How to check the MTS satellite TV converter unit. Settings for satellite TV from MTS


I want to watch TV with pleasure. This requires not only good transfer or film, but also excellent image quality. Cable TV does not work everywhere, so today there is an alternative that provides the opportunity to watch many broadcast channels even in the most remote corners of the country. So you can watch satellite TV and enjoy beautiful picture. Due to the variety of suppliers, it is possible to choose suitable operator. How to set up satellite TV from MTS yourself will be discussed in this article.

To install and configure satellite television in the MTS system yourself, you need attention and certain knowledge, otherwise the equipment can be damaged. First you need to check the connectivity, that is, determine whether your region is within the coverage area, and also whether there are any obstacles to installing the antenna, for example, a tall tree or a house. In addition, before installing and configuring the antenna, you need to make sure that you have purchased a kit with all the necessary elements.

So, setting up MTS satellite TV includes the following steps:

  1. Select a location to mount the satellite dish where it will have direct visibility of the satellite.
  2. Assemble the antenna according to the instructions that came with it.
  3. Install the bracket for fastening the equipment as firmly and reliably as possible in the selected location.
  4. Attach the plate to the bracket according to three parameters: rotation, rotation and tilt.
  5. Connect the MTS set-top box and set up satellite TV using the installed mobile application online.
  6. Check the signal strength in the “Antenna Settings” section on your TV.

At this point, setting up MTS satellite TV yourself is considered complete. If any problems arise, admin will answer all questions. And then read more detailed information connections.

Antenna installation process

Reception quality satellite signal depends directly on the correct configuration of the antenna from MTS. Simply buying a set of devices and materials and setting up a plate is not enough. You need to choose the right direction to the satellite, connect the receiver, and make certain settings.

First you need to decide on a place. The satellite dish must face south. It's good when the windows face south. The main thing is that there is no tall building or tree nearby that will block access to the satellite. Otherwise, you will need to remove and install the plate on the roof of the house. Next, bolt the bracket and the plate itself to it. In this case, it is necessary to use not all the bolts at once in order to be able to adjust the desired degree of tilt angle of satellite TV from MTS. The next step is to attach the converter, which must also be rotated to the desired degree.

An important task is to configure the receiver head yourself. The equipment will not work correctly if it is turned even slightly away from the satellite. Set up a satellite dish from MTS yourself in in this case possible in three ways. Using a smartphone will help you complete a task using installed application SatFinder, indicating the name of the satellite in which you can calculate the required tilt and rotation angles. The second way is to use the MTS website in the “Satellite TV” section, then “Settings”, and then “coverage map”, “Setup Wizard”. The last method will help after installing the set-top box in the “Settings” menu. To set up the MTS antenna as quickly as possible, watch the video with instructions.

Necessary equipment

The set of equipment from MTS for installing satellite TV is as follows:

  • antenna;
  • Cam module or set-top box;
  • converter;
  • bracket;
  • 2 °F connector;
  • coaxial cable;
  • set of screwdrivers and keys.

In addition, you may need a plug, and also, if connecting two TVs, a divider.

Receiver setup

In order for the setup of MTS satellite televisions to be successful, you need to configure the receiver. Connecting a TV set-top box requires connecting the antenna cable using HDMI cable into the TV socket. To completely complete the satellite TV setup and connect the receiver, you need to follow these steps:

  1. Insert the SIM card into the slot provided for this purpose.
  2. Turn on the set-top box and wait for the equipment analysis to complete and the 3G signal to initialize.
  3. Authorize the device using methods that will appear on the TV screen, usually this is a call to the call center or sending an SMS, in some cases the service will be carried out automatically.
  4. Create and save a user profile. At this stage, in the “Access Level” section, you can set the age threshold and change the password.
  5. Scan available channels.

TV module

To configure the module, you will need the following steps:

  1. Unplug the TV.
  2. Connect to it antenna cable via the connector marked SATELLITE.
  3. Install the TV module into the CI port.
  4. Install a smart card in the TV module so that the chip on it points towards the TV image on the sticker.
  5. Turn on the TV.
  6. Go to the mode of viewing satellite TV from MTS, set the necessary parameters.

Settings for satellite TV from MTS

The MTS TV set using the STB Dune HD TV 251-S2 set-top box does not require any additional settings channels, everything will be done automatically. Manual settings will be required when using CAM module Verimatrix. In this case, the satellite must have the parameters 75.0E ABS 2 MTS TV, the polarization is vertical linear, the position is 75° E., the module type is DVB-S, DVB-S2, QPSK, 8PSK, the speed is equal to 43 or 45 Msymb/ sec, and FEC – 5/6, 2/3.

Manual channel tuning

What settings are needed to watch channels? Manual settings are only needed for the CAM module. To do this, use a list of frequency ranges and transponders.

Features of connecting to MTS satellite TV

The satellite, thanks to which channels from MTS are broadcast, has a wide coverage area. This operator covers the territory of Russia by 90%. Main feature The provider is focused on the quality of the received signal and image quality, the number of channels fades into the background. For some channels there are several versions of standard time. For example, if you did not have time to watch a movie or program at one time, then on this channel you will be able to see it on this channel, only in a different time zone.

Registration in your personal account for MTS satellite TV

Your personal account on the MTS website allows you to get many privileges. To register, you need to select the “My MTS” button, which is located on the right top corner site, and then decide on the necessary section of satellite TV. To register, you will need to enter your contract number and passport details. Such actions in the future will make it possible to manage services, view payment history, make settings, view the current tariff plan and change it, pay for the service, find out the remaining traffic and more.

The satellite television operator MTS appeared quite recently, but is already loved by subscribers due to the low cost of connection, a large list of programs and inexpensive subscriber services. But the stability and reliability of the system depends largely on high-quality installation and qualified configuration.

Visibility in a south-eastern direction and a clear horizon are the main conditions for connecting an MTS television set.

The channels are supplied from the ABS 2 satellite, hovering at 75 degrees East longitude. To view programs you will need:

  • Antenna size 60-90cm.
  • Linear converter.
  • Coaxial cable.
  • Connectors.

Moscow and the Moscow region are in the zone confident reception satellite Standard size antenna is 60cm. By increasing the dish to 80-90cm, it will be possible to achieve stable signal reception in bad conditions. weather conditions: snowfall, rain, cloudiness. The section "Coverage map" presents the signal distribution throughout the Russian Federation and indicates the reception power in each region. The map will help you choose the plate size.

We will divide the installation and configuration procedure of MTS TV into several stages.

Stage 1. Determining the direction of the signal

The procedure can be performed using a compass or a program from the Internet. For a PC, DISHPOINTER is suitable; for a phone, you can use the SATFINDER program (you can find it at Play Market or App Store). The operating algorithm is as follows: enter the address of the installation location, select the name of the satellite (ABS 2 75EAST) and using the colored arrow the signal from the satellite will be shown relative to the connection location.

If we choose a compass, then we focus on the southeast. The program shows a more accurate signal direction superimposed on a map of the area. Depending on the direction of the signal beam, the antenna can be installed either from a building window or on the roof. Tall buildings and trees located at the level of the dish can interfere with reception. You can also navigate by the sun: around 10 o’clock in the afternoon it shines in the direction of the satellite.

Attention! Only a specialist, after visiting and measuring the signal, guarantees satellite reception! The cost of the service is 1000 ₽.

For independent measurements, we use a satellite set-top box, which has a scale for the level and quality of reception.

Stage 2. Assembly and installation of the satellite system.

We assemble the plate and install the converter on it, strictly following the attached instructions. We attach the bracket to the vertical wall of the facade or the roof of the building. Installation to brick and concrete surfaces is carried out using M10 anchor bolts, to wooden surfaces - 10mm screw caps. When there are voids in the wall, a through hole is drilled and studs are installed.

The antenna is mounted on a securely fastened bracket so that the dish is difficult to rotate on the support. We measure the required length of the cable, strip it as in the photo, and install the connectors. We pay careful attention to the cable braid: it should not come into contact with the central core.

We align the antenna in the direction of the satellite (use the program) or in azimuth (direction to the satellite in the horizontal plane) and elevation (the angle between the horizon line and the direction to the satellite in the vertical plane). Data for the Moscow region: azimuth: 137.3°, elevation angle: 18.3°. We find information for your region on the GEONAMES map.


Stage 3. Setting up the antenna for the satellite​ ​

This operation can be done using a sat finder or receiver. Recommended MTS receivers have a signal level and quality scale adjusted to the desired frequencies. Channels can also be received on non-recommended devices, but then it is better to configure the set-top box in advance. This can be done when purchasing a system in a store, or from neighbors who have a working MTS dish.

Manual setting performed using the following data:

  • Satellite ABS 2 75 EAST
  • Feed settings: upper local oscillator 10600 MHz, lower 9750 MHz.
  • Transponder: 11800 V, flow rate 45000, error correction 2/3. (see list of MTS frequencies)
  • Network search- included. This will help you find the entire list of programs.

We enter the settings menu, two scales appear in front of us: level and quality of reception. Stable work satellite is possible with the maximum filling of the scales, which should not be lower than 70%.

The procedure for setting up an MTS TV dish to a satellite

  • We point the antenna at the area where the satellite is located (we focus on azimuth and elevation, according to the signal direction program).
  • We tilt the plate below the horizon by -8°.
  • We set up the converter: if you look at the feed from the antenna side, then with a positive value we turn it clockwise, with a negative value counterclockwise, to the -22° mark.
  • Slowly turn the antenna 1-2mm, wait a couple of seconds, look at the signal scales on the screen; repeat the operation until the scales begin to fill.
  • We achieve at least 70% completion of the scales.
  • Fix the plate, tighten the bolts Call an MTS setup specialist

If you were unable to set up the equipment yourself or there were breakdowns in the already connected antenna, we recommend using the services of MTS television repair and installation specialists.

Call an MTS setup wizard

If you were unable to set up the equipment yourself or there were breakdowns in the already connected antenna, use the services of MTS television repair and installation specialists.

IN: What do you need to view MTS from satellite?

ABOUT: To view you need to purchase a set of equipment which includes:

  • Antenna 0.6 cm;
  • Receiver;
  • SIM card;
  • Converter;

Despite the small diameter of the antenna, reception will be carried out almost throughout the entire territory of Russia (see coverage area). However, in places of unstable reception it is still recommended to install satellite dish with a slightly larger diameter. Unlike others satellite operators, MTS TV uses SIM cards. What allows you to use additional services (MTS bank, easy payment, etc.)

IN: Which converter is suitable for receiving MTS TV satellite television?

ABOUT: The converter included in the kit has linear polarization of the Ku-band. And if necessary, it can be replaced with any other one with the same characteristics.

Including on:
Ku converter with two outputs.
Allows you to connect two set-top boxes to one satellite dish to receive satellite TV from MTS
Ku converter with four outputs
To connect four subscribers
Quite a complete line of Ku band converters various manufacturers You can

IN: Is it possible to use the Internet from MTS TV via satellite?

ABOUT: In order to use full satellite internet, You need to purchase special equipment, such as providerKiteNet. The receiver included in the MTS TV set has a modem function and router mode, which means it distributes wireless Internet in places where 3G and 4G LTE are received. Any device that supports WiFi can connect to it. From here it becomes possible to use different internet services that will be constantly updated. Moreover, for MTS subscribers, it is absolutely free*

*"Free" - conditional concept, meaning that Internet traffic of a certain volume is already included in the annual subscription fee.

IN:What devices can be connected via WI-FI router and LAN output MTS receiver/set-top box?

ABOUT: As we see from technical characteristics MTS satellite receiver, there is a function WI-FI router. The receiver has the ability to distribute the Internet viaWI-FI, respectivelyyou can connect several devices, for example the most primitive ones: laptop, tablet, smartphone. Through LAN port you can connect your computer using a cable. And also through LAN port you can connect a router and from it several computers and more!

The most important and very impressive. You can connect a set-top box to the MTS satellite receiver DVB-T2 on Android using Ethernet adapters. But this is not the limit! Through the LAN port you can connect a number of satellite receivers on Linux, for example: Sky Vision And OPENBOX . On your satellite receiver it becomes possible to access the Internet. The Linux set-top box has a built-in browser, which you can use in the same way as on a computer, while connecting a keyboard and mouse to the set-top box. As a result, you get a whole multifunctional transformer, you just need to purchase a kit satellite equipment MTS!

IN: Residents of which regions can become MTS TV subscribers?

ABOUT: The signal of the MTS TV package is broadcast from the ABS-2 satellite, located in geostationary orbit at point 75 East longitude, and is available for reliable reception throughout almost the entire territory of Russia. Therefore, the majority of Russian residents will be able to become MTS TV subscribers. You can find out the antenna size required for your region to receive a signal from the ABS-2 satellite from the satellite coverage map. The table corresponding to the antenna diameter and gain is located.

Guarantee

Free warranty service in the territory Russian Federation any type of equipment intended for using the MTS Satellite TV service is subject to the following requirements:

  • The product has not expired
  • The equipment does not show any signs of violation of the operating and storage rules specified in the documentation supplied with the product by the manufacturer.

Service maintenance

Through the service center

The subscriber can contact one of the authorized service points in Russia, where the equipment will be replaced if a malfunction is confirmed. The list of service centers is indicated
on the website sputnik.mts.ru.

Through dealer points of sale

The subscriber can contact the dealer, where it will be accepted faulty equipment and an application for its replacement if necessary.

Service (testing/repair) is carried out in service center without the presence of the subscriber.

FAQ

Do you have federal channels?

MTS broadcasts mandatory public federal TV channels as part of the MTS Satellite TV service. TV channels are available for viewing to all subscribers of MTS Satellite TV
as part of the Basic package.

Why don’t Internet services work on my set-top box: map, weather, news?

Internet services (maps, weather, news and others) may not work due to the fact that there is no access to the Internet. To check Internet access, you need to check the connection in the set-top box menu. There are two ways to connect to the Internet on your set-top box - via wire via Ethernet from your home provider or via a 3G modem that is built into your set-top box. You can check the coverage area in your area using the link www.mts.ru/mobil_inet_and_tv/help/mts/coverage. If you are unable to set up a connection or Internet services do not work when connected to the Internet, you need to contact support and call Contact Center MTS.

Is a SIM card from another Internet service provider suitable for use on a set-top box from MTS?

The satellite set-top box from MTS will only work with the MTS SIM card that was supplied with the satellite equipment. If you try to use a SIM card from another operator or an MTS SIM card that is not intended for use with satellite equipment, the operation of the MTS set-top box will be limited.

Why is the program guide displayed without pictures?

What equipment do you need to watch satellite TV from MTS?

To receive channels you must have a satellite dish, universal converter with linear polarization and a set-top box from MTS. This equipment provided to the subscriber upon connection. This equipment can be found at local certified dealers. You can find out information about the equipment and places where it can be purchased in the corresponding section on the website sputnik.mts.ru. It is important to note that if you already have an antenna and a converter, then in some cases they can be used to receive Satellite TV from MTS. You cannot use a third-party set-top box to watch Satellite TV from MTS; for this you only need set-top boxes received from MTS.

I already have it on my TV satellite receiver DVB-S2, can I watch channels through it?

Yes you can. Your TV is suitable for receiving Satellite TV from MTS. Additionally, to decode the signal you will need a CAM module. You can find out about the availability of such modules from your dealer, on the website sputnik.mts.ru or in the Contact Center.

How does the Internet work on my set-top box?

Your set-top box has a built-in 3G module, which allows you to obtain constant access to the Internet using the MTS SIM card included in the equipment set. Additionally, you can connect an Ethernet cable from your home provider. We recommend using an Ethernet wire as a more stable connection method if your speed home internet more than 6 Mbit/s.

Does the TV box have built-in storage? If so, what can it be used for?

IN set-top box there is no built-in storage for storing recorded content, but you can connect an external USB storage device (flash drive or HDD). With a connected USB drive, you can additionally use the services of pause, repeat and record programs according to a schedule. In addition, you can view photos and videos and listen to music from your USB drive using the Media Player service on your set-top box.

How can I watch or transfer recorded shows on my computer?

Programs that are recorded to your removable USB drive are only available for viewing on the set-top box you used to record. You cannot view files on your computer or other devices. This is due to legal requirements from the rights holders of TV channels.

How does weather affect picture quality?

MTS Satellite TV is broadcast from a new generation satellite with very high level signal. But too dense cloud cover, heavy snow, and heavy rains can sometimes affect the quality of the received satellite signal. The more intense the weather events, the greater the impact they have on picture quality. Magnetic storms and solar activity also have an impact.

Is it possible to connect two TVs to one set-top box?

To connect a second TV you will need another set-top box. For more information about this connection method, please contact your dealer.

Can I use set-top boxes from other manufacturers/operators, as well as watch channels broadcast by other operators on my set-top box?

Each satellite television operator uses its own signal encoding, which makes it impossible to watch TV channels of other satellite television operators using the MTS Satellite TV set-top box. The MTS set-top box is adapted to decode a signal intended only for watching TV from MTS.

Does the TV recording function work when the TV is turned off (when the owner is not around)?

Yes, recording works when connected external media and a television set-top box connected to the power supply. For CAM module this function not available.

What is solar interference and how does it affect signal quality?

Solar interference is a distortion of the signal received from a satellite as a result of interference with the radiation of the Sun. In cases where the reception satellite antenna, the satellite and the Sun find themselves on the same line, receiving signals from the satellite is impossible - they are blocked by the more powerful noise of the Sun. At such moments, your signal may deteriorate or disappear altogether. Solar interference occurs twice a year - in spring and autumn. Depending on your geographic location, it may occur at different times, but lasts only briefly during the day and a few days per month. The time of possible solar interference will be reported in advance on the website sputnik.mts.ru.

Why am I experiencing signal interference?

Most likely, signal interference is caused by incorrect setting receiving antenna or the presence of obstacles such as houses and trees. You can configure the receiving antenna yourself using the instructions posted on the website sputnik.mts.ru. If you require additional help, you can contact your nearest dealer or MTS Contact Center.

Is it possible to return the set-top box to factory settings?

Yes, it's possible this procedure described in the operating instructions. In this case, all changes in the set-top box that were made by the user will be deleted and initial settings(default) will be installed.

How to restore the provision of a service after it has been blocked due to non-payment?

You need to top up your balance personal account. The service will resume when a positive balance is reached.

How to block a service?

To block the service, you must call the MTS Contact Center.

How to pay for the service?

Payment for services is carried out by number mobile phone specified in the Agreement. You can find out about all payment methods in the corresponding section on the website sputnik.mts.ru.

What is the form of payment for services?

MTS provides services on credit, that is, you first use the services and then pay for them. The billing period is 1 calendar month. Payment for the previous month must be made by the 20th of the current month.

Where can I find out transponder frequencies?

What are the advantages of Satellite TV from MTS compared to other operators?

Satellite TV MTS - television latest generation. For the first time, MTS opens up to you the possibilities of real interactive TV, previously unavailable to satellite TV viewers: video on demand, program guide directly on the TV screen, broadcast recording, pause and rewind function, information about programs, weather in your region, news, interesting applications and much more. Control of television viewing is carried out using a TV guide with a unique intuitive clear interface. With MTS Satellite TV you can watch over 150 of the most interesting and popular TV channels in excellent quality, including channels high resolution. MTS satellite TV is easy to connect anywhere - in a country house, in a country house or in an apartment.

Where can I purchase equipment for connecting Satellite TV from MTS?

To purchase such equipment, you need to contact our partners, a list and contacts of which can be found on the website sputnik.mts.ru.

Why is there no sound on the channels I'm watching when I connect the MTS set-top box to the TV?

If you are using the cinch cable connection method, you need to make sure that correct connection this cable to the set-top box and TV. On the set-top box, the cable must be connected to the AV connector. On the TV it must be connected to the Composite connector in compliance with the color markings of the cable and connectors on the TV.

To provide best quality sound and image MTS recommends using the connection between the set-top box and the TV via an HDMI cable if your TV supports this type of connector.

What to do if the TV has stopped showing satellite TV channels and the message “NO SIGNAL” appears on the screen?

  • First of all, you need to check that the connecting cables of the set-top box are connected correctly.
  • Next, you need to check whether the mode for displaying channels and sound on the TV is correct (for a tulip cable, the mode must be AV or Composite. For an HDMI cable, the mode must be HDMI, and the selected HDMI port for connecting the set-top box must correspond to the selected HDMI port for display on TV).
  • If all cables are connected correctly, the set-top box is turned on and the correct mode is selected on the TV, you need to check the antenna cable for damage and its connection to the converter installed on the satellite dish.
  • Try rebooting the power supply. To do this, put the set-top box into standby mode (by pressing the POWER button on the remote control) and disconnect the power supply from electrical network. To reboot correctly, the set-top box must be turned off for more than one minute.
  • If all previous checks do not bring results (it was not possible to identify the reason for the lack of signal), then to continue the diagnosis you must contact the Contact Center.

Why are some services listed in the subscriber directory not available to me?

We are constantly working to improve the functionality of our subscribers' TV set-top boxes. You will receive regularly automatic updates software your console,
With each update, all new services will be available. This is very simple procedure. The set-top box itself will tell you when and what to press on the remote control to update the functions. Follow updates on our website

Equipment for digital television- this is what you can buy in our store. Our company has been operating in the market of broadcast and satellite equipment since 2003 and we already know most of our clients by sight.
For regular customers of our online store there is a system of discounts, which are calculated automatically according to the coupon number assigned to you personally.
All equipment undergoes pre-sale preparation, namely installation latest version Software for satellite and broadcast consoles. All receivers are tested for functionality.
Our company delivers equipment both in Moscow and throughout Russia. Most courier delivery companies have agreements on preferential delivery prices.
In our online store you can find almost any equipment that you may need to receive satellite and terrestrial television. We have tried to make the ordering process convenient for anyone. If you plan to order not one item, but several, then you can use the store search and pay attention to the accompanying equipment. If you want to pick up equipment for receiving satellite TV, then you should go to the tab menu " Satellite television", if for receiving terrestrial or cable TV, then " Terrestrial television" etc. If you have questions during the ordering process, you can use online chat, which is located on every page of the online store or order back call.
We hope that in the online digital TV store you will be able to spend minimal amount time to order the required equipment.


2024 gtavrl.ru.