How to change the name of a wifi router d link. How to change the name of a Wi-Fi network (network name, SSID) on a Wi-Fi router TP-LINK, ASUS, ZYXEL

Twitter

Modern communication technologies make it possible to create home networks, uniting entire groups of computers for communication, data exchange, and so on. Their organization does not require special knowledge and large expenses. Just imagine, 10 years ago not everyone had a computer, much less the Internet, but today a private group is organized in almost every apartment. Everyone knows what it is, but not everyone knows how to set up a router and how to change the name of the WiFi network.

This article will talk about how to change the name of a home group organized using a wireless router (the so-called router).

How to enter the router settings

Before moving on to the answer to how to change the name of a WiFi network, you should warn that you should not get into the settings if you doubt your knowledge. In any case, even if you reset all the settings and messed something up, forgot your password, and so on, each router is equipped with a master reset button, which, when pressed, resets all settings to factory settings.

How to connect to a WiFi router: Video

So, in order to go into the router’s settings, you first need to connect to it. You can do this in two ways:

Wireless connection;
Fixed connection via cable.

In the first case, you will need to turn on the router and wait for it to boot. After that, turn on WiFi on your laptop and select your device from the proposed list of available access points. For example, if you are using a D-Link DIR 300 device, then by default the connection name will be the same.

In addition to the name, you can start from the signal level. It is logical that among all the available access points, your device will produce the strongest signal, since the signal source is in close proximity to the laptop.

After you have connected to the router in your favorite browser, you must enter the following in the address bar: 192.168.0.1. In the vast majority of cases, the address is the same, however, this can be checked. It must be indicated in the instructions for the router.

A stationary connection means that the computer is connected to the router using a cable. So you don't need a WiFi connection. Just turn on your computer and enter the above address in your browser. Then everything is done the same for both connections.

How to find out the IP address of a WiFi router: Video

If the address is written correctly, then you will be asked to enter your username and password as shown in the photo above. By default, the manufacturer sets the password from the factory: admin, login: admin. After this, you will have access to the device settings. It is recommended to change your username and password so that no one else can enter the settings.

Changing the name of the network

So, we have entered the router settings, but how to change the WiFi network name? Everything here is extremely simple. First you need to decide what to name your WiFi network. The name can be anything, here you are limited only by your imagination.

It is worth noting that different router models have different interfaces. It is impossible to describe how to change the name of a WiFi group for each router, so let’s look at how this is done using the example of a TP-Link wireless router model.

So, in the device settings you should go to the “Wireless Mode” tab. Below you will see additional sub-items. We require "Wireless Settings". Here the first column is “Network name”. In this column you can write any name.

This article is for those who want to change the name of the Wi-Fi network that your router or access point broadcasts. Let all your neighbors see that you are not just some boring TP-LINK_0212EB, but a MEGA-DIMON or BMW-Racer. Renaming Wi-Fi is very simple. The only inconvenience is that after changing the name, you will have to reconnect all your devices - laptops, tablets, phones - to the wireless network if you want to continue using your home Internet on them. To change the Wi-Fi name, you only need to know the IP address of your router, as well as the login and password to log into its web interface. By the way, you can perform all the settings directly if you don’t currently have a laptop or PC at hand.

How to change the name of a Wi-Fi network on a router

The name of the wi-fi network that everyone around sees is called in the language of terms SSID. In various routers, the name wi-fi is most often designated either as SSID, or Wireless Network Name. And its settings are most often located in the section with Wireless Setup.

Changing the SSID is very easy - just erase the old SSID and write a new one. For example, instead of dlink you can write Dmitriy-home. After changing the name of the wireless network, do not forget to save the router settings by clicking the Save Settings button.

Once you have renamed the wi-fi, you will need to connect to it using its new name.

Find your network's new name in the list of available connections.

WiFi network name, or SSID (Service Set Identifier) - we all come across this concept when setting up a wireless signal on a router. If , then the SSID is displayed when we select it to connect. In this post I will show you how to determine the network name. And also how to change the SSID name on TP-Link, Asus, Zyxel Keenetic, D-Link, Apple and Mercusys routers.

Word SSID in the original it sounds like “Service Set Identifier”. As the name suggests, this is a network service identifier.

What is the SSID of the wifi network?

So, SSID wifi is the name of the wireless network, its name.

By default, when you plug in the router, it automatically starts broadcasting a wireless signal and already has a WiFi network name. However, when you turn on the wireless module on your laptop or phone and try to connect, among the many available SSIDs there may be several with the same names. For example, “TP-LINK_1234”, or “TP-LINK_1234_5G” if it operates at 5 GHz. These are just your neighbors who have not changed the SSID on their Wi-Fi routers. You can recognize our network among them from the sticker that is located on the router body. It shows the wifi name and password for authorization if the network is initially protected.

For security reasons, the network name must be renamed immediately during the initial setup of the router.

How to find out the SSID of your wifi and change its name?

Beginners often ask where to get this SSID - how to find it out and where to find it? In order to see the name of your WiFi network, you first need to go to the admin panel of the router and find the wireless signal settings there. Different models may have different menu sections where these configurations are hidden. The main thing here is to understand the principle. In the wifi connection settings on the router, you can find out the SSID.

In this same section we can change the name of the WiFi network. And assign it your own individual SSID, unlike anyone else’s.

Changing the network SSID in a D-Link router

To change the network name on your D-Link router, you need to go to the “Wi-Fi - Basic Settings” section. Here you will see the column “SSID” - enter the name we need in it.

How to find out and change the SSID on a TP-Link router

Change the SSID of the WiFi network in the old version of the software on the router TP-Link you can by going to the “Wireless Mode - Settings” section. Here we are interested in the value of the “Wireless Network Name” field. By default, it will be called something like “TP-LINK_137B00” after the name and serial number of the router - just erase the text and write your name. Then we save the settings.

To change the name of the WiFi network in the new version of the admin panel, you need to open the “Basic setup” tab, the “Wireless mode” item and find the same text entry field called “Wireless network name”.

Where to look and how to change the SSID name of the WiFi network on Asus

On routers Asus with a modern admin panel in black and blue (Black Diaomond), simply go to the “Wireless Network” menu and change the value of the “SSID” item

We look and change the wifi SSID on the Zyxel Keentic router

U Zyxel Keentic The SSID is changed in the “Wi-Fi Network” section, “Access Point” tab

We come up with our own name without changing anything else in the configuration. Save the settings and reboot the router. After changing the network name, you will need to reconnect all your devices that accessed the Internet via a wireless signal.

To change the SSID on updated Keenetic routers, you need to open the “Home Network” menu. And change the value in the “Network name (SSID)” column

The new name is also activated after the device is restarted.

Zyxel support has also written its own guide for you on how to change your network name and password. You can enrich your knowledge base with its help.

How to change WiFi network name SSID on Mercusys

To change the wifi name in the router Mercusys You need to go to the advanced section in the settings and open the “Wireless Mode” menu.

And here we change the value in the “Wireless network name (SSID)” field

How to change the WiFi network SSID name on an Apple Airport router?

Router Apple Airport assigns the network name itself by default in the form “Apple Express Network 123456”. To change the name of the Apple Airport Wi-Fi network, which operates at a frequency of 2.4 GHz, launch the Airport Utility program and go to “Manual Setup”.

Here we will need the “Wireless” tab, where we look for the “Wireless Network Name” item - this is the network name displayed on laptops and smartphones. We erase and write in our own. Then we save with the “Update” button.

If you need to change the name of the network at the 5 GHz frequency, then additionally go to the “Wireless Network Options” section

and replace the value of the line “5G Network Name”

How to change SSID and password from iPhone?

Those who have already read articles about Apple Airport on this blog know that there is also a special mobile application for iPhone to manage the router without a computer. So, you can change the WiFi name through this program. To do this you need to launch it

and click on the picture with the router

And click on the “Change” button

and change the meaning of the item - what would you think? That's right, “Network” again, and passwords for the heap.

Then save the changes with the “Done” button.

In order to change the network name on a 5 GHz network, you will have to dig deeper again, as was the case in the computer version of the application. Namely, we go back to the start page for changing settings and go not to “Network”, but to “Advanced”

Here you can already change the 5GHz network configurations. But pay attention - the password remains the same as on the main network at 2.4 GHz - this is such a feature.

Apparently, Apple developers put such a small screw on our connection security.

Video instructions for changing the name of wifi

Rostelecom provides its subscribers with personalized universal routers that are most suitable for working in the network of a given provider. The company has entered into partnership agreements with many popular manufacturers of such devices, so users can choose from a wide range of products.

This article describes in detail how to change the password and name of the Wi-Fi network on a Rostelecom router of various models and manufacturers.

Sagemcom Fast
D-Link DVG-5402SP
QTech RT-A1W4L1USBn
Starnet AR800
General recommendations for passwords

Sagemcom Fast

Routers from this company are the most popular devices that are distributed in the showrooms of the provider Rostelecom. On this router you can easily set up both an ADSL connection (incoming twisted pair copper cable) and FTTB (fiber optic cable).

If you want to change the Wi-Fi connection password on your router, you need to connect to a special configuration interface. This can be done from any device that can work with browsers: a smartphone, tablet, laptop. The easiest way to work with a router from Rostelecom is on the large screen of a personal computer or laptop.

Open a web browser.
In the search line, you need to write the address of the device in your TCPIP network (192.168.1.1, if you have not changed the default settings) and press Enter.
You will see a pop-up window asking you for your username and password. In the “Login” field you need to enter the word “admin”.
The password (if you have not changed it) is also “admin”.
You will be taken to the main router settings page.
Go to the “WLAN Setup” (Wireless Local Area Network) section using the hyperlink located in the menu on the left.
Open the Security tab.
The parameter you need is called “WPAWPA2 password”. It is its meaning that needs to be changed.
Click the “Apply and Save” button.
Now open the "Management" section on the left side.
Wait a moment for the router to turn on.

You will now be able to connect to your wireless network using the new password you set.

If you additionally want to change the network name, you will need to go to the “WLAN Settings” category, “Basic” section. Change the values of the “SSID” parameter to the desired ones and reboot the device from Rostelecom.

D-Link DVG-5402SP

Routers of this brand are among the most popular in the world. If you need to change the password on the D-link router from Rostelecom, this part of the guide is intended for you.

Launch your internet browser.
In the search bar, enter the default address “192.168.8.254” and press Enter.
You will be redirected to the login page. In the “Login” field, write “admin” and leave the password blank (unless, of course, you changed it to something else).
In the menu at the top you need to select the “Setup” section.
From the list on the left side of the page, select the “Wireless Setup” section.
Go to the “Wireless Security” subsection.
Here you need to find a parameter called “Pre-shared key” and change its value.
Click "Apply".
If you want to additionally change the network name, you will need to go to the “Wireless Basics” tab and enter the desired name in the field opposite “Network Name (SSID)”. Click on the “Apply” button.
Now open the “Maintenance” tab.
In the “Save and Reboot” section, click on the “Reboot” button to reboot the device.

QTech RT-A1W4L1USBn

Another model of routers that Rostelecom offers its subscribers. The process of changing wireless network configurations here differs little from the previous devices under consideration.

Open your browser.
In the address bar, enter the following device address: “192.168.1.1”. Now press Enter.
The system will ask you for your personal login and password. In the “Login” field enter “admin”, in the “Password” field - the same.
Among the tabs at the top of the page, you must select “Interface Setup”.
Now open the “Wireless” section.
The login field is called “SSID”, and the password field is called “Pre-shared key”. Change them and click the “Save” button at the bottom of the screen.
After this, you will need to go to the “Maintenance” section and enable reboot on your router from Rostelecom.

Starnet AR800

A standard ADSL router with Wi-Fi support, which can be purchased at Rostelecom stores. There is nothing extraordinary in its settings:

Launch your browser.
Enter the string “192.168.1.1” in the search bar and press Enter.
The authorization procedure follows: in both fields named “Login” and “Password” you need to enter the line “admin”.
You will be taken to the main page of the interface for working with the router. Open the “Wireless” tab located at the very top of the window.

If you are only interested in changing your password, you can immediately go to the “Security” page. If you also want to change the connection name, open “Basics”.

Find the “SSID” parameter here, change its value to the desired one and click on the “Apply/Save” button.
In the “Security” section you need to change the “WPA Pre-shared Key” value to a new one. Click "Apply/Save".
Now go to the “Management” section using the appropriately named tab in the top menu.
Click on the "Reboot" hyperlink in the list on the left.
Click on the “Reboot” button to begin the process of rebooting the device.

The main purpose of installing a secure key on a Wi-Fi network is security. Third-party people who choose the combination you came up with will be able not only to use your Internet, taking part of the traffic, but also gain access to shared folders on your computers. Thus, a weak password compromises the security of your operating system, your personal information, and your entire network.

That is why the Wi-Fi key should be as complex as possible, so that it is very difficult to pick up and, even more so, to guess. Under no circumstances use your own or your relatives’ and friends’ first and last names, names of pets, or dates of birth as a key. Also, do not set simple combinations as a password, such as “12345678” or “1qaz2wsx”.

It is best to use random sequences of letters and numbers. Come up with a meaningless sequence, for example “g7l2m9d4”. In order not to forget, you can write it down on a piece of paper and stick it to your router. This way, your network will be extremely difficult to hack, and you can rest assured about the security of your computer.

Open your router's configuration page. This can be done using a browser if the computer is connected to the network. If you don't know the password and can't open the configuration page via Wi-Fi, you'll need to connect directly to the router using an Ethernet cable. This way you can “bypass” the need to use a password.

Enter your username and password. Any router will require a username and password before you can access your network settings. If you did not change the password when you first set up the router, most likely the username is “admin”, and the password could be “admin” or “password” (without quotes). Different models may have different passwords, so search your router model online to find out the exact login information.

If you changed the password a long time ago and forgot it, or if you got someone else’s router, and the former owner did not reset it to factory settings, then press and hold the Reset button for about 30 seconds. This will return the router to its default settings, allowing you to enter your original username and password to log in.

Click the Wireless tab. Once you enter your router's settings page, look for the Wireless tab. The exact name of the tab depends on the manufacturer, but most often it is “Wireless” or “Wireless Settings/Setup”.

If you see more than one option in the Wireless tab, open Wireless Security.

Change your password. Find a box labeled "Password", "Passphrase" or "Shared Key". Here you need to enter your new password. Some routers require you to enter your password twice to ensure you entered it correctly.

Come up with a strong password that will be difficult, or even impossible (which is better) to guess. It should not be associated with anything personal; it should use a large number of numbers, different cases and symbols, like "!", "$" and "#".
A complex password should not be shorter than eight characters.

Check the security type. There are three main types of wireless encryption: WEP, WPA and WPA2. For maximum network security, it is best to use WPA2. Older routers may have problems connecting via WPA2, so use WPA or WPA/WPA2. It is strongly NOT recommended to use WEP encryption as it is very easy to crack (a WEP password can be cracked in less than 30 minutes).

Change the network name. Once you're in the settings, it's worth taking the time to change the network name if you haven't already done so. The name should not contain personal information so that it will be visible within the range of your network. Changing your name will stop people trying to connect to your network. Routers with a default network name are much easier to hack.