Does iPhone 7 have modem mode? Connection via cable


Can be used as a modem Iphone, it corresponds to certain system requirements and uses the operator's cellular connection.

How to use iPhone as a modem

The first step is to make sure that cellular data is turned on and that you have Internet access.

Then open the settings and look there.

It happens that this function is not specified as a separate item in the settings in some versions of iOS. Then it is necessary go to “cellular communications” and find modem mode there.

If the required item is not there, then you need to register settings for the modem on one's own.
Select “cellular data network” and find the modem mode there. The same data (APN, username and password) is entered here as in the Internet settings. We reboot the phone and the modem mode appears in the settings as a separate item.

There are three ways to use your iPhone as a modem

Connect via Wi-Fi

The easiest way. You must enable modem mode and set a password, which will be entered by the person who is about to connect to your device. We find the network by the name of the device and enter the password.


If you did everything correctly, your phone will start distributing Wi-Fi, man knows the password will be able to access it and on your phone at the top of the screen you will see the number of connected devices.

Connection via USB cable

In order to access the Internet from a PC using a USB cable, you need to connect your iPhone to the computer, it is best to do this using the original cable, other cables may make an incorrect connection or not make it at all, then the message will appear on the phone screen , What this accessory not supported.
When you insert the cable into the computer, the question “Trust this computer?” will appear on the phone screen; answer positively so that the connection is established. Required on Windows 10, 8 and Windows 7 must be installed Apple iTunes (can be downloaded for free from the official website), otherwise the connection will not appear.

Then in network connections find your IPhone and connect, the password is set in the phone.

Connection via Bluetooth

If you want to use your phone as a Bluetooth modem, you first need to add the device (pair) in Windows. Bluetooth, of course, must be turned on both on the iPhone and on the computer or laptop.
Click on Bluetooth icon in the notification area right click and selecting “Add a Bluetooth device”.

Then create a pair. It will appear on the screen of your phone and computer secret code, if it matches you need to confirm, then the devices will connect via Bluetooth.


After the pair has been successfully created, you need to connect to the Internet via Iphone access. To do this, go to the “devices and printers” menu on the computer, find the iPhone we need there, right-click and connect.

The message “Modem mode” will appear on the phone, which indicates correct connection. These operations may require current version iTunes, if your version is outdated, you need to reinstall it. While the Internet is being distributed, the phone remains connected and has the ability to receive SMS messages and incoming calls. During a conversation, the Internet connection is interrupted and automatically restored after it ends.

But you need to remember two things: when working in modem mode, the device discharges much faster, so after finishing work you need to turn off the “Modem Mode” function, and you give away your mobile traffic, don't overdo it if you don't have unlimited Internet, Certainly. Tariffing is carried out based on the amount of information downloaded and transmitted, which will quickly bring your balance to zero.

Enjoy your use.

Have you ever had a situation when you are staying at a hotel or just relaxing in nature - and you have a laptop or tablet, but they do not have access to the Internet? This can be fixed since the iPhone can be used as a modem by enabling the dot on it Wi-Fi access.

Follow the instructions below to set up and enable a hotspot on your iPhone and use it as a modem.

You should know what your iPhone should have tariff plan with the Internet, the operator must also support mobile point access.

Using modem mode on iPhone 7, iPhone 6, iPhone 5 and other models, you can connect computers, laptops, tablets, smartphones and other devices to the Internet via mobile network 3g or 4g (lte). Modem mode is available for all Apple smartphones from iPhone 3GS to iPhone XS Plus.

How to enable tethering mode on iPhone:

Step 1:

First you need to turn on the Internet on your iPhone, if you already have it turned on, then feel free to proceed to step No. 2.

If the Internet is not turned on! Go to Settings → cellular→ Cellular data and activate the switch Cellular data, and also activate the switch Enable LTE or Enable 3G.

Step 2:

Enabling modem mode on iPhone is located at the following path: Settings → cellular → Modem mode and activate the switch Modem mode. iPhone may offer you to choose how to distribute the Internet from using Bluetooth, USB or Wi-Fi. That is, the Internet can be distributed not only via Wi-Fi, but also via USB and Bluetooth.

Step 3.

Select device connection via Wi-Fi if you want to connect your device to the Internet via Wi-Fi. In this case, I recommend changing the password, since the standard one is too complex and it is not convenient to dictate it to a friend. Don't be afraid, no one will hack you.

Attention! You will not be able to use Wi-Fi to connect while your iPhone is distributing the Internet via Wi-Fi in tethering mode. You can only distribute the Internet that comes to you exclusively via a 3G, GPRS or LTE cellular network, and not via Wi-Fi.

What to do if modem mode on iPhone does not turn on

There are cases when the modem mode on the iPhone simply does not turn on, and to turn it on, the user will have to enter the settings manually. The cellular operator is to blame for this.

I will show you how to enable modem mode using the example of the mobile operator Megafon. But, if you have another operator (MTS, Beeline, Yota, etc.), then you must enter the data of your operator, you will find the data below. Well, let's get started:

Step 1:

Go to Settings on your iPhone and select Cellular.

Step 2:

Select " Cellular network data transfer" and fill in the data. You can take them on this page, but below.

Step 3:

After filling in all the data, the Modem mode item should become active.

Operator Internet settings

As promised, below I publish Internet settings for all popular cellular operators. If you have an operator that is not on this list and you cannot find them, be sure to write in the comments, and I will try to help you.

Beeline / Beeline

APN: internet.beeline.ru
Username: beelin
Password: beeline

MTS / MTS Russia

  • APN: internet.mts.ru
  • Username: mts
  • Password: mts

MegaFon / MegaFon

  • APN: internet
  • Username: gdata
  • Password: gdata

Tele2 / Tele2 Russia

  • APN: internet.tele2.ru
  • Username: leave it blank
  • Password: leave it blank

Yota

  • APN: yota
  • Username: yota
  • Password: yota

Update: I've updated this post. new instructions. This will work on the latest iOS versions from iPhone XS, XS Max, XR, iPhone 8, iPhone 8 Plus, iPhone X. Old phones updated to iOS 12 such as iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus and up to iPhone 7 and iPhone 7 Plus, iPad Pro Cellular and iPad Air will also work.

Conclusion

As you can see, turning on tethering mode and setting up a Wi-Fi hotspot on your iPhone is not at all difficult. Even if it does not turn on, you can simply configure it manually. If you have any problems turning on the modem or setting up an access point on your iPhone, be sure to write about it in the comments below.

Dmitry Marishin

Once upon a time, we very often used the service to access the Internet mobile operators in the form of a mobile router. Thanks to this router, it was possible to connect to the web network almost anywhere where there was operator coverage. They were replaced by smartphones when they added the function of an Internet access point, that is, modem mode.

Despite the fact that the ability to use an iPhone in modem mode has existed for a long time, not everyone knows how to set it up and enable it.

Setting up and enabling modem mode on iPhone

You can use your iPhone as a modem to connect your laptop, tablet, or other smartphones to the Internet.

1. Check if the Modem Mode function is available

Open "Settings" and find the line called "Tethering Mode". If it is, then just turn it on. If the access point does not appear, it may not be activated and you may need to contact your operator and ask them to connect this service. It is usually enabled by default.

2. Set up the connection

Go to: Settings > Cellular > Data Options > EnableLTE".

Here it is necessary that the connection data be filled in. Especially in the “Modem Mode” section. Usually they are registered automatically if the service is supported and connected by the mobile operator.

Cellular operator data settings

MTS - automatic Internet settings on iPhone.

MTS - manual Internet settings on iPhone.

  • APN: internet.mts.ru
  • Username: mts
  • Password: mts

Megafon - Internet settings on iPhone.

When you install a Megafon SIM card, mobile Internet settings are installed automatically.

If necessary, you can check them:

  • APN: internet
  • Username: gdata or leave blank
  • Password: gdata or leave blank

Beeline - automatic Internet settings on iPhone.

  • Activate the Internet Access service by dialing *110*181#
  • Next, receive automatic installation by calling 0880. The password for saving settings is 1234.

Beeline - manual Internet settings on iPhone.

  • APN: internet.beeline.ru
  • Username: beeline
  • Password: beeline

Tele2 - automatic Internet settings on iPhone.

Tele2 - manual Internet settings on iPhone.

  • APN: internet.tele2.ru
  • Password: do not fill in

Win Mobile - manual Internet settings on iPhone.

  • APN: internet
  • Username: leave blank
  • Password: do not fill in

Wave Mobile - manual Internet settings on iPhone.

  • APN: internet
  • Username: internet
  • Password: internet

Yota - manual Internet settings on iPhone.

  • APN: internet.yota
  • Username: leave blank
  • Password: do not fill in

In most cases, when you install in iPhone SIM card operator, then the Internet connection is established automatically.

When entering parameters manually, while in the “Cellular Data Network” section, in the “Cellular Data”, “LTE Settings (optional)” and “Modem Mode” sections, fill in the data in the same way. After you have entered the connection parameters manually, you need to disconnect the smartphone from the power supply for 1-3 minutes, and then turn it on again.

3. Turn on the Internet

To do this, go to: “Settings” > “Cellular” and set the “Cellular Data” switch to the On position, that is, green.

4. Enable modem mode

  • Go to “Settings”, where you find the line “Modem mode” and click on it.
  • Turn on modem mode.

For convenience, in the “Wi-Fi Password” line, an automatically generated password is immediately displayed to you. In case you want to access the Internet from another device via iPhone via a wi-fi network. Other connection methods are also available: USB cable and Bluetooth.

If you have any questions, or want to get more detailed advice, write to us on social networks, or call:

Our phone number: +7 978 773 77 77

Access to free Wi-Fi Unfortunately, it is not available everywhere and this often causes serious problems. If you don’t have a 3G modem at hand, then it would seem like it’s time to start despairing. However, not many people know that using their iPhone, any user can create an Internet access point and distribute Wi-Fi to other devices.

Apply this opportunity you can do whatever you want: help out friends who have run out of traffic on their smartphones, access the Internet with iPad Wi-Fi only or connect the same laptop while on the train. The best part is that setting up an access point, unlike routers various models, on iPhone will take you have less than a minute.

Step 1: Make sure the menu Settings -> cellular switches activated Cellular data And Enable 3G

Step 2: Go back to the menu Settings and go to Modem mode

Step 3: Activate the Slider Modem mode. If Bluetooth is turned off, the system will give you a pop-up message asking you to activate it. If your computer has a Bluetooth adapter, then select Enable Bluetooth for further connection

Step 4. Specify what you want Wi-Fi password connections

After completing these simple steps, you will be able to connect to the Internet from another device or directly from your computer. And if the situation with Wi-Fi connection is clear - you just need to scan the space for active wireless networks from any device that has Wi-Fi, then the case of connecting via USB needs to be analyzed in more detail.

In order to access the Internet from a PC using your iPhone as a modem using a USB cable, you need to:

  • Connect iPhone to computer
  • Go to Control Panel -> Network and Internet ->View network status and tasks and make sure that the connection is activated
  • If this connection is not shown, restart your computer and connect your iPhone again

Attention: may be required reinstalling iTunes(it is advisable to use the current version).

Provides fast access to a portable modem feature that allows users to share mobile internet with other devices via Wi-Fi connection, USB cable or pairing using Bluetooth.

At Wi-Fi distribution, Your phone becomes portable router, the name of which will be displayed in the list on other devices. After clicking on the name of the access point, enter the password and use the Internet.

Similarly, you can share the Internet via Bluetooth connection. To do this, turn on Bluetooth on both devices to establish a connection and allow data exchange. This will be enough for the Internet to appear on the connected device.

With connection via USB cable everything is much simpler: connect iPhone cable, for example, to personal computer, turn on the access point and no more settings.

Still, how to enable modem mode in iPhone 7? Use the instructions below and share the Internet with other devices:

Changing personal modem settings

  • On the iPhone 7 tethering mode settings page, you can change the password Wi-Fi networks to your personal one, since the standard one can be randomly generated and complex. Simply click on the password field and a keyboard will appear for you to enter.
  • Just like the password, you can change the phone name, which will be displayed in the list available networks on laptops, tablets and all devices with wireless connection to the network. You only need to configure the modem mode once and it will be valid for all applications.

Features of the modem function in iPhone 7

IN operating system iOS 10 enabling mode is similar to versions of earlier iPhones, but there are some differences that users will appreciate. Of these, a convenient indicator of the number of gadgets that use the connection stands out. Users who use an iPhone as a modem on the original firmware can see how much data they have used without using special programs.

iPhone 7 displays the number of connected devices on the lock screen!

On the lock screen, in the status bar, when the distribution function is turned on, a small number will appear on the display next to the connection icon, which tells the user how many gadgets are connected to the phone. If you connect with another gadget and see in the status bar the number of devices displayed is not 1, but several, it means that a neighbor or another phone has joined your iPhone. In this case, it is enough to simply change set password, and no one else will be able to use your traffic and Internet. This mode allows you to use up to five devices simultaneously.


2024 gtavrl.ru.