Deep cleaning windows 7. Manually deleting temporary files via command line

Youtube

I bring to your attention another article from the Windows 7 section. Today we will look at how to clean up a local hard drive using the operating system itself. In addition, I will show how to configure the operating system to periodically automatic cleaning logical partitions.

Why is it necessary to clean up the disk? The answer is very simple. The operating system is something like a living creature. Just get it right. This means that it is constantly in motion (dynamics): processes, services, programs are started/disabled, files are moved. Because of which A lot of unnecessary information often accumulates on the local disk(s) of the computer. Unneeded means that it will no longer be needed by the user or the operating system for any purpose.

A information, as we all know takes up free space, which you can use for your needs and purposes. In addition, the accumulation of unnecessary information on the computer can ultimately lead to unstable work.

I note that the system will not necessarily start to slow down or freeze if you do not clean up the disk, the risk simply increases. Moreover, the cleaning process, which allows you to delete temporary files, empty the recycle bin, browser cache and other unnecessary information, takes very little time and patience.

So why not do it? this operation? And any previously unfamiliar work ultimately becomes an experience that is so needed in our time of information technology.

But let's proceed directly to the disk cleaning process itself..

Let's launch command line. To do this, open “Start” – “Run”

Rice 1 . Execute

Enter the command into the command line cleanmgr and press Enter.

A selection window will open disk for cleaning. Select the required drive (for example, system drive C, i.e. local disk, on which the operating system is installed).

Fig 2. Selecting a disk.

The cleaning program will first perform search for files that can be deleted.

The Disk Cleanup window will open.

Fig 3. Removing unnecessary files.

Each type of file that can be deleted has a description below. If you are not sure about your choice, I recommend reading the description first.

Go to the “Advanced” tab.

Figure 4. Additional disk cleaning.

As can be seen from the figure, release extra bed on disk in several other ways:

by removing unused programs (section Programs and Features);

by deleting old system restore points (System Restore and Shadow Copies).

If you click on the “Cleaning” button opposite the “Programs and Features” section, the operating system control panel window will open Win systems dows 7 called Programs and components. With this application you can manually remove unused programs.

If you click on the “Cleanup” button opposite the “System Restore and Shadow Copy” section, a window will open in which you can delete restore points (if they were previously created), and also shadow copies files.

On the “Disk Cleanup” tab, mark which files need to be deleted. And click Ok. We confirm our choice. Will begin process of removing unnecessary files.

Time interval this process depends on the amount of unnecessary information, computer settings and system load at the moment, but does not last long.

Automatic cleaning of hard drive logical drives.

To perform this operation we use task Scheduler, which is a component of the Windows 7 operating system. Using the scheduler, you can schedule a task to run automatically (at a certain time or when certain events occur)

To open the task scheduler, go to “Start” and click on “Run”. In the window that opens, enter the command taskschd.msc. Click OK

Fig 5. Task scheduler

Select “Create simple task” menu item “Action”.

Fig 6. Create a simple task.

Operating a computer is a complex process that involves many processes and, accordingly, data that often remains in the system even when not in use. This article is devoted to cleaning Windows 7 in 2 different ways.

How to clean Windows 7 using standard means

In order to clean Windows 7, It is not necessary to use third-party utilities; you can use the capabilities of the system itself. To do this, go to Start -> All Programs -> Accessories -> Utilities -> Disk Cleanup. You can also open start in search bar enter the phrase “disk cleanup”, the system itself will find the function you need. A window will appear on your screen in which you can select all the actions you need.

First you need to select the disk that will be cleaned (provided that there are several of them) and wait until the system evaluates what can be cleaned and what cannot.

How to clean Windows 7 using CCleaner

Very often there is such a situation that standard applications Windows 7 do not give the desired result. In this case, you can use programs that are specially designed for this. Using professional products can you answer the question, how to clean windows 7 ?

One of the best and most functional is CCleaner. You can use it not only to rid your hard drive of unnecessary garbage, but also do the following:

The computer uses . It loads virtual memory with unnecessary information. CCleaner will help you clear your clipboard.
The quality of work and speed of Internet traffic are affected by cache and cookies. In order for your computer to work quickly, you need to clean its virtual memory. The program will handle this perfectly.
Even deleting garbage into the recycle bin does not rid the PC of it. Regularly emptying the recycle bin will add memory to your smart machine. At CCleaner help you can clear the storage Windows

We have not listed here all the possibilities that it has. specified program. She is very comfortable. In addition, it can not only clean your computer from large quantity files. CCleaner will automatically scan your hard drive, and then it will suggest actions that will allow your computer to run faster.

Sometimes users install new Windows 7, but forget to delete the old one. There is nothing critical about this, however old Windows takes up a lot of space. This article contains information on how to remove old Windows...

Many people notice that over time, the space on the Windows system disk becomes less and less, even if you do not install any programs there. In this article, I will try to describe the most common reasons for decreasing space on the C: drive, as well as talk about methods for solving this problem.

Folders Desktop, My Documents, My Music, My Pictures, Libraries, Downloads (the last two in windows 7)

These folders are located on the C: drive by default. Sometimes, unbeknownst to the user, many files can accumulate there, which together can be large. Even if you don’t save anything there yourself, other programs can put something there, for example, games can store their saves there. In order to free up the system drive, in the properties of these folders you can change their physical location and set, for example, drive D:.

The windows temporary folder is clogged (temp folder)

On different systems it can have different locations. You can go to the temporary windows folder as follows. First you need to open a command input window. This is done like this:

Start -> Run (if you have XP)
Start -> All Programs -> Accessories -> Run (if you have Vista or 7)
Also for everyone windows versions you can just use the combination Win + R

Now in the window that appears, enter %temp% and press Enter. windows will open the temporary files folder. As a rule, everything that is there can be removed painlessly. It’s just better to close everything first open source software, because they can use this folder at this time. You can also clean this folder through the "Disk Cleanup" button in the disk properties in the "My Computer" folder. Better yet, use special program for cleaning the system, for example CCleaner.

Pagefile.sys and hiberfil.sys files

The first of them is the paging file; it is used by the system for intermediate storage of data from running programs if there is not enough RAM for this. This file is reserved by the system, usually its size is equal to the size of the installed RAM. If you have a large amount of RAM, namely 4GB (preferably 6GB), you can try disabling the use of this file (this may even speed up performance). This is done like this: My Computer Properties -> Advanced (Win XP) / Advanced System Settings (Win 7) -> Performance, Options -> Advanced tab -> Virtual Memory, Edit (for Windows 7). Note: if, after disabling the use of the paging file, Windows messages appear stating that there is not enough memory, then you need to enable this mode back

The second file is a file that is reserved by the system for sleep mode (hibernation mode), its size is always equal to the amount of RAM. This mode will allow you to quickly turn off your computer without having to close programs and save files, and then just as quickly resume work. By default, sleep mode is disabled for Windows XP, and enabled, as far as I remember, for Windows 7.

This mode is controlled through Control Panel - Power Options - Sleep Mode (for Windows XP).

In Windows 7, you can enable or disable this mode by clicking Start -> typing cmd -> Right click and Run as administrator. And then you can enter the commands powercfg hibernate off or powercfg hibernate on to disable or enable this mode, respectively.

Browser cache gets clogged

Every browser has a folder that it uses as a cache. This is necessary to speed up page loading - web page elements and other files are loaded only once, and the next time the request is made, the file is taken from the cache. Sometimes this folder gets large and needs to be cleaned out. The cleaning window looks approximately the same for different browsers: Firefox, Chrome, Internet Explorer latest versions, it can be launched using the key combination Ctrl+Shift+DEL, in Opera through Menu -> Settings -> Delete personal data, in Safari through the settings button -> Reset Safari. Keep in mind that other parameters, such as cookies, are also deleted through the same window. active sessions and saved passwords, deleting them may lead to the need re-enter passwords on all sites. If you don't want this, just uncheck the corresponding boxes. You can also do this cleaning using the above-mentioned CCleaner program.

The size of system restore checkpoints increases

Restore checkpoints may be needed if something goes wrong on your system: for example, some driver crashes or something happens. virus attack, or some other serious failure. Naturally, this function requires additional space (if the display hidden files and folders are enabled, then perhaps you have seen folders on local drives called System Volume Information - this is where these points are stored). System Restore can be disabled completely, but I don’t recommend you do this, not much can happen. But you can delete outdated points like this: My Computer -> right-click on the local disk -> Properties -> Disk Cleanup -> Advanced -> System Restore -> Clean -> Yes. All but the last restore point will be cleared.

Some programs create different files and do not clean up after themselves

In addition to the temporary folder, many programs can create their files in other places. CCleaner can help partially solve this problem and clean up the storages of some popular programs. But, unfortunately, only some. In addition, sometimes even after uninstalling a program, files that the program created remain on the system. These files can be located on the C:\ drive, in the windows and Program Files folders, in the user profile folder, or somewhere else, and they can be difficult to locate, so there is no universal recipe for deleting all such files.

However, there are many different file types that are reserved specifically as temporary. If the file has the extension bak, bac, old, tmp, old, dmp, shd, log, etc., then with a high probability it can be safely deleted.

Please note that I wrote “with a high probability”, but not 100% - after all, there is a certain risk that you are using not very high-quality software that can store intermediate data in these files, so after deleting them something will work with errors ( smart developers will never use these extensions to store the necessary data).

If you still want to scan the disk for the presence of such files, you can use the FreeSpacer program.

I can also advise you to use programs for analyzing disk space, for example WinDirStat. With the help of such programs you can find out which folders take up the most space.

winsxs folder (windows 7 and Vista only)

Windows 7 and Windows Vista have a service folder that can grow over time and take up a lot of space. But this is probably a topic for a separate article, and only experienced users should do this. They can easily find information on the Internet about reducing the size of this folder and whether it is worth doing.

Other

In addition to the above, windows can create additional files, which can be found My Computer -> right-click on the local disk -> Properties -> Disk Cleanup There may be various elements that usually take up little space: ActiveX and Java files, thumbnails, user report archives, temporary windows installation files, etc. P. Usually they can be deleted without problems through the same menu. By the way, in this list in Windows 7 I found a rather large element: files backup copy update package. These files were created after installing the package Service updates Pack 1 took up almost 600MB (as it was displayed in the list), they allow, if necessary, to roll back and remove this update package. If you installed the update package separately and think that you will not need to roll back, you can delete these files. I won’t say for sure, but I got the impression that after deleting these files, much more space was freed up than 600MB (4 gigabytes!).

SoftLakeCity.ru

Disk C is full. What to do and what can be removed?

Hello dear friends! Now I will talk about a problem that probably everyone has encountered. This is when drive C is full, and I will tell you what needs to be done in such cases, and what can be deleted without damaging windows work. I have been asked more than once what can be deleted from drive C, otherwise it is full to capacity, and the system shows a warning window.

Let's go in order. Why drive C? Because it is on this disk that in 99% of cases the operating system is installed windows system and it doesn’t matter whether it’s Windows 7 or Windows XP. During the Windows installation process, we divide the hard drive into partitions; I wrote about how to do this in the article “How to partition new hard disk at windows installation 7” Be sure to partition the hard drive, do not make one partition for the system and for storing files.

We create a partition and set its size. The point here is the culmination, depending on how much memory you allocate to the local drive C, the time it will take for it to be completely full depends. Previously, I always allocated about 30 GB for the C drive, but almost all computers now come with hard drives ranging in size from 500 GB to 1 TB. And in such cases, giving the system 30 GB for the C drive seems stupid to me. I’m currently giving away 100 – 150 GB for the system disk.

But as practice shows, even these 150 GB fill up very quickly and drive C turns red, which means that it is completely full, and then the questions begin: what can be done, what can be deleted from the local drive C? Although I always say, don’t save any videos, photos and other heavy files to the system partition. Yes, and it is advisable to install games on other partitions; now there are such games that they take up several tens of GB.

What is the danger of a full C drive?

Nothing bad should happen. The computer will work slower, Windows will warn that there is no memory on the system disk. In short, there will be many unpleasant moments in the operation of the computer. Do we need it? We'll decide :).

What can you delete from your local C drive?

This is probably the most main question in this situation. Many people want to delete information, but are afraid to delete something they need. After all, the operating system is installed on this disk, and many are afraid of harming it.

You know, I have seen many computers in which the disk on which Windows is installed is filled to capacity. Well, there’s a lot there, it’s on almost all the computers I’ve encountered. And you look to remove this unnecessary thing, and it seems like everything is needed :), sound familiar?

1. First of all, it is worth remembering that all information that is stored on the desktop, in the “Documents”, “Pictures” and “Music” folders, is stored on the local drive C. Be sure to check these folders first. If there are heavy files there, such as movies, music, photos, etc. Then move them to local drive D, well, or E. In most cases, these folders store files that fill partition C. And I also don’t Since I came across a bunch of movies on my desktop, is it really that difficult to copy them to another partition?

Go to “My Computer” and click “Uninstall or change a program” at the top. A window will open with a list of installed programs and games. Click on “Size” to sort the list by the size of installed programs and games. Remove everything you don't need, I'm sure you'll find something like that. If there are very heavy games, then remove them and install them again, only selecting a different partition for installation.

3. Remove garbage from the system. If windows was not reinstalled long time, then several GB of garbage and temporary files were probably already collected there. In order to remove them, you can use a good CCleaner program. I always clean my computer with this program from time to time. You can download it on the Internet, just type “Download CCleaner” in Google. Install the program and start cleaning the system. I will not dwell on this in detail now; I will write about this program later.

4. Empty the trash, as an option to free up a couple of MB :).

These are the main (in my opinion) methods, by doing which you can free up quite a bit of memory on the local drive C. You can also disable, or move system recovery to another drive, or move the paging file, but it seems to me that these are not very effective options and They should be used as a last resort.

To summarize everything written above, I want to say that it is possible to prevent the local drive C from becoming completely full. And this is very easy to do.

Are you copying or downloading a movie from the Internet? Don’t be lazy to select drive D, E, or whatever you have for saving. No need to save it to your desktop. Install the game, change the installation location from drive C to another partition, this is a matter of a few seconds, but in the end it will help protect the system disk from redness and provide stable work computer.

Also, when saving files to partition C, it is worth remembering that in case of problems with the operating system, you can lose all the files. Because when installing Windows, partition C is usually formatted. I think you will also be interested in reading “How to increase the size of drive C using another logical partition?” It should come in handy.

And finally, defragment the disk; this will hardly increase memory, but it will restore order, and the computer will work faster. Good luck!

f1comp.ru

How to clean drive C (Windows 7) from unnecessary files and garbage? How to properly clean up drive C (Windows 7)?

Every PC user has at least once encountered the problem of low disk space. When such a situation occurs, a person begins to frantically remember what information he will no longer need and what can be deleted in order to make the next update or install the necessary program. Famous tweakers and cleaners may be able to help you, but they often do not work very correctly.

In this article, you will learn how to clean up the C drive in Windows 7 (64-bit system).

Removing junk using Disk Cleanup

How to completely clear drive C (Windows 7) so as not to disrupt the system? Disk Cleanup is one of the most safe programs among all the tools that help get rid of computer junk. With its help, you can clean your hard drive, but it is almost impossible to delete anything important, since a warning signal will be received. Other utilities offer quick cleaning, but cannot offer any security guarantees.

To understand how to clear drive C (Windows 7) of unnecessary files using the Disk Cleanup function, you need to understand what this function is for. With its help, the number of files that have not been used for a long time, but are located on the hard drive, is reduced. Such measures lead to increased computer efficiency. All temporary and unused system files will be deleted and the Recycle Bin will be emptied.

You need to start working by launching the program. To do this, go to “Start”, select “All Programs”, go to “Accessories”, “System Tools”, and then click “Disk Cleanup”. In the "Disk Cleanup Options" window that opens, select what you want to do: clean personal files or all files that are on the device. If you are prompted for a password, you must enter it.

In the "Disk Cleanup" window, you need to go to "Select Disk" and determine which disk will be cleaned. After that, click “OK” and check the boxes next to the selected files. This action must be taken responsibly so as not to delete important files. After this, you must confirm the cleaning.

The Advanced tab includes two more methods that let you free up space on your hard drive. But it is only available if the option to delete files for all device users is selected.

The next step leading to knowledge of how to clean up the C drive (Windows 7) is to open the “Programs and Features” item, which is located in the Control Panel. In it you can delete everything that is not used. In the "Size" column you can see how much disk space each program takes up.

With System Restore, you can use restore points to return to more early state to make a refund system files. If the computer's performance is up to standard, previous return points can be deleted, this will save disk space.

Removing "garbage" manually

To know how to properly clear drive C (Windows 7) of unnecessary files manually, you need to have information about where the temporary folders are located. They can be found at the following addresses: "%windir%\Temp" or "%ProgramData%\TEMP". For everyone using the device, it is "%userprofile%\AppData\Local\Temp".

Files located in these folders can be deleted without problems. If you try to uninstall an important and necessary program, Windows will not allow you to do so.

Windows "Search Services" and reducing the file

Cleaning up drive C (Windows 7) can be done using the Windows Search Service; it caches all information about files on hard drives and transfers it to the database, which is located in the folder "%ProgramData%\Microsoft\Search\Data\Applications\windows\" and is called "windows.edb".

The thing is that if the amount of data on hard drives increases, then the database file also increases. It can be several GB. Those users who do not use search very often hard drives, can free up space using the following method, which will not only make the file smaller, but also be able to keep track of its size.

You need to enable "services.msc" and set "Window Search" to disabled. After renaming the file, you should run it again. In the "Indexing Options" you need to click "Change" and select the appropriate mode, and then confirm all actions.

Working with file size

How to clean up drive C (windows 7) and free up space on it? This can be done by reducing the size of the paging file and also relocating it to another drive. Optimal sizes depend on the features of your device.

Cleaning the installation

Most updates that are installed on a computer tend to leave installation programs in separate folder. This leads to its size increasing significantly. You should not completely delete these files; such a measure may lead to incorrect operation of the device. But if free space is urgently needed, then removing them will be the way out. In the future, you should use software distribution kits or remove applications.

Antivirus software

It is better to explain clearly using the example of the popular antivirus "ESET NOD32". When it finds infected files, it sends them to the “Quarantine” folder. Its location may vary, so you need to look at your specific computer.

If there are a huge number of such files, the folder size will increase. You can solve this situation by clearing the "Quarantine" folder.

Disabling sleep mode

There is a file "hiberfil.sys" on the system disk, which always takes up space. Depending on the configuration of your computer, it can reach different sizes. If you don't need hibernation, you can always turn it off. But you need to do this in sleep mode.

To do this, you must log into your computer using administrator rights. On the control panel you need to select "Go to sleep mode". You need to click in the context menu to create a shortcut. In the field that opens, enter "powercfg -h off". Then confirm your actions. Next, you should run the shortcut as an administrator and agree to the actions in the “UAC” request.

Another necessary advice, how to clean up drive C (Windows 7) to free up space on the system partition. To get rid of possible problems in the future, it is necessary to control the availability of free space. This applies to user folders.

For this method to work, you need to have several hard drives or partitions on them that will be located on the same computer. It is more advisable to carry out this procedure immediately after reinstalling windows. This is due to the fact that there should always be free space left, which is necessary for defragmentation. It can be carried out either automatically or if necessary. Defragmentation not only reduces wear and tear on the hard drive, but also improves the performance of the computer as a whole.

After installing (which requires drive C) Windows 7, you need to create several system folders. They must be placed in the root directory. Some of them may not be displayed. But the necessary one, "Users", is always visible.

After entering this folder, you can see all the names. The number of users may vary depending on circumstances. You need to select the folder that is named after the user you need. This is where all personal documents and user data will be located.

Almost each of these folders will grow in size as you add photos and other files. If you pay attention to the picture, you can see which one is overfilled and requires cleaning.

The folder that is filled as a result various downloads, it is more advisable to remove it from the hard drive and move it to another location. To do this, you need to cut it out and transfer it to next disc, which has more free space. On this disk you need to create a folder with the user name and paste all the data there.

If there are many users, this procedure must be done for each. This will allow you to control the system partition and also improve the performance of the entire system.

fb.ru

Disk C is full: what to do and how to clean it?

It doesn't matter what capacity the hard drive installed on your computer has. Sooner or later the time will come when the free space on the hard drive approaches a critical minimum. And if you are reading this article, it is quite logical to assume that you are faced with some kind of trouble, which can be succinctly characterized by one short question: “Disk C is full: what to do?” Probably, on top of everything else, you began to be overcome by various system messages, popping up on your monitor screen with predictable frequency for some time now. Finally, the computer slows down seriously, and only memories remain of its former performance. Well, it's time to act! Determination coupled with attention, as well as the effective methods described in the article, will help you cope with the digital problems that arise with the ease inherent in experienced users.

When drive “C” is completely full, you need to clean it of “digital garbage”

The fact is that the operating system, during its operation, constantly saves certain temporary files in specially designated areas of disk space, where quite significant amounts of data can accumulate. As you understand, such folders need to be cleaned periodically.

Note: hereinafter all descriptions and action scenarios are designed for use in the operating room windows environment 7. However, given the universality of the presented methods, literally all the material in this article is applicable to other Microsoft operating systems.

Let's start implementing our plans

However, the problem raised is "Disk C is full: how to clean it?" requires further consideration.

Where do gigabytes go: system restore checkpoints

No one denies that the “system rollback to a stable state” function implemented in Windows is a truly useful and often in demand operating tool. However, everything should be in moderation. However, the default settings provide for a non-stop saving process system copies. After regular OS updates, critical changes in the registry, and also according to the established schedule, special windows the service sends a control “cast” with pedantic precision operating environment to backup storage. If we take into account the fact that most of these copies will never be used, we can conclude that disk space, as a result of excessive reinsurance, is simply wasted, which leads to the fact that the user begins to think about resolving the issue: “Disk C is full : what to do?".

Log in to your control panel.
Activate the "System" section.
Follow the link located on the left side of the “Protection...” service window.
Select the system drive and click on the “Configure” button.
After you click on the “Delete” button, everything will be erased from your hard drive. control points recovery.

Attention: this action is not recommended for those who often resort to the rollback functionality. But nothing prevents you from reducing the reserved volumes to 3-6% of the total capacity indicators system partition. In this case, copies of the control points that were last saved will remain.

Virtual memory reserves: is the paging file size justified?

So, now you know what you need to do first when the graphical occupied space sensor in Explorer shows that drive C is full. However, in order to achieve the maximum possible release of system space, you should resort to one more method - move the paging file directory to another location, or reduce the size of the reserved area of the hard drive.

Open the Control Panel menu.
Go to the "System" section.
In the left part of the working window, activate the “Advanced...” item.
In the “Performance” block, click on the “Options” button.
Open the "Advanced" tab.
Click on the “Change” button.
Select the system drive and uncheck the “Automatically select...” checkbox.
Activate the "Specify size" option.
Based on the actual amount of physical memory, specify a value equal to the RAM capacity parameters.
Confirm the change with the “Set” button and restart the computer.

When transferring virtual memory another hard section disk, you must first activate the “No paging file” option. Then you need to select a new directory and repeat the above process. Well, it's time to move on to the next step in solving the “Drive C is full” problem. What to do next?

Clearing the system log and more: software “helpers”

When installing various software, as well as during its use, the Windows OS constantly saves parameters and settings changes made, and therefore the volume of registry data is growing. However, not all entries in the system log can be considered necessary. So, in the case of performing the process of uninstalling a program, some (and often the value is expressed in significant megabytes) system information about the uninstalled object continues to take up much-needed space for the user, so to speak, in vain. Unfortunately, if you need to correct such an unfavorable situation as “drive C is full,” Windows 7 (like any other Microsoft version of the OS) is powerless, since it does not have a standard registry cleaning software tool. Therefore, it is necessary to enlist the support of a specialized program.

CCleaner - free but effective

Download and install this application to your PC.
Open the “Register” section that interests us.
Click the "Search for Problems" button.
After a short scan, activate the “Fix” button.

You can be congratulated - a practical answer to the question of whether drive C is full: what to do, received. However, not quite in full. Therefore, dear readers, we follow further.

Hidden threats: what fills disk space

The process of discovering something new is itself malicious code For an experienced IT specialist, this is an incredibly time-consuming task. The average user can only guess what kind of virus is filling the C drive? Agree, this is a somewhat difficult situation? However, the problem can be resolved using one or more special antivirus utilities, capable of detecting and destroying this kind of “digital infection”.

Well, open your browser and download these applications: AVZ, Dr.Web CureIt!, HitmanPro, Malwarebytes Anti-Malware(MBAM) and Kaspersky Virus Removal Tool 2015. They are all good in their own way, and each of them has its own shortcomings, which is understandable. After all, as you know, there is nothing ideal in the world. Therefore, to achieve maximum effect thorough cleaning and in order to get an effective result, use two or three utilities in succession. By the way, all of the above antivirus tools are equipped with an intelligently understandable interface, and even if you are new to computer field, you will be able to cope with debugging and launching scanning functionality. Remember that inactive assumptions like: “Why is drive C full?” - a waste of time. Try, try, and you will succeed!

Finally

So, now you know where to look for missing gigabytes of disk space. However, you should not overuse some of the cleaning methods described. Especially when it comes to the swap file or an intensively used registry repair service. Only a reasonable approach and justified actions when performing the optimization process can guarantee you stability in the operation of your OS. Now you have necessary knowledge and have a clear idea of how to react to a difficult situation if drive C is full. How to clear it of accumulated “digital garbage” and how to neutralize it virus threat, you should already understand. However, don't stop there. Improve your knowledge and expand your computer horizons. All the best, use your hard drive efficiently!

fb.ru

Cleaning drive C from unnecessary files and freeing up space

Sooner or later system units and laptops become clogged with unnecessary unnecessary information. How to clear drive C of files and programs if you have already noticed that your computer is running much slower than in the first days of purchasing it?

The volume sometimes takes up more disk space than the necessary programs and files. This affects the performance of the PC, it noticeably decreases, programs begin to take a long time to respond to given commands. Moreover, it is not at all necessary to constantly load your computer with games, applications, and files. PC disk space can become clogged from surfing the Internet without downloading unnecessary programs.

Do not rush to call a specialist, but check the disk space yourself. Right click: 1. Start,

2. Computer.

Find the local drive (C:) and left-click on it, selecting “Properties” from the proposed list.

A window will open with a “general” tab, where you can view information about free and used space.

If the “Free” line indicates a small amount (less than 5 GB) of free space, then you need to clear the contents on the disk.

You need to start cleaning the disk with the most popular folders: 1. Favorites,

2. Libraries.

Cleaning the Favorites and Libraries folder on the drive (C:)

Right click: Start,

Computer.

Find the “favorites” folder, which includes the main subfolders: “downloads”, “desktop”; and additional ones, depending on the installed programs, for example, Yandex.Disk and other cloud services.

Now you can open one subfolder at a time and, without regret, delete all unnecessary files from there. The downloads folder can be completely freed because it stores information that is already on the computer. These are different archived rar and zip programs, which have already been unpacked and installed on the computer. There are probably unnecessary shortcuts from them on the desktop. There are also old downloads that have long been deleted from the desktop due to uselessness.

Check the “desktop” folder in the same way. It contains everything that you are used to seeing on the monitor. You may have unnecessary files or folders there.

The remaining files: pictures, music and programs from the “Favorites” folder, which are used extremely rarely, but for some reason they are needed, it is better to transfer them to separate disk, flash memory or upload to any cloud space: Yandex.Disk, Mail cloud. This will free up a significant amount of disk space.

Now go to the “Libraries” folder and free up the subfolders as much as possible: Videos, Documents, Images,

The remaining material can be transferred to a separate disk. The cleaner the drive (C:), the more productive the PC.

Take care of free space in advance so that it becomes less clogged in the future. You can transfer most of the subfolders from disk (C:) to (D:), which, as a rule, lies empty when the main disk space is completely full.

Subfolders: downloads, desktop - can be safely sent to disk (D:). Go to the properties of each subfolder, in the “general” tab, change their location from C:\Users\ADMIN\Downloads and C:\Users\ADMIN\Desktop to D:\.

Cleaning the temp folder (windows temporary folder)

In the temp folder different programs store their temporary files. "Temporary" in in this case it is assumed that these files are unnecessary and can be safely cleaned. This folder needs to be cleaned periodically, because some programs delete their files, and some do not. Over time, the folder can become clogged with garbage and take up to 20 GB of memory.

The easiest way to clean your computer is to run a special program. Today there are many of them, among them the most famous are Glary Utilites and CCleaner.

If there is no cleaning program and you don’t want to install it, clean it manually. To clean it, you need to go to the temp folder, which is located on disk (C:), but before that you need to close all running programs. Depending on your PC's operating system, choose one of the following:

For XP: “Start”, then “Run”; For Vista and Windows 7: “Start”, “All Programs”, “Accessories”, “Run”.

In the line that appears, enter the command “%temp%” (without quotes), click “ok”.

A folder will open with a never-ending list different files. Delete everything, nothing bad will happen.

An even easier way to clean it is to click on the “clean disk” button. It is located in the “properties” of drive C, called up using the left mouse button.

Clearing cache

Modern browsers cache viewed Internet pages, that is, store copies of them in memory. This makes sites you visit frequently load faster, so it's a convenient feature. Over time, memory becomes clogged, information about new pages is not cached, and this leads to slow loading sites. The internet seems to be slower than usual. To view photos or videos, you have to wait a long time for loading. All this data must be deleted.

Thanks to the cache clearing operation, you will delete copies of pages from old sites from there, where you will never return. True, along with caching of old pages, information about new ones will also be cleared. But it's not scary. Current sites will be saved in memory again.

The easiest way to clear the cache is to use the aforementioned CCleaner program. It is worth considering that when clearing the cache, information about logins and passwords is deleted if you overlook and do not uncheck the “logins and passwords” field.

The cache can be cleared in the browser itself. This is done differently in different browsers. Let's consider everything.

Google Chrome browser

Sequence of actions: 1. Press Ctrl + Shift + Del simultaneously;

2. In the window that appears, select the files needed for cleaning;

3. Clear history.

Opera and Mozilla Firefox browsers

The command and actions in two browsers are similar, as in Google Chrome.

Internet Explorer

1. Find “service” in the browser panel and click the mouse. 2. A menu will appear in which you need to find the lines “internet options”, “general”, “browsing history” in order.

3. Check the box and click “delete”.

4. In the window that opens, check the boxes required for deletion and click “delete” again.

Deleting recovery checkpoints

The default feature of the computer operating system is to create checkpoints to restore previous states. They are vital when a crash occurs accidentally, or a necessary program with a driver is mistakenly deleted, or when downloading some free utility the computer gets a virus.

Thanks to checkpoints, you can restore previous state computer from service data recorded by the operating system on the hard drive (C:), without losing important documents.

Depending on the settings, control points can be created with enviable regularity: from once to several times a day. Over time, this leads to the disk becoming clogged with irrelevant information. That is, if your PC is already 5 years old, there is no point in storing unnecessary files about the state of the computer from five years ago. The operating system only needs the points it has made over the last 1-2 months or 1-2 days, as desired. Feel free to delete the rest, as the information sometimes takes up more than 14 GB.

To perform the operation and free your PC from garbage, except for the very last points, you need to do the following: 1. Start 2. My Computer 3. Properties 4. System Protection 5. Configure 6. Delete

Removing unnecessary programs and components

The method is suitable for experienced users, but since the computer can be restored from the last save point, a less experienced PC user can try it.

Removing unused programs or games will free up a huge amount of space.

You need to select: 1. Start, 2. Control Panel,

3. Programs, deleting programs.

A list of programs will appear. You need to analyze the programs and remove all that you have not used for a long time.

Not all programs remove their components when uninstalled, so you will have to manually go through the list and remove everything.

When analyzing each program, many are guided by the size of the files, deleting only large ones. Some programs do not show the size. This creates the false impression that it weighs zero kb and is not particularly in the way. It's better to remove it if you don't use it, because it can weigh several GB, or just slow down your computer.

Preferably after each remote program and components, immediately save the checkpoint. This will help you in case of removal of the necessary component - to return the state of the computer that was before, but not long ago. Otherwise, several hours of work on removing programs may go down the drain.

Expanding your computer's memory

To quickly clean up the disk (C:), if you don’t have time to think about each program, you can buy an additional terabyte hard drive and transfer everything to it.

You can also rent space from cloud services, transfer all available information to third party drive. Majority cloud storage provide quite decent volumes free memory absolutely free.

For more convenient disk analysis, use the free program WinDirStat or similar. Thanks to it, you can scan your hard drive and find out what types of programs and files are and how much space they take up. If you are a torrent user, then with the help of WinDirStat you can easily see and get rid of unnecessary old movies and programs that lie on the disk like dead weight and take up terabytes. In addition, WinDirStat can show how much disk space a program takes up, even if this information was hidden from you.

How to delete a folder if it is not deleted Windows 7

As you know, timely cleaning of Windows will be the key to high performance of your computer and the versatility of its software resources. We have reviewed best programs, capable of performing a complete cleaning of the system. Which of the above utilities should you choose?

The undisputed leader among computer system cleaning programs is Computer Accelerator. This program has amazing capabilities that are only partially available to other analogues. Manage the cleaning process and optimize it to the highest possible quality Windows registry and get rid of any software glitches and problems that have been bothering your computer for a long time. The Computer Accelerator is able to quickly increase the performance of all computer resources, ensuring reliable stability and multifunctional performance of all its important system resources!

System Mechanic can be recommended for both beginners and professionals, however, specialists will like the product more. Its reliability and quality captivate, but it’s only a slight hindrance English language on the menu. In the West, the utility package is widespread and popular; development has been going on for more than 20 years, so all functions have been honed to perfection.

An inexpensive alternative is Wise Care 365. The software features the most convenient controls in comparison with analogues, powerful means ridding the system of computer debris, as well as an optimal ratio of the cost of the license and the high quality of the productivity tools offered by the developer.

CCleaner is one of the most common computer junk and junk cleaners in the world. The utility gained its popularity thanks to convenient interface and rich built-in capabilities. Owners of CCleaner receive virtually the entire list of most paid modern analogues among “cleaners” and “optimizers” of the operating system. Using Advanced SystemCare Free, will help you not only clean up the platform, but also seriously overclock the power of your computer. Thanks to the presence of a whole range of specialized tools, the program can increase the performance level of RAM and processor, which will have a great impact on the performance of the entire OS.

In addition to the common functions of cleaning the system from unnecessary and damaged files, Glary Utilities, will provide you with proper protection for all confidential data, increasing not only the performance but also the security level of the operating system. The program can even correct incorrectly entered links, as well as find any errors in the registry and correct them correctly. If you have to share your computer with several other users, Comodo System Cleaner will help get rid of even the slightest suspicion of theft of your information, the utility can delete any confidential data without the possibility of their subsequent recovery. Komodo System Cleaner has a simple interface and will quickly remove all unnecessary files, in addition, it will analyze the system for duplicate files.

Wise Registry Cleaner is one of the leading registry cleaning utilities. The program does not have such extensive functionality compared to its main competitors, but it will cope with its direct responsibility perfectly. The application will give you the possibility of both manual and automatic control modes. No need to worry that Weiss Register Cleaner will clean anything important in automatic mode, because the developer has introduced a convenient option for creating a backup copy of the registry. Using Wise Care 365 Free, you can quickly clear cache and cookies within web browsers. The utility is different convenient opportunity settings (and without that simple interface) according to your preference. Vice Care 365 will protect user personal data, defragment the required disks and clean the system of excess garbage.

Computers are so ingrained in our lives that it is simply impossible to imagine a world without them. Despite this, many users do not know how to care for their “iron horse”. For example, not everyone knows how to clean up drive C. This article will help fill the gap in knowledge.

Filling the system disk can lead to a number of inconveniences. If there is little space on drive C, the following problems may occur:

You cannot install new programs;
There is no room for operating system updates;
PC speed decreases.

The first problem is easily solved. If there is not enough space on drive C, then you can install new programs in other partitions (D, E, etc.). But what to do with the second and third points? There is only one way out - you need to clean the system disk. How can this be done? How to free up space on drive C? The answer can be found in this article.

How to free up space on your system disk?

Many people have no idea how to clean up local drive C. People mistakenly believe that it is very difficult. Cleaning your computer is a quick and simple process that does not require any specialized IT knowledge. However, this procedure should not be neglected. The system disk should be cleaned at least once a month.

There are many ways that allow . We will look at the most effective ones in this article. Before we begin, it should be noted that the methods given below can be used to clean up the C drive from junk on Windows 10, Windows 7 and other versions of this OS.

Manually removing unnecessary programs

Of course, software takes up the most space. Therefore, when you need to clean drive C from garbage, first of all you need to pay attention to the software.

How to clean drive C from unnecessary files? To uninstall the program, you must use the built-in Windows utility. To launch it, you need to go to the “Start” menu and select “Control Panel” in the drop-down tab. Then you need to go to the “Uninstall programs” section.

A new window will open containing information about all the programs that are on the computer. They can be sorted by size, date or name. What can I delete? First of all, software that is not used at all must be uninstalled. As a rule, these are completed games. To remove a program, right-click on it, after which the corresponding tab will appear.

Built-in Windows utility

You can free your computer from garbage using a standard Windows utility. This is done very simply. You need to go to “Computer” and right-click on the disk that we will clean. In the drop-down list, click on the “Properties” item, after which a new window opens with information about the memory partition. We are interested in the “General” tab. Go there and click on the “Disk Cleanup” button.

The built-in utility will begin to analyze the data and look for unnecessary files. This will take a certain amount of time. After the program analyzes the computer's memory, it will produce a list of unnecessary files. They need to be ticked and then click “OK”.

You won’t free up a lot of memory this way, but you can win a couple of tens of megabytes.

Temporary files

To carry out the correct installation or update of programs, antiviruses, etc. Temporary files are created on the computer. The operating system stores them in the Temp folder, which is located on drive C. Temporary files are not needed for the daily operation of programs. Therefore, software that uses intermediate resources deletes them automatically upon completion of installation or update.

However, sometimes a glitch occurs due to which temporary files are not deleted. This leads to the Temp folder gradually becoming clogged and taking up more and more space on the system disk. To fix this, you need to remove the intermediate files manually. This is done very simply. You need to go to the Temp folder, which is located at “Computer” > Drive C > Windows folder. To free up memory on drive C, you need to uninstall the contents of this folder.

In Windows 10, Windows 7 and other versions of the OS, there are two folders for storing temporary files. You can get to the second one through the Start menu. You just need to enter the search query %Temp%. The folder needs to be opened and cleaned. It is worth noting that sometimes the operating system may issue a warning that some files cannot be deleted. This indicates that they are currently being used by some program. If such a message appears, then simply click the “Skip” button.

"Basket"

"Basket" is special folder, which is temporary storage for deleted files. Everything stored there takes up computer memory. Therefore, the “Trash” needs to be cleaned from time to time. To do this, you need to right-click on the folder and click on the “Empty Trash” item in the drop-down list. After this, the folder will be freed from garbage, and there will be more memory on drive C.

"Downloads"

Users quite often download movies, music, and games through the standard browser downloader. Files from the Internet are automatically saved to the Downloads folder. And, as you know, it is located on drive C. If a user often downloads some files from the Internet, then the free disk space runs out very quickly. To prevent disk C from becoming clogged, you need to check it from time to time. boot folder for the presence of large files.

You need to open “Computer” and go to “Downloads”.

You need to check the folder for presence large files and if there are any, then they must be deleted or moved to another disk.

Swap file

In Windows OS there is a paging file. How does it affect memory and why is it needed? Sometimes the system does not have enough RAM to perform certain operations. In such cases, the file takes a certain amount from the disk permanent memory and uses it as an operational one.

To free up drive C, you need to make sure that the paging file takes resources elsewhere. You need to go to the “Computer” folder, and then press RMB. In the tab that appears, click on “Properties”. A window will appear. In it, open “Advanced system settings”.

Then click on “Options”.

In the new window, go to the “Advanced” section and click on “Change”.

We install the disk from which the paging file will take memory. This is done as follows. Select drive C and check the box next to the “No paging file” property. To confirm, click on the “Set” button. With another disk, do the opposite and check the “Size by system choice” property.

If the window does not allow you to change properties (the field with disks is dimly highlighted), then uncheck the box next to the “Automatically select paging file size” option.

Hibernation

To save memory on drive C, you can turn off hibernation on your computer. You need to activate the command line (Win + R combination) and write in it: powercfg.exe –h off. Press Enter and voila – hibernation is disabled. After restarting the computer, you may notice that there is a little more memory on the system disk.

However, it is better not to turn it off unless absolutely necessary. This is an extremely useful feature that allows you to restore previously running programs, even if the computer was turned off. To reactivate hibernation, you need to write the command powercfg.exe –h on in the console and restart the PC.

Checkpoints

Checkpoints are created after various changes in the system (updating drivers, installing new software etc.). They allow you to roll back the system if any problems arise. But you have to pay for this opportunity. system memory. To free up drive C, you can delete checkpoints. This will give a couple of megabytes of memory. In this video you can learn how to delete restore points and thus clean up your local drive C:

Conclusion

The memory on drive C gets clogged up pretty quickly. This can cause a whole range of troubles. To avoid problems, you need to monitor the amount of free space and clean the system disk from time to time. Cleaning the C drive has a positive effect on the performance of the computer and does not take much time. There are many free ways free up disk space with memory full. Moreover, these methods are the same on all Microsoft operating systems. That is, disk cleanup on Windows 10, Windows 7, Windows XP, Windows Vista happens identically.