own display have a corresponding item in the settings. For example, in Epson printers You must click on the “Setup” button and select “Ink Levels”. The display will then show a message indicating the remaining ink level.
IN Windows status cartridges can be found using the Status Monitor program, which is supplied with the device on the driver disk.
Open Status Monitor via double click left mouse button on the printer icon in the taskbar. A window will open showing the amount of ink in the cartridges.
In order to determine the ink level in HP cartridges there is also special program. Click the Start button, select All Programs - HP, click the folder with the name of your HP device. Click on the “Estimated Ink Levels” tab, which will display the approximate ink level in the cartridge.
Checking the ink in Canon devices is carried out in a similar way by clicking on the printer icon in the taskbar.
If “third-party” ones were purchased (produced by another manufacturer), then the exact level cannot be determined using programs. As a rule, the surface of such cartridges is made of translucent plastic, so the amount of ink remaining can be seen by removing the device from the printer.
note
Windows itself does not have a universal method for determining ink levels, so always check the disk that came with your printer.
You can determine that ink is running low by looking at the device indicators. If the paint runs out, the corresponding light will light up.
Sources:
- The printer has run out of ink
With daily use of an inkjet printer, the ink in the cartridge gradually runs out. It's a shame when they end with last pages your coursework or diploma. As a rule, this is what usually happens. If you do not refill the cartridges yourself, then refilling a new cartridge or refilling an old cartridge will take both time and money. To avoid this awkward situation in the future, make it a rule to periodically check the amount of ink in the cartridge. Read on to find out how to do this.
You will need
- Checking ink via software.
Instructions
If you think that you should disassemble the cartridge and see how much ink is left, you are deeply mistaken. There are known cases when users of personal computers took the cartridge and their own, and then weighed it on a medical scale. All these methods cannot display the real picture of the condition of the ink in the cartridge, because if you disassemble the cartridge, you will break it, and weighing on a scale will not be accurate for many reasons.
To know exactly how much ink remains and how many pages you can still count on, you need to use software checks of these values. The very first sign that the ink will soon run out is fuzzy printing the entire page or individual parts. The sheet may contain light streaks, which indicate printing problems.
The second sign that your cartridge is low on ink will be the “Power On” or “Printer Status” button blinking periodically. This case is already critical, which means that there is practically no ink left. In this case, you can count on only a few pages of printing.
In order not to determine the amount of ink based on the above criteria, you must use the software that was installed when you connected the printer. As a rule, the printer driver already has a program built into it that monitors the amount of ink. When printing starts, the Print Status window appears. This window contains information about the document being printed and the ink status.
Sources:
- checking the printer
It often happens that you urgently need to print something, for example, coursework or a diploma, and according to the law of meanness, paint in printer ends at the most interesting part, somewhere in the middle. And then most people begin to lament the fact that they didn’t think to look in advance how much paints left in printer. Although this is not so difficult to determine, and this process only takes a few minutes.
Instructions
The first option for determining the level paints Suitable for thrifty people who already have a new one with paint ready when the old one has not yet run out. There are few such people, but they exist.
If you belong to this category, then you just need to take it and compare it by weight two. What happens in the difference is the amount remaining paints. Although many advanced people would call this method "prehistoric", it still lives on today. The main thing in this matter is skill. Over time, you will get the hang of it and will be able to easily determine how much paints down to the gram left.
If you are not a fan of “manual” labor, then there is another way for you. For example, a special monitoring program that is installed along with the software. If it is not there, you can easily install it yourself. It will help you determine the level paints V printer.
But there are pitfalls here. This program shows real results, only if you are not refilling the cartridge yourself. And this is a widespread phenomenon. Nobody wants to spend on something that can be done without breaking the budget.
Then when asked by the program what action you are performing: put new cartridge or you leave the old one, it’s better to answer – old. Then the program will work optimally and show results in reality.
Display test and service pages. The service page shows all its settings and resources. And on this list there is a level paints .
But the test page displays the results of checking the printer for errors. The total amount of remaining paints.
Video on the topic
Check cartridge printer You can check its functionality even before installing it in the printer. Such a concept as “footprint” will help determine the state cartridge a, since it implies a trace left cartridge I eat on a completely dry and clean napkin. This trace will allow you to check cartridge, both before and after refueling.
You will need
- - cartridge;
- - toner;
- - clean dry wipes;
- - Printer.
Instructions
To begin with, if cartridge is in, carefully remove it out. Next, place several napkins (4-5 pieces) in one layer on a flat, hard surface. These wipes are necessary for two reasons. Firstly, they will be marked by cartridge and, secondly, they also represent a means of protection cartridge or rather, its nozzle plate from mechanical damage.
Press gently cartridge to the surface of the napkins for 1 second. Remove cartridge and examine the resulting print. Serviceable black cartridge will leave an even black color. Photo- cartridge or a color model will leave lines of different colors running parallel to each other. If the ink is in cartridge If they have dried out, then to obtain a print, dip its “nose” in a special cleaning liquid for about ten minutes and repeat the procedure.
Refilled with toner cartridge check with printer by printing a test sheet. During normal operation, the image on the sheet should be clear, clearly visible, and free of ink streaks and dirt.
note
When checking a newly refilled cartridge, make sure that the toner does not scatter in the room, since if it enters the respiratory tract, it can cause various allergic reactions. Moreover, the toner is very flammable, so it can only be used in a room where there is no open fire.
Helpful advice
Not always with poor quality images on the sheet or its absence, the cartridge is to blame, since the breakdown may lie directly in the printer itself. To accurately determine the cause of the malfunction, contact specialized shops that repair computers and refill cartridges.
For any user personal computer printer is necessary device. Especially for those who print documents or photos. It always costs a lot to print photos. paints. And often you are faced with a choice: whether or not to send the next batch of photos for printing. After all, it may turn out that the photos were sent to the printer, but it ran out of ink. And the photos were printed with defects.
You will need
- - administrator rights.
Instructions
How to check quantity paints V ? Unfortunately, operating system Windows does not have universal method level checks paints V printer. It all depends on the model of your device. The first thing you can do is read your printer's data sheet and related documentation. As a rule, there are written methods for checking the level paints.
You can see quantity paints independently, without reading documents. If your model provides this option, you can find it in “Properties”. To view from the Start menu, go to Control Panel. Then select the "Printers" tab either directly from the Control Panel or from the "Hardware and Sound" tab. When the printers window opens, double-click with the left mouse button on your printer icon.
At active use The inkjet printer starts to run out of ink quickly. Therefore, it is very important to monitor the ink level, otherwise printing may end at the very earliest. inopportune moment. To monitor the condition of cartridges, there are special programs that are supplied with the printer driver.
You will need
- - printer driver disk
Instructions
There are situations when you need to print a significant amount text pages or illustrations. To prevent your work from stalling at any stage, it is better to play it safe and find out in advance how much ink is left in the printer. This will help avoid unexpected failures and loss of time due to refilling cartridges and reconfiguring the entire system for a repeat operation.
Determination of ink remaining in LED and laser printers
You can begin to worry if there is a visible deterioration in the quality of document printing. But it may not always come to this. In color printers, the device may stop working if only one ink container is empty. The fact is that some colors are achieved by mixing different dyes. So the print quality indicator can be confidently used only where single-color printing is present - in black and white text documents. And even then, only experience will tell you how many more sheets you can print.
Advice! If print quality deteriorates, you remove the cartridge and shake it thoroughly for a minute, then evenly distributed toner will allow you to obtain printed sheets of acceptable condition for some time.
To more accurately determine the remaining paint in containers, there are various ways checks.
Using software
Windows OS does not have universal method checks. You can determine the ink level in the printer by if only the model has this option. Then on your computer through the “Control Panel” you need to enter “Devices and Printers”. Then you should select the required connected device and open the “Service” tab in it, where the approximate amount of remaining toner will be displayed. In some cases, such information may be in the “Printing Settings” tab.
There is a way for MAC OS owners. If create a printer shortcut on the desktop, then using it you can not only speed up the printing of documentation, but also see the state of affairs in the paint bins. The path is as follows: Settings → Features → Ink level. You can place the icon on your desktop from Utilities. You need to find the “Printer Settings” utility there, run it and, having found your device, select “Printers - Create a printer on the desktop...” from the menu.
Important! For most devices there is an additional software in the form of drivers or utilities that allow you to check the level of ink or paint.
For example, for owners of products from Hewlett-Packard (HP), there is not only a support service, but also a special application, which allows full diagnostics devices. Similar programs available for models from Brother, Epson, Kyocera, Pantum, Xerox and Samsung brands. Such applications are called service applications, and they can perform both complex functions and narrowly focused ones - checking the toner level.
By printing
Often, the printer itself can print a test page, which will contain all the information about it, including information about the toner status. Usually diagnostics using printing are done via a computer. In the “Control Panel” you need to find “Devices and Printers”. Having selected the connected device, follow the path: “Management” → “Settings” → “Service”. IN last tab and should be sought the right command, which will print a sheet with information about the condition of the paint.
You can visit the info page print using the printer itself. But there are many ways, and they are slightly different from each other. Below is an example specific models An algorithm of actions will be given that will help you perform test printing on many device samples from different manufacturers.
- In the model menu HP LaserJet Pro M1132mfp There is a “Reports” item. By clicking on the “Demonstration” sub-item, you can get the desired result.
- For those models that have a “Print Screen” key, like Samsung ml-2160, this button is pressed. After 10 seconds the indicator will flash green. And after another 5 it will light up evenly. When you release the button, the report will print.
- If you open and close the cartridge cover five times in standby mode, the printer will print a test page. It works for the model HP LaserJet P1102 and almost all samples from Canon, except Canon lbp 2900.
- At the printer Samsung SCX-3200 status report Supplies can be obtained by holding the Stop button for more than 4 seconds. And the more advanced model SCX-4200 will provide information through its menu. You need to find the “Reports” item and give the print command in the “System Data” sub-item.
So, trying various combinations can be achieved desired result in working with various models.
Using the display
This is perhaps the simplest and quick way checking the ink level status, but it is fully implemented only in the most modern models. Many types of printer equipment do not have a display, and the signal that the ink has run out occurs by flashing the indicator. But, as a rule, this common signal, which determines any malfunction of the device.
The process becomes clearer for models with a simple screen. It displays information in the form of codes and, having previously studied the instructions for the device, you can understand what exactly the device is signaling. For example, that There is little toner in the bins, the code will say E3. Some early advanced models, as well as expensive models released relatively recently, have displays that can display information on entered queries in full.
By external inspection
If there is no screen and it is impossible to check the paint level programmatically, you can use the old “old-fashioned” method: check visually. To do this, simply open the front cover and if the ink is in transparent containers, then you can easily assess its level.
Advice! If the cartridge is opaque, you can determine the amount of toner by weighing it. But in this case, you need to know the mass of the full and empty sample in order to calculate the difference and approximately determine how many sheets of paint will still be enough for.
Focusing on the page counter is not always relevant. Information will be reliable only in cases where if original chipped cartridges are used. And if you force the counters of printed sheets to zero, the data may not be accurate, and the toner may run out earlier than the calculations show.
Determining the remaining ink in inkjet printers
Despite the earlier release inkjet printers Regarding laser ones, they continue to be popular. IN given time they have enough of their own adherents, and manufacturers continue to actively improve the devices. So, all modern samples must include software disk.
Installing software on a computer allows you not only to manage all the work printing device, but also with the help of applications to carry out a complete diagnosis of it, including viewing the remaining amount of ink. For example, when connecting devices from HP, programs are installed automatically and are registered in all lists.
But there is also universal programs, which allow you to work with literally all brands from many manufacturers. An example is Status app Monitor. Developed by Canon, it is also used by other brands such as Epson.
Important! Self-refilling of cartridges is not encouraged by many brands. Therefore, the included software may not work in such cases. Warranty obligations are also automatically terminated.
To understand how much ink is left, the most convenient way is use an external display, which most are equipped with modern models inkjet printers. Just use the settings key and select the “Ink Levels” function, and the entire necessary information. Also no one canceled external inspection of ink bins. Moreover, in inkjet machines they are all transparent, which makes it easy to check the level of dye and make calculations about further work.
For fans wireless technologies it will be interesting to know what is planned to be developed mobile application for smartphones, which will remotely show how much paint or ink is left in the printer. In the meantime, it’s better not to forget to use all the already known methods so as not to jeopardize the completion of important work.
The most reliable printers according to buyers
Printer KYOCERA ECOSYS P3045dn on Yandex Market
Printer KYOCERA ECOSYS P2040dw on Yandex Market
HP printer Color Laser Jet Enterprise M553n on Yandex Market
Printer Canon i-SENSYS LBP212dw on Yandex Market
Printer KYOCERA ECOSYS P5026cdw on Yandex Market
The 21st century can rightfully be called a period of modernization of society. Today we have a large number of gadgets and devices that make our lives much easier. We can carry a calculator, a notepad, a pager in our pocket, carrier pigeon, library and thousands of discs with audio recordings. How is this possible? No, scientists have not created pants with dimensionless pockets, it’s just that all these functions have been available in every smartphone for a long time.
In general, in my opinion, people are very lazy, but this is not bad, quite the opposite. It is laziness that drives progress. We want to simplify our lives, and therefore we invent objects that will help us with this. One such important and necessary item that makes our life much easier is a printer.
A printer is not a luxury, but a necessity
A printer has become a must-have attribute of every office and home. Long gone are the days when abstracts and reports had to be written manually. This wonderful device can do this for us today. Basically, the printer is very easy to use, but all users of the last century had one big inconvenience - the inability to control the ink level in the cartridges. Manufacturers heard them, and therefore modern printers are equipped special systems monitoring ink levels, which we will talk about today.
After printing a large volume of sheets, everyone has a normal desire to find out how much ink is left in the cartridges. You can, of course, open the printer, take out the cartridge, and try to shake it or measure the weight to roughly determine how much ink is left in it. But this is terribly inconvenient! Today new technologies have made possible use cartridge and entire printer systems with the ability to electronically monitor ink levels. But each manufacturer has patented its own method. Let's take a closer look at them.
Epson
This company is one of the most popular and popular. Not only thanks good quality And affordable price, but also sophisticated ink tracking technology. Printers of this brand use special original cartridges, which are equipped with chips. It is with their help that the printer cartridge is able to read information about its fullness and display accurate data on your screen as a percentage. It's really very convenient. All you need to do is go to the printer properties and click on the ink level tab.
Canon
This is the first company that is in greatest demand among professional photographers and people who have to print a lot and with high quality. She's in a slightly different place price segment than Epson brand printers. Canon also cared about their customers and patented their system. All cartridges in these printers have a small rectangular hole through which the laser passes. This is what allows you to determine the ink level. As soon as it becomes critical, the printer will immediately give you information about this. Also, at any time you can see the ink level as a percentage on your computer monitor.
HP
HP is the third most popular printer manufacturer. The cartridges are designed in such a way that they constantly monitor the pressure inside. Whenever there is a change in values, which can only happen if paint is lost, they convert that value into a percentage and display it to you on the screen. The technology is also quite well thought out, although, in my opinion, not as advanced as that of previous manufacturers.