How to open a Samsung tablet. How to open the tablet

Facebook

A tablet is a device assembled in such a way as to give the impression of being solid. There are no screws or latches, no places where the two halves of the case fit - you can hardly see anything of this. This is a rather misleading representation, since the technique can be disassembled if necessary. Experts cope with such a procedure quickly enough, it remains for the owners to find out, the act of opening the cover of the tablet.

Why open the lid of your tablet?

A common reason for disassembly is to replace the battery. Sometimes the device needs to be cleaned, which also requires opening the lid. In other cases (when there is a suspicion that the device is broken), it is recommended to contact specialists with the appropriate tools and experience.

How do I open the lid on my tablet?

The back cover fits snugly against the front one, and therefore the work is not easy. Owners of rare models will need to read the instructions before starting work. Information can also be found on specialized forums or specialized sites.

To open the tablet lid, you need the following tools and equipment:

A set of special screwdrivers. The set must include hex and triangular, Phillips, straight screwdrivers.
Heat gun.
A plastic card, a special plastic tool - everything that will help to do the job as accurately as possible. Sometimes a guitar pick is also used for this purpose.

The order of the upcoming work

The process of removing the cover from the tablet consists of several stages:

Inspection of the tablet. Some models have fasteners that need to be removed. There are also such models that also provide for locks, they have to be snapped off.

Unscrewing the fasteners. Screws, screws should be unscrewed using appropriate screwdrivers.
Opening the cover. It is necessary to gently pry off the mediators or with another thin instrument, a card, the cover of the tablet. Inside are fragile components that cannot be damaged. The overwhelming majority of equipment opens in this way, but there are some devices that are quite difficult to untwist.

How to open the lid of a tablet without using tools?

An old plastic card with pointed ends is suitable for this. Any thin piece of plastic will work as well. You can use a suction cup, soldering kit, thin knife, tweezers, double-sided tape.

Video: removing the cover and simple parsing of the Samsung Galaxy Tab 3

There are often reasons why you need to disassemble your technique. Most often, this procedure is performed for internal cleaning. After it, your technique begins to work better and faster, and the problems that previously pissed you off disappear.

The tablet disassembly procedure can be done at home if you take full responsibility for the consequences. Some service centers will not undertake to repair your tablet even under warranty after you disassemble it. This should be taken into account, and if you doubt your abilities, it is better to contact a service center for the repair of Samsung tablets.

More often than not, when we need to disassemble a tablet, we are faced with the most ridiculous problems. The very first is usually the removal of the tablet cover. Yes, you heard right, removing the cover is also not always easy. Difficulty opening the lid is also found on Apple tablets. The lid of the Samsung Galaxy Tab 3 is also quite tight and firmly attached to the body, and many are wondering how to remove it without damaging it.

Samsung Galaxy Tab 3 disassembly

You will need a thin plastic object (such as a spatula) to remove the cover. Pull out the plug for the SIM card and, prying the back cover with a spatula, carefully around the entire perimeter, remove it.

If you only needed to remove the cover, you will not need further instructions. However, if you need to completely disassemble your tablet, move on.

After removing the back cover, you can remove the rest of the parts. We start extraction from the battery. For this we need a screwdriver. With its help, we need to unscrew 4 screws at the edges of the battery. But that's not all. You also need to disconnect the battery from the motherboard. To do this, take the tweezers and carefully disconnect the cable. Done, the battery can be removed.

Then you can take out the motherboard. Again, take the tweezers and disconnect the cables. If you don't have tweezers on hand, you can use a screwdriver. She'll do too. The cogs on the sides will now be clearly visible on the panel. They need to be unscrewed. There should be only 7 of these screws. The board can be removed.

Now you need to remove the rear camera. This procedure is no different from the ones mentioned above. We also snap off the cables to which the camera is attached and take it out. The front camera shoots a little differently than the rear one. In order to remove it, you need to snap off the plug.

Ready! Your tablet is disassembled. Now it can be cleaned and reassembled in the same sequence. The procedure for disassembling the Samsung Galaxy Tab 3 tablet is not considered difficult, but if you are in doubt, it is better to contact a service center.

Successful use of you!

How do I open the lid of the tablet?

Many tablets externally give the impression of solidity. No latches or screws are visible, only various connectors and buttons. It is clear that this is a deceptive impression, but, nevertheless, figuring out on your own how to open the tablet lid is not easy. Check out our recommendations and you can do it.

Before proceeding with the disassembly of the tablet, you need to think about whether this is necessary. If you do not have the skills to work with electronics, it is better to immediately take your device to a specialist. You are unlikely to be able to solve the problem, and it is easy to damage anything inside.

For many, the purpose of removing the cover is to replace the battery. But unlike laptops and cell phones, in tablets it is soldered to the motherboard. If you know how to solder very carefully, you can try to disassemble your device. Otherwise, you shouldn't do it.

Opening the lid

Opening the back cover of any tablet is not very easy, so let's try to figure out the basic stages of work. If you are the owner of a rare model, it is better to read the relevant recommendations on specialized forums or seek help from a specialist.

To work you will need:

a set of screwdrivers, including a straight, cross-shaped, three- and hexagonal;
guitar pick or plastic card;
hot air gun.

Progress

First of all, take a good look at your tablet. Before removing the back cover, for many models it is necessary to unscrew the screws or snap off the latches. You will most likely notice the retainers, but the screws can be hidden under the rubber plugs. If you see such, then carefully pick up and check if there are any screws under them.
The screws were found. Find a suitable screwdriver in your set and unscrew them. If there are clips, flip them off.
Now a very painstaking work begins. Slowly pry the cover of the tablet with a plectrum or a plastic card. This must be done with extreme caution so as not to damage the fragile components of the equipment. In most cases, the work of removing the rear panel ends there. But there are also models that are difficult to open.

Difficulties in removing the cover

The devices that are difficult to open include Apple products. Tablets of this type are very difficult to disassemble, so think carefully before doing this. For some models, for additional fixation and protection from non-maintenance, the back panel is glued. This is where the hot air gun comes in handy:

We turn it on and blow on the joints of the tablet.
Trying to remove the back cover by picking it up with picks.
If the lid does not come off badly, then as the work progresses, we leave the pick between the back wall and the screen every 3-4 cm. The main thing is to remember that you should work slowly and carefully. Then everything will work out.

Quite often, tablet owners have a need to open the back cover - they need to replace the battery, clean the volume buttons or replace components. It is for solving such problems that this article will come in handy, in which we will figure out how to open the tablet lid on our own.

In different tablet models, the disassembly process does not differ much, and in some cases it does not differ at all. Therefore, we will consider the general algorithm of actions and pay attention to some of the nuances.

Preliminary preparation

Before starting work, you must turn off the tablet and remove all SIM cards and USB drives from it. If this is not done, the cover may not come off or even break cards or mounts. Pay attention to the cleanliness - we will get inside the device and excess dust, and even more dirt, we do not need there.

We will need screwdrivers (most likely a cross) and a plastic card (which is not a pity).

Analysis of the algorithm

In the most general case, we just find a place where we can insert a plastic card. Usually this place is near the volume buttons. We need to carefully, prying the edge, detach the front and back of the tablet, releasing the fasteners. Sometimes a pick can be used instead of a card.

With this method of opening the case, nothing will be damaged, feel free to move the card along the case and the latches will open

But you need to be very careful - in many models, especially those made in China, manufacturers love to hide bolts. Before starting work, be sure to check that there are none. Moderate strength should be used. If the latch does not give in in any way, check additionally if there are any fasteners in this place. Sometimes they can disguise themselves under stickers or under places that mimic part of the touchpad.

It doesn't matter which manufacturer your tablet is from - Asus, Samsung, Lenovo or Prestigio - in all cases the algorithm of actions will be the same.

After you have managed to walk around the entire perimeter, do not rush to pull off the lid. First, make sure that there are no loops going to it, if there are any, disconnect them if necessary.

The tablet is open, and we can proceed to the work we need - replacing the battery or any other parts, cleaning the device from dust.

Conclusion

Very often an ordinary user is simply afraid to touch the hardware, which in many cases is correct, but not always. How to open the back cover of the tablet - we figured it out, there is nothing complicated about it. The main thing is to be careful and act very carefully so as not to damage the filling. Basically, the lid is opened to replace the battery, but we will touch on this topic separately. For more complex operations with a tablet that require qualifications, it is best to contact a certified salon, especially if your tablet is not cheap. Articles on the Internet are good, but you may come across such a model, the debugging of which cannot be explained in a nutshell. Moreover, you can run into an unscrupulous "writer" who will advise, absolutely not understanding the issue.

If you have any difficulties - ask questions in the comments!

Introduction

The battery will begin to lose its life cycle after a certain period of time after a charging period. This guide will show you how to remove the back cover of your tablet to get to the battery to replace it.

How to disassemble Samsung GALAXY Tab 2 (10.1)

Battery Samsung Galaxy Tab 8.0

Step 1 battery

Make sure the device is turned off before attempting to disassemble it.

At the top of the memory card slot, use a small metal apparatus to create a separation between the back cover and the rest of the device.

The small metal spreader is only used to create separation between the rear cover and the rest of the unit, not to remove the rear cover.

If possible, try using a regular nylon trigger to detach the back cover as it is much softer and less likely for the marker / device to scratch.

Step 2

Use an intermediate metal rod instead of a small metal soldering iron to remove the back cover. This is done by sliding an intermediate metal blade around the perimeter of the device, starting at the top of the memory card slot.

The second photo shows the inside of the device after removing the back cover.

Step 3

Disconnect the electrical connector from the motherboard using curved precision tweezers.

Do not touch the motherboard with tweezers. Metal tools such as tweezers can scratch the motherboard and damage it.

Step 4

Use the flat end of a plastic scribe to pull the battery out separately from the rest of the device.

An alternative method is to loosen the battery with a plastic soldering iron and then remove the battery by pulling on the paper tab that says "Pull (hands only)."

After removing the back cover and battery, your device should look like the second figure.

I really appreciated these instructions, thanks. I had the tools, but due to the fact that it was quite difficult to get back, the plastic tools did not help much here. I had to use a medium flat head screwdriver. There was little damage to the memory card slot after the fake, but it didn't help or hurt the TabA's performance. The original battery has a thin layer of black glue on the inside around the edge, so it took a little effort and patience to get out. I had to carefully use a screwdriver without scratching the inside of the tab to weaken the battery. My tools came with a suction cup on a ring, which was invaluable in safely removing the battery. Now my TabA is working well. Thanks again.

I'm interested in, j'ai une tablette samsung galaxy tab a qui s'eteint et s'allume (elle clignote) toute seule malgre que la batterie est presque pleine. Je n'arrive plus à l'utiliser suite à ce problème car à tout moment elle va s'eteiedre.

moi jai une tablette samsung galaxy TAB A presque neuve qui seteint et sallume (clingnote) toute seule malgres que la batterie est presque pleine, elle arrete de clingnoter et sallume complete quand je la branche au chargeur.

To assemble your device, follow these instructions in reverse order.

35 other people have followed this guide.

author

Michael Wozni

USF Tampa Team 17-4, Blackwell Winter 2016 USF Tampa Member, Team 17-4, Blackwell Winter 2016

8 comments

Thanks a lot!

Tab "A" of my son, we do not know what happened, that they are closed, we can not open it.

but the charger is ok, but we try to prevent the chargers from opening it.

Tab "A" is 7 points, using only why we are concerned about what is happening.

Please help thanks,

My 10.1 "died suddenly - never fell, shocked - worked fine in the morning, wouldn't show up in two hours. Won't charge or show ANY signs of life. 53 weeks and maybe 10 hours of use a week. I don't seem to can open it without making a mess I was impressed with the product as it worked - definitely NOT impressed Very shiny and expensive paperweight.

I looked all over the internet for a simple photo guide for tab a and all I found was tab 2 and up, so THANKS WHAT SO A LOT.

could you fix it?

Not sure how, but my tablet daughter got wet, now she is stuck in safe mode and there is any hope for it on the screen?

Im with jamie any lu if moisture gets into the tablet. Screen corner messed up: '(Just a few months.

I am looking for disassembly for samsung t580 tablet. Got under the screen to find that it has a plastic shell on top of the motherboard and I can't get to the required motherboards. Has anyone seen anything?

How do I open my tablet and what tools are required?

The modern market has a huge selection of a wide variety of device models, and it is not possible to compile an accurate list according to the method of parsing each brand. Therefore, it is worth dwelling on the general case. You can also find useful information by reading the article How to disassemble a tablet.

To open the device, you should acquire such tools - a set of small screwdrivers (Phillips screwdriver, straight, torx).

Also, you can use watch screwdrivers, but the choice must be stopped on a high quality product, since bad inventory can irreparably damage your tablet... In the process of opening the tablet, special plastic blades, designed for disassembling gadgets from the field of electronics, help. All of them will be needed to open the back panel of the device. You can buy them on the radio market or in special sections of stores.

If suddenly the tool could not be obtained, how to open the cover of the tablet?

How to open a tablet without a tool?

The main thing is not to despair, as a replacement they use a plastic card, pre-sharpened - an old credit card or discount card. Any thin piece of plastic will work as well.

How do I open my tablet with the display suction cup?

The suction cup helps to separate the touchscreen from the protective glass on a number of models. A sharp thin knife, a set for soldering, tweezers, double-sided tape, small-sized nippers are also useful. And sometimes you have to have a hairdryer close at hand.

Removing the tablet cover using a special tool kit

Decision is made. The entire set of necessary tools is available. But after looking closely at the device, the question arises - which side is it better to approach to it, how to open the tablet and not harm the device? At first glance, many devices do not have removable panels, and there are no screws on the case. Typically, in such cases, the back cover is connected to the front with latches. And in order to open the lid of the device, you need to find a thin slot at the point where the parts of the case are connected, and insert a plastic spatula into it. It is very carefully carried out along the perimeter of the device, while snapping off all the latches.
All models of tablet computers have a different arrangement of such latches, so you need to show increased attention at the time of disassembly. Then the tablet is opened very carefully. You need to be extremely careful, since various parts are attached to the back panel - antennas, various cables or speakers.

Ready. Now the tablet is open, the goal is achieved. Then you can continue the disassembly process or do what the gadget was disassembled for.

How to open the tablet. Video

Articles and Life Hacks

This tablet caused a real sensation, and it was even called the "iPad killer". Many of those who became the happy owner of the device are interested in how to remove the back cover on a Samsung Galaxy Tab 2 P3100... Is it possible to do this, and how safe is it? And is it necessary for this? Our article will answer this question.

Can the back cover be removed from Samsung's Galaxy Tab 2 P3 100? A little about the characteristics

The answer to the question of how realistic it is to disassemble this Android tablet is in the affirmative. Of course, it is best to entrust the dismantling to a specialist and not engage in amateur performances, but there are still invariably many who want to try their hand. Of course, the tablet itself has a collapsible design, and it is quite possible to remove the back cover. You need to disassemble the device, starting from there.

The described tablet has very decent characteristics. You can select a 7-inch screen diagonal, a 1 gigahertz processor (especially for multimedia), 16 gigabytes of internal memory, support for micro-SD memory cards (expandable up to 32 gigabytes), 512 megabytes of RAM and an original design. Unfortunately, the main camera is designed for only 3.2 megapixels, and the front one - for 1.3 megapixels. This is not enough for a tablet of this class.

Obviously, the Galaxy Tab is much smaller in size than its main rival from Apple. Its parameters are only 190.1 x 120.6 x 12 millimeters. Whether it is an advantage or a disadvantage, it is up to the users to decide in each specific case.

Samsung Galaxy Tab 2 P3 100 Back Cover Removal Instructions

First, we will need to take care of finding the right tools. For example, a Philips PH00 Phillips screwdriver, a special metal tool (designed for disassembling cases; if necessary), a plastic spatula tool and a tri-wing Y1 screwdriver with a tri-wing slot (three-blade) would be a good choice. A regular pick for playing musical instruments is also useful as an aid. The list, of course, is not needed.

So let's move on to how to remove the back cover on the Samsung Galaxy Tab 2 P3100. We look for screws and pry off the plastic cover from both ends of the dock station. There should be two tri-wing propellers underneath. Well, since we have a special screwdriver, it will be very easy to deal with them.

Using a pick and a plastic "spatula", pry the front panel of the tablet around the perimeter, and then separate it from the back of the plastic case. Unlike the process of disassembling an iOS device, we do not have to deal with copper clips, which easily deteriorate. We detach the plastic latches and remove the back of the case of our tablet. By the way, the plastic construction makes it easier to receive wireless communication channels.

Finally, we note that repairing the Galaxy Tab is very simple. The battery can be replaced by the user. It will be easy for him to get to all parts of the tablet without using a soldering iron. The 3-blade propellers mentioned above obviously serve as a deterrent for all novice craftsmen, but in fact anyone with a set of good screwdrivers can handle them.