iPad 1st generation stuck on iTunes. Restoring iPhone firmware on your own

Cord and iTunes icon It may suddenly appear on the iPhone screen during an IOS firmware update. This error means that during the installation process the connection to the Internet was interrupted or there is not enough memory on the phone to install additional components.

If after iPhone updates asks to connect to iTunes, you will not be able to use the phone normally. The device stops responding to attempts to turn on and launch the desktop. Let's take a closer look at how you can easily fix the update problem and restore your phone's functionality.

The reasons for the error include the following:

• Incorrect installation of new firmware;
• Sudden disconnection of the cord while updating the phone via iTunes;
• Error when trying to install jailbreak;
• Damage or displacement of the Wi-Fi module chip.

Standard recovery methods

If you encounter something like this software malfunction, first try rebooting Recovery Mode. The fact is that the image of the cord and the iTunes icon means that recovery mode is running on the iPhone, however, due to software error it cannot complete. Press simultaneously Home buttons and Power for 15 seconds. Next will happen restart phone, and the error will disappear.

Rollback to backup. For this method you need to do iPhone connection to desktop iTunes app. Next, open the main program window and in the “Restore” field, roll back the phone to a previously made backup copy. This will take 15-20 minutes.

In most cases, all the recovery methods presented above will be able to resolve the error and the iPhone will automatically reboot. However, there are several other reasons why the iPhone asks to connect iTunes.

Exiting Recovery Loop

The cable and the iTunes sign can mean more than just active mode recovery, but also an “eternal cycle” of attempts to do the same recovery, that is, Recovery Loop. In the second case, it is not so easy to remove the phone from this state, because instead of operating system The smartphone reloads the error screen.

You can exit Recovery Loop using the Tiny Umbrella utility. After installing the application on your PC, you need to connect your iPhone to your computer. The utility automatically recognizes the connected device. Then follow the instructions that appear in the main program window to complete the setup. Another application that eliminates the endless Recovery Loop is RedSn0w. Connect your iPhone to your PC. In the main window of RedSn0w, click on “Extras” - “Recovery fix”.

Damage to the Wi-Fi chip. What to do in this case?

If all the methods described above did not help you solve the problem, you can say that the module on the iPhone is damaged Wi-Fi connections. When trying to activate the device, the system cannot find Wi-Fi. Next, the recovery mode and the iTunes connection window are activated.

To fix the problem, you can reroll the existing chip. Remember that poor quality work can lead to damage to more important components of the phone, for example, the central processor.

You cannot replace the chip separately, since immediately after the first attempt to turn on the iPhone, the phone will not be able to identify the authenticity of the part. As a result, you will receive a non-working “brick” that can no longer be restored. The only one effective method repair - replacement motherboard on iPhone.

Any instructions for self-repair You can find your iPhone on our website, or call a specialist for to any place convenient for you.

Y many iPhone users 7 USB cable and iTunes icon will appear on the screen after updating to iOS 10/iOS 11, usually in this case, your device is considered to have already entered recovery mode. After the series " Unknown errors“It came to a black screen with a picture of a cord and an iTunes icon, the service said that there was a problem with the board. Or did your iPhone 7 have a problem with a black display where a cord and a logo icon appeared? iTunes programs, after a forced reboot, the phone does not respond to anything at all and does not turn on or charge. This article is written on what to do, iPhone 7 stuck on iTunes lanyard after iOS updates 10/iOS 11?

Free recovery method using Tenorshare ReiBoot

Free program will solve your problems, iPhone 7 is in recovery mode and after updating iOS 10/iOS 11 is stuck on the connect to iTunes icon, Tenorshare ReiBoot will help you exit recovery mode and your device will reboot itself after a few minutes.

First download and install Tenorshare ReiBoot on your computer. Connect your iPhone/iPad/iPod touch to your computer using a USB cable. Then Tenorshare ReiBoot recognizes your device in recovery mode, click the “Exit Recovery Mode” button. Wait a little and the device will reboot safely. Do not disconnect the device during this process.

Solve stuck on iTunes logo in iTunes

The way to get rid of the black screen showing the cable and iTunes is to restore to iTunes. But it will erase all content, so create backup copy before using it.

• Download and install iTunes on your computer.
• Open iTunes, connect your device to PC using USB cable.
• Wait for it to appear on the screen iPhone images with cable connected.
• Click the “Restore” button in iTunes. The device will start working as usual again.

Fix your operating system with Tenorshare ReiBoot

Normal way– force restart, but after the force restart, which is used to exit the normal recovery mode, the iPhone 7 still continues to load a black screen on which we see the cord and iTunes again and again. This situation means that the iPhone 7 is in the so-called Recovery Loop mode. Getting into the Recovery Loop can happen for various reasons, for example, as a result of errors after updating or restoring iOS firmware 10/iOS 11. Then you need to fix the operating system.

Any owner of an Apple gadget has more than once encountered a situation where the iPhone 5 freezes. What does this mean? One of two things - the screen is frozen and does not want to turn off, or the device does not respond to button presses. But these problems are completely solvable; if your iPhone is frozen, you just need to restart it. And this can be done in several ways, which will be discussed further.

Let's consider one of the common situations when the iPhone 6 freezes. This can also happen with smartphones from Apple of other versions, such as iPhone 4, iPhone 5s, iPhone 6, iPhone 6s, iPhone 7 and others. As experience shows, the user of any iPhone model has at least once encountered a problem when the device slows down and for a long time it is impossible to restore its operation.

So, if you don’t know what to do if your iPhone is frozen and slow, and you can’t turn it off, try a forced reboot. This procedure can be done in any state of the iPhone - both when the iPhone froze during an update, and in a situation where the iPhone froze when resetting the settings.

A forced reboot is performed as follows:

• The first step is to press the “Home” and “Power” buttons simultaneously and hold down for 8-12 seconds. The gadget display should go completely dark.
• After this, press away, and the logo should appear on the screen. If this does not happen, you need to quickly briefly press the power button, and reboot into normal mode will begin.

The method described above allows you to get the system working in extremely difficult situations, for example, when the iPhone 4 freezes during recovery, and also if the iPhone freezes during an update, etc. Moreover, repeated presses of the buttons do not produce results, as do touching the screen - the iPhone slows down and continues to hang , and without reacting to user actions, it works on its own.

In general, a forced reboot is a last resort option when nothing else helps. But if other, less difficult problems arise on your iPhone, it is better to use the methods given below.

How to restart an iPhone if the buttons don't work

According to reviews from users of Apple gadgets, it often happens that the iPhone freezes, and they don’t know how to turn off the device, since the buttons do not respond to presses, i.e. they simply don't work. This happens to models. iPhone phones 5s, iphone 6s, iphone 7 and others. But most often, of course, with outdated versions. For example, when the iPhone 4s freezes, but the device is not turned off, the display works - a very common situation.

So what should you do if the Quad S model is buggy and does not respond to button presses? There is only one way out - use the function Assistive Touch.

To enable this feature you need to:

• Go to the main phone settings in the universal access section.
• Find the item about physiology and motor skills (it is at the very bottom of the menu) and click on “Assistive Touch”.
• On the screen of the gadget version five, 5 ES, iPhone 6s, iPhone 7 or other model you are working with, a special button translucent color.
• Touch this button and the Assistive Touch menu will appear on the display.

That's it, the function is enabled, you can move on to the second and most important stage actions to reboot the gadget in a situation where it is frozen and the buttons do not function.

Any modern iOS device, be it the fifth or sixth version - for example, iPhone 6s, can be disabled not mechanically, but using touch technologies. This is done as follows:

• By clicking on the “Assistive Touch” icon on the device screen.
• Click on the icon that says “Device”, and then long press on the “Screen lock” section. Buttons to turn off and cancel this action will appear on the display.
• Further, the user’s actions are intuitive for everyone - you need to touch the “Disable” icon and the procedure will be carried out automatically.
• To turn on the device, you need to connect it to a PC or laptop via a USB cable, and it will work normally.

Thus, the device was rebooted in 2 stages - through sequential switching off and on. This is one of the most commonly used and fairly easy recovery methods. iPhone performance 6s and other models of the Apple smartphone, if it decides to hang.

What to do if your iPhone is stuck on the cord

This is a problem when the display mobile gadget The iTunes program icon and the USB cable cord appear from Apple - quite common. Users usually consider this situation to be starting recovery mode. But this is not always the case.

In fact, with this manifestation of the iTunes program in interaction with the iPhone, it can mean one of 3 things:

• normal recovery procedure;
• recovery loop mode – obedient;
• Recovery loop mode is naughty.

What does each of the above concepts mean? In the first situation - when the procedure occurs in normal mode - the device will do everything itself. You just need to leave the gadget for a while, and the system will restart itself. If the user urgently needs to cancel this mode, let him reboot the device into forcibly.

But it happens that the iPhone forced reboot does not respond in any way and continues to display the iTunes logo on the screen. This is how the second situation arises - the obedient mode of the recovery loop. It must be said that the reason for the appearance of this mode is often software failures in iTunes. In particular, this often happens during the process of updating the operating system or firmware of the gadget. A loop can also appear as a result of a simple everyday misunderstanding, when the cable is accidentally disconnected during some action.

Why was this regime called “obedient”? Because it is reversible. The device can be restored to functionality by preserving all the data that was originally in its memory. To this end, the user must download and apply one of the many programs designed specifically for this:

• RecBoot;
• TinyUmbrella;
• iReb and many others.

And finally, the third mode is naughty, which also arises due to problems with iTunes. This situation is more complicated because here the user will not be helped either by the special programs mentioned earlier, or by the procedure of forcibly rebooting the system. No matter what the owner of the smartphone does, the cord and the iTunes logo continue to remain on the screen. Of course, all data stored on the gadget was irretrievably lost. It’s good if the user foresaw the situation in advance and made a backup. If not, all that remains is to regret the lost data.

Having caught such a loop, all that remains is to try to flash the device. This procedure is difficult, and the master does not always succeed the first time, but it is quite possible. Often standard scheme firmware does not help and has to be applied special program– DFU. Information previously stored on the gadget is permanently deleted, and all data is restored from a backup, if there was one.