How to set up mms in android. How to enable MMS sending for a Beeline SIM card


MMS should have lost its former popularity. But this did not happen due to various reasons: firstly, not all people have access to the Internet, and secondly, sending MMS messages is much faster than in any instant messenger.

Advantages of MMS

MMS on Android

From the operating room Android system in most cases support data transfer when help MMS. You just need to configure it. You can change configurations on Android using automatic configuration, you can immediately contact your mobile operator, configure it manually, or order settings on the operator’s website.

Automatic MMS setup

This method very convenient because the technology will do everything itself instead of the user. The likelihood of making a mistake or damaging your mobile device is close to zero. The only negative: you can use automatic configuration only once (when you first register on the network mobile operator). How to set up MMS automatically:

  1. Install a SIM card.
  2. Launch mobile device and enter your PIN if required.
  3. Receive settings in the form of SMS messages from your mobile operator.
  4. Run the configuration and wait for the installation to complete.
  5. You can now read sent messages.

Asking an operator for help

Unlike the previous method, you can ask the operator for help an unlimited number of times. But here the user will have to strictly follow the instructions in order to achieve positive result. Each mobile network operator has its own toll free number technical support. You need to ask to send MMS settings to mobile phone number:

  • MTS – 0890;
  • Megafon – 0550;
  • Motive – 111;
  • Beeline - 0611.

After ordering settings, you must accept them, and then reboot the device to start using and sending messages. It happens that the service does not connect the first time and requires additional activation. In this case, you need to call again technical support and ask to turn on the service for given number cell phone. After all manipulations, graphic messages will be activated.

Setting up MMS manually

If it is impossible to get through to the operator, and the MMS service is needed any minute, then you will have to install it on your own. Instructions:

The next steps vary by operator. Only some columns are the same for users of Beeline, Megafon, MTS, Tele 2, Motiv. This is the “access point type” - mms and the “MMS port” - 8080 (there is an alternative code 9201 for MTS and Tele 2 subscribers). Example of settings for the mobile operator Beeline.

You can specify any username(use Latin characters). The access point is mms.beeline.ru. The login, or username, will be beeline and the password will match it (also beeline). In the MMSC column you should enter http://mms/. The IP address for this mobile operator is 192.168.094.023.

You only need to enter the specified information, and leave the remaining columns unchanged. Afterwards, you only need to save the entered data and restart your mobile device.

Order settings on the operator’s website mobile communications:

  1. Go to the mobile operator's website.
  2. Select the model of your cellular device from the list listed and enter your mobile phone number.
  3. Click "send".
  4. Over the course of some time, the phone will receive settings that will need to be installed.
  5. Reboot your device when installation is complete.

If you are unable to achieve success, then the problem is most likely in the user’s actions or in the settings of the phone itself. If you fix the problem It’s impossible to do on your own, you should contact service center mobile operator.

Picture messages open in the same way as text ones. If the sent file is not displayed, you need to look at the settings for receiving and sending MMS messages.

Articles and Lifehacks

A graphic message will appear, but it is not always possible to view it. How to open mms on your phone is no longer something unknown and frightening. And why be afraid: modern users even manage to open an MMS. Any mobile operator provides this service and sends settings to the phone, if the phone supports this function. But if the phone is monochrome, without polyphony, very old, and does not support this function, then it is unlikely that you will be able to open such message options on it.

How to set up your phone to receive mms

1. First of all, you should make sure that your phone supports GPRS/EDGE. Only in this case can receiving and sending MMS messages occur. If you are not confident in the capabilities of your phone, then the instructions for your device will help you.

2. The next step is to call your operator. During a personal conversation, ask to send you the settings on your phone or, by following voice prompts, “alone” request that they be sent to you. For example, it is enough for Megafon to receive a message from you with the text “3” to the number 5049, MTS will receive from you empty message to number 1234 or after your call to 0876 ( free call will) send you necessary settings for mms. Beeline provides a similar service by default to all its subscribers. However, if this does not happen, then it is enough to send a request to *110#181#.

3. You will receive a regular message on your phone containing the settings. It won’t say how to open mms on your phone, but it will ask you to save the settings and write a password for activation. Therefore, save the settings on your phone. They will automatically appear on your phone if it supports this function. After saving all the settings, turn off the device and wait a little. And turn on the phone again. If everything was correct, now it’s on your phone mms will be both opened and sent. The only thing that can get in the way is if, but that's a different story.

How to open mms

If you receive an mms, but you cannot open it, then first check the settings. Perhaps you were returning to standard settings for some reason. And everything sent by the mobile operator and saved on the phone may be lost. Therefore, ask again to send you the settings.

MMS are opened in the same way as regular messages. The only difference between them is that they can contain pictures, videos, melodies or a larger number of characters. If it doesn’t open for you, check your spam settings to make sure nothing is listed there. And also make sure that you have settings for sending and receiving mms. If it seems to you that everything is in order, but the mms still does not open, then go to the nearest center with your operator, ask the center employees to help you figure it out and set everything up.

If they don’t open on Android MMS messages or are not sent, the first step is to check the APN point settings. The operator sends the configuration when you turn on the phone for the first time. new SIM card. However, the settings may disappear or be incorrect after changing the SIM card.

This article is suitable for all brands that produce phones on Android 9/8/7/6: Samsung, HTC, Lenovo, LG, Sony, ZTE, Huawei, Meizu, Fly, Alcatel, Xiaomi, Nokia and others. We are not responsible for your actions.

Reasons why MMS does not reach/arrive on Android

main reason having problems with MMS - incorrect setting parameters in the system. This is true for both the sending party and the receiving party. But there may be other reasons:

  • The phone does not support the message format sent by another user.
  • MMC size is larger than free space in the smartphone's memory.
  • The feature is disabled or not supported in the tariff plan.

First you need to check the MMS settings on your phone, and if they turn out to be correct, then the next step is to call the operator’s support service.

Setting up MMS reception for Android

Any operator, be it a long-standing MTS or a relatively new Yota, sends Internet and MMS settings when you first install a SIM card in your phone. But some users ignore the configuration message and do not save the settings. As a result, attempts to use mobile traffic to access the Internet or send/receive MMS fail - Android does not understand what data to use to complete the task.

Therefore, in order to figure out why MMS does not load on Android, you need to make sure that the necessary parameters have been added to the system. Each operator has its own identification data, but the procedure for setting up the Internet and MMS is the same for everyone.

Automatic setup

If you did not receive configuration messages or simply deleted it, or do not know where the MMS and Internet settings are stored, then use the opportunity to order parameters from the operator. Each provider has a special number to call or sending SMS with specific text. Example for Russian Federation:

  • MTS - call to 0876 or an empty SMS to number 1234. You can order MMS settings separately by sending “MMS” to 1234.
  • Beeline - command *110*181# or call 060432.
  • Tele2 - call to 679.
  • Megafon - send “3” to number 5049.

In addition, each operator has a personal subscriber account on the official website, through which you can manage services, including ordering Internet and MMS settings. Authorization in your personal account takes place using the phone number and password received via SMS.

Manual MMS setup

If automatic setting does not work (the operator does not send the settings, or they are not saved in the phone), add the parameters manually. You can view them on the website mobile provider in the "Help and Support" section. To perform manual setup, you need to know where the MMS settings are stored in Android. Will help next instruction:

  1. Open your phone settings and go to the Data Transfer section.
  2. Turn on mobile data by sliding the switch to active position.
  3. Return to the settings menu. Open the "More" section.
  4. Go to Mobile Networks and select APN Access Points.
  5. Call extra menu and select adding a new point.
Increase

Depending on the model of your smartphone, the names of the items may differ slightly, which is due to the Android shell of the manufacturer of your smartphone.

A menu will appear APN settings, in which you must specify the MMS parameters provided by the operator. They are the same for everyone Android versions. For example, to set up MMS on Tele2, you must fill in the following fields:

  1. Name - Tele2 MMS.
  2. APN - mms.tele2.ru.
  3. MMSC - http://mmsc.tele2.ru.
  4. Proxy - 193.12.40.65.
  5. Port - 8080.
  6. Authentication - no.
  7. APN type - mms.

 Increase

After entering the connection parameters, save the configuration, restart your smartphone and try sending MMS or ask a friend to send you a photo message. To set up MMS for other operators, use the table below or find the settings on the official websites of mobile providers.

The MMS function is supported by many modern models phones. The ability to send multimedia messages allows users mobile phones share with each other impressions of a vacation, a walk, wish a great mood along with a beautiful melody or interesting picture. This function is now actively used by those subscribers who own older models. cell phones. Multimedia messages are also convenient when it is not possible to use more in modern ways information transfer - Wi-Fi and WhatsApp.

The question of how to set up MMS is asked by subscribers of all existing operators. The system for setting up the function of sending multimedia messages is approximately the same for all operators. To be sure that the feature will be available and you can use it, you must complete all possible settings, which include the following three steps:

  • Step 1 - you need to activate the service;
  • Step 2 - configure account;
  • Step 3 - Check your phone settings manually.

Let's look at the features of connecting to the service and setting up an account within each mobile network. Step 3, which includes setting up the device manually, will be considered separately - it does not depend on the operator.

Setting up MMS on Tele2

The question of how to set up MMS on Tele2 will be resolved after you select any of the methods listed below:

After execution necessary actions the service will be connected and account settings will be activated.

Setting up MMS on MTS

MTS users can also set up MMS automatically. In order to connect the service and activate the necessary settings, you need to choose the method that is most suitable and convenient for you:

  1. Make a call to number 0876.
  2. Send a free message with the text “MMS” to number 1234.
  3. Dial command *111*18#.
  4. Use an assistant.

The settings received in the SMS message must be saved on your device.

Setting up MMS on Beeline

The question of how to set up MMS on a phone whose operator is BeeLine can be solved in very simple and quick ways: The 1st method is to connect to a service called “Pack of three services”, which includes WAP/GPRS/MMS. You can do this by dialing *110*181# and the call key on your phone. This way you will connect the service and activate your account settings. Method 2 is to activate the service in your personal account.

Setting up MMS on Megafon

Megafon has provided subscribers with ample opportunities to manage their phone settings.

Therefore, the question of how to set up MMS on a phone with a Megafon SIM card is not a problem. Choose the method that is most convenient for you:

  • Send an SMS with the number 3 to number 5049.
  • Use the self-government service *105#, where then send request 6 (Settings) - then 1 (Phone settings) - and 1 (MMS).
  • Order settings on the company website.

Setting up your phone manually

This step must be completed in order to no longer hesitate and be confident that multimedia messages will be sent from your phone without unnecessary snags. It consists of several actions:

  1. In the phone menu, find the “Settings” tab (“Options”), then “Configuration”.
  2. Check the MMS message configuration settings:
  • access point in Tele2 - mms.tele2.ru, in MTS - mms.mts.ru, in Beeline - mms.beeline.ru, in Megafon - mms;
  • username in MTS and Beeline is the name of the company in small with Latin letters, in Tele2 - absent, in Megafon - mms;
  • the password in MTS and Beeline is the same as in the username, in Tele2 it is missing, in Megafon it is mms;
  • authentication type - select “normal”.

Further actions:

  1. Enable the new account as the default account.
  2. Reboot your device.
  3. To register your number on the network as an MMS user, you need to send a multimedia message to your phone after turning on the phone

Setting up MMS on iPhone

The question of how to set up MMS on iPhone can be resolved by performing several manual steps.

1. Order a service:

  • MegaFon operator - send an SMS with the text “gprs” to number 000890;
  • Beeline operator - call 067409181;
  • MTS operator - send an SMS with the text “GPRS ON” to short number 0016;
  • Tele2 operator - call toll-free number 693.

2. Connect the device to a PC that has Internet access and is running iTunes app. Agree with the offer “Download updated settings" If there is no offer, it means that the service is configured or is not supported by the operator.

3. In the phone menu, open the “Settings” tab, then go to “General”, select “Network”, go to the “Cellular Network” menu.

  1. Enter the required values:
  • Access point (APN): MTS operator - mms.mts.ru, Beeline - mms.beeline.ru, Tele2 - mms.tele2.ru, Megafon - mms.
  • The username in Beeline and MTS is the company name in small Latin letters; in Megafon and Tele2 it is absent.
  • Password - similar to username.
  • MMSC: operator Tele2 - http://mmsc:tele2.ru, Beeline, MTS, Megafon.
  • MMS proxy: Beeline operator - 192.168.94.23:8080, Megafon - 10.10.10.10:8080, MTS - 192.168.192.192:8080, Tele2 - 193.12.40.65:8080.
  • The maximum size is 512000.

The MMS setup on your device is now complete. Enjoy the service!

Today, to send media files, many users prefer to use e-mail, social networks, communication applications. However, there are still adherents old model sending photos and pictures using the MMS system. Setting up a smartphone is not fundamentally different from the method of setting up previous generation phones. Let's look at how to set up mms on Android using all available methods.

First of all, it is recommended to call your telecom operator and make sure that this service is active for specified number. It’s paradoxical, but numbers in some regions are deprived of the ability to send mms. Therefore, activating the mms system will be absolutely meaningless in this case.

It is recommended to call the operator and find out all the details for your number. If the service is available (the probability of which exceeds 95%), then the most in a simple way is a request for automatic MMS settings. The settings are sent to the requested number, saved, after which the user can send media messages.

Contact your operator, name the exact phone model, since each brand and series has personal parameters, and order the settings. In some Android models, an automatic configuration system is not provided, “thanks to” which the user will have to download the service in manual mode. This will be discussed further.

Setting up mobile Internet and MMS on the phone - algorithm:

  1. Activate Mobile Internet through the telecom operator you are using. Please note that some Androids provide for the use of two SIM cards. Therefore, when activating the Internet, you must select a specific number;
  2. Go to the smartphone menu by selecting the “settings” section;
  3. We visit the window " wireless network", select the item "data transfer", activate this option;
  4. After this, we return to the “wireless networks” menu, go to mobile networks and select an access point;
  5. In this window, you must indicate the SIM card that you will use to send and open received messages;
  6. Click on the selected SIM card; if, after clicking, two access points do not appear in front of you (one for the Internet and one for the MMS option), then you will have to add an access point yourself.

Please note that the data entered will be personal for each operator. There is no single universal system mms settings Let's look at what access points look like for different communication providers.

How to send MMS messages from Android - operator settings:

  • Megafon – to receive settings, you need to send a message to number 5049. You will receive an automatic package of parameters. The user needs to open and save the sent settings, and feel free to use the service. When manual settings you need to enter the data indicated in the picture;
  • Beeline - to request an automatic package, you must use the number 06741015. You can also configure the mms option in the section personal account. Manual activation occurs as follows;
  • MTS - automatic setup is available by calling 1234. Alternative option is to use the Internet assistant to configure. Manual activation looks like this;
  • Tele2 - automatic setup will be available after calling the operator. Manual activation is filled out like this.

It is important: mms settings is quite simple, regardless of which telecom operator you use. However, please note that the average cost of one message will be 7 rubles. It's much more profitable to use modern technologies free of charge.


2024 gtavrl.ru.