How can you configure the internet explorer browser and what is needed for this? Where can I find Internet Explorer browser properties? How to open Internet Explorer settings.

Instructions

If you are using Internet Explorer 6 or 7, proceed as follows: first go to the menu in the chain Tools -> Internet Options -> Connection. If you are using Dial-up, highlight the required one, then click “Settings”. Otherwise, click on the “Network Settings” button, which is located in the “Local Network Settings” section.

Now you need to check the box next to the “Use proxy server” option, in the “Address” field enter the name of the proxy server you have chosen and in the port field, respectively, the proxy port number. If necessary, check the box next to the option “Do not use a proxy server for local addresses”, and also click on the “Advanced” button, and then specify the parameters for various protocols. At the end of the settings, click on the “Ok” button twice: the first time to close the Dial-up or local network settings window, and the second time to close the Internet settings window. Ready.

If you prefer to work in the Opera 9 browser, go through the menu chain Tools -> Settings -> Advanced. Now go to the “Network” tab located in the section on the left. Click on the “Proxies” button, then specify the appropriate proxy servers for the protocols. Finally, allow the use of a proxy by checking the appropriate boxes: HTTPS, HTTP, and so on.

Web browser Google Chrome appeared on the IT product market not so long ago, but has already gained the trust of a certain number of users. It works on the “Install and use” principle, but before starting work it is better to make a few changes to the program settings.

And other malicious programs, a properly configured browser with the installation of the necessary add-ons and plugins. One of the best protection against all kinds of spyware is the latest version of the installed browser, for example Internet Explorer 11.

To protect the IE browser, it is advisable to disable unnecessary (or unused) browser settings that may be vulnerable to external attacks. For advanced security settings, follow these steps:

Turn on pop-up blockers for websites you don't recognize. This security feature allows you to select your desired locking level. When you visit websites, you will receive pop-up blocker messages. You can also create a list of sites in advance where pop-up windows will not be blocked.

Sites in your list will display pop-ups as usual. To enable pop-up blocking, click on the "Tools" button and select "Internet Options". Next, go to the “Privacy” tab, “Pop-up blocking” section, where check the “Enable pop-up blocking” checkbox and agree to the changes with the OK button.

Please note that this feature will not block pop-ups from websites within your local intranet or your trusted sites.

To block absolutely all pop-ups, move the security level slider up. In addition to the default “Medium” mode, there are three higher levels of protection.

Protected mode.

Another browser security option is Protected Mode. This feature will help prevent malware from running in your browser. To enable protected mode, again click the "Tools" icon, "Internet Options" item. On the Security tab, select the Enable Protected Mode checkbox and click OK.

Protected mode is configured separately for all zones: Internet, Local intranet, trusted sites, and dangerous sites.

Disable ActiveX.

A major security enhancement for Internet Explorer is to disable ActiveX, Active Scripting, and Java. But, in this case, verified sites that also use these functions will not be able to load properly. Add them to your trusted list. To set Internet Explorer to the highest security level, move the slider all the way up and agree to the changes with the OK button.

How to enable ActiveX for verified sites.

Click the "Tools" button, go to the "Security" option and check the "ActiveX Filtering" box. Now, when you visit a web page with ActiveX controls, Internet Explorer will block them. The ActiveX filtering icon appears in the browser's address bar. Clicking on the icon will enable ActiveX for that specific web page.

Disabling Java scripts.

Java scripts create interactive web pages, but are also an open gateway for malware. Enable Java scripts only for trusted websites. To disable them - the "Security" tab. Click on the "Other" button and scroll down to the "Run...Java Scripts" heading.

The standard browser for Windows is usually installed along with the operating system. If you find that for some reason the program is missing from your computer, install Internet Explorer yourself using the simple instructions below.

Installing Internet Explorer

First, make sure you don't have this browser. Click on the Start button and enter the appropriate query in the search bar. If there are no results, proceed to action.

Enable the component

Why might he be missing at all? Some default builds of Windows may not include certain components. IE is considered one such component. Thus, you will always have it missing from your system until you enable the corresponding component.

1.Launch Control Panel via Start and open the “Programs and Features” section.

2.Move your gaze to the left side of the window. Click the "Turn Windows features on or off" link.

3.In a new window, find the folder with Internet Explorer. Mark it with a checkmark. Click on OK. The system itself will download and install a standard browser. It would be a good idea to restart your computer.

Download it yourself

The previous method does not always help install Internet Explorer. In this case, downloading and installation must be done manually. Let's look at step-by-step instructions using IE 11 as an example. You can find out how to download later versions of the program and understand what version of your built-in browser you should have.

1.To download the latest version, go to the following address: https://support.microsoft.com/ru-ru/help/17621/internet-explorer-downloads.

2.In the context menu, select your OS version.

3.Select one of the two blue links according to your Windows bitmap.

4.The installer will start downloading immediately. When the download is complete, open the file.

5.The installation process will begin. In a small window you will see your progress.

6.For the settings to take effect, restart your computer. After starting the system, you will see that a browser shortcut has already appeared on the Desktop.

If you installed a new version of the browser, you will need to install the necessary add-ons again. With them, users can control the toolbar, accelerators, ActiveX controls, browser helper objects, search engines, tracking protection, and enable spell checking for text that is entered into fields.

1. Open the built-in Internet Explorer client.
2. Click on the “Service” section in the top panel. If the panel is missing, press Alt. Click on "Add-ons".
3. Click on the "All add-ons" link.
4. Find the add-on you need and click on the “Enable” button. Do the same for each add-in. Also disable those you don't need.
5. Click “Close” for the changes to take effect.

Download problems

Why might IE not install? Let's look at popular reasons and solutions.

1. Failure to meet minimum requirements is the most common reason. As a rule, in this case, a small window appears with a notification: “The installation of Internet Explorer is not completed.” Make sure you download the correct package. The bit size and OS must match. Internet Explorer 11 can be installed on Windows (x32 or x64) with SP1 or later, as well as on Windows Server 2008 R2.

2.All necessary updates are not installed.

Programs are also not installed because the operating system lacks updates. The system will notify you about this in a special window. There will also be a “Get update” button. Then you need to return to the download page and install the browser.

3. Antivirus operation.

Antivirus and antispyware clients sometimes block the launch of files downloaded from the Internet. The IE installer is no exception. Try disabling your antivirus software and Windows Firewall for a while and opening the installer again. After successful installation, reactivate all the programs you just disabled.

4.The system contains an old version of the browser. In particular, code 9C59 indicates that the previous version of IE remains in the computer's memory. In this case, you need to clean up all the tails and delete the program.

5.Presence of viruses. If you cannot install the browser, check your computer with an antivirus. Run a deep scan in particular.

Every user should know how to install Internet Explorer if it suddenly turns out that the program has disappeared from the computer. Most likely, there was a system failure (malware could also be the cause) and the system disabled this component. Your task is to turn it on again so that the OS can download and install the browser itself.

If your browser is slow, it's not necessarily due to a poor internet connection. Third-party toolbars, some add-ons, cookies, or less-than-ideal settings may also hinder your browser's performance.

Here are some simple things you can do to optimize your Internet Explorer browser experience:

More ideas that may be useful:

Removing toolbars

Many toolbars that are downloaded and embedded in the browser affect not only its appearance, but also slow down Internet traffic.

A browser toolbar is an add-on (extension) added to its interface. While some browser add-ons can enhance your online experience and can be very useful, others have negative consequences. They can easily set themselves as default when bundled with widely available free applications, and they sometimes interfere with or conflict with other software on the computer.

Each toolbar has its own specialized functions, such as search, emoji, music player, etc., so they will require additional resources to function.

In order to remove some of the toolbars, you will need to open the list of installed programs (in Windows 7, click Start(Start) > Control Panel(Control Panel) and in the section Programs(Programs) click Uninstalling a program(“Uninstall a program”) - remove programs that you never use).

Right-click each toolbar in the list that you would like to remove and select Delete(Uninstall). Once you complete this process, the toolbars will be completely removed.

Disable toolbars and add-ons directly in the browser

2. Click the button Service(shaped like a gear) in the upper right part of the window, then select Configure add-ons(Manage add-ons).

3. Under the inscription Display(Show) select All add-ons(“All add-ons”).

4. Select each add-on you want to disable and click Disable(Disable).

5. When you're done, close the window and restart your browser.

Delete cookies and clear browser cache

Few people remember to do this, and eventually the hard drive becomes full of large amounts of data stored by the browser for years.

To clear your browser cache:

1. Open Internet Explorer.

2. Click the button Service(Tools) , hover your mouse over the item Safety(Safety) and select Delete browsing history(Delete browsing history). If you do not want to delete cookies and files from websites in your favorites list, select the checkbox Save data from your favorite websites(Preserve Favorites website data).

3. Check the boxes next to the types of data that you want to delete.

4. Click Delete(Delete).

Resetting your browser settings

Sometimes when you install a program, it may change your browser settings without your knowledge. You may notice that your browser is behaving in some unusual way.

If Internet Explorer stops responding to commands or working in general, if you encounter error messages indicating that Internet Explorer will close, or if you experience slow performance, you may want to reset Internet Explorer settings. To do this, follow the steps below.

1. Launch Internet Explorer.

2. Click the button Service(Tools) then select Browser properties(Internet Options).

3. In the window Browser properties(Internet Options) click the tab Additionally(Advanced).

4. Click Reset(Reset).

5. In dialogue ResetparameterssettingsInternet Explorer click Reset
Check the box Remove personal settings(Delete personal settings) only if you want to simultaneously delete your browsing history, search service settings, Accelerators, home pages, Tracking Protection and ActiveX Filtering data. By checking this box, you are essentially launching a fresh version of Internet Explorer.

6. When Internet Explorer has finished reverting to its default settings, click Close(Close), and then OK.

7. Close Internet Explorer and restart it.

Installing a new version of Internet Explorer

Upgrading to the latest version of Internet Explorer will make your Internet access faster. In addition, your computer will be more secure, and it is very likely that the problems you were experiencing with your old browser will disappear.

Using the table below you can find out which latest version of Internet Explorer you can use due to the operating system you are using:

To get the latest version of Internet Explorer, follow this link.

Switch to another browser

There are many internet browsers, each slightly different from the others. Some browsers have a lot of features, others are quite simple in this sense. Some work a little better than others. But all Internet browsers basically perform the same function: allow us to browse websites.

The most popular browsers are Google Chrome, Mozilla Firefox, Internet Explorer, Safari and Opera. There are also other, less popular browsers such as RockMelt, Avant Browser, Maxthon, Deepnet Explorer, Flock, SeaMonkey, AOL Explorer, etc.

Switching from one browser to another is in most cases the fastest and easiest way to fix many of the problems we encounter. If the browser is cluttered with toolbars and plugins, if it won't open some websites, or if it takes too long to load content, you can try installing a different one and see if it works better.

To install a new internet browser, you will need to use the one you already have to find and download another one. Simply use a search engine such as Google or Bing to find the browser you want to install and click the download link.

Here are the pages on our website for the most popular browsers that can be used instead of Internet Explorer:

You might also find this guide on how to optimize your browsing speed and performance when using Chrome and Firefox helpful.

Based on materials from the Internet portal. Translation into Russian: Alexander Ryabov

Internet explorer may not be the most popular browser, but sometimes Windows OS users need to work with it. Most often this is associated with banking, tax and other similar applications. For some reason, their authors develop their programs specifically for Internet Explorer. These very programs often require special settings of the browser itself, which are done in Internet Explorer through the browser properties or browser properties.

Many instructions for the Internet explorer browser imply entering its properties, but exactly how to do this and where these properties are located is silent.

In this article we will tell you where these browser properties are located and where they can be found?

Where are the browser properties in Internet explorer?

There are at least two ways to enter Internet explorer settings. The first is through the browser itself, and the second is through the control panel.

In the browser itself, to go to the settings, you need to select “Tools” -> “Browser Options” in the top menu.

Entering browser properties through the top menu of internet explorer

If you do not have a top menu, then you need to click on any free space immediately below the address bar with the right mouse button and then click on “Menu Stock”.

Enable top menu in internet explorer

To get to the browser properties through the control panel, you need, for example, through the “Start” menu and click on the “Browser Options” icon.

Browser properties in the taskbar

A familiar window will open in which you can configure various settings of the Internet explorer browser.

Open window from internet explorer browser properties