How to put a fingerprint on the app store. How to properly set up Touch ID

Youtube

Touch ID is a technology that first appeared in the iPhone 5S, used as additional parameter security operating system iOS and user identification tool. The essence of this technology is that Home button a special biometric sensor is built in that allows you to read the user’s fingerprints and use them instead of a password to access the phone, as well as to make purchases in the App Store and iTunes Store.

As mentioned above, Touch ID was first introduced in the iPhone 5S, but it is expected that this year the biometric sensor will appear in new iPads Air and iPad mini, and, of course, in the new iPhone generation, which is expected to appear in the second half of 2014. At the same time, most likely, the new devices will also use a new generation of the Touch ID 2 sensor with improved recognition technology and, possibly, support for additional functions.

How to set up Touch ID

If you just bought a device, then by going through the standard activation procedure when you first start it, you can immediately tune Touch ID. To register a fingerprint and enter it into the Touch ID database, several steps are required. simple steps. Let us immediately note that the device can store up to 5 fingerprints, which are stored in a special memory compartment of the central processor.

1. Before immediate setting up Touch ID, we recommend that you thoroughly wash your hands and, most importantly, your fingers, and also thoroughly wipe the Home button on the device, because... It is the Touch ID sensor that is built into it. Only after this you can start setting up.

2. Before setting up the Touch ID sensor, you need to come up with and enter a four-digit number, or complex password. It will be prompted if Touch ID fails to recognize your fingerprint.

3. Hold your iPhone the same way you normally hold it when pressing the Home button. Place your finger on the Home button and hold it until you feel a slight vibration or until the system tells you that you can remove your finger. Don't press the button too hard, just tap it lightly.

3. After the initial scan, the recognition system will ask you to change the position of your finger to complete the scan. Hold the phone as usual and touch the edges of your finger so that the system can fully recognize the fingerprint.

How to set up Touch ID if your device is already activated

You can configure the Touch ID sensor and save fingerprints in the processor memory, if the device is activated, through the main settings. To do this, go to Settings and select "Touch ID and password" in the main menu. Next you need to select “Fingerprints”. Then the system will offer the procedure for registering and saving fingerprints already described above.

Use Touch ID instead of entering a password and for App Store purchases

Once you've set up Touch ID and stored your fingerprints in your iPhone's processor, you can use your fingerprint to unlock your device (instead of entering a password) and as a means of authentication when making purchases in the App Store and iTunes Store.

To unlock iPhone with using Touch ID, wake up the device from sleep mode by pressing the power button or home button. After that, gently move your finger to the Home button without pressing it, and the phone will unlock.

If Touch ID fails to recognize the fingerprint within three attempts, you will be prompted to enter the password that was set when setting up Touch ID. It is also worth noting that the Touch ID sensor is disabled and a password is required if:

1. The device turned on after rebooting
2. More than 48 hours have passed since the device was last unlocked
3. You want to go to the "Touch ID and password" item in the device settings

To use Touch ID as your account ID Apple records ID(to make purchases and downloads in the App Store and iTunes Store), you need to go to settings, select "Touch ID and password" and activate the "iTunes Store, App Store" item there.

Gently place your finger on the Home button and the purchase will be completed. Please note that you will be prompted to scan your fingerprint every time you try to download content from the App Store or iTunes Store. If the sensor fails to recognize the fingerprint within 5 attempts, you will be prompted to enter a password account Apple ID.

How to improve Touch ID performance

Some users using the Touch ID sensor have complained that the system does not accurately recognize their fingerprints. There are a couple of simple ways to increase the accuracy of your fingerprint identification using Touch ID.

1. Touch ID processor memory can store up to 5 fingerprints. To make recognition of the finger used to unlock the device more accurate, you can do the following: assign the same fingerprint to different memory slots. That is, in essence, you need to “scan” one finger several times, as if they were different fingers. Thus, the accuracy of your fingerprint recognition can increase to almost 100%!

2. Keep the Home button clean so that it is free from dust or moisture. The accuracy of fingerprint recognition directly depends on the surface of the sensor, so, naturally, if there is grease, dust or dirt on it, the accuracy of fingerprint recognition is noticeably reduced.

3. Check that the latest version is installed on your device software- Apple may program level make changes and improvements to the built-in iOS functions. So, for example, in iOS versions 7.1.1 officially introduced improvements to Touch ID, making fingerprint recognition more accurate and smoother.

After updating the software, we recommend that you delete all registered fingerprints and add them again to make Touch work ID is as accurate and convenient as possible.

Set up iPhone in a service center

No problem! If you want to comprehensively customize your new iPhone, transfer data from an old phone to a new one or install applications, you can always count on the help of our specialists service center. You can read more about the services we provide on our website by clicking on the link - "

After iOS updates fails or fails to complete touch setting ID? This guide contains the most common Touch ID problems and their solutions to help you.

If problems with Touch ID started immediately after updating to new version iOS, you may need to roll it back. While you have a chance, either stay with the problem until the next update comes out. We have seen that some iOS updates introduce bugs and subsequent ones fix it.

Although it may seem like the problem is with Touch ID, there is a reason why your iPhone more often asks for a password after updating. If you haven't used your passcode in six days, and haven't entered Touch ID to unlock your phone in eight hours, you'll be prompted to enter your passcode. This Apple rule, and it is installed for your safety.

How to fix the problem of unable to activate Touch ID on iPhone?

Regardless of whether you initially installed incorrect settings Whether Touch ID is becoming unreliable over time, there are all sorts of reasons why Touch ID on an iPhone or iPad may not be able to recognize your fingerprint as well as it used to, or as it should. Sometimes in such cases it is best to start over.

Unlock your iPhone or iPad and set up Touch ID again to fix most issues. Before doing this, make sure there is no dirt or sweat on the Touch ID sensor and dry your hands.

Step 1: Settings → Scroll down and tap on Touch ID & Password.

Step 2: Then enter your password and turn off the features " Unlocking iPhone" and "iTunes and App Store".

Step 3: Press the Home button to return to main screen, and then restart your iPhone by pressing the Power off button.

Step 4: Settings → Scroll down and tap on Touch ID & Password. Enter your password.

Step 5: Turn on iPhone Unlock and iTunes & App Store features.

If you couldn't complete Touch iD setup by the above method, turn on the "Open with your finger" function. To do this, follow the steps below:

Step 1. Go to Settings → General.

Step 2: Click Accessibility.

Step 3: Select Home.

Step 4: Turn on “Open with finger.”

After that, restart your phone and check if the “Touch ID setup cannot be completed” error is fixed.

Recalibrating the Touch ID sensor

The easiest way to fix Touch ID errors is to recreate your fingerprint on your iPhone. Behind Last year iOS updates did a great job which fixed most touch errors ID including "Can't set up Touch ID" and there are also general performance improvements on iOS 8 and above.

This may help if your fingerprints have changed slightly over the past few months due to wear, dry skin, etc. To do this you need to follow these simple steps:

Step 1: Launch the Settings app and open Touch ID & Passcode, enter your password when prompted.

Step 2: Select the fingerprint you are having trouble with, then click the Remove Fingerprint button.

Step 3. Click the “Add fingerprint...” button to begin rescanning the removed finger.

Step 4: Place your finger on Touch sensor ID in different ways - from right to left, top to bottom and sideways until the fingerprint icon is completely colored.

Step 5: When asked to adjust your grip, scan the edges of that finger until the fingerprint icon is fully colored.

Note: Scan the front back and the sides of this finger in the way that you think you will use to unlock it if the grip is not the most comfortable.

Step 6: Click the Continue button when the process is complete to save your fingerprint.

Lock your device and make sure the fingerprint works; Congratulations if everything worked out! If not, reboot your device according to the instructions below and check if the problem is resolved.

Force a device restart

The next course of action is forced reboot. Hold down the Power and Home buttons simultaneously for about 10 seconds and release when you see Apple logo. These instructions are intended for owners of iPhone 6 and previous models.

For owners of iPhone 7 and 7 Plus, you need to hold down the “Power” and “Volume Down” buttons, and for new iPhone phones X. First press volume up, then volume down and hold the “Power” button for 10 seconds. Otherwise the process is the same.

After rebooting, your fingerprint should work fine.

If after following these steps to recalibrate Touch ID, you still can't unlock iOS device using a fingerprint, there may be something else present besides iOS errors. Take these troubleshooting steps:

Wipe touch sensor ID microfiber cloth to remove fingerprints and dirt.

Use another finger; Perhaps the finger you are trying to use does not have a clearly visible imprint.

Note: according to reviews, many iPhone owners We're facing the "Touch iD setup can't complete" issue. Official support Apple says it's a hardware issue and you should either replace the Home button (or screen + Home button) or replace the entire phone.

Conclusion

If the Touch ID issue continues to plague your device, you should either wait for the next iOS update or you should contact Apple for help. Also, if your iPhone is still under warranty, contact an official Apple service.

In all current models On iPhone you can find such a function as Touch ID. Many people don’t use it and don’t even know what it is.

Therefore, today I will tell you why you need to use Touch ID on your iPhone and what it actually gives. The article will be very short, but interesting.

Touch ID function on iPhone

I would like to start the history of this function with the fact that it appeared back in 2013 along with the legendary iPhone 5S. Then the letter S meant “Security”, which was implemented using touch ID.

There were so many memes circulating that now iPhones would be stolen along with their fingers. Yet, many years later, everyone adores him.

Touch ID is a fingerprint scanner in Apple devices that is built right into the Home button. Using it, most often you can unlock your smartphone or make purchases.

In the first models, the technology was crude and broke down quite often. But the big disadvantage is that changing it is not so easy, because the button is tied to the device’s processor.

Among the global advantages of using, we can name the following advantages:

security of your data after losing your device;
quick device unlocking;
Convenient shopping in any store.

Today we have this technology in version 2.0 and many cannot even imagine their life without it. After all, it’s so convenient and quick to unlock your gadget.

How to set up Touch ID on iPhone 5S, 6, 6S, 6 PLUS, 6S PLUS, SE, 7, 7 PLUS?

Many people think that setting up Touch ID on an iPhone or iPad is super complicated. But you shouldn’t be afraid of this, and now we’ll look at the whole process as a whole.

Let me start with the fact that even if you have an old iPhone 5S, then it also makes sense to do this procedure on it. So let's get started:

let's go to Settings — Touch ID and passcode;
we see Add a fingerprint and place the desired finger on the Home button;
when the scanning is completed, then we do the same procedure, only with the edges.

Now the fingerprint is added and you can add as many fingers as you need. Most often, three pieces is enough. After all, you can cut yourself and so on, but don’t forget that there is a password.

In the same menu of this function, you can choose what exactly you want to use this functionality for. There are really only two options:

Unlock iPhone;
iTunes Store and App Store.

This is purely your preference. If the first point should be by default, then the second is really optional. The second point may be useful for paid games to avoid entering a password.

conclusions

As you can see, the Touch ID function is not that scary. Now you know what it is intended for in your device and what it is.

Setting up is also simple. Apple usually tries to simplify the process as much as possible, so you can always find a bunch of tips on what exactly needs to be done and in what order.

The iPhone 5S debuted biometric Touch ID sensors. After that this technology began to appear on all subsequent mobile gadgets of the company.

Constant additions have turned the fingerprint scanner into a reliable tool for protecting access to both mobile device, and to applications. Now Touch ID is an integral part payment system Apple Pay. However, this tool does not always work the way users want: there are errors in recognition and malfunctions.

In this article we want to tell you how to calibrate and configure Touch ID to the current ones. this moment iPhone 6 and 6 Plus, as well as iPad Air 2 and mini 3. We believe that this article will be relevant for subsequent Apple products.

Setting up Touch ID using the iPhone 6 as an example

Configure the settings on other gadgets in the same way. Let's get started.

First of all, we erase all fingerprints in the memory.
Then you need to restart your smartphone, first ending all active applications.
Then go to “Settings” - “Touch ID and Password” and here, at your discretion, enter a password.
After this, a menu opens in which the user’s fingerprints are stored.

Increase

You need to be especially careful at this step. The phone should be held in its normal position. You should not make any more transitions or manipulations, but simply touch the scanner in the same way as is done to unlock the iPhone screen.

If a finger that the system already knows lingers on the sensor, it will be highlighted in the list of fingerprints. Now it will be the standard for this finger and an additional scan has just been carried out. iOS system saved the result on the chip in a protected area. Up to five fingerprints can be stored here. Each fingerprint can be assigned a unique name (if several people will use the gadget).

Increase

All these simple manipulations train Touch ID and additional data from the user’s fingerprints is transferred to it. In the future they will be used for unlocking. It takes about 5-7 minutes to scan and save your fingerprints well and thoroughly. You need to put your finger on the button while being in this menu at the time.

If one of the fingerprints is highlighted, this means that this procedure was carried out successfully. The device’s memory will be replenished with additional scans of the user’s finger, and the Touch ID sensor will work much more efficiently. As a result, the operation process will noticeably speed up.

Touch ID feature debuts in a generation iPhone smartphones 5S. With this function, the user has the opportunity to increase the security of the mobile gadget. The essence of this technology is the use of a built-in biometric sensor. The sensor is built into the Home button. It reads the user's fingerprint and subsequently uses fingerprint scanning instead of entering a digital password.

Apple developers promise to release the second generation of biometric sensor in the near future, which will significantly improve the performance of this function.

Setting up Touch ID.

When purchasing a new mobile gadget, you need to activate your Apple ID, after which you can set up a fingerprint scanning sensor. To do this, you will need to perform several steps, which is not difficult. The system can store a total of five fingerprints on the device.

Before you start Setting up Touch ID and fingerprint scanning, we recommend washing your hands thoroughly. Don't forget to clean the Home button as well.

Before scanning, we come up with and enter any complex four-digit password. This password will be requested if the Touch ID system for some reason cannot recognize the previously saved fingerprint.

Take yours mobile gadget in the same position as you would normally press the Home button. Next, place your finger on it and hold until a slight vibration appears. The system will inform you that your finger can be removed from the scanner. Remember not to press the button too hard.

Next, the system will ask you to change the position of the finger being scanned, which will allow you to get the maximum high quality image fingerprint. Apply the edge of your finger to ensure the highest quality scanning possible.

Setting up access when the device is already activated.

If your device is already activated, you can Setting up Touch ID through the main settings. To do this, go to the menu item and select Touch ID. Next, you need to select the appropriate Fingerprints item and carry out the procedures described above for saving and registering fingerprints.

Use Touch ID to make app store purchases.

This function is optimized with the application store, which allows user identification using fingerprint scanning.

To unlock a mobile gadget using the Touch ID function, you need to place your finger on Home. Remember that you do not need to press the button itself to unlock your smartphone.

If, when trying to read your fingerprints, for some reason you were unable to unlock your mobile gadget, you will need to enter the password manually. Please note that the fingerprint sensor is disabled and requires manual entry password in cases:

When rebooting the device.

In the event that the last unlocking was carried out more than 48 hours ago.

When you deactivate Touch ID in Settings.

If you want to use a previously saved fingerprint to activate your Apple ID entry, you need to go to Settings and activate the iTunes Store item.

Subsequently, when downloading a video or various programs the system will prompt you to scan your fingerprint.

We need to perform a scan, after which the content you need will be downloaded. IN in this case Fingerprint recognition is performed in a maximum of five attempts.

Improving Touch ID performance.

In some cases, users may complain about incorrect scanning and recognition of the fingerprint system. We offer you enough simple ways increasing the accuracy of the fingerprint recognition system.

The system memory can store a maximum of five fingerprints. To make the system easily recognize the user, you can set the same fingerprint for different slots. To do this, you need to scan your one finger as if you were scanning multiple fingers. In this case, the recognition accuracy increases significantly.

It is necessary to ensure the cleanliness of the biometric scanner. Therefore, periodically clean the Home button from dust and moisture. If there is dust, grease or dirt on the sensor surface, the recognition accuracy is noticeably reduced.

By installing the latest version of the software, you can significantly improve the accuracy of fingerprint recognition. Latest version The operating system is optimized to work with the Touch ID function.