How to change trendnet to Russian. Lesson on setting up a router


Good afternoon.

Day by day, a router to create a home local Wi-Fi networks are only becoming more popular. And it’s not surprising, because thanks to the router, all devices in the house are able to exchange information with each other, plus access to the Internet!

In this article I would like to focus on the TRENDnet TEW-651BR router and show how to set up Internet and Wi-Fi in it. And so... let's begin.

Setting up a Wi-Fi network

The router comes with a network cable for connecting it to the computer's network card. There is also a power supply and user manual. In general, the delivery is standard.

The first thing we do is connect the output from the router to the LAN port (via the cable that comes with the kit). network card computer. As a rule, a short cable is included with the router. If you plan to place the router in a non-standard way and far from the computer, you may need to buy a separate cable in the store, or run it in the house yourself.

Connect your Internet cable provided by your provider to the WAN port of the router. By the way, after connecting, the LEDs on the device body should start flashing.

Please note that on the router, on the back wall, there is special button RESET - useful if you forget passwords to access the control panel or want to reset all settings and parameters of the device.

The back wall of the TEW-651BRP router.

After the router has been connected to the computer via network cable (this is important, because initially the Wi-Fi network may be completely turned off and you will not be able to enter the settings) - you can start setting up Wi-Fi.

Visit us at: http://192.168.10.1(default address for TRENDnet routers).

Enter the password and login admin in small lowercase in Latin letters, without any periods, quotes or dashes. Next press Enter.

If everything is done correctly, the router settings window will open. Go to the wireless settings section Wi-Fi connections: Wireless->Basic .

There are several key settings here:

1) Wireless: be sure to set the slider to the Enabled position, i.e. This turns on the wireless network.

2) SSID: here enter the name of your wireless network. When you look for it to connect on a laptop (for example), you will be guided by this name.

3) Auto Channel: as a rule, the network is more stable.

4) SSID Broadcast: set the slider to Enabled.

After setting the basic settings, you still need to protect Wi-Fi network from access outside users. To do this, go to the section: Wireless->Security.

Here you need to select the authentication type (Authentication Type), and then enter a password for access (Passphrase). I recommend choosing WPA type or WPA 2.

Setting up Internet access

As a rule, in this step we are required to enter the settings from your agreement with the Internet provider (or the access sheet, which usually always comes with the agreement) into the router settings. In this step, it is unrealistic to analyze all the cases and types of connections that different Internet providers may have! But it’s worth showing in which tab to enter the parameters.

Go to the basic settings: Basic->WAN (translated as global, i.e. Internet).

Every line in this tab is important; if you make a mistake somewhere or enter the wrong numbers, the Internet will not work.

Connection Type - select the connection type. Many Internet providers have a type (if you select it, you will only need to enter your login and password to access), some providers have access, and sometimes there is a type such as DHCP Client.

WAN IP - here you also need to know whether an IP will be given to you automatically, or you need to enter a specific IP address, subnet mask, etc.

DNS - enter if required.

MAC Address- every network adapter has its own unique MAC address. Some providers register MAC addresses. Therefore, if you were previously connected to the Internet through another router or directly to the computer’s network card, you need to find out the previous MAC address and enter it in this line. We have already mentioned how on the blog pages.

After making the settings, click on Apply (save them) and reboot the router. If everything is configured normally, the router will connect to the Internet and begin distributing it to all devices connected to it.

That's all. Good luck everyone!

TRENDNET routers are in great demand among users who need to organize Internet access in their home. The product is easy to install and provides quick access, extensive coverage area and effective protection data. Let's take a closer look at how TRENDNET TEW 651BR works.

You can configure the device without contacting specialists

  • support for various protocols;
  • LAN ports (4 pcs.);
  • one WAN port;
  • 150 Mbit/s;
  • one dipole fixed antenna;
  • IEEE 802.11n/g/b;
  • IPTV support included.

Thanks to support for WPS technology, the router can connect other Wi-Fi adapters that support WPS. To do this, just press one key.

Connection

First, read the rules for connecting your router. Before connecting the TRENDNET TEW 651BR to your computer and network, it is important to check your network card settings. This is done in the “Manage network connections” section, which can be reached through the “Control Panel” menu. By selecting the properties “Connect via local network", find the TCP/IPv4 protocol, and then review the data in this tab. Write down information about the DNS server and IP address (relevant if you use a static address), it will be useful during setup.

Having figured out the settings network card, go directly to the connection.

The router should be connected to the PC via a patch cord. In addition, it is important to connect the ISP wire to the WAN port. Having done this, you can turn on the device to the network and press “Power”.

Settings Features

All manipulations are performed through the router interface. You can get into it by typing the numbers “192.168.10.1” in your browser. Next, the system will ask you to enter login/pass, and if the device is new and no one has used it before, enter “admin” in both fields.

Using the Reset Key

It happens that we get some things from old owners. So, if the TRENDNET TEW 651BR device was used by someone before you, then it will be difficult to configure it without resetting the old settings. To return to the factory configuration, locate the small Reset button. You cannot disconnect anything from the network during the reset process! Hold this key for about a quarter of a minute, and then wait until the router reboots on its own. Only after this can you change anything through the interface.

WAN setup

In the MAIN section there is a WAN tab. Once in it, you will see a number of fields that are important to configure correctly. To have Internet access on your computer, complete the following settings:

  • Connection Type - enter the connection option provided by the provider;
  • Decide which IP address you must use under the contract. If you have a Dynamic IP, then it is important to clone the MAC address;
  • enter login/pass specified in the contract;
  • Save the new settings by clicking Apply.

Wi-Fi setup

For TRENDNET wireless setup It also runs quite quickly. Select the Wireless tab in the interface, and then go to Basic settings. Here set the following parameters:

  • Wireless - Enabled;
  • SSID - come up with a name for the network;
  • place the flag in front of Auto Chanel;
  • enable SSID Broadcast and WMM.

Besides all this, it is important to configure your security settings. You can do this if you go to the Security item. Experts recommend using WPA2 authentication type. Here you will also be asked to come up with strong password for your network. As for the Cipher Type and PSK/EAP items, it is better to select TKIP and PSK, respectively.

Port forwarding

This option is usually used to access a PC on a local network from the Internet. It is carried out by redirecting traffic from individual ports to the address of the “machine” on the local network from the external address of the router. Forwarding is needed for various multiplayer games, as well as if there is a need to deploy a server on a computer.

This option on the router is called “ Virtual servers" To configure these settings, we recommend going to the Virtual Server item located in the Access section.

The settings here should be like this:

  • select the Enable option;
  • create a name for the new forwarding rule,
  • enter a free port in the Public Port, Private Port fields;
  • Lan Server - 192.168.10.xxx (x can be any value instead);
  • select the required protocol, then add a new rule (Add).

Firmware

Updating, or firmware, router - important process, and the subsequent performance of the device depends on how you perform it. You can flash TRENDNET TEW 651BR in the Firmware section Tools interface. All you need is to download the latest firmware from the developer’s website, specify the path to it and click Upgrade. The process takes certain time, it is highly undesirable to turn off your router or PC from the network. The router will reboot at the finish line, which will mean the update procedure is complete.

Every day the number of computers, laptops and other gadgets that require free access to the Internet to function properly is increasing. To ensure a stable data flow, it is necessary good router. Modern routers are capable of receiving the Internet through a wired access point from the provider and distributing it to WiFi mode with quite a lot of coverage.

The Trendnet router is quite suitable for creating a home local network or for running a small office. If you have chosen this router and purchased Trendnet, then you just have to figure out how to connect and configure it.

First stage: installation and connection

We switch the provider cable that was connected to the computer into the router socket. Then we take the patch cord that was included with the purchase and insert one end into the computer port in place of the removed cable. We connect its other end to any of the four sockets on the back panel of the router. We install the antenna and connect the power. Now that the router is connected to the computer, the provider's cable and turned on, we can begin configuration.

Second stage: data entry

Open any browser you are used to using, for example, Opera, Internet Explorer,Mozilla. IN address bar enter the link http://192.168.10.1; Most routers have this address by default.
The Trendnet window appears on the screen and requires you to enter your login information:


Fill in:

  • “Username” - admin;
  • “Password” - admin

Third stage: configuration in DHCP or PPTP VPN modes

Let's first consider DHCP setup, in which the IP address is obtained automatically from the provider:

  • On the left side of the screen in the lists " Main"open the tab" WAN».


  • In the line " Connection Type"select our connection type" DHCP Client or Fixed IP».
  • In the line " WAN IP» leave a mark about automatic receipt IP addresses at the point " Obtain IP Automatically».
  • In the line " DNS 1" and in the next " DNS 2"- write down the server addresses and their domain names.
  • The line " DNS 3» leave unchanged.
  • In the line " MTU"You can leave what is written, or check the operating range of the router from 1350 to 1450.
  • Line " MAC Address" MAC address is personal number your computer in global network, which is assigned to all devices upon connection. You can leave it the same or change it to the MAC address of your new router - it is written on the bottom of the router case (a combination of six pairs of numbers and letters). In the same line, just below, there is a button “ Clone MAC Address» Clicking it will enter the MAC address information into the router. If you have changed the previous data to the “native” MAC address of your router, you must notify your provider about this. Call support and register your new assigned address.
  • By pressing the button " Apply» you will save the entered parameters.
  • After this, the router can reboot and will report this with the following window:

  • Pressing the " Back» returns you to continue working.

Attention! During the process of setting up the Trendnet router, such reboots may occur more than once, so we will not repeat ourselves in the future and move on to further actions on one's own.

  • In order to check the operation of the entered settings, open the section “ Status", paragraph " Device Information».

  • Here in the window " WAN"you will see information that your router contacted your provider and automatically received an IP address. This means that the computer you were currently working on is connected to the Internet, and you can already use it.

Now let's look at the second connection option in the mode
How to properly install and configure the TRENDnet router and carry out the configuration. The process begins in the same way as with a DHCP connection.

  • Open in the list " Main» tab « WAN" and fill in the lines.

  • In the line " Connection Type"Now select the connection type" Russian PPTP (Dual Access)"If you enable only PPTP, then IPTV and other local devices will not work.
  • The next field displays how to obtain an IP address from your ISP. In position " Dynamic IP"(entering the address manually) we remain if access to the Internet is possible via VPN and there is local access via DHCP. When checking the “ Static IP"We will also enter the address manually, but this may be useful if the provider has DHCP distribution local addresses doesn't work. Next you need to enter the following parameters.
  • In the field " WAN Physical" in the line " IP Address» indicate your IP address (it can be found in the agreement with the provider that was concluded when connecting to the Internet).
  • In the line " Subnet Mask"The provider's subnet mask is indicated (also see the contract).
  • In the line " Gateway» - address of the main gateway (data in the contract).
  • Next field " DNS» We also fill in the data from the contract: domain name server address.
  • In the line " Server IP/Name» is prescribed VPN address provider server. You can enter it either as a domain name or as an IP address.
  • « PPTP Account» - you must enter a name account, that is, the login that was specified in the contract.
  • « PPPT Password" - enter the password that you used to contact VPN server your provider.
  • In the line " PPTP Retype password» Confirm the entered password.
  • Field " Auto-reconnect» specifies the connection method - permanent or as needed. It is recommended to select the option " Always-on", defining continuous traffic.
  • In the line " MTU"- depending on the operation of the router, you can set from 1350 to 1450. Or you can leave maximum size – 1500.
  • In the line " MPPE Enable", since providers do not use encryption of access to the server, we recommend choosing " MPPE Encryption Length».
  • Save the entered parameters with the “ Apply».

Stage four: setting up a Wi-Fi network in Trendnet routers

In order for your router to use its full potential when operating, you need to configure wireless connection.
We begin this process in the window “ Wireless", in the section " Basic».

  • Turn on Wi-Fi module marked " Enabled"(to turn it off, you need to select " Disabled»).
  • IN " SSID"- come up with and write down the name of your local network.
  • In the line " Channel» select a channel. You can specify any number from 1 to 11, just don’t use 6, since it remains the default for most users.
  • In paragraph " SSID Broadcast" leave the network "visible" - " Enabled».
  • Save the parameters with the " Apply».

Step Five: Protecting Your Network

Even your home wireless network has great coverage. In order to prevent unwanted connections from unauthorized users, it is necessary to install access coding.

  • In the section " Wireless", paragraph " Security"Write down the encryption method.
  • In “Authentication Type” select “ WPA-Auto».
  • In “PSK/EAP” - mark “PSK”.
  • IN " Cipher Type" - it is recommended to use " Auto", (combining TKIP+AES).
  • Now in the line " Passphrase» specify the password. Use mixed case letters, numbers and symbols. There should be about 10-12 characters in total.
  • « Confirm Passphrase" - confirm the password.
  • We save the data " Apply».

That's it, your router is ready for use, the wireless network is configured and protected. Now check the connection status on tablets, laptops and mobile phones. On each device, for the first time logging into the Internet, you will need to enter the password that you wrote down during encryption.

Now access to the global network is always available, in any corner of your home and even outside its walls!

802.11n Wi-Fi router TEW-652BRU supports data transfer speeds of 300 Mbps* and allows you to view HD video streaming and download files large volumes, play online games and browse the web without any speed delays.

The package includes a “Master quick setup", which helps to connect the router in a matter of minutes. Connecting computers to a wifi network with the click of one Wi-Fi buttons Protected Setup(WPS).

Support IP-TV function ( Digital Television) and Russian protocols Russian PPPoE, Russian PPTP and Russian L2TP allow the router to work with almost any Internet provider in Russia. Optimal ratio of price, quality and excellent technical characteristics.

The built-in USB port allows you to connect printers, MFPs, external hard disks and other peripherals. Connected devices are controlled using special utility(supplied).

Configuring a computer's network card before installing a router:

Instructions for setting up the TRENDnet TEW-652BRP router.

We connect the computer from which the setup is being made and the router (any LAN port) with a cable.
In the properties of the local network connection, go to the Internet Protocol (TCP/IP) properties, check the “Obtain an IP address automatically” and “Obtain the DNS server IP address automatically” checkboxes.

Authorization.
In order to get to the router’s web interface, you need to open your Internet browser and type in the address bar http://192.168.10.1,Username admin, Password – admin(provided that the router has factory settings and its IP has not changed).

Changing the factory password.
For security reasons, it is recommended to change the factory password.
Default: Login admin, password admin.
When reconfiguring, it is also recommended to use S/N as a password for the router and wi-fi ( serial number).
In the router interface, you need to go to the tab Main, menu Password.
In the field New Password enter New Password.
In the field Confirm Password repeat the new password.
Repeat the same operation with the user password.


Then click the button Apply.

Setting up an Internet connection.

1. Connection type: PPTP
2. Place a dot next to Static IP
3. IP Address: Enter your IP address
4. Subnet Mask: Drive in the mask
5. Gateway: Drive in the gateway
6. DNS: 10.10.32.3
7. Server IP/Name: vpn.rgtsparus.ru
8. PPTP Account: Your login
9. PPTP Password: Your password
10. PPTP Retype password: Your password (repeat)
11. Auto-reconnect: Always-on
12. MTU: 1372
13. Save the settings with the “ button Apply».

Setting up Wi-Fi on the router.
In the router interface, you need to select the tab on the left “ Wireless", in the list that opens, select " Basic».
We set the parameters as follows:
1. Parameter " Wireless": mark " Enabled»
2. Field " SSID": enter the name of the wireless network. The value in this field cannot be changed.
3. Click the button below “ Apply»

Next
From the menu on the left select “ Security"and set the parameters:
1. Authentication Type: WPA-AUTO
2. PSK/EAP: PSK
3. Cipher Type: TKIP
4. Passphrase: you must enter any set of numbers from 8 to 63 in length. They also need to be remembered so that you can specify them when connecting to the network. It is recommended to use the device serial number as a key (indicated on the box as S/N ########).
5. Confirmed Passphrase: Repeat the previous point.
6. Click the button below Apply»

Good afternoon, in this article we will look at detailed instructions for setting up the trendnet tew 652brp router. Great model that supports everything known types connections. Settings this router simple, but has some nuances. In this article we will look at setting up the Internet for popular providers Beeline and Rostelecom.

Connecting the trendnet router to a computer or laptop

This router connects in the same way as other routers. The only problem is the implicit port designations. Therefore, in the figure I indicated how they are located.

If you have ever configured any router, then from this figure you will understand what needs to be done. For those who have never done this, I wrote a diagram.

  1. Insert the power supply into the “Power” connector.
  2. We insert the Internet cable (from your provider) into the “WAN” connector.
  3. We insert the short wire that came in the kit (patch cord) into any of the “LAN” ports, and the other end into the network card of the computer or laptop.
  4. The “Reset” button is used to reset the settings of the trendnet tew 652brp router. It can be used if the first time you configured the router unsuccessfully. It is necessary to hold the button with any thin object for 10-20 seconds. After that, wait about 1-2 minutes until the router reboots.

Also, after connecting, don’t forget to check the network card settings so that you receive network address was automatic. How to do this is described in detail "", indicated detailed description network card settings for Windows 7 and Windows XP

Login to the router

Now let's proceed to entering the router configuration interface. To do this, open any browser and type 192.168.10.1 in the address bar. An authorization window will appear, enter admin in the “User Name” field, and admin in the “Password” field.

Changing the default password

For safety reasons, many manufacturers recommend changing standard password on your own. My opinion on this matter is that it is extra password which you need to remember, but if you don’t trust those who connect to your network, then let’s change it. To do this, go to the point “ Password" in the section " Main" And in the “Administrator” section, in the “ New Password» — enter a new password. IN " Confirm Password"confirm the new password, so we will set the administrator password, and do the same with the “User” sections.

Setting up the Internet on the tew 652brp router

This model supports all types of Internet connections for any provider. We'll look at some of them.

Setting up a PPTP connection - Aist Togliatti, Ufanet (UfaNet)

To set the type PPTP connection you need to enter data:

  1. “Connection Type” - select Russia PPTP.
  2. In the fields “PPTP Account” - user name and “PPTP Password” - user password, “PPTP Retype Password” - password confirmation. We enter the data, it must be indicated in the contract, or call technical support.
  3. We put a dot after “Auto-reconnect” opposite the inscription “Always-on”.

Setting up an L2TP connection - Beeline, Kyivstar

This type of connection is configured in the same way as PPTP, but is a newer connection type. To configure, we will perform the same steps, only in the “Connection Type” section we will select Russia L2TP.

  1. “Connection Type” - select Russia L2TP.
  2. In the “Server IP” field, enter the address of the VPN server.
  3. In the fields “L2TP Account” - user name and “PPTP Password” - user password, “L2TP Retype Password” - password confirmation. We enter the data, it must be indicated in the contract, or call technical support.
  4. We put a dot in the “Auto-reconnect” field opposite the inscription “Always-on”.
  5. If your provider provides this type connections with a static IP address, you will need to fill in the appropriate fields.
  6. After that, click the “Apply” button.

Setting up a PPPoE connection - Rostelecom, Dom.ru.

This is one of the most popular connection types among providers. Configured by entering a username and password, and that’s it, no additional settings. Let's see how to implement this type of connection.

  1. “Connection Type” - select PPPoE.
  2. In the fields “PPPoE Account” - user name and “PPPoE Password” - user password, “PPPoE Retype Password” - password confirmation. We enter the data, it must be indicated in the contract, or call technical support.
  3. We put a dot after “Auto-reconnect” opposite the inscription “Always-on”
  4. After that, click the “Apply” button.

Setting up Wifi on the trendnet tew 652brp router

After connecting and setting up the Internet, you need to configure WiFi connection. To set up Wi-Fi, you need to go to the “Wireless” section and select “Basic”. In the “Wireless” section of the “Basic” section, put a dot next to “Enable”. Now, in the “Name (SSID)” field, indicate the one you want to see in the list network connections. And click “Apply”.

Then go to the “Security” section and select “WPA2” in the “Authentication Type” item. In the field « Passphrase: » enter the authorization key you want, but at least 8 characters and using the Latin alphabet. « Confirmed Passphrase » — confirm activation keys. And click “Apply”

The router setup is now complete. You can use your wireless network.

To illustrate the setup process, I advise you to watch the video:

Video on how to set up a trendnet tew 652brp router

.

I also wanted to add about the firmware of the trendnet tew 652brp router

First, we need the firmware file, you can find it on the official website at this link “https://www.trendnet.com/langru/support/supportdetail.asp?prod=235_TEW-652BRP”.

As it is written on the official website, do not under any circumstances update the firmware via Wi-Fi. This may lead to uncorrectable errors.

Then go to the router settings and in the “Tools” section, select “Firmware”. After that, click on the “Select file” button, select the file that you downloaded with the “.bin” extension and click the “Upgrade” button.

Wait a couple of minutes while the router performs a full firmware update. After which the process will be completed.

Good luck with the trendnet tew 652brp model!


2024 gtavrl.ru.