Why iPhone 5s is buggy. Disabling graphic effects

Some lucky iPhone owners sometimes have to deal with a rather unpleasant problem - the sensor on the iPhone 5S is glitchy. There can be many manifestations and reasons too. But, not the point, it’s more important to know what to do now.

Sometimes you can do it on your own, but in some particularly difficult cases you cannot do without a trip to a repair shop. Therefore, in order to decide whether to take the device for repair or heroically save it yourself, you need to figure out what the problem is and what caused it.

So, the main signs of problems in touch screen iPhone:

• The screen does not respond to touch or only responds in certain areas. This may happen all the time or only occasionally;
• The response to touch occurs with a delay;
• The smartphone begins to live its own life: read Chinese blogs, call the Prince of Monaco, and also send vulgar SMS to friends, family and boss;
• Each manifestation has its own reasons, and, naturally, in order to troubleshoot, it is necessary to find out why it happened.

Why doesn't the touch screen work?

If the sensor does not respond to touch at all, this is likely due to mechanical damage, for example, due to a fall. This can also be caused by water penetrating inside the housing.

But it is possible that the problem lies with the OS, especially if the screen is only partially not working. The cause of the glitch operating system It may turn out to be a simple failure/temporary freeze or an incorrect update.

Also, disconnection or malfunction of the sensor can cause specific program, usually downloaded from unknown source. And it doesn’t have to be “bad” - it just may be incompatible with current version axis or, in general, be outlawed by Apple developers.

If the iPhone 6 or 5c suddenly acquired artificial intelligence, and the “rebellion of the machines” took serious turns, then this is probably the work of a virus. Previously, there was no infection for mobile devices, but those days are long gone. Often this is the Autoclicker virus.

If the screen module has already been replaced, it is possible that it was installed incorrectly, something was damaged in the process, or it itself is of poor quality. There is no option - to take it back to the would-be master.

What else can affect the screen's performance?

• The screen matrix malfunctioned;
• One of the device parts has broken down, for example, the corresponding microcircuit;
• Internal contamination and resulting short circuit

In the latter cases, without professional help can’t be done, but in other cases there is a chance to cope on your own.

What to do if the sensor on your iPhone is not working properly?

The very first step that works is to reboot the device. This applies to any electronics. In the case of an iPhone, you need to hold the Home and Power buttons for 10-15 seconds. After this, the device will reboot, and perhaps everything will start working.

If this does not help, then more will be required radical methods– full return to factory settings or rollback latest updates. In this case, all data will be cleared, so you should make a backup on your computer before starting this procedure.

Also, it is possible that dirt has gotten under the protective film of the screen, especially if it is glued poorly. Then you need to remove it, wipe it and stick a new one.

Sometimes, after a fall, protective glass microcracks appear, and air and moisture enter the space between the glass and the screen. An oxide film appears on the touchscreen, and it stops responding to commands or does it poorly. There are no options here - the glass is removed, the screen is wiped and a new protective surface is installed.

It could also be the bumper, which sometimes runs over the screen. Therefore, if everything works fine without it, the protective accessory needs to be replaced with a more suitable one.

As already mentioned, the operation of the axis can be affected by a certain program. For example, the Zillow application leads to similar consequences, especially on the iPhone 5S.

And finally, smartphones do not have a cooling system, so when the processor overheats, for example, on a hot summer day, a protection will be triggered that disables the control functionality. Here you just need to turn off the device and let it cool a little.

How to prevent it?

If all else fails, you will have to go to the nearest workshop. And there they will either make, probably, expensive repairs, or offer to replace the device with a new one.

Therefore, it is better to follow simple rules that will significantly reduce the risks of such breakdowns.

To do this you need:

1 Protect your smartphone from moisture. Do not leave it near containers of water, use it in a bathhouse or while fishing (in any case, be extremely careful), and also do not talk through it in the snow or rain (moisture will inevitably get into the case or under the screen protection). This is where a headset comes in handy. 2 Needless to say, it is highly undesirable to drop it. For extra protection, it's better to carry your favorite toy in a case, even if it doesn't look very nice. 3 Not all bumpers and protective films perform their functions, and sometimes produce the opposite effect. A low-quality film gets underneath dirt, which scratches the sensor, and an unsuitable bumper itself will wear out the body, and sometimes even interfere with the operation of the screen. 4 You cannot carry the device without a case in your pocket along with metal objects: keys, change, key fobs, etc.

Conclusion

In some cases, the suggested tips help, but it is safe to say that if the sensor has started to work intermittently, then this will probably continue in the future.

Greetings! Let's get straight to the point and start with the main thing - the iPhone, like any other technical device, can “slow down”. Yes Yes Yes! Rumors that this device is completely bug-free are a little exaggerated. On the other hand, there is no point in immediately starting to throw tomatoes and other agricultural products at Tim Cook (the main guy at Apple) and other influential personalities of the company.

After all, often all the “slowness” is the result of some user actions and it’s quite easy to remove it, thereby returning the gadget to the world of speed, speed, lightning-fast response and blue unicorns. Don't believe me? In vain! And now I will try to prove it to you...

So, the main signs of slow work:

1. The desktops are slowly turning over.
2. Programs, games, Internet, videos, music and pictures take a long time to open.
3. General "thoughtfulness" of the device.

We begin to understand the causes and methods of treating all this disgrace. On your marks!

Before you start fighting slowness iOS systems, you should pay attention to the following important points:

1. A completely new smartphone, fresh from the store (from the factory), should not have any of the above, it should “fly”. It doesn't matter what it is iPhone model- an old 4 or a fancy 6 Plus. If this doesn't happen, take it back before it's too late.
2. Before you panic and think that your phone is too slow, watch a YouTube video (any video that shows how the device works) and compare it with yours. It may well happen that you panic too much and wait for some unprecedented speeds, but in fact, this is the case for everyone.
3. It's stupid, but anything happens. Look - the phone is definitely original (about where they are made real iPhones), and not made somewhere in Finland? Despite high quality fakes inside them regular Android- and android and “brakes” are practically synonymous.

Have you looked? Is yours not like everyone else’s, but much slower? And the iPhone is definitely “native”?

Then we proceed as follows:

• First of all, we check the software (it is important that it is the latest).
• We reboot; to be safe, you can do a hard reboot - hold down the “Home” + “Power” keys for 10 seconds.
• We check the free space, it is important that the memory is not filled to capacity; for example, the “other” section really likes to grow.
• If the iPhone slows down while charging, this may be due to excessive heating or data exchange, because, as we know, they are created precisely at this time.
• If a jailbreak is installed, get rid of it.
• As a last resort, reset the content and settings (), do not forget to do backup copy(for example, ) so that data is not lost.

These are, in fact, all the manipulations that the user is able to do independently to rid his device of thoughtfulness. If after them the iPhone continues to work slowly, then perhaps the reason lies in mechanical damage internal parts and it is worth taking it to the service center. Preferably in an authorized one, in “handicraft” they can do even worse things.

And millions of users immediately rushed to update their iPhone, iPad and iPod. And after 20–30 minutes, Apple started receiving angry reviews, like:

• The system is slow!
• My iPhone has turned into a snail.
• It's impossible to work with iOS 10!
• Everything is buggy and slow, I’m rolling back!
• Apple - №%"№%!!

Don't rush to conclusions. Your iPhone can perform much better than it did with iOS 10 on board. Faster, smoother, more productive. Just listen to the following tips:

1. Installed? Wait a couple of hours

Right after iOS installations 10, the device heats up terribly, the interface is drawn with obvious delays, there are bugs and slowdowns everywhere. Calmly! No matter how strange it may sound, this is how it should be.

The newly installed operating system needs time to create a photo cache, Spotlight search, and optimize applications. And this process can take from a couple of minutes to several hours. It all depends solely on how much information is stored on your iOS device.

How to speed up: After installing iOS 10, connect your device to charger and leave it alone for several hours. It is best to leave this process overnight. In the morning you will find that your iPhone has simply begun to fly, and there will be no trace left of glitches and bugs.

2. Turn on “Reduce Motion”

The parallax effect and beautiful animation that accompanies the icons on the desktop when you look at the screen from different angles, tilting the device - all this somewhat affects the performance of not the most recent iOS devices.

How to speed up: Open up Settings -> General -> Universal access-> Reduce movement And turn it on the corresponding slider opposite the item Reduce movement.

3. Turn off visual effects and transparency

Another decoration of the system - transparency, also negatively affects the performance of a gadget with iOS 10 on board. Windows, icons and menu elements look beautiful, but you can live without this beauty, giving preference to speed.

How to speed up: Open up Settings -> General -> Accessibility -> Increase contrast and feel free to turn on the two sliders opposite the items Reducing contrast And Darkening colors.

4. Disable Content Update

Even when your iPhone rests peacefully in your pants pocket or bag, installed applications continue to actively interact with the Internet connection. Data is updated, additional information is loaded and the smartphone is in a constantly loaded state.

How to speed up: Open up Settings -> General -> Content Update and turn off the slider next to the item Content Update.

5. Free up memory

iOS 10 (and any operating system) cannot work stably and quickly if your device only has a few megabytes of free space.

How to speed up: Delete photos, videos, a couple of boring applications or games, don’t forget to empty the folder Recently Deleted from the application Photo. Make sure you have at least 1 GB of free memory on your iOS device.

6. Express acceleration

There is an option that will speed up your smartphone in just a few seconds. We wrote about this method in detail, but just in case we will repeat it.

How to speed up: Unlock your device. Press and hold the Power key until the shutdown menu appears (slider labeled Switch off). Click Home key and release Power. Hold Home until the desktop opens again. Boost has been successfully activated.

These reasons can be easily eliminated yourself at home, in short time. Let's figure out what to do to stop the iPhone from slowing down.

What to do if your iPhone slows down and how to avoid it?

Optimizing the following functions will speed up the operation of the device:

• ● reduce movements;
• ● reduce transparency;
• ● disable visual effects;
• ● disable application updates;
• ● disable Siri suggestions, if you are not using Sportlight.

To produce iPhone optimization Find the “Basic” section in the settings. The first three items are in the “Universal Access” subsection, the last one is “Sportlight Search”. After such manipulations, you won’t remember what it means if your iPhone 6 or 7 is slow.

If you've optimized your settings but the speed hasn't reached the desired level, check your iPhone's memory status. There are a couple of megabytes of free memory left, then there is no reason to be surprised that iPhone 6S slows down or any device. Cleaning can be done manually or using special programs. You should look for files occupying the desired space in the “Other” and “Recently Deleted” folders in the “Photos” section; you should also clean out the “Whats App”, “Viber” and similar messengers folders, they store not only the files you received, but also copies of those sent. Once you've cleared enough memory, don't forget to maintain it. And you can forget what it means that the iPhone 6S is slow.

Launch modern applications on older versions of iOS can cause the device to freeze. In this case, forcibly clearing the device’s RAM will help. To do this, you need to hold down the “Shutdown” button until the shutdown menu appears, then hold down the “Home” button until the iOS desktop appears. This procedure helps if the iPhone 6S or 7 slows down due to an application that is too heavy. However, if you abuse this cleaning procedure iPhone memory not worth it.

If none of the above steps help, and your iPhone still slows down, contact a service center. Perhaps the problem is not in iOS, but in the physical part of the iPhone.

Has your iPhone or iPad started to slow down after updating to iOS 10? But why did this happen? Maybe the device is even heating up too much? If you are asking the same questions, then check out our tips on how to speed up your mobile operating system.

However, before you worry about your smartphone running hotter than usual, running slow, or lagging, you should wait. Yes, indeed, you need to be patient and wait until the system returns to normal. The fact is that after installing a fresh update, the OS must index the files in the device’s memory. Excessive heating of the case indicates that the processor is working intensively. When the process is completed, everything will fall into place

The initial slow speed usually resolves itself by leaving your iPhone or iPad alone for a couple of hours. After installing iOS 10, obviously, the indexing process may take a little longer, since this version of the mobile platform introduced new functionality related to the Photos application.

How to speed up iOS 10 if the system is still slow

I assume that you listened to my recommendations, but after 8-12 hours, is your device still slow after the update? So follow my instructions below to speed up iOS 10 on iPhone or iPad:

Disable effects and animations
Disabling unnecessary animations and effects will reduce the load on the processor and graphics on any device with iOS 10 on board:

Please note that after this you will also not be able to use the new effects in the Messages app.

Give up beautiful visual effects, reduce transparency

Another way to speed up iOS 10 is to avoid resource-intensive visual effects. You can reduce the responsiveness of interactions with Control Center, the lock screen, and notifications by reducing the transparency of interface elements:

Disable background app updates

Update apps in the background using system resources, so disabling this feature reduces their activity, which improves the performance of the smartphone.

This, moreover, allows you to improve the autonomy of your mobile device, so you also get a nice bonus.

Free up memory

You need to be sure that your smartphone or tablet has enough memory, as iOS loses performance and even starts to behave quite strangely when there is not free memory. Provide at least 1 GB of available space.

Reboot your device

If you followed all our instructions, but your iOS device is still slow, then try rebooting it and leaving it for a while.

Nothing helped? Restore or, as a last resort, reset the settings to factory defaults

Have you done everything we recommended above? Then you may want to restore your iPhone or iPad using iTunes, which will clear out any unnecessary junk and cache.

Another method involves a complete factory reset, after which you get a completely clean gadget that will look like brand new. It's worth noting that all your personal data will be deleted, so we advise you to save everything you need before starting.

Let us remind you that iOS 10 is supported by the following smartphones:

• iPhone 7 (Plus)
• iPhone 6S (Plus)
• iPhone 6 (Plus)
• iPhone SE
• iPhone 5, 5S, 5C

And tablets:

• iPhone 7 (Plus)
• iPhone 6S (Plus)
• iPhone 6 (Plus)
• iPhone SE
• iPhone 5, 5S, 5C

There is a stereotype that the iPhone is simply a perfect device and it should not lag. But as practice shows, there are different cases.

Today we’ll dive a little into this topic and I’ll tell you what to do if your iPhone is stuck. I will talk about the most popular reasons and, of course, solutions to this problem.

There will be a real mix useful information, so make yourself comfortable:

What should I do if my iPhone 3, 3GS, 4, 4S, 5, 5S, 5C, 6, 6S, 6 PLUS, 6S PLUS, SE, 7, 7 PLUS lags?

There are quite a few factors that can affect the performance of an iPhone. This device doesn’t jam very often, but it happens and now I’ll tell you more about it.

iPhone memory is full

Most often, on gadgets that are equipped with a small amount of memory, we simply do not notice how quickly it fills up. When the mark reaches the limit, the fun begins.

This doesn't just happen on phones. You may have encountered this problem on computers as well, because after filling the system disk, we get a lagging interface.

We take the device in our hands and go into Settings - Basic - About this device and if your memory is full, then do the following:

1. We simply remove unnecessary software and games.
2. We transfer photos to the PC or simply delete the unsuccessful ones.
3. There is also a chance that your memory is full of cache. If this is the case, then read my article carefully.

These three options will help free up memory on your device and you will immediately notice a difference in speed. In the days of 4S, this was the most common cause lags.

Cleaning RAM

If everything is fine with the memory, but you still notice lags, then perhaps you do not have enough RAM. This most often happens on older devices.

Applications and games are becoming more and more demanding every year and you simply don’t have time to update your smartphone.

There is a small life hack that will help clear your RAM:

1. press the button Shutdowns so that a slider appears at the top of the screen;
2. press the button Home until this screen disappears.

Rebooting the gadget

Oddly enough, there are times when the iPhone just starts to slow down terribly and sometimes even freezes completely.

In this case, the first thing you can do is simply turn off and turn on the gadget. Press the button Shutdowns and then turn it back on.

If everything is bad and the phone does not respond, then we follow this scheme:

• if you have a model including 5S, then press the button at the same time Home(round menu button) and button Shutdowns/Locks(Top) until the apple appears;
• starting with iPhone 6 and ending with 6S - we do everything the same, but now the lock button is on the right;
• Well, starting from the 7th model, everything has changed a little and here we press the buttons Decrease volume And Lock/Shutdown.

As you can see, the scheme is the same everywhere, it’s just that the location of the buttons has changed due to the development of the device, and the iPhone 7 does not have a physical Home button at all. This is the difference with a reboot.

If something is unclear, then read the material. Here I described it in more detail and even with screenshots.

Making effects on iOS easier

Older models most often start to lag due to a newer version of iOS. Therefore, if the methods above did not help, then you will have to sacrifice the beauty of the menu.

The iPhone has effects that make menu animations more beautiful. If you turn this whole thing off, the gadget will work much smoother and, as a bonus, the battery will drain a little slower.

Reduce transparency. There are many elements that have a transparent effect and if you remove it, the situation may improve a little:

1. first of all we go to Settings and then choose Basic;
2. we are looking further Universal access and find the point Increase contrast;
3. activate the slider on the item Reducing transparency.

The effect on the work will be noticeable only in conjunction with the second point to which we will now move on. As for me, set this moment at will, because the beauty of the menu really changes dramatically.

Reduced movement. The iOS menu has a very interesting effect that you can see when flipping through menu pages and when opening applications.

You can turn this off as follows:

1. The same Settings And Basic;
2. Also Universal access, only now further Reduce movement
3. against Reduce movement, make the slider active.

Of course, the beauty is immediately lost, but I think you can endure it for the sake of performance. Everything is not so critical as with contrast.

conclusions

These are the options for solving the problem when your iPhone is just terribly slow and you just don’t know what to do.

I hope you have found a solution to your problem and if you want to follow the news of the site, there are groups on both VKontakte and Facebook. Well, then you already know what to do.

Despite their rather high price in digital electronics stores, smartphones of the iPhone family from Apple very popular in Russia.
But imagine the surprise of some owners of a newfangled gadget when, some time after purchase, they notice that their beloved iPhone... is slow! First in games, then slowdowns begin in other applications. “How so? I bought a very expensive one and powerful phone, but he lacks productivity!” - Many owners think something like this and begin to write angry reviews on the forums.
Maybe they are right in some ways, the price of the device is very high. But, on the other hand, the iPhone is the same computer, with a processor RAM And hard drive. And the same processes happen to it as to a computer - the more games and applications you install, the more you enable various advanced options, etc. - the greater the load on the hardware of the device. And you can load it in this way up to certain limit, after reaching which even the iPhone starts to slow down like a child.
What to do in this case and how to return the device to its former ease of operation? Here are some of my tips.

1. Free up phone memory

One of the main problems on the iPhone is the lack of free space. Even seemingly limitless 128 Gigabytes users manage to fill to capacity. And then they begin to wonder why the phone is dumb?! You can view the amount of free and used iPhone memory in the settings, namely in the “General >> Storage and iCloud >> Manage” section.

The entire list is also shown here installed programs and games sorted by space size. It’s immediately obvious who the biggest consumer is. If you click on the application itself, more detailed information about how it uses the device's memory. We carefully study the fattest consumers. Unnecessary - delete it by swiping it to the left and clicking on “Add”. This is especially true for games and entertainment.

Separately, I want to tell you about Safari browser and related applications. You can clear disk space by clearing its cache and Offline list, which can store a lot of different information left behind:

Speeding up your iPhone

If you already have outdated version phone - iPhone 3, 4 or 5, then their hardware can no longer keep up with the development of the Apple operating system iOS and its functions, the requirements for which are growing and growing. If after iOS updates before latest version If you notice that your iPhone is slow, try the following. Go to the settings section “General >> Spotlight Search” and move the slider to the left to disable Spotlight for applications whose data does not need to be taken into account when searching for information.

As a rule, this can be done for most installed programs, and even more so for games.

The second fan of making the iPhone slow down is visual effect“Zoom”, used to animate program launches. It can be disabled. This is done through “Settings >> General >> Universal Access >> Reduce Motion”:

Move the slider to the left to disable the option. Now the phone will stop slowing down when launching applications.

Don't forget about battery usage

Identify the most powerful system eaters iPhone resources can be determined by their influence on the battery life of the device. This can be done in the “Settings >> Battery” section.

We look at the list of the most gluttonous programs, find those that we do not need or we rarely use them and delete them!

Some installed applications show various messages on the screen. A striking example is clients social networks VKontakte, Twitter or Odnoklassniki. At the same time, they again consume system resources and drain the battery. To fix this, in the iPhone settings go to the “Notifications” section and for each program we select where and when it can display messages.

The included GPS module can load the smartphone and consume a lot of energy. Therefore, I highly strongly recommend that in its parameters, namely in the “Privacy >> Geolocation Services” section, select only the most necessary programs, which can be allowed to determine location.

iPhone tuning program

At the end of the article, I would like to share very good program to optimize the operation of an apple phone. It's called PhoneClean, which, in fact, is an analogue CCleaner utilities, only designed to work with iPhone and iPad. It works simply. We connect the phone or tablet to the computer using a USB cable and launch the utility.

PhoneClean should recognize the device, scan it and suggest ways to optimize its operation. The program has free version, which can carry out basic cleaning and optimization of the iPhone. If you need advanced features, you can buy a license.