FISHER - Metal detectors. Minelab Explorer SE metal detector repair

Our service center offers metal detector repair services. We repair all types of search equipment, from pinpointers to deep metal detectors and ground penetrating radars. We have our own warehouse of spare parts for metal detectors (Garrett, Minelab, AKA, XP), which allows us to carry out repairs in the shortest possible time. On average, typical metal detector repairs take from 2 to 5 business days.

Our working conditions and prices

• Fault detection (diagnosis) within 24 hours, excluding holidays and working days.
• The average cost of diagnostics is 350 rubles.
• Minor repairs (resoldering plug or replacing cable) 600 rubles.
• Medium repair (replacement of simple electrical circuit elements - capacitors, transistors, etc.) ~ 1000 rubles
• Overhaul - implies a complete replacement of boards or main parts, in this case, the cost is calculated depending on the device model

Why is it worth ordering metal detector repair from us?

Just a few of our advantages, but this is enough to order repairs from us:

1. We really quickly and efficiently repair devices (from 2 working days)
2. The average cost of repairing a device is ~ 1,700 rubles, you must agree - this is not expensive at current prices for new devices
3. We are located next to the metro (only 100 meters) so it won’t be difficult to bring and pick up the device from us.

Repair is a scary word that few people want to meet and that everyone is afraid of. But the reality is that nothing lasts forever and sooner or later equipment breaks down, including metal detectors. Our “equipment” is intended for active use and is therefore subject to constant stress, both physical and technical. There are many reasons for failure. This can be anything from a physical blow to water hitting the block (if it is not protected). There are many reasons for breakdowns, but there is only one solution - it needs to be repaired.

The FORTUNA online store is expanding the range of its services for the repair of metal detectors, coils and accessories. Until recently, the service center that serviced Koschey metal detectors expanded its capabilities. Now you can repair most metal detectors and coils from global and domestic manufacturers.

ATTENTION!

If your metal detector or coil is subject to warranty repair and the warranty period is still valid, you must contact the manufacturer or store where you purchased the product.

Only official metal detectors that have holographic tags can be repaired!

Metal detector repair

We repair most metal detectors from global manufacturers. Here you can repair the following devices:

• Garrett;
• Minelab;
• XP md;
• Koschey;
• Teknetics;
• Fisher;
• Makro MD;
• Nokta DT.

This is a list of the main manufacturers. If you do not find your device on the list, you need to check the possibility of repair. Repair of homemade metal detectors is discussed personally.

“Reversal” (confusing “+” and “-”) of the power supply, water getting into the device, as well as various physical breakdowns are solvable problems.

These are the most “popular” breakdowns that occur most often. If the device simply does not turn on for no known reason, you need to submit the metal detector for diagnostics. Diagnostics are carried out within 2-3 days, taking into account the repair queue.

The Leader-SC service center offers high-quality and fast repair of Minelab metal detectors in Moscow. We fix any breakdowns of metal detectors of these models: CTX 3030, CTX 3030 RUS, E-Trac PRO RUS, E-Trac Professional, E-Trac RUS, Eureka Gold, Excalibur 2, Explorer E-Trac, Explorer E-Trac Rus, Explorer SE Professional, Go-Find 20, Go-Find 40, Go-Find 60, GPX 4500, GPX 4800, GPX 5000, GPX-4800, GPX-5000, GPZ 7000, Pro-Find 25, Safari, Safari PRO Pack, SDC 2300 , Sovereign GT, X-Terra 305, X-Terra 505, X-Terra 705, X-Terra 705 DD 10.5", X-Terra 705 Dual Pack, X-Terra 705 Gold Pack, CTX 3030 and all the others.

Prices

*Labor prices shown, part cost not included

Our service center provides a guarantee for all work performed and installed parts.

Conditions for repairs in our service center

Using the services of our service center is very simple:

• Call by phone in Moscow (495) 771-52-79 and describe your problem. Our specialists will help determine the most likely cause of the breakdown and the approximate cost of repairs, or
• You can come come to us and bring the device to free diagnostics. If the defect is not clear, then we accept the device and print you a receipt. After diagnosis, we will inform you of the exact cause and cost of repair.
• Ask a question using the website. We will answer you by phone, if indicated in your request, or by email.
• If the cost is reasonable- we are repairing. You pick up the finished device, check it, pay for repairs, and receive a guarantee.
• If the cost is high- you pick up the device “without repair” without paying anything.
• "Courier" service- the courier will deliver your device to the service center and bring it back repaired. Check with your consultant for the opportunity to use this service by calling in Moscow (495) 771-52-79 .

What is needed to repair a metal detector? It all depends on the nature of the malfunction. Some breakdowns can be easily fixed on your own, while others require contacting a service center. Repair of metal detectors in Moscow is carried out in many service centers specializing in the repair of such equipment. Here, the faulty device will be examined by specialists familiar with the principles of operation of metal detectors. They know what most often breaks down in such equipment, which allows them to significantly speed up repair work - they are helped by their knowledge of metal detector circuitry.

Finding a workshop that repairs metal detectors in Moscow is not as difficult as it seems at first glance. Of course, you can’t hand over such equipment to a service center where TVs or computers are repaired - the circuitry here is a little different. But is it worth sending the metal detector in for repair if you can handle some of the breakdowns yourself?

Most often, problems arise with those elements that are in motion and in operation. Agree that the body of a car rarely breaks, while the chassis breaks much more often. The most common failure of metal detectors is the lack of normal contact in the connector with which the search coil is connected to the device. As a result, you can’t count on normal searches, since the coil is constantly turned off. What to do?

Take the metal detector to the nearest service center - you will have to pay money for this. The amount of payment depends on the appetite of a particular service;
- Dealing with the problem yourself is absolutely free. And with the money you save you can buy some useful accessory.

In order to restore contact, you need to press the contacts of the search coil connector with a regular needle. This must be done carefully so as not to break anything. To improve contact, wipe the contacts with alcohol or cologne. That’s all the repairs, for which you would have to “unfasten” a certain amount of money at the nearest service center. The same applies to any other connections - the integrity of the contacts can always be restored independently. But if complex malfunctions occur, you should consider repairing the metal detector in one of the service centers in Moscow.

Metal detector coil repair

Intensive use of metal detectors often leads to the formation of cracks in plastic elements. Here, the housings of electronic units crack, plastic armrests break, and cracks appear on search coils. It would seem that cracks cannot in any way affect the performance of the equipment - they only spoil its appearance. But in reality this is far from true, because water can get inside the metal detectors through cracks. If it gets into the electronic unit, then damage cannot be avoided - the water will damage the system board, causing corrosion and damage to individual elements of the electronic circuit.

Search coils are most often filled with resin, so cracks here are not always terrible. But water that gets into the coil connector can cause a lack of contact - water leads to corrosion of the metal, causing a breakdown in contact. It is easy to remove moisture from the coil connector; you just need to let it dry thoroughly or dry it with a hairdryer. After this, you need to thoroughly clean the contacts to remove traces of corrosion - this is done using alcohol and available tools. Cracks formed in the plastic are sealed with any suitable glue. Any moisture-resistant glue, including epoxy resin, is suitable here. By sealing the cracks, you will restore the seal to the connector, after which you can safely go on a search, including underwater.

A similar repair at a service center can cost a pretty penny. Therefore, it is best to deal with such minor malfunctions yourself, without spending money on the services of repair shops and authorized service centers - this is where you should deal with serious malfunctions, the elimination of which requires certain knowledge and tools.

The company offers post-warranty repairs of all metal detectors. Troubleshooting is done quickly, efficiently and reliably.

Unstable operation, constant failures, breakdowns and dents - all these are typical and standard malfunctions of metal detectors, which necessarily require timely, high-quality repairs. We produce repair of metal detectors in Moscow at quite attractive prices.

Prices for additional services

What breaks most often?

There are several standard metal detector breakdowns that occur most often.

1. Cable fault. It occurs due to careless handling of the equipment, and also due to various mechanical effects on the cable itself, which is the connector between the coil and the electronic unit.
2. Coil malfunction. One of the most popular faults. The “symptoms” are as follows: lack of reaction to an object, decreased search depth, a wide variety of “glitches.”
3. Electronic unit malfunction. The cause is most often a classic software glitch. Sometimes this malfunction occurs due to moisture getting into the equipment.
4. Malfunction of connectors. Often combined with cable related faults.

Our experienced employees are familiar with all these types of breakdowns, and they repair metal detectors of all types very quickly and efficiently. But before you send your metal detector for repair, it is advisable to clean it of various contaminants.

What is offered to clients?

The range of services of our specialists includes such things as diagnostics, replacement of the display and parts using soldering equipment, changing software, restoring various switches and control buttons, and much more. More detailed information related to the services provided for the repair of metal detectors can be found on our website or by calling the Deteknix phone number.