Dre 5001 firmware. Equipment for digital television is what you can buy in our store


The DRS-5001 receiver is a budget model. The compact silver body contains buttons for switching TV channels, a button for switching modes and TV/R.

Indication is carried out using a four-digit segment display. In operating mode, the display shows the current channel number, and in standby mode, the time. There is a hinged cover on the front panel, behind which there is a CI slot. Thanks to a set of interface connectors, you can connect the appropriate external equipment.

The rear panel of the receiver is equipped with:

  • two F-type sockets LNB IN and loop output LNB OUT;
  • two EuroScart connectors (TV and AUX);
  • audio outputs R/L and VIDEO (RCA type);
  • optical digital audio output S/PDIF;
  • an input for connecting an terrestrial TV antenna RF IN and a UHF modulator output for connecting a TV using the RF OUT frequency;
  • RS-232 data port connector;
  • power switch.

Using the menu system settings you can define the following parameters:

  • time and date;
  • menu language (German, Russian, French and English);
  • primary and secondary radio language;
  • video output mode;
  • audio output format;
  • display installation;
  • parental control function;
  • event timers.

DRS-5001 receiver supports a large number of service functions.

Service functions

The DRS-5001 receiver supports a wide range of information service functions: Thanks to the multi-day extended EPG, the information of the “ ”, “ ” and “ ” packages is displayed correctly. Broadcast Help provides users with information about channels, the current program, panoramic audio, subtitles and teletext. The indicator displays reliable information about the level of the received signal. This receiver supports OSD and VBI teletext. Thanks to the built-in teletext decoder, viewers can display teletext even using characters from national alphabets. By using software You can select the type of subtitles that are displayed on the screen.

Using the OSD menu you can organize the list of TV channels. Users have the opportunity to sort the viewing list (the current list can be sorted alphabetically), create favorite channel lists (selection filters greatly simplify the ordering of the list of TV channels), edit channel lists (deleting, renaming, moving, blocking operations are available).

Tuner DRS-5001 showed good results when testing. This device provides the opportunity to watch TV channels included in the packages satellite operator"Tricolor TV", and can also be used to receive other open and paid programs.

To update software via satellite, the receiver must be connected to a configured satellite dish.

PROCEDURE:

1.Unplug the receiver's power cord from the outlet, and then plug the receiver back into the power supply.

2. Switch the receiver to the Tricolor TV info channel.

3. After a few seconds, the following message will appear on the screen indicating the need to update the receiver software:

When of this message select the “Yes” option and press the “OK” button on the remote control.

4. After agreeing to update the receiver software, service messages about the process of updating the receiver software will appear on the screen. Updating the receiver software takes about three minutes.




5. Once the software update is complete, the receiver will reboot and turn on in channel viewing mode.

6. After the software update is completed, go to the “Status” menu and make sure that the receiver software version has changed to 3.4.432.


7. At this point, the receiver software update is completed, and the receiver is ready for further operation.

Video instructions for updating the software of receivers models DRE-4000, DRE-5000, DRS-5001, DRS-5003, DRE-7300 and GS-7300

How to update the Tricolor channel list on DRE-4000, DRE-5000, DRS-5001, DRS-5003, DRE-7300 and GS-7300 receivers

Updating the channel list may be required in several cases:

1. To find new Tricolor TV channels that are not on your receiver
2. After carrying out maintenance work on the satellite
3. When setting up the equipment for the first time
4. When changing broadcast parameters (changing frequencies) of some channels
5. Preventively twice a year

To update the channel list, press “MENU” on your receiver’s remote control, select “Search for Tricolor TV channels” => “OK” and update the list of TV channels by following the prompts on the TV screen.

For testing, we receive devices that can be divided into two classes: “branded” (developed by well-known large manufacturers) and “packet” (oriented to receive a package of programs from a specific broadcast provider). Television presented for testing satellite receiver DRS-5001 is a new terminal in the “package” line of devices designed primarily for receiving programs from the Tricolor TV digital package. The manufacturer of this product - Downridge Select Limited (Hong Kong, China) - based the development technical solutions, implemented in the DRE-5000 receiver, already known on Russian market. The electrical circuit of the prototype has undergone changes that affected:
high-frequency receiving part (tuner unit);
embedded system decoder conditional access DRE Crypt.
The DRS-5001 receiver supports an expanded set of user functions, available to the subscriber"Tricolor TV" package. With support for Common Interface compatible devices, the unit can be used to receive other MPEG-2 and MPEG-4 open source and encoded broadcasts.

Design and circuitry
The design and proportions of the DRS-5001 receiver exactly repeat the familiar features of its predecessor. It’s easy to guess whether a device belongs to a class budget models.
The receiver has a compact silver body. The number of elements located on the front panel is minimal:
mode switching button - working/standby;
switch buttons channels;
TV/R switch button.
A four-digit yellow-orange segment display is used for display. In operating mode, the display shows the number of the channel being viewed, in standby mode - current time. Additional icon segments on the display indicate the presence of a signal on the selected channel, the transition to receiving a radio channel, or the terminal being in standby mode. Behind the hinged front panel cover is the CI slot.
A set of interface connectors allows you to connect the necessary external equipment. On the rear panel of the receiver are located:
two F-type sockets LNB IN and loop output LNB OUT;
two EuroScart connectors (TV and AUX);
audio outputs R/L and VIDEO (RCA type);
optical digital audio output S/PDIF;
input for connecting an terrestrial TV antenna RF IN and output of a UHF modulator for connecting a TV using the RF OUT frequency;
RS-232 data port connector;
power switch.
The electrical circuit of the DRS-5001 receiver is located on several boards:
power unit;
motherboard. Circuit design motherboard, basically the same as the DRE-5000 receiver ( CPU STI 5518, configuration and size of memory chips). The device presented for testing is equipped with the EARDA EDS-1547FF1B+ tuner unit. The STV0288 chip is used as a QPSK demodulator. This chip has lower power consumption compared to the previously used STV0299 demodulator, a larger range of received signal flow rates;
DRE Crypt hardware decoder. Judging by appearance(pictured), the hardware decoder of the tested receiver has a different electrical diagram and a set of components in comparison with the same unit used in the DRE-4000/DRE-5000 receivers;
front panel indication and switching board.
Thanks to the horizontal layout of the RF modulator tuner block and the decoder board, the DRS-5001 receiver is housed in a relatively low cabinet.
The control circuit for the SCART connectors of the device under test is designed for the possibility of transit switching of electrical signals supplied to the AUX interface. The receiver supports broadcasting input and output signals through this connector for all video formats: composite, component, matrixed (RGB). Various audio-video equipment (VCR, DVD player, game console).
The DRS-5001 receiver is equipped with a 37-button remote control of the same design as the DRE-5000 receiver. The operation of remote control commands that call special services for subscribers of the Tricolor TV package (“TV Chat” and “TV Mail”) is supported. These services are called by the “*” and “#” buttons, respectively.
Specifications of the tested device are given in Table 1.

System settings and channel search
The OSD configuration interface of the DRS-5001 receiver is almost the same as that of the DRE-5000. Procedure initial setup simplified by using a Wizard installation. Values system parameters This mode, set by default, allows you to quickly configure the DRS-5001 receiver to receive channels from the Tricolor TV package (Eutelsat W4 satellite, 36° East).
Menu system settings allows you to determine:
date and time. The clock can be synchronized automatically (by satellite) or manual mode. The default offset is +3 hours;
menu language. Supports OSD display in four European languages: Russian, English, German and French;
primary and secondary audio languages ​​(choice of 62 languages);
video output mode. Through the TV SCART connector of the receiver, the video signal can be output in composite, component (YUV), S-Video and RGB format. Mode supported automatic switching between 4:3 and 16:9 display formats. This function was tested when viewing programs from the Kinopokaz channel of the Tricolor TV package (some films on this channel are broadcast in widescreen);
audio output format. It is possible to manually turn on the S/PDIF output;
Display settings (display format, OSD transparency level, display time and use of screen storage function);
conditions of “parental” access. You can select the level of viewing age restriction (from 4 to 18 years old in steps of 1) or mode full access;
event timers. You can set up to 32 non-overlapping timers. The event reservation service (timer activation) via EPG is supported.
BY new platform contains a number of additions to basic functions receiver interface DRE-5000:1. The item “Search for Tricolor TV channels” has appeared in the main menu. When this function is called, the current list of channels broadcast in the Tricolor TV package is updated. Using this service does not violate the previously selected configuration of user settings and channel lists of other packages saved in the receiver’s memory.2. Added functions for user services for Tricolor TV subscribers: “TV Chat” and “TV Mail”. “TV Chat” was tested on the channels “Veseloye TV” and “Teletravel”.
3. The “DRE Info” item has been added to the conditional access menu. Using this menu, a Tricolor TV subscriber can obtain information about the classes and validity periods of the subscription.
The DRS-5001 receiver allows the use of various receiving antenna systems:
fixed (one or more, switched by a DiSEqC switch). The use of DiSEqC 1.0 and DiSEqC 1.1 switching protocols is supported;
motorized, controlled by DiSEqC 1.2 or USALS positioner. The receiver allows you to produce automatic search signal in positioner setting mode. The antenna moves until it is detected and captured digital signal with the specified parameters. Testing has shown that the new software eliminates problems associated with the loss of settings for satellites of a motorized system.
In mode quick setup By default, a simple fixed receiving system is used: a converter with a local oscillator frequency of 10750 MHz, receiving signals in circular polarization.
Support for various channel search modes, combined with the ability to use various antenna system configurations, allows us to consider the DRS-5001 receiver as a universal device. The preset list of satellites contains an updated and current list of transponders and broadcast parameters for various packages at the time of testing. Support for four types of automatic search (fast, full, network, Tricolor TV) greatly simplifies setting up the receiver. Testing has shown that the DRS-5001 receiver can be used to receive both low-speed and high-speed digital packages with a range of flow rates from 2.2 to 45 Msym/s. It turned out, however, that the DRS-5001 receiver sometimes did a poor job of detecting signals from some broadcast packets. This problem was discovered in the manual and automatic search modes for packets broadcast from various satellites. In some cases, the time required to “lock” the receiver on such a broadcast exceeds several minutes. If, nevertheless, in the end, the receiver detected the signal included in such a package, then when viewing channels the problem manifested itself again: after switching or when switching to operating mode, there was no signal. Any connection between this effect and the parameters of the received signal (frequency, value symbol rate and FEC) could not be detected. We assume that the problem occurs due to insufficiently correct interaction between the receiver's motherboard and the new tuner unit.

Conditional access
The DRS-5001 terminal has two built-in conditional access systems:
hardware and software COURT DRE Crypt;
BISS software descrambler.
The operation of the DRE Crypt conditional access system of the DRS-5001 receiver was tested in the channel viewing mode of the Tricolor TV package. To connect to viewing, the following was done:
equipment registration (DRE ID terminal);
activation of a subscription card for paid channels(card “Start”).
There were no problems registering or activating the subscription. The receiver was configured to receive Tricolor TV channels and included in the paid package channel viewing mode. However, after receiving confirmation of activation of the subscription card, the channel was not decoded for a long time (about 4 hours), and the message “Scrambled channel (DRE)” was displayed on the screen. Viewing became possible only after switching to another channel. Similar problem was sometimes observed after the receiver was transferred from standby mode to working mode after a short (1-2 hour) shutdown interval. Another drawback that we noticed during testing is the significant switching time when viewing between encoded channels of the Tricolor TV package, sometimes reaching 5-7 seconds. While watching the selected channel, decoding was stable.
The BISS software descrambler supports Mode 1 conditional access mode. The values ​​of seven keys can be entered into the receiver's memory.
To test the operation of the built-in BISS descrambler, the ability to view the Stolichnoe TV channel (Express-AM22, 53° East) was checked. To test the CI interface, various types of CAM modules and original access cards were used paid packages and channels “NTV-Plus” (Eutelsat W4, 36° east) and “Orion Express” (“Express-AM2”, 80° east). The time it takes to “open” a channel when switching between encoded and open channels small (about 1-2 s).
The advantages of the device presented for testing include the possibility of sharing it with MPEG-4/MPEG-2 transcoding CI modules Viaccess Neotion Pocket NP4 and MPEG4/MPEG2 DRE Crypt CAM. Using these modules, it was possible to decode MPEG-4 broadcasts of the GPKS packet from the Express-AM1 satellite, 40° East. The switching time between MPEG-4 channels was about 3 s.
Results of checking the compatibility of the DRS-5001 receiver with various types The CAMs are shown in Table 2. During this testing, no significant problems were identified.

Service functions
The DRS-5001 receiver supports a wide range of information service functions:
multi-day extended EPG. The EPG information of the Tricolor TV, NTV-Plus and Orion-Express packages is displayed correctly;
certificate of broadcast (channel name, presence of tele-text services, subtitles, panoramic soundtrack, information about the current transmission). In our opinion, the operation of the indicator displaying the level of the received signal has been improved (compared to the DRE-5000), the readings of which have become more reliable;
teletext. Support for OSD and VBI teletext included. The built-in teletext decoder allows you to display teletext using, among other things, characters from national alphabets. However, when receiving some channels this function does not work correctly (teletext service in the GPKS package from the Express-AM1 satellite, 40° East);
subtitles. The terminal supports processing of TTX and DVB subtitles. The software allows you to select the type of subtitles displayed on the screen (DVB or TTX subtitles). The function works correctly on various channels whose broadcasts are accompanied by subtitles.
The OSD menu allows you to organize channel lists:
sorting the watch list. The current channel list displayed on the screen can be sorted alphabetically. Possibility provided quick transition inside an ordered list and switching the alphabet layout (four language options from the same set as the menu languages);
creating favorite channel lists. In total, the user can create up to 32 favorite lists. Thanks to the use of user-defined selection filters, the process of creating such lists is greatly simplified;
channel list editor (operations of deleting, moving, renaming, blocking). The editable list (“TV” or “Radio”) is displayed in the background full screen image channel being watched.

Testing of the DRS-5001 receiver showed that, despite the presence of problems, the device provides the ability to view channels of the Tricolor TV package and can be used to receive other paid and open source software.

The editors express their gratitude to the General Satellite Corporation (Russia) for providing the DRS-5001 receiver for testing.

- (not official!) - This software is developed on the basis of the official 3.4.369 (the one that will flow from the satellite 07.10.13.) The main difference between this firmware is not shown advertising banners when changing channels. Works stably.

Features of this firmware:

    2 - the submenu search for tricolor TV channels has been removed from the main menu (but it is still available in the menu >> settings >> automatic search >> search type >> tricolor TV) or when initial installation(reset to factory settings)

    3 - when entering the main menu or the game menu, the picture does not disappear!

    4 - in the main nenyu the frills on the side were removed (in my opinion it was not harmonious :))

    5 - exit from the channel list is organized by double click OK buttons (exactly the same as it is organized in 99% of all tuners)

    6 - when you pressed the game button, a swastika was displayed, searching for tricolor channels is now like a proper swastika of the game :)

    7 - the algorithm of the EPG menu has been changed - now it is much more convenient (everything can be done with just one button ok)

    8 - in the Tetris menu the ok and up buttons have swapped places

    9 - possible, but not guaranteed!!! The cause of freezes in receivers with 11 series modules has been eliminated.

    10 - the firmware has already collected the current channels as of 10/05/2013, all garbage has been removed!!!

Past releases

The procedure is quite simple and does not require special skills from subscribers; you just need to follow the instructions for replacing the software from the info channel. The update process takes some time and you need to be patient and wait for it to finish. But despite all the warnings, some users do not wait for the software update process to complete and, as a result, the receiver stops working.

Practice shows that in very rare cases, even after waiting for the software update to complete, the receiver may not turn on after a reboot. There is only one diagnosis - a software update failure.

But don't despair. You can fix this yourself and at home, if you have a computer or another similar working receiver at hand. Below is how to do this. Helps in 99% of cases of unsuccessful software update from satellite.

Software update from a computer.

1. We purchase / solder ourselves null modem cable

2. Disconnect the receiver and computer from the network.

3. Connect the RS232 input of the receiver to the COM port on the computer.

4. Turn on the computer.

5. unpack and install the program

6. and unpack the required firmware receiver:

7. Launch the program (the shortcut should appear on the desktop).

The following window will appear.


8. Click the Open File button and select the downloaded file with the firmware in the window that opens, having previously unzipped it.

9. Click on the Upload button, connect the receiver to the network and turn it on Power button behind the receiver.


10. The progress bar for the File uploading process will begin to show the % and time remaining until the software download process is completed.


In this case, the digital display of the receiver will display the letter L (Load) and the % of the process completed.


11. After this, the progress indicator of the Burning process will begin to show % and the time until the end of the process of burning (firmware) software.


In this case, the digital display of the receiver will display the letter b (burn) and the % of the process completed.


12. The software update process is complete. Turn off the receiver and computer. Disconnect the null modem cable.

Record ID: 35 does not exist!

Software update from the receiver (using the example of DRE 5000).

For DRE 4000, DRE 5001, DRE 7300 the process is similar.

1. We purchase / solder ourselvesnull modem cable.
2. Disconnect the receivers from the network.
3. A working receiver must be connected to the TV. The problematic receiver does not connect to the TV.
4. We connect both receivers with a null modem cable.

The picture above shows a working receiver. Below is a problematic receiver.
4-2. Turn on the working receiver.
4-3. Enter the menu and select Settings.

5. Enter PIN. The default is 0000 (four zeros).

6. In the Settings menu, select Data transfer.

7. A window will appear:


Press the blue button on the remote control.
8. Two scales appear. And the Data Processing scale will begin to fill.


9. When the jackal’s data processing reaches 100%, the following message appears:


10. Turn on the non-working receiver - plug it into the network and turn on Power on the back of the receiver.
11. The filling of the lower scale has begun.


The indicators of the receivers will display the progress of the data transfer/download process in % (on the display there is a symbol L – Load, loading, on the lower receiver, 5 – transmission, on the upper receiver).


12. After this, the following will appear on the TV:


Do not turn off the receivers!!! The process of writing firmware to the (faulty) receiver being flashed begins. In this case, the process will NOT be indicated on the TV screen. The indication process is visible on the display of the receiver being flashed (on the display there is a symbol b - burn, on the lower receiver).


13. We are waiting for the indicator on the receiver being flashed to reach 100%. Afterwards, the receiver being flashed will reboot and the display will show the following:


14. The firmware process is completed. Using the remote control to the question “Data transfer complete. Repeat?" select “NO”. Turn off the receivers and disconnect the null modem cable.

Equipment for digital television- this is what you can buy in our store. Our company operates in the market of broadcast and satellite equipment since 2003 and we already know most of our clients by sight.
For regular customers of our online store there is a system of discounts, which are calculated automatically according to the coupon number assigned to you personally.
All equipment undergoes pre-sale preparation, namely installation latest version Software for satellite and broadcast consoles. All receivers are tested for functionality.
Our company delivers equipment both in Moscow and throughout Russia. Most courier delivery companies have agreements on preferential delivery prices.
In our online store you can find almost any equipment that you may need to receive satellite and terrestrial television. We have tried to make the ordering process convenient for anyone. If you plan to order not one item, but several, then you can use the store search and pay attention to the accompanying equipment. If you want to pick up equipment for receiving satellite TV, then you should go to the tab menu " Satellite television", if for receiving terrestrial or cable TV, then " Terrestrial television" etc. If you have questions during the ordering process, you can use online chat, which is located on every page of the online store or order back call.
We hope that in the online digital TV store you will be able to spend minimal amount time to order the required equipment.


2024 gtavrl.ru.