How to connect a new tablet to Wi-Fi. Wireless network via computer

The article describes in detail instructions on how to set up the Internet on a tablet. All the most popular methods of connecting to the Internet are presented.

How to set up Internet on a tablet via WiFi

Tablet personal computers With the development of technology they are becoming more and more popular. According to statistics, more than fifteen percent of consumers electronic technology have tablet PCs.

The main advantages of tablets are that they are very lightweight, making them easy to carry. The tablet, having good technical characteristics, performs all the functions of a laptop or desktop PC. Convenient for watching movies and reading books long trips and travel.

A large number of modern tablet computers can perform the function of a full-fledged phone, supporting multiple SIM cards. Accordingly, you can set up a full Internet connection on your tablet.

If you are wondering how to set up the Internet on an Android tablet via a router, follow the instructions below:

1. First you need to activate the Wi-Fi service in the tablet settings. Then check your router.
2. The router must be turned on and connected to the Internet cable.
3. Going to the menu Wi-Fi services on your tablet, you will see the name of your router in the list of found devices. Select it and enter the password.
4. It may take several minutes to connect the tablet to the router.
5. The tablet is successfully connected to the World Wide Web, and now you can use the Internet.

How to set up Internet on a tablet using a Megafon SIM card

You can connect to the Internet not only using a router. Tablets that support SIM cards can connect to the network via mobile operators. Connecting to a mobile network will allow you to stay online wherever you are.

If you want to learn how to set up the Internet on a tablet for MegaFon users, read the instructions below:

1. First, make sure that a working MegaFon card is inserted into the tablet.
2. Then you should get from the operator mobile communications Internet auto-configuration for your device model. To do this you need to send free SMS with the number 1 to number 5049.
3. Everything will come to you within a minute necessary settings. They appear in messages. After you have opened the right message, the “Install” button will appear. Press it - and within a minute all Internet settings will be saved on your tablet.
4. After completing the first three steps, you will have access to the Internet, but according to the standard tariff plan. To get acquainted with all the offers of the MegaFon company in more detail, contact the operator by calling 0500.

Modem "Megafon"

You can set up access to the network using a standard modem, which is purchased by the user at any communication store. It is imperative to first discuss the tariffs for megabytes and set speed Internet connections.

You can learn how to set up the Internet on your tablet via the Megafon modem from the instructions:

1. To connect to the Internet via a Megafon modem, you will need a SIM card and a pre-purchased modem itself.
2. Before buying a modem, check its compatibility with your tablet model, otherwise it will be impossible to establish an Internet connection.
3. Connect the modem to the tablet using a special adapter that comes with the modem.
4. Install drivers on your tablet by downloading them from the Megafon website.
5. Launch the modem management program and use it to connect to the Internet.
6. Restart your Tablet PC.
7. In the device settings, check the connection type (must be a 3G connection).
8. Everything is ready, the tablet is now connected to the Internet and ready for further work.

MTS SIM card

In this section of the article you will learn about how to set up the Internet on a tablet via an MTS SIM card.

The mobile operator MTS offers its users a wide range of services and tariff plans for connecting to the Internet. You can read on the company website detailed information about all available tariff plans in your region. Each user will be able to choose a service that is convenient and suitable for him. To learn how to set up the Internet on your tablet, read the instructions below:

1. Set up an APN access point on your tablet. It will allow you to connect to the MTS company server and access the Internet according to your tariff plan. To configure the point, go to the tablet settings and in the "Wireless" menu item, create a new APN point.
2. Call it MTS internet.
3. GPRS - channel type.
4. Website - internet.mts.ru or internet.mts.ua, depending on your country of residence.
5. Username and password - enter the text mts in both lines, without quotes.
6. Done, the access point has been created. Now you can access the Internet using standard tariff plan. For a more detailed selection of tariffs, contact the operator by calling 111.

Mobile Internet

To choose the most suitable type of Internet, you should know all the pros and cons of mobile and 3G connections.

Mobile Internet has a fairly low cost, and you can use it within the network coverage area. It's pretty a good option for those who regularly view text news or use search engines.

However, the mobile Internet speed is slow. In order to get a large amount of monthly traffic, you need to connect good tariff. The speed of watching videos and listening to music is very slow, so this type of Internet connection is not suitable for those who need quick view various types of multimedia files.

Speed

The 3G connection is quite higher speed, however, its price is several times higher (compared to mobile Internet). 3G allows you to watch videos, load pictures quickly and play music perfectly. This wireless connection option is gaining momentum and becoming more and more popular among users.

Why is a wifi tablet better than a 3G tablet?

I will say right away that I am a supporter of wifi tablets and do not accept 3G tablets for the following reasons:

Tablets with a built-in 3G modem are at least $30 more expensive

3G tablet eats battery power, be healthy. Many people are disappointed in tablets for this reason

A 3G tablet requires a separate SIM card and again costs! It seems like you want to access the Internet from your phone and from your tablet, but you can’t constantly rearrange it, so you have to have two.

Now let’s talk about how to bypass all these problems and easily access the Internet anywhere via wifi.

1. Wifi. Absolutely any tablet, even the cheapest one, has wifi. In big cities there are many wifi access points, these are cafes, parks, public places. You can install a router at home. In general, I didn’t discover anything new at this point, so let’s move on.

2. Use a smartphone. Surely a person thinking of purchasing a tablet accessed the Internet through a phone. Question: why buy when you can connect to the Internet using the following scheme:

Now all smartphones support this type of communication. On your Android smartphone in the section settings - wireless networks - modem mode choose Dot WiFi access set a password. On the phone in top corner A blue icon will appear on the screen. Then on the tablet, find the access point created on the phone and you are all on the Internet!

Note: in addition to Wifi, you can choose bluetooth or usb connection. In the case of bluetooth, you need to install on the tablet special program, of which there are many now on the Play market.

3. Buy a wifi 3G modem from any mobile operator. The scheme of work is the same as in point 2. The difference is that, for example, you work in the basement and you need the Internet, and there is no wired or any other Internet there, connection mobile operators are hidden by the walls and here the wifi 3G modem will serve as an intermediate link, install it on the 1st floor where the connection is normal and use the Internet via wifi.

There are also additional benefits, you can connect multiple WIFI devices.

4. Internet access via a 3G or 4G USB modem

An external modem can be connected via special cable. This is the most popular way wifi connections tablet to the Internet. You must first switch the modem to Modem Only mode on the PC.

Flaws:

1. The modem is hanging on the wire and will not look very good from the outside

2. The cable may come loose and the connection may be interrupted, and over time the micro USB connector on the tablet may break.

5. Last connection method. When there is no wifi router in the house, there is no SIM card, but there is wired Internet will help . Again, you will need an OTG cable. In this case, your tablet will turn from a mobile device into a stationary one, tethered to a wire.

That's probably all available methods connecting your tablet PC to the Internet!

Connecting the Internet to a tablet is probably the first thing every owner of a mobile device thinks about when he picks it up. Today, the Internet is needed not only for communication: for a long time, many programs, in addition to instant messengers and mail, and even some games require constant communication with the Internet.

Choose best internet for a tablet, you can based on the specific conditions in which you are going to use it. For example, for those who use the device only at home, and for people who are actively on the move and constantly in touch, they will be optimal different variants connections.

There are several ways to connect your tablet to the Internet. The choice will depend on your device configuration, availability additional equipment, and in some cases, your geographic location.

Wi-Fi connection

This is an option for home connection: if wired Internet is installed in your house or apartment, mobile devices can be connected via a Wi-Fi router. To do this you need:

• enable Wi-Fi in the tablet settings;
• run a search for networks and find the one you need (usually it is first in the list, as it provides the strongest signal);
• Enter the security key if the network is encrypted.

After this, your device will have access to the network, and you can use it both for communication and for watching videos, sharing photos, reading news and many other tasks.

The same technology can be used in various public spaces: now many cafes, restaurants, educational or entertainment institutions organize free access for users and visitors.

Connecting a tablet via a computer

If you don't have Wi-Fi router, and the computer connects to world wide web directly (via fiber, twisted pair, ADSL or 3G), you can use it as a router Wi-Fi module. To provide mobile devices with an Internet connection via a computer, you need to create an access point on it using regular funds Windows OS (available in version 7 and higher) or using a third-party program.

IN Windows system you will need to go to the “Network and Sharing Center”, select “Set up a wireless computer-to-computer network” and then set the network parameters, following the system prompts.

The second option will seem simpler to many, since it does not require complex manipulations. It is enough to download and install the program (for example, “Connectify”), in its settings, set the encryption type and network security key. After this, you can connect with mobile devices according to the scheme described in the previous paragraph.

Mobile networks

3G and LTE technologies are quite widely developed today and in terms of speed they can easily compete with wired connections. Mobile Internet - good way for those who are wondering how to set up the Internet on a tablet if there is no constant access to Wi-Fi.

Almost all tablet models are now equipped with radio modules for SIM cards for making calls, sending SMS and, of course, accessing the network. Study the tariffs of your operator and connect the one that suits you, taking into account the planned volume of traffic and/or time of use.

Settings from the operator usually come automatically after installing the card; all you have to do is enable data transfer in the tablet settings. If this does not happen, contact your operator and find out the access point settings for manual configuration.

Some users, having a device with two SIM card slots, use one of them for calls, and install the second SIM card only for the Internet - if the second operator offers more favorable tariff than the first one.

But how to connect the Internet to a tablet if it does not allow for the installation of a SIM card? In this case, a 3G modem will help. It allows you to establish an Internet connection on devices that are not equipped with SIM card slots: computers, laptops and tablets without a radio module.

The 3G modem is connected to the tablet via an OTG cable - a special short cable for communication with third party devices via USB. When connected, it will be recognized as a SIM card, that is, your further actions will be similar to the previous point: enable data transfer, and if the settings did not come automatically, then create and configure the connection point manually according to the operator.

Connection via smartphone

AND last method, echoing all of the above: active point Wi-Fi access You can also create it on your smartphone. When receiving mobile Internet via a 3G network, most smartphones have the function creating Wi-Fi-points, also called “Hotspots”.

Enable the “Hotspot” or “Modem Mode” function (the name depends on the device model) in the smartphone settings and start searching for Wi-Fi networks on your gadget. After discovery the desired network enter the security key (it will be visible on the smartphone when setting up the point) and connect.

Once you figure out how to turn on the Internet on your mobile device, you don’t have to worry about this question anymore: the once-made setup will be saved, and further connections will be made automatically. All you have to do is turn on the tablet and use it the necessary programs and your favorite games without restrictions.

Video instructions for setting up the Internet on a tablet

Tablet computers, which are becoming increasingly popular among portable portable computers computer devices, are primarily created by development companies to satisfy the user's need for web surfing. Naturally, in addition to this, they have a large number of capabilities, are able to provide a variety of opportunities to their owners in the field of games and entertainment, and can perform the functions of many other mobile gadgets, such as phones, navigators, media players. But, nevertheless, the first question that arises for new owners of tablet devices is: how to connect the tablet to the Internet?

There are several ways to accomplish this task. Their choice depends, first of all, on the tablet model, its technical characteristics, as well as from operating system, on which this gadget is based. And not the least role in this matter is played by the telecom operator chosen by the owner of the device.

Internet access on a tablet

Connection options

Wi-Fi connection

Perhaps any more or less decent model is equipped in this way wireless communication, like Wi-Fi. Even the most inexpensive Chinese options have such a built-in module. Undoubtedly, this makes it the most popular way to surf the web.

Owners of devices based on Android OS can connect their tablet to an already existing network Wi-Fi. Their actions will depend on the version of the operating system that supports their device. If it is Android 4.0 and higher, then immediately in the settings you need to select the first Wi-Fi item and turn it on. If it is Android 3.0, then you need to go to the settings section wireless connections, and then turn on Wi-Fi.

Setting up a wireless network

After activation Wi-Fi device will offer a list consisting of the names of all wireless networks it finds. The user just needs to choose one for which he knows the password, or a network with open access. Next, a dialog box will appear in which you must enter the password for the selected network.

Entering the network password

After all these manipulations, the tablet will be able to connect to the network. If this process was successful, an antenna icon should appear next to the clock.

The next time you connect to the network, the user will no longer need to enter the password, since the Android OS remembers it automatically.

Possible connection problems

Quite often, when a user wants to connect a tablet to the Internet via Wi-Fi, he has a problem next problem: The phrase “Obtaining an IP address.” This doesn't go any further, so the owner needs to know possible ways solutions to this problem:

• Changing the Wi-Fi network name to English;
• Enable DHCP server;
• Changing the Wi-Fi network encryption type;
• Registering the IP address and DNS server manually in the connection settings.

Changing the Wi-Fi network encryption type

It is also important to make sure that the user is not blocked by MAC address. If it is present, you just need to add the MAC address in the modem settings to the list of exceptions.

Internet via mobile operator

Another common option for connecting a tablet to the Internet is the following method. It is also quite easy to use. It is based on the same principle as when working with mobile phones. A SIM card is inserted into the gadget into the corresponding slot. Next, turn on the tablet, and select “Data transfer” in the settings. Many telecom operators immediately send an SMS message with Internet settings. But, besides this, all these instructions can be read on the official websites of telecom operators, which is recommended, since on official resources The most current data, the data in our article may be out of date.

Almost all of them look the same - you need to register an access point. For example, it can be done like this:

APN (access point): internet.life.com.by.

For Android 4.0 and higher, go to Settings-Wireless Networks-More. There, select “Mobile network”, then “Access points (APN)” and here you can set a new point with operator parameters.

Setting up an access point

Connection via 3G modem

In this method, the user must keep in mind that not all 3G modems can be connected to tablet devices. This point follows from some design features modems. At the same time, not all gadgets may have USB ports or MicroUSB ports for organizing this type of connection.

It is important to know that if the tablet device has a MicroUSB port, the user will need an OTG cable to connect to the network.

If all conditions are met, the user first connects the modem to the computer. At this step, all drivers and applications are installed. Next in options mobile client On your PC you need to disable PIN code verification.

Disable PIN code

Then you need to switch the modem to the “Modem only” mode. If this is not done, the tablet will recognize the modem as a flash card and nothing more.

Changing the modem operating mode

Next, go to the tablet’s network settings by checking the box next to “Data transfer” and “3G”. Next, you need to insert the modem into the tablet and wait a bit, while the modem should blink. Then you need to click “APN Access Points”. Created here new point and enter data for Internet access. After this, you need to save all changes. You can verify that a new point has been created by determining its activity, and it is indicated in green.

Mobile operator settings window

Connection via cable

To provide Internet on the tablet, you will need a USB cable from the device and a program Android SDK. It is a very easy to use emulator designed for mobile devices. Android platforms. With its help, access to the system part of the firmware is provided for its subsequent modification, and the owner can obtain root rights.

Window Android programs SDK

After downloading the program, the user must complete a number of steps:

• Install the Android SDK program on your computer;
• Allow it to share the network with other devices (in the Control Panel, select “Network and Internet”, then “Network and Sharing Center”, then “Manage” network connections", in the window that appears, select "Internet Connection", click right click on it, and open the connection properties, go to the “ General access" and check the box "Allow other network users to use this computer's Internet connection");
• To prepare the tablet itself for connection, in its settings you need to select the “For Developers” section and activate the “USB Debugging” mode (to do this, check the box next to it);
• Connect both devices with a USB cable.

It is important to know that if Windows prompts you to install drivers, you need to agree to this and wait for them to install.

• Restart the computer and connect the tablet via USB again;
• Next, you need to find the AndroidTool.exe application in the list of available files and run it.

Android Reverse Tethering window

Here, to activate the search for connected devices, you must press button 1 “Refresh”. Then, when the search is complete, the tablet device ID will appear in the “Select a device” section. Next in the “Select DNS to use” list you need to select the second DNS address on top and press button 3 “Connect”. If successful, the user will find the words “Connection Done” at the end of the text, and his computer will begin distributing the Internet via the USB cable.

It's important to know that this method Requires root access in the model connected to the computer.

Ethernet connection

This method is quite unusual, and is used if the user needs the most fast internet on a tablet gadget. To implement this option you will need a USB-RJ45 adapter

Ethernet cable

Installing root rights

To install the above program, root rights are required. Download and install the Ginger break program on the tablet, launch it, and in the main window click “Root device”.

Ruth is right

Video instructions for connecting to the Internet

Must be connected to the Internet. Otherwise, its capabilities will be significantly limited, and the user will not be able to use it one hundred percent. In this material we will talk about how to connect your tablet to the Internet using WiFi router, built-in 3G module, external 3G modem, smartphone, laptop and even .

How to connect your tablet to the Internet via a WiFi router

If you have a WiFi router connected to the Internet and configured at home, then for you the most simple way Connecting your tablet to the Internet will use a wireless WiFi network. In order to do this you need to follow these steps.

Make sure your tablet has "airplane mode" turned off, or "airplane mode" as it's sometimes called. In this mode everything wireless connections do not work, so if it is turned on, you will not be able to use WiFi.

Open your tablet's settings and enable WiFi module(if it was disabled).

Go to the “WiFi” settings subsection. Here on the list available WiFi networks you need to select a WiFi network from your router.

After WiFi selection network, you will only need to enter your login to access.

That's it, the process of connecting your tablet to the Internet is complete. If the WiFi router has access to the Internet, it will appear on the tablet.

How to connect a tablet to 3G mobile Internet

If your tablet is equipped with a built-in 3G module, then you can connect to mobile internet. First, you need to purchase a SIM card and insert it into a special compartment on the tablet. As a rule, this compartment is located on the side of the device.

After installing the SIM card, you need to enable the “Mobile Data” (or “Data Transfer”) function. As a rule, this is done in exactly the same way as on regular smartphone. Usually, this is enough for the Internet to work on the tablet. If you have any connection problems, you can edit the APN access point settings.

To do this, you need to open the settings, go to the “More” section and open the “Mobile network” subsection.

After this, a small pop-up window will appear in which you need to select “Access Points (APN)”.

After this, you will only have to enter your operator's details.

How to connect a tablet to the Internet via a 3G modem

If your tablet does not have a built-in 3G module, then you can use external 3G modems. To do this, you will need a regular 3G modem, exactly the same one that is used to connect laptops, netbooks and desktop computers to the Internet.

Connecting a tablet to the Internet using an external 3G modem is a little more complicated and there can be a lot of difficulties. The first thing you need to do is set the 3G modem to Modem Only mode. To do this, you need to install the program on your PC. After that, connect your 3G modem to this PC, open the 3GSW program and activate the “Modem only” mode.

The PPP Widget application is required to set up a connection to mobile networks, since tablets without a built-in 3G module are not equipped with the necessary software. Open the PPP Widget application and enter the access point information, as well as your username and password. You can obtain this data from your mobile operator.

How to connect a tablet to the Internet via a smartphone

Another relatively simple way to connect a tablet to the Internet is to connect using a smartphone. To do this, you need to open the settings on your smartphone and go to the “Other networks” section.

After that, you need to open the “Modem and access point” subsection. In other shells, this subsection may be called differently, for example, “Modem mode and access point.”

That's it, after that your smartphone has turned into a Wifi access point. To connect your tablet to the Internet, simply connect to Wifi networks, which was created by your smartphone. The Wifi network name, login and password can be found in the access point settings on your smartphone.