The flash card is write protected. How to remove write protection from a flash drive: Simple and free methods


One of the most reliable means of storing personal information is flash media. For many, such a device becomes the first assistant in their work; with its help, you can easily carry the necessary information just in your pocket. When it comes to the security of storing various programs and files, special software is often used. It is designed to protect the media from copying, deleting or moving materials, as well as from reading, without entering a special code.

But even if you have not used such programs, and when you run the command to transfer its contents, the error appears: “The disk is write-protected,” do not panic, determine the reason and use the suggested methods. Removing protection from a flash drive is not a difficult task at all, and most importantly, it can be solved and is more economical than buying a new one.

Causes

A flash drive can be blocked for many reasons. The most common ones are listed here:
  • Incorrect Windows settings, for example, a software ban installed in the operating system;
  • Failure of the media, often poorly produced “flash drives” - Chinese counterfeits of world leaders;
  • The physical switch is in the wrong position;
  • The host is infected with a virus;
  • Malfunction of computer USB ports;
  • Lack of a driver responsible for correct device recognition;
  • Incorrect use. For example, you cannot remove the media until the process is completed: writing, downloading, renaming, moving or reading;
These are not all the reasons that cause the consequences of the write protection of the media being triggered. But if you still encounter a similar error, this does not mean that you need to change the flash drive.

Proven methods for removing protection from a drive

On the Internet, a lot of recommendations are described for getting rid of such a problem, both hardware and software, and most importantly, the authors of such posts write that his method is “the best.”

We present to your attention the “TOP 7 effective ways” on how to remove write protection from a flash drive, all of them have been tested and confirmed by a large number of users.

Hardware method using Windows command line
First you need to start the line, we do this by simultaneously pressing two keys on the keyboard: Windows + R. The “Run” window will open and enter the command “ cmd"and press the OK button;

The system response is to open the command line;

Required to enter " Diskpart»;

and press Enter. A new window will open - disk management program;

To continue, enter " list disk", confirm the action by pressing the Enter button;

In the window that opens, a list will appear on which you need to determine the number of the required media, focusing on the amount of memory, in our case it is Disk 5 - an 8Gb flash drive. Select a disk using the command: select disk )(, where -)(, this is the disk number, in our case 5;

After it has written to you: “Disk selected )(”, enter the following command, which will remove the block from all protected files that had a “read-only” error when opened. Command: attributes disk clear readonly(can be copied);

When “Disk attributes have been successfully cleared” is displayed, you can exit the program by entering the “Exit” command.

After closing the utility, check the media for functionality. Once you are confident in the operation of the method, you can continue to use the device without extra costs.

Virus scanning
One of the most relevant ways to solve this problem is also to scan the media for virus infection. To do this, you will need to go to “My Computer” and right-click on the name assigned to the device by the operating system, for example, “Disk Z”.

Then select “Check for viruses” in the menu. After a few minutes, the scanning result window will appear on the screen. This method can be applied to any antivirus software installed on your PC.

The flash drive can be write-protected by unauthorized installation of virus software. A clearly demonstrated method will help solve this problem, and will also protect your computer from automatic installation of unnecessary gadgets.

Hardware button on the carrier. Mechanical protection
Some models of portable USB drives have built-in protection that is turned on/off using an installed button. Be sure to pay attention to this; to allow recording and moving, the button must point to the “open lock.”

Formatting
Often, to eliminate such an error, utilities created for formatting are used. Remember, using this method will completely delete all files from the media.

Applying Windows Group Policy
It is possible to restrict rights by local group policy; the elimination of such infringement of rights should be carried out by following the algorithm:
Press Windows + R at the same time and enter the command gpedit.msc, click OK;

In the window that appears, go through the tabs sequentially:

  1. Computer configuration;
  2. Administrative Templates;
  3. System;
  4. Access to removable storage devices.

By clicking twice, an option window will open;

Check “Disable” → “Apply” → and confirm by clicking “Ok”.

By completing such a simple process, you can easily remove the interference in the infringement of the rights to use the media and continue working.

Programs to fix errors

If the above hardware fix methods did not give the desired result, you should try using software.

Soft disks are designed for expensive storage media; for less valuable storage devices there are also a lot of programs, for example:

JetFlash Recovery Tool- a free program in the public domain, intended for media from A-Data and Transcend. Its main functionality includes the ability to eliminate writing and reading errors, as well as unlocking. After downloading the utility from its creator’s resource, run it using the file of the same name, .exe format. After waiting for installation, click the JFRecoveryTool.exe shortcut. When the working window opens, insert the USB flash drive into the USB input and click “Start”. After the process is completed, check the drive to see if the error has been resolved.

Apacer Repair- the utility is created individually for media produced by Apacer Technology Inc, and is also applicable for third-party drives. The functionality can eliminate recording problems. It is recommended to download the program from the official resource, where it is posted and is available for download completely free of charge. After completing the download process and connecting the USB drive, run the utility. First of all, she will do the formatting, for which there will be a warning. By clicking “Format”, the successfully completed process will allow you to forget about the recently disturbing problem.

Knowing the brand name of your carrier, it will not be difficult for you to select the required program; there are tons of them on the Internet. It is to solve such problems that manufacturers create them and post them on Internet resources; it is worth noting that they are all freely available.

It is not always possible to determine the true cause of a malfunction and remove write protection. But having used the above methods, based on the result you will understand exactly what to do next: safely use a working device, or buying a new one will become an inevitable event.

We do not guarantee the safety of information!

When working with flash drives, certain difficulties sometimes arise. For example, often the system, when attempting to copy any information to a medium or format it, suddenly displays a message that the disk is write-protected. As a result, you can neither transfer files to a removable drive, nor delete or change them. What to do in such a situation? And most importantly, how to format a write-protected flash drive and return it to its usual working state?

First, we recommend that you take a close look at the media itself. Some USB flash drives and memory cards have a special switch. It has two positions: one activates the write lock, and the other removes it.

This means that all you have to do is move the lever to remove the protection. At the same time, it will be possible to write any information onto the flash drive again. True, you first need to format the drive using standard Windows tools.

If there is no switch on the flash drive, then just check it with antivirus software. The removable drive may be infected with malware, which forces it to be write-protected and prevents it from being formatted.

For reference! If you use a card reader, it's worth checking that too. Sometimes, due to a malfunction of this device, the system writes that “the disk is write protected.”

Removing protection from a disk using the Diskpart utility

Operating systems (OS) starting with Windows XP have a console utility. It's called diskpart. So, using this tool you can manage various disks. Including gaining access to the “problem” media. Working with the utility is easy:


After all the manipulations, the write-protected flash drive should change the file system. In addition, it will again be possible to upload any information to it.

However, please note that there are different write protection systems. Not everything can be removed using the diskpart utility. Therefore, if the procedure does not give the desired result, then try another method. We'll talk about it further.

Removing write protection of a flash drive through the Group Policy Editor

Another method that allows you to format a flash drive even if it is write-protected. It is based on using the capabilities of the Local Group Policy Editor:


How to remove protection from a memory card using the diskmgmt.msc utility?

There is another standard Windows component for disk management. It is called the diskmgmt.msc utility. To use this OS tool to remove write protection, you must:

  1. Press the combination Win+R. Enter “diskmgmt.msc” and click the “Enter” button.
  2. Next, you need to wait a little while the system displays the disk configuration.
  3. Then we find the flash drive and right-click on it.
  4. Select the “Delete Volume” operation. The partition will be defined as “not allocated”.
  5. Next, right-click on it. Click on “Create Volume”.
  6. The system will launch the New Volume Wizard application. Click “Next” several times, leaving all the default settings.
  7. At the end, click “Done”. We are waiting for the flash drive formatting process to complete.

Is it possible to format a write-protected flash drive using third-party programs?

Sometimes standard Windows tools do not help solve a problem related to the operation of removable media. Therefore, you should not neglect special utilities. They are specifically designed for restoring and formatting USB flash drives, SD cards, etc. So you can use:

  1. Special proprietary software produced directly by the manufacturer itself. For example, for Transcend products this is the JetFlash Recovery program.
  2. If for some reason it is impossible to use proprietary utilities, then download and try other formatting programs. There are a lot of them. Some of the most popular and convenient are Hp disk format tool, HDD low level format, Recuva, SDFormatter, etc.

What else can help remove write protection on files?

  • By changing Windows registry settings, in some cases it is possible to remove protection. To do this, open the “Run” line. Enter "regedit". In the menu that launches on the left, go to the StorageDevicePolicies folder. You can find it at the following path HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control. Here we are interested in the “WriteProtect” parameter in the right panel. Double click on it. Then we change the number 1 in the “Value” field to 0. All that remains is to connect the flash drive and format it.
  • Sometimes you can remove write and format protection by updating the drive firmware. This can be done in different ways. We recommend using CheckUDisk, UsbIDCheck, USBDeview or ChipGenius. Through them you will find out the VID and PID codes, which are necessary to determine the chip model of your flash drive. After which you can easily find and download the latest firmware for the media from the network. If you suddenly encounter difficulties at this stage, then use the FlashBoot.ru website.
  • If it is impossible to copy information or save any files to the card, then try removing the protection in this way. Go to "My Computer". Find the flash drive you need there. Click on it with the secondary mouse button. Select the "Properties" line. Then go to the "Access" tab. Next, click on “Advanced settings”. Check the box next to "Share".
  • It also happens that the problem associated with the inability to write or format removable media is caused by incorrect installation or incorrect configuration of programs for creating virtual drives. For example, Alcohol 120%, DAEMON Tools, Virtual CD, etc. Therefore, you should try to remove this software. Perhaps it somehow blocks work with the memory card.

If you have tried all the methods described above, but the flash drive still does not format, then most likely it has failed. This happens quite often. Taking the drive to a service center is not the most rational solution. Repairing a flash drive usually costs more than buying it. Therefore, it is best to purchase new removable media.

Hello everyone friends. Today, I want to tell you about how to remove write protection from a flash drive in the shortest possible time and without much difficulty. The thing is that the other day, as usual, I wanted to copy a certain file to a flash drive, but in response I saw a message of a similar nature: “The disk is write-protected. Remove protection or use another disk." What kind of things are these? After all, such cases had never happened before and everything worked perfectly. As a result, I began to look for ways to solve this problem, which I will discuss in this article.

First, let's look at the main reasons why write protection may appear:

— The integrity of the file system was violated, for example, due to improper use of the flash drive (for example, after finishing work with the flash drive, the function of safely removing the device is not used)

— The flash drive was attacked and infected with viruses. The most common reason.

— Trivial damage to the flash drive itself. She fell somewhere or was subject to a strong blow.

— A special switch is installed on the flash drive, which prevents infection by viruses and puts write protection on the flash drive.

We have figured out the reasons, now I will tell you how to remove write protection from a flash drive using software and mechanical means.

  • We bypass the protection using a mechanical method
  • Diskpart utility
  • Local Group Policy Editor - gpedit.msc
  • Programs for removing protection from flash drives

    • Mechanical method of removing protection from a flash drive

    As for the mechanics, everything is very simple here. Carefully inspect your flash drive for the presence of a so-called switch, which mechanically installs protection on the flash drive. Below, I have given several examples of flash drives with such a switch. If yours has such a switch, just move it to the other side and everything will work.

    If the situation with the switch does not solve anything, we move on to software methods for removing protection from a flash drive.

    Removing protection using the OS registry

    1) In order to remove protection from a flash drive using the operating system registry, we need to click the Start button and enter regedit (command for editing the registry) in the search field. After that, right-click (right-click) on the icon that appears and select the item – Run as administrator.

    2) Now we need to find a special section called – StorageDevicePolicies, which is responsible for prohibiting writing to the flash drive.

    It should be located in the following path:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies

    Important! If you do not find this partition at the specified path, you must create it manually. To do this, go to the parent section Control, right-click on it and select – Create – Section. Give it a name – StorageDevicePolicies.

    3) Go to the StorageDevicePolicies section we created and right-click in the right area of ​​the registry. Select the menu item - New - DWORD value (32 bits). We call it an arbitrary name, for example, WriteProtect.

    4) Now we just have to make sure that the value of the WriteProtect parameter is 0. To do this, double-click on this parameter with the mouse or right-click on WriteProtect and select the menu item - Change.

    Important! If the value in this parameter is set to 1, then change it to 0 and click OK.

    5) Close the registry editor window, remove our flash drive from the device, and reboot it. After the reboot, insert the flash drive and check whether files can be written to it.

    Removing protection from a flash drive via Diskpart

    If the option to remove protection using the registry did not work, let's try this operation through the command line interface.

    For this:

    1) Press the Start button, enter the command diskpart, then right-click on the icon that appears and select the item – Run as administrator.

    2) In the window that appears, enter the command – list disk and press the Enter key. A list of drives will appear in front of us, in which we need to determine the serial number of your flash drive.

    This is easy to do using the size of your flash drive. For example, my flash drive is 8 GB in size, so I can easily identify it in the list of media. If you don’t know the size of your flash drive, then double-click on the My Computer icon (usually located on the desktop) and see what size your flash drive is (RMB - Properties).

    After you have selected the desired media, enter the command select disk your media number(I have this 1). Press Enter and a message with the selected disk should appear.

    3) Enter the command - attributes disk clear readonly, which clears the read-only attributes for the flash drive and removes write protection from it.

    Press Enter and if everything is done correctly, the message “Disk attributes successfully cleared” will appear in front of you.

    Close the diskpart utility window.

    Removing protection using the Local Group Policy Editor

    Sometimes there are cases where the write ban is enabled through the Group Policy Editor in the OS itself. Let's check it out:

    1) Click the Start button and enter the command gpedit.msc in the search bar, then press the Enter button.

    2) In the window that appears, follow the path: Computer Configuration - Administrative Templates - System - Access to removable storage devices and in the right area of ​​the window select the item - Removable drives: Deny writing.

    At this point, we pay attention to the condition that appears next to the inscription. If the status is set to Enabled, then double-click on it and select Disable in the new window. Click Apply and OK.

    List of programs for removing protection from a flash drive

    HP USB Disk Storage Format Tool– a universal program that fits almost any flash drive and allows you to quickly remove protection. program, run the exe file (this program does not require installation) which is located in the archive and the program itself will detect your flash drive. After that, you need to select the type of file system into which the program will format and click the Start button.

    JetFlash Recovery Tool - this program is only suitable for flash drives from the following manufacturers: JetFlash, A-DATA and Transcend. program, carry out a simple installation, and after launching it, press the Start button.

    Apacer Repair – this program only works with Apacer flash drives. If you have just such a flash drive, then in order to remove the program from the flash drive, simply launch it and follow the instructions on the screen.

    AlcorMP is one of the best programs for carrying out such actions. It works with AlcorMP controllers. archive, unpack it and run the file AlcorMP.exe from the folder itself. If your flash drive works on an AlcorMP controller, then the inscription in line G will be black and this means that everything is in order and you can work. If the inscription is red, then working with this flash drive is impossible. In order to remove write protection from a flash drive, simply press the Start button (A) after setting the switch to Russian.

    An important nuance. All programs for working with flash drives must be run with administrator rights. To do this, right-click on the program launch shortcut or on the program itself and from the context menu select – Run as administrator.

    A couple of points. Before using the above programs, I recommend carrying out preliminary steps and if they do not help, only then resort to the help of software. What is this connected with? If you use software, all your files will be deleted as the flash drive is formatted. To prevent this from happening, use the methods below, and if they do not help, then you can already start working with the programs.

    1) If your flash drive is infected with viruses (suspicious files on it), then scan it and remove all viruses found.

    2) There are times when it is enough to change the USB port and the data from the flash drive can be read perfectly.

    3) Be sure to check for a security switch on the flash drive. If it is in “Lock” mode, then move it to the other side.

    That's all the advice that I wanted to give you on the topic of how to remove write protection from a flash drive. I hope this article will help you in solving this problem.

    That's all for me. See you again!!!

    The situation has been familiar since the days of floppy disks. Write protection can be installed on SD or microSD memory cards, or on a USB drive. Sometimes this indicates a device malfunction. In most cases, the problem is solvable. How to quickly and easily remove protection from a flash drive, read our article.

    Why does a flash drive need write protection?

    Sometimes this is a necessary measure. Users put protection on their flash drives to protect them from malware that is spontaneously copied to the drives.

    In other cases, it is a hardware or software error.

    Disc is write protected

    Causes of the “Disk is write-protected” error and solutions

    Mechanical write protection mode is enabled

    Some USB flash drives have built-in mechanical protection. It is a switch on the body. If there is one, and it is in the “Lock” position, then it needs to be moved.

    If the switch is in the “Lock” position, then data cannot be written to the flash drive

    It is also possible that the mechanism is broken and the switch cannot be moved.

    The host is infected with a virus

    Malicious software not only blocks data recording, but also any other operations related to the movement of information. In this case there are two solutions:

    1. Scan the drive with an antivirus (antivirus databases must be up to date).
    2. Format the flash drive using system tools or using third-party programs. It is possible that the virus will block the formatting. In this case, you need to scan the entire computer.

    Blocking by system processes

    1. Go to the tray, right-click on the “Safely remove devices and disks” icon and select your flash drive.

    In the tray, find the “Safely remove devices and disks” icon, right-click on it and select the desired device

    2. Restart your computer. It is possible that some system processes interfered with the operation of the drive and interfered with its operation. And the steps described above can disable them.

    USB storage file system errors

    Memory chip wear, viruses, power surges and unsafe removal of the flash drive can lead to logical damage to the USB drive.

    1. If you need the data on the flash drive, you need to extract it first. If you can’t just copy, you’ll have to use a data recovery program.
    2. Format the drive to restore the file system.

    However, it is unlikely that it will be possible to format it in the usual way. Therefore, you need to use the Run tool.


    This can also be done using the utility. For example, HP USB Disk Storage Format Tool. It is free and requires running as administrator.

    Free utility for formatting USB drives HP USB Disk Storage Format Tool

    USB storage controller firmware failure

    The reasons described in the previous paragraph may lead to controller failure. To protect the information on the flash drive, it goes into blocking mode and stops responding to system requests. To fix this, the controller needs to be reflashed. To do this, you need to know the controller model in order to select the appropriate program. A good tool is the Flash Drive Information Extractor utility. It is free and displays all available information about the flash drive, including the controller model.

    The free utility provides all the information about the USB drive, including the controller model

    Windows Registry

    There may be a setting in the registry that prohibits changes.

      Using the “Win” + R buttons, launch the “Run” tool and enter the regedit command.

      Enter the regedit command

    1. Go to the address to the section HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies.
    2. If the partition does not exist, you need to create it. To do this, right-click on the “Control” section, select “New” and click on “Section”. Name it “StorageDevicePolicies” (without quotes).

      If the editor does not have the StorageDevicePolicies section, then you need to create it: to do this, right-click on the “Control” section, select “Create” and click on “Section”

    3. In the right part of the window, right-click and create “DWORD Value (32 bits)”. Name it “WriteProtect” (without quotes).

      Right-click on the right half of the window, select “New” and click on “DWORD Value (32-bit)”

    4. Check the parameter value. Right-click on it and select “Edit...”. The value should be "0".

      A new setting called "WriteProtect" should be set to "0"

    5. Close Registry Editor, remove the USB drive, and restart your computer.

    Read-Only attribute

    It has nothing to do with the file system of the flash drive, but simply tells the system that changing the disk data is prohibited.

      Using the "Win" + R buttons, launch the "Run" tool and enter the cmd command.

      Enter cmd command

    1. In the window that opens, first enter the command “diskpart”, then “list disk”. The last command displays a list of available drives. Find the removable disk (in this example it is Disk 1).

      After entering the list disk command, a list of available disks appears, among them you need to find a removable disk

      2. Enter the command “select disk 1”. A confirmation message appears that the drive has been selected. Then enter the second command “attributes disk clear readonly”.

      After entering the select disk 1 command, confirmation appears that the disk has been selected: all that remains is to enter the attributes disk clear readonly command

    Local Group Policy Editor

    There may be a setting in the editor that is causing the write protection error to appear.

    1. Using the key combination “Win” + R, launch the “Run” tool and enter gpedit.msc into the line.

      To allow data to be written to the disk, you need to select “Disable” and click “OK”

    Malfunctioning USB ports

    To exclude or confirm this possibility, you need to connect another USB device to the port. If it works fine, then the problem is with the media.

    Physical damage to the media

    A shock, improper storage or wear of the flash drive can cause a write protection error to appear. In this case, you need to contact the service center. If the memory chip is intact, then the information can be restored.

    USB stick Transcend

    A special feature is that there is a JetFlash Recovery utility for servicing flash drives from this company. It eliminates errors, including the one due to which information cannot be written to the disk.

    Video instructions: how to remove protection from a flash drive

    Using these instructions, the user will be able to determine the cause of the error when trying to write data to it and remove protection from the device.

    It is very frustrating when habitual manipulations performed many times suddenly, at one unfortunate moment, fail. It would seem that writing files to a flash drive is a routine operation that is already performed “automatically”. And so, when I try to transfer several files to this portable media once again, a message pops up that this flash drive is write-protected and it is not possible to perform the operation.

    Is this a death sentence, or can the problem be dealt with? Let's figure it out.

    Reasons for blocking a flash drive

    There can be many versions of why it is impossible to write to the media - from mechanical damage to the flash drive to a stupid joke from someone you know. What led to the blocking in this case is not important. It is much more important to use the portable media correctly. Common recommendations include:

    • Avoid mechanical influences.
    • Protect from dust and water.
    • When finished, use the safe removal mode.
    • Check for viruses.
    • It is not recommended to use a flash drive in devices with different OSes, or at least not to write or format them in such devices.

    It is much more interesting and useful to find out a way to get rid of the error and write to a flash drive.

    How to remove write protection

    Let's start everything simple. Having made sure that the flash drive is intact externally, nothing is broken and it has not been dipped into liquid, we will step by step find out why it turned out that this disk is write-protected.

    Hardware lock

    Inspect the storage media carefully. SD memory cards (microsd through an adapter) and some flash drive models have a mechanical switch that blocks the ability to write and format. Check what position it is set to; if it is in “Lock” mode, then all you have to do is move it and remove the write protection.

    It is useful to connect the flash drive to a different USB port, or try recording on another computer. This will eliminate the possibility that there are problems with USB on this computer.

    If the flash drive does not open on any computer, then most likely the drive is damaged and will have to be replaced.

    Checking the file system type

    Please note what kind of file you are trying to write to. As a rule, new flash drives are initially formatted in the FAT32 file system. If the file being written is 4 GB or more in size, you will first have to change the file system to NTFS. Only then will it be possible to record files of any size.

    Virus check

    Before you continue trying to unlock your flash drive, it is extremely useful to check it for viruses. The reason may be hidden in some malicious program blocking the ability to write information to the disk.

    Use an installed antivirus program, or download a verification utility from the website of the developer of such software.

    Using the Registry

    You can enable disk writing by entering (or checking) the value of the parameter in the registry. To call it, you need to click the “Start” button, enter “regedit” in the search bar, then right-click on the found utility and select the menu item that runs it as administrator.

    "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USBSTOR"

    and find the “Start” parameter.

    The value “3” of this parameter means that the entry is allowed, but if a different value is set, then most likely the cause of the error has been found.

    Unblocking an entry in the Local Group Policy Editor

    It is possible that the ability of some users to write to removable media is blocked on the computer. To remove the ban, you need to make changes to local group policy. You should click the “Start” button, enter “gpedit.msc” in the search bar, right-click and run the snap-in as administrator.

    “Computer Configuration->Administrative Templates->System->Access to Removable Storage Devices.”

    The value of the “Removable drives: Deny writing” parameter should be “Not configured” or “Disabled”. Otherwise, recording to external media is prohibited.

    You need to reboot the system and then try again to write to the flash drive.

    Removing recording protection using Diskpart

    If there is still no result, then you can use the command line and the Diskpart program included in the OS. You need to click the “Start” button, enter “Diskpart” in the search bar, and on the line that appears with the name of the program, right-click to run it as administrator. In the window that appears, enter the following commands.

    1. “list disk” – a list of all disks connected to the system will be displayed. You need to choose the right one. You can determine which one corresponds to the flash drive if you go by the size of the disk.
    2. “select disk X” – select the desired disk, where “X” is the disk number from the list displayed by the previous command.
    3. “detail disk” – displays detailed information on the selected disk. You should make sure that the correct drive is selected.
    4. “attributes disk clear readonly” – resetting the “read only” attribute.
    5. “clean” – deletes all partitions on the disk.
    6. “create partition primary” – creating a partition.
    7. “format fs=fat32” – formats the partition with the creation of the FAT32 file system (if you use the fs=ntfs command, the formatting will be performed with the creation of the NTFS file system);
    8. exit – exit the program.

    If no recording was made because the “read-only” attribute was set, then steps 5-7 can be skipped. Otherwise, it is advisable to format the flash drive, first saving all important data.

    Using third party utilities

    It is possible that the flash drive is not formatted, giving one or another error. In this case, to solve problems, it is advisable to use proprietary utilities produced by many flash drive manufacturers. Some of them can be listed:

    • JetFlash Recovery Tool – for Transcend drives.
    • Apacer Repair – for Apacer drives.
    • Apacer 8 Repair Utility is a set of utilities for drives not only from Apacer, but also from a number of others.
    • UFD Recover Tool – for Silicon Power flash drives.
    • USB Flash Drive Online Recovery – for AData drives.
    • Kingston Format Utility - respectively, for Kingston flash drives.
    • AlcorMP is a utility that can work with Transcend JetFlash drives and others that use the AlcorMP controller.
    • Phison Format & Restore – formats (low-level and high-level) flash drives with a Phison controller.
    • HP USB Disk Storage Format Tool is a universal utility for formatting flash drives.

    All utilities must be run as administrator.

    You can clarify the type of controller used in the flash drive by using, for example, the “Flash Drive Information Extractor” utility.

    Conclusion

    If none of the recommendations help solve the problem, then the drive will probably need to be replaced. You can use specialized utilities designed to work with a specific type of controller. There is a possibility that the flash drive can be revived. The question is how much you can trust this drive after a serious failure.
    

    2024 gtavrl.ru.